blob: 81edf4ab57424e52d098f7e30ea80a9c1261a074 [file] [log] [blame]
# Cryptography primitive options for mbed TLS
# Copyright (c) 2016 Intel Corporation
# SPDX-License-Identifier: Apache-2.0
config ZEPHYR_MBEDTLS_MODULE
bool
config MBEDTLS_PROMPTLESS
bool
help
Symbol to disable the prompt for MBEDTLS selection.
This symbol may be used internally in a Kconfig tree to hide the
mbed TLS menu prompt and instead handle the selection of MBEDTLS from
dependent sub-configurations and thus prevent stuck symbol behavior.
menuconfig MBEDTLS
bool "mbed TLS Support" if !MBEDTLS_PROMPTLESS
help
This option enables the mbedTLS cryptography library.
if MBEDTLS
choice MBEDTLS_IMPLEMENTATION
prompt "Select implementation"
default MBEDTLS_BUILTIN
config MBEDTLS_BUILTIN
bool "Use Zephyr in-tree mbedTLS version"
help
Link with mbedTLS sources included with Zephyr distribution.
Included mbedTLS version is well integrated with and supported
by Zephyr, and the recommended choice for most users.
config MBEDTLS_LIBRARY
bool "Use external mbedTLS library"
help
Use external, out-of-tree prebuilt mbedTLS library. For advanced
users only.
endchoice
config CUSTOM_MBEDTLS_CFG_FILE
bool "Custom mbed TLS configuration file"
help
Allow user defined input for the MBEDTLS_CFG_FILE setting.
You can specify the actual configuration file using the
MBEDTLS_CFG_FILE setting.
config MBEDTLS_CFG_FILE
string "mbed TLS configuration file" if CUSTOM_MBEDTLS_CFG_FILE
depends on MBEDTLS_BUILTIN
default "config-tls-generic.h"
help
Use a specific mbedTLS configuration file. The default config file
file can be tweaked with Kconfig. The default configuration is
suitable to communicate with majority of HTTPS servers on the Internet,
but has relatively many features enabled. To optimize resources for
special TLS usage, use available Kconfig options, or select an
alternative config.
rsource "Kconfig.tls-generic"
config MBEDTLS_SSL_MAX_CONTENT_LEN
int "Max payload size for TLS protocol message"
default 1500
depends on MBEDTLS_BUILTIN
help
The TLS standards mandate max payload size of 16384 bytes. So, for
maximum operability and for general-purpose usage, that value must
be used. For specific usages, that value can be largely decreased.
E.g. for DTLS, payload size is limited by UDP datagram size, and
even for HTTPS REST API, the payload can be limited to max size of
(REST request, REST response, server certificate(s)).
mbedTLS uses this value separate for input and output buffers, so
twice this value will be allocated (on mbedTLS own heap, so the
value of MBEDTLS_HEAP_SIZE should accommodate that).
module = MBEDTLS
module-str = Log level mbedTLS library debug hook
source "subsys/logging/Kconfig.template.log_config"
config MBEDTLS_DEBUG
bool "mbed TLS debug activation"
help
Enable debugging activation for mbed TLS configuration. If you use
mbedTLS/Zephyr integration (e.g. native TLS sockets), this will
activate debug logging.
If you use mbedTLS directly instead, you will need to perform
additional configuration yourself: call
mbedtls_ssl_conf_dbg(&mbedtls.conf, zephyr_mbedtls_debug, NULL);
function in your application. Alternatively implement your own debug
hook function if zephyr_mbedtls_debug() doesn't suit your needs.
if MBEDTLS_DEBUG
config MBEDTLS_DEBUG_LEVEL
int
default 4 if MBEDTLS_LOG_LEVEL_DBG
default 3 if MBEDTLS_LOG_LEVEL_INF
default 2 if MBEDTLS_LOG_LEVEL_WRN
default 1 if MBEDTLS_LOG_LEVEL_ERR
default 0
range 0 4
help
Default mbed TLS debug logging level for Zephyr integration code
(from ext/lib/crypto/mbedtls/include/mbedtls/debug.h):
0 No debug
1 Error
2 State change
3 Information
4 Verbose
This makes Zephyr call mbedtls_debug_set_threshold() function during
mbedTLS initialization, with the configured debug log level.
choice MBEDTLS_DEBUG_EXTRACT_BASENAME
prompt "Extract basename from filenames"
default MBEDTLS_DEBUG_EXTRACT_BASENAME_AT_BUILDTIME if "$(ZEPHYR_TOOLCHAIN_VARIANT)" = "zephyr"
default MBEDTLS_DEBUG_EXTRACT_BASENAME_AT_RUNTIME
config MBEDTLS_DEBUG_EXTRACT_BASENAME_AT_BUILDTIME
bool "Buildtime"
help
Adds compile options, which should convert full source paths in
__FILE__ macro to files' basenames. This will reduce code footprint
when debug messages are enabled.
This is compiler dependent, so if it does not work then please
fallback to MBEDTLS_DEBUG_EXTRACT_BASENAME_AT_RUNTIME instead.
config MBEDTLS_DEBUG_EXTRACT_BASENAME_AT_RUNTIME
bool "Runtime"
help
Filename passed as argument to debug hook will be stripped from
directory, so that only basename part is left and logged.
config MBEDTLS_DEBUG_EXTRACT_BASENAME_DISABLED
bool "Disabled"
help
Disable basename extraction from filenames in log mesasges. This will
result in full paths or paths relative to west root directory
appearing in log messages generated by mbedTLS library.
endchoice
config MBEDTLS_DEBUG_STRIP_NEWLINE
bool "Strip newlines"
default y
help
Attempt to strip last character from logged string when it is a
newline.
endif # MBEDTLS_DEBUG
config MBEDTLS_MEMORY_DEBUG
bool "mbed TLS memory debug activation"
depends on MBEDTLS_BUILTIN
help
Enable debugging of buffer allocator memory issues. Automatically
prints (to stderr) all (fatal) messages on memory allocation
issues. Enables function for 'debug output' of allocated memory.
config MBEDTLS_TEST
bool "Compile internal self test functions"
depends on MBEDTLS_BUILTIN
help
Enable self test function for the crypto algorithms
config MBEDTLS_INSTALL_PATH
string "mbedTLS install path"
depends on MBEDTLS_LIBRARY
help
This option holds the path where the mbedTLS libraries and headers are
installed. Make sure this option is properly set when MBEDTLS_LIBRARY
is enabled otherwise the build will fail.
config MBEDTLS_ENABLE_HEAP
bool "Global heap for mbed TLS"
help
This option enables the mbedtls to use the heap. This setting must
be global so that various applications and libraries in Zephyr do not
try to do this themselves as there can be only one heap defined
in mbedtls. If this is enabled, then the Zephyr will, during the device
startup, initialize the heap automatically.
config MBEDTLS_HEAP_SIZE
int "Heap size for mbed TLS"
default 10240 if OPENTHREAD_COMMISSIONER || OPENTHREAD_JOINER
default 512
depends on MBEDTLS_ENABLE_HEAP
help
The mbedtls routines will use this heap if enabled.
See ext/lib/crypto/mbedtls/include/mbedtls/config.h and
MBEDTLS_MEMORY_BUFFER_ALLOC_C option for details. That option is not
enabled by default.
Default value for the heap size is not set as it depends on the
application. For streaming communication with arbitrary (HTTPS)
servers on the Internet, 32KB + overheads (up to another 20KB) may
be needed. For some dedicated and specific usage of mbedtls API, the
1000 bytes might be ok.
config MBEDTLS_SHELL
bool "mbed TLS shell"
depends on MBEDTLS
depends on SHELL
help
Enable mbed TLS shell module, which allows to show debug information
about mbed TLS library, such as heap usage.
config MBEDTLS_ZEPHYR_ENTROPY
bool "mbed TLS entropy source based on Zephyr entropy driver"
depends on MBEDTLS
help
This option enables the entropy source based on Zephyr entropy driver
for mbed TLS. The entropy source is registered automatically during
system initialization.
config APP_LINK_WITH_MBEDTLS
bool "Link 'app' with MBEDTLS"
default y
help
Add MBEDTLS header files to the 'app' include path. It may be
disabled if the include paths for MBEDTLS are causing aliasing
issues for 'app'.
endif # MBEDTLS