drivers/gpio/gpio_xlnx_axi.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2020 Henrik Brix Andersen <henrik@brixandersen.dk>
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #define DT_DRV_COMPAT xlnx_xps_gpio_1_00_a

 #include <zephyr/device.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/irq.h>
 #include <zephyr/sys/sys_io.h>

 #include <zephyr/drivers/gpio/gpio_utils.h>

 /* AXI GPIO v2 register offsets (See Xilinx PG144 for details) */
 #define GPIO_DATA_OFFSET  0x0000
 #define GPIO_TRI_OFFSET   0x0004
 #define GPIO2_OFFSET      0x0008
 #define GPIO2_DATA_OFFSET 0x0008
 #define GPIO2_TRI_OFFSET  0x000c
 #define GIER_OFFSET       0x011c
 #define IPISR_OFFSET      0x0120
 #define IPIER_OFFSET      0x0128

 /* GIER bit definitions */
 #define GIER_GIE BIT(31)

 /* IPISR and IPIER bit definitions */
 #define IPIXX_CH1_IE BIT(0)
 #define IPIXX_CH2_IE BIT(1)

 /* Maximum number of GPIOs supported per channel */
 #define MAX_GPIOS 32

 struct gpio_xlnx_axi_config {
 	/* gpio_driver_config needs to be first */
 	struct gpio_driver_config common;
 	mm_reg_t base;
 	uint8_t channel;
 	bool all_inputs: 1;
 	bool all_outputs: 1;
 	bool interrupts_available: 1;
 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 	void (*irq_config_func)(const struct device *dev);
 #endif
 };

 struct gpio_xlnx_axi_data {
 	/* gpio_driver_data needs to be first */
 	struct gpio_driver_data common;
 	/* Shadow registers for data out and tristate */
 	uint32_t dout;
 	uint32_t tri;
 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 	uint32_t previous_data_reading;
 	sys_slist_t callbacks;
 	uint32_t rising_edge_interrupts;
 	uint32_t falling_edge_interrupts;
 	/* Workaround to handle channel 2 interrupts from channel 1*/
 	const struct device *other_channel_device;
 #endif
 };

 static inline uint32_t gpio_xlnx_axi_read_data(const struct device *dev)
 {
 	const struct gpio_xlnx_axi_config *config = dev->config;

 	return sys_read32(config->base + (config->channel * GPIO2_OFFSET) + GPIO_DATA_OFFSET);
 }

 static inline void gpio_xlnx_axi_write_data(const struct device *dev, uint32_t val)
 {
 	const struct gpio_xlnx_axi_config *config = dev->config;

 	sys_write32(val, config->base + (config->channel * GPIO2_OFFSET) + GPIO_DATA_OFFSET);
 }

 static inline void gpio_xlnx_axi_write_tri(const struct device *dev, uint32_t val)
 {
 	const struct gpio_xlnx_axi_config *config = dev->config;

 	sys_write32(val, config->base + (config->channel * GPIO2_OFFSET) + GPIO_TRI_OFFSET);
 }

 static int gpio_xlnx_axi_pin_configure(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
 {
 	const struct gpio_xlnx_axi_config *config = dev->config;
 	struct gpio_xlnx_axi_data *data = dev->data;
 	unsigned int key;

 	if (!(BIT(pin) & config->common.port_pin_mask)) {
 		return -EINVAL;
 	}

 	if (((flags & GPIO_INPUT) != 0) && ((flags & GPIO_OUTPUT) != 0)) {
 		return -ENOTSUP;
 	}

 	if ((flags & GPIO_SINGLE_ENDED) != 0) {
 		return -ENOTSUP;
 	}

 	if ((flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) != 0) {
 		return -ENOTSUP;
 	}

 	if (((flags & GPIO_INPUT) != 0) && config->all_outputs) {
 		return -ENOTSUP;
 	}

 	if (((flags & GPIO_OUTPUT) != 0) && config->all_inputs) {
 		return -ENOTSUP;
 	}

 	key = irq_lock();

 	switch (flags & GPIO_DIR_MASK) {
 	case GPIO_INPUT:
 		data->tri |= BIT(pin);
 		break;
 	case GPIO_OUTPUT:
 		if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0) {
 			data->dout |= BIT(pin);
 		} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0) {
 			data->dout &= ~BIT(pin);
 		}
 		data->tri &= ~BIT(pin);
 		break;
 	default:
 		return -ENOTSUP;
 	}

 	gpio_xlnx_axi_write_data(dev, data->dout);
 	gpio_xlnx_axi_write_tri(dev, data->tri);

 	irq_unlock(key);

 	return 0;
 }

 static int gpio_xlnx_axi_port_get_raw(const struct device *dev, gpio_port_value_t *value)
 {
 	*value = gpio_xlnx_axi_read_data(dev);
 	return 0;
 }

 static int gpio_xlnx_axi_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
 					     gpio_port_value_t value)
 {
 	struct gpio_xlnx_axi_data *data = dev->data;
 	unsigned int key;

 	key = irq_lock();
 	data->dout = (data->dout & ~mask) | (mask & value);
 	gpio_xlnx_axi_write_data(dev, data->dout);
 	irq_unlock(key);

 	return 0;
 }

 static int gpio_xlnx_axi_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins)
 {
 	struct gpio_xlnx_axi_data *data = dev->data;
 	unsigned int key;

 	key = irq_lock();
 	data->dout |= pins;
 	gpio_xlnx_axi_write_data(dev, data->dout);
 	irq_unlock(key);

 	return 0;
 }

 static int gpio_xlnx_axi_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins)
 {
 	struct gpio_xlnx_axi_data *data = dev->data;
 	unsigned int key;

 	key = irq_lock();
 	data->dout &= ~pins;
 	gpio_xlnx_axi_write_data(dev, data->dout);
 	irq_unlock(key);

 	return 0;
 }

 static int gpio_xlnx_axi_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins)
 {
 	struct gpio_xlnx_axi_data *data = dev->data;
 	unsigned int key;

 	key = irq_lock();
 	data->dout ^= pins;
 	gpio_xlnx_axi_write_data(dev, data->dout);
 	irq_unlock(key);

 	return 0;
 }

 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 /**
  * Enables interrupts for the given pins on the channel
  * The axi gpio can only enable interrupts for an entire port, so we need to track
  * the pins and modes ourselves.
  */
 static int gpio_xlnx_axi_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
 						 enum gpio_int_mode mode, enum gpio_int_trig trig)
 {
 	const struct gpio_xlnx_axi_config *config = dev->config;
 	struct gpio_xlnx_axi_data *data = dev->data;
 	const uint32_t pin_mask = BIT(pin);
 	const uint32_t chan_mask = BIT(config->channel);
 	unsigned int key;
 	uint32_t enabled_interrupts;

 	if (!config->interrupts_available) {
 		return -ENOTSUP;
 	}

 	if ((mode & GPIO_INT_ENABLE) && !(mode & GPIO_INT_EDGE)) {
 		/* only edge detection is supported */
 		return -ENOTSUP;
 	}

 	key = irq_lock();

 	data->rising_edge_interrupts &= ~pin_mask;
 	data->falling_edge_interrupts &= ~pin_mask;

 	if (mode & GPIO_INT_ENABLE) {
 		if (trig & GPIO_INT_HIGH_1) {
 			data->rising_edge_interrupts |= pin_mask;
 		}
 		if (trig & GPIO_INT_LOW_0) {
 			data->falling_edge_interrupts |= pin_mask;
 		}
 	}

 	/* if there's at least one pin interrupt enabled on the channel, enable the interrupts
 	 * for that entire channel without changing the other channel
 	 */
 	enabled_interrupts = sys_read32(config->base + IPIER_OFFSET);
 	if (data->rising_edge_interrupts || data->falling_edge_interrupts) {
 		if (!(enabled_interrupts & chan_mask)) {
 			/* Clear any pending interrupts and update last state before enabling
 			 * interrupt
 			 */
 			if (sys_read32(config->base + IPISR_OFFSET) & chan_mask) {
 				sys_write32(chan_mask, config->base + IPISR_OFFSET);
 			}
 			data->previous_data_reading = gpio_xlnx_axi_read_data(dev);

 			enabled_interrupts |= chan_mask;
 		}
 	} else {
 		enabled_interrupts &= ~chan_mask;
 	}
 	sys_write32(enabled_interrupts, config->base + IPIER_OFFSET);

 	irq_unlock(key);
 	return 0;
 }
 #endif

 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 static int gpio_xlnx_axi_manage_callback(const struct device *dev, struct gpio_callback *callback,
 					 bool set)
 {
 	struct gpio_xlnx_axi_data *data = dev->data;

 	return gpio_manage_callback(&data->callbacks, callback, set);
 }
 #endif

 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 /**
  * Returns the pins on this devices channel which changed and also have an interrupt enabled on that
  * pin. Also clears the pending interrupt for that channel.
  */
 static uint32_t gpio_xlnx_axi_get_pending_int(const struct device *dev)
 {
 	const struct gpio_xlnx_axi_config *config = dev->config;
 	struct gpio_xlnx_axi_data *data = dev->data;
 	const uint32_t chan_mask = BIT(config->channel);
 	unsigned int key;
 	uint32_t interrupt_flags;
 	uint32_t current_data;
 	uint32_t changed_pins;
 	uint32_t changed_and_rising_edge;
 	uint32_t changed_and_falling_edge;
 	uint32_t interrupts;

 	key = irq_lock();

 	/* make sure interrupt was for this channel */
 	interrupt_flags = sys_read32(config->base + IPISR_OFFSET);

 	if (!(interrupt_flags & chan_mask)) {
 		irq_unlock(key);
 		return 0;
 	}

 	/* clear pending interrupt for the whole channel */
 	sys_write32(chan_mask, config->base + IPISR_OFFSET);

 	/* find which pins changed and also have an interrupt enabled */
 	current_data = gpio_xlnx_axi_read_data(dev);
 	changed_pins = current_data ^ data->previous_data_reading;
 	data->previous_data_reading = current_data;
 	changed_and_rising_edge = (changed_pins & current_data);
 	changed_and_falling_edge = (changed_pins & ~current_data);
 	interrupts = (changed_and_rising_edge & data->rising_edge_interrupts) |
 		     (changed_and_falling_edge & data->falling_edge_interrupts);

 	irq_unlock(key);
 	return interrupts;
 }
 #endif

 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 static void gpio_xlnx_axi_isr(const struct device *dev)
 {
 	struct gpio_xlnx_axi_data *data = dev->data;

 	gpio_fire_callbacks(&data->callbacks, dev, gpio_xlnx_axi_get_pending_int(dev));

 	/* Since both channels use the same interrupt, only the first channel registers the ISR.
 	 * If the second channel is also enabled, then check for any events on it as well.
 	 */
 	if (data->other_channel_device) {
 		struct gpio_xlnx_axi_data *other_data = data->other_channel_device->data;

 		gpio_fire_callbacks(&other_data->callbacks, data->other_channel_device,
 				    gpio_xlnx_axi_get_pending_int(data->other_channel_device));
 	}
 }
 #endif

 static int gpio_xlnx_axi_init(const struct device *dev)
 {
 	struct gpio_xlnx_axi_data *data = dev->data;

 	gpio_xlnx_axi_write_data(dev, data->dout);
 	gpio_xlnx_axi_write_tri(dev, data->tri);

 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 	const struct gpio_xlnx_axi_config *config = dev->config;

 	if (config->irq_config_func != NULL) {
 		/* Note: This is only called for the first channel, even if the second is enabled.
 		 * Need to perform the setup for both channels.
 		 * Disable all interrupts.
 		 */
 		sys_write32(0x0, config->base + IPIER_OFFSET);

 		/* Clear all pending interrupts */
 		sys_write32(sys_read32(config->base + IPISR_OFFSET), config->base + IPISR_OFFSET);

 		/* Enable global interrupts for this gpio device */
 		sys_write32(GIER_GIE, config->base + GIER_OFFSET);

 		config->irq_config_func(dev);
 	}
 #endif
 	return 0;
 }

 static DEVICE_API(gpio, gpio_xlnx_axi_driver_api) = {
 	.pin_configure = gpio_xlnx_axi_pin_configure,
 	.port_get_raw = gpio_xlnx_axi_port_get_raw,
 	.port_set_masked_raw = gpio_xlnx_axi_port_set_masked_raw,
 	.port_set_bits_raw = gpio_xlnx_axi_port_set_bits_raw,
 	.port_clear_bits_raw = gpio_xlnx_axi_port_clear_bits_raw,
 	.port_toggle_bits = gpio_xlnx_axi_port_toggle_bits,
 #if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
 	.pin_interrupt_configure = gpio_xlnx_axi_pin_interrupt_configure,
 	.manage_callback = gpio_xlnx_axi_manage_callback,
 	.get_pending_int = gpio_xlnx_axi_get_pending_int,
 #endif
 };

 #define GPIO_XLNX_AXI_GPIO2_HAS_COMPAT_STATUS_OKAY(n)                                              \
 	UTIL_AND(DT_NODE_HAS_COMPAT(DT_INST_CHILD(n, gpio2), xlnx_xps_gpio_1_00_a_gpio2),          \
 		 DT_NODE_HAS_STATUS_OKAY(DT_INST_CHILD(n, gpio2)))

 #define GPIO_XLNX_AXI_GPIO2_COND_INIT(n)                                                           \
 	IF_ENABLED(UTIL_AND(DT_INST_PROP_OR(n, xlnx_is_dual, 1),                                   \
 			    GPIO_XLNX_AXI_GPIO2_HAS_COMPAT_STATUS_OKAY(n)),                        \
 		   (GPIO_XLNX_AXI_GPIO2_INIT(n)));

 #define GPIO_XLNX_AXI_GPIO2_INIT(n)                                                                \
 	static struct gpio_xlnx_axi_data gpio_xlnx_axi_##n##_2_data = {                            \
 		.dout = DT_INST_PROP_OR(n, xlnx_dout_default_2, 0),                                \
 		.tri = DT_INST_PROP_OR(n, xlnx_tri_default_2, GENMASK(MAX_GPIOS - 1, 0)),          \
 	};                                                                                         \
                                                                                                    \
 	static const struct gpio_xlnx_axi_config gpio_xlnx_axi_##n##_2_config = {                  \
 		.common =                                                                          \
 			{                                                                          \
 				.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_NGPIOS(                   \
 					DT_INST_PROP_OR(n, xlnx_gpio2_width, MAX_GPIOS)),          \
 			},                                                                         \
 		.base = DT_INST_REG_ADDR(n),                                                       \
 		.channel = 1,                                                                      \
 		.all_inputs = DT_INST_PROP_OR(n, xlnx_all_inputs_2, 0),                            \
 		.all_outputs = DT_INST_PROP_OR(n, xlnx_all_outputs_2, 0),                          \
 		.interrupts_available = DT_INST_NODE_HAS_PROP(n, interrupts)};                     \
                                                                                                    \
 	DEVICE_DT_DEFINE(DT_INST_CHILD(n, gpio2), &gpio_xlnx_axi_init, NULL,                       \
 			 &gpio_xlnx_axi_##n##_2_data, &gpio_xlnx_axi_##n##_2_config, PRE_KERNEL_1, \
 			 CONFIG_GPIO_INIT_PRIORITY, &gpio_xlnx_axi_driver_api);

 #define GPIO_XLNX_AXI_INIT(n)                                                                      \
 	IF_ENABLED(DT_INST_NODE_HAS_PROP(n, interrupts),                                           \
 		   (static void gpio_xlnx_axi_##n##_irq_config(const struct device *dev);))        \
                                                                                                    \
 	GPIO_XLNX_AXI_GPIO2_COND_INIT(n);                                                          \
                                                                                                    \
 	static struct gpio_xlnx_axi_data gpio_xlnx_axi_##n##_data = {                              \
 		.dout = DT_INST_PROP_OR(n, xlnx_dout_default, 0),                                  \
 		.tri = DT_INST_PROP_OR(n, xlnx_tri_default, GENMASK(MAX_GPIOS - 1, 0)),            \
 		IF_ENABLED(UTIL_AND(UTIL_AND(DT_INST_NODE_HAS_PROP(n, interrupts),                 \
 					     DT_INST_PROP_OR(n, xlnx_is_dual, 1)),                 \
 				    GPIO_XLNX_AXI_GPIO2_HAS_COMPAT_STATUS_OKAY(n)),                \
 			   (.other_channel_device = DEVICE_DT_GET(DT_INST_CHILD(n, gpio2))))};     \
                                                                                                    \
 	static const struct gpio_xlnx_axi_config gpio_xlnx_axi_##n##_config = {                    \
 		.common =                                                                          \
 			{                                                                          \
 				.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_NGPIOS(                   \
 					DT_INST_PROP_OR(n, xlnx_gpio_width, MAX_GPIOS)),           \
 			},                                                                         \
 		.base = DT_INST_REG_ADDR(n),                                                       \
 		.channel = 0,                                                                      \
 		.all_inputs = DT_INST_PROP_OR(n, xlnx_all_inputs, 0),                              \
 		.all_outputs = DT_INST_PROP_OR(n, xlnx_all_outputs, 0),                            \
 		.interrupts_available = DT_INST_NODE_HAS_PROP(n, interrupts),                      \
 		IF_ENABLED(DT_INST_NODE_HAS_PROP(n, interrupts),                                   \
 			   (.irq_config_func = gpio_xlnx_axi_##n##_irq_config))};                  \
                                                                                                    \
 	IF_ENABLED(DT_INST_NODE_HAS_PROP(n, interrupts),                                           \
 		   (static void gpio_xlnx_axi_##n##_irq_config(const struct device *dev)           \
 		    {                                                                              \
 			   ARG_UNUSED(dev);                                                        \
                                                                                                    \
 			   IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority),                  \
 				       gpio_xlnx_axi_isr, DEVICE_DT_INST_GET(n), 0);               \
                                                                                                    \
 			   irq_enable(DT_INST_IRQN(n));                                            \
 		   }))                                                                             \
                                                                                                    \
 	DEVICE_DT_INST_DEFINE(n, gpio_xlnx_axi_init, NULL, &gpio_xlnx_axi_##n##_data,              \
 			      &gpio_xlnx_axi_##n##_config, PRE_KERNEL_1,                           \
 			      CONFIG_GPIO_INIT_PRIORITY, &gpio_xlnx_axi_driver_api);

 DT_INST_FOREACH_STATUS_OKAY(GPIO_XLNX_AXI_INIT)
	/*
	* Copyright (c) 2020 Henrik Brix Andersen <henrik@brixandersen.dk>
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#define DT_DRV_COMPAT xlnx_xps_gpio_1_00_a

	#include <zephyr/device.h>
	#include <zephyr/drivers/gpio.h>
	#include <zephyr/irq.h>
	#include <zephyr/sys/sys_io.h>

	#include <zephyr/drivers/gpio/gpio_utils.h>

	/* AXI GPIO v2 register offsets (See Xilinx PG144 for details) */
	#define GPIO_DATA_OFFSET 0x0000
	#define GPIO_TRI_OFFSET 0x0004
	#define GPIO2_OFFSET 0x0008
	#define GPIO2_DATA_OFFSET 0x0008
	#define GPIO2_TRI_OFFSET 0x000c
	#define GIER_OFFSET 0x011c
	#define IPISR_OFFSET 0x0120
	#define IPIER_OFFSET 0x0128

	/* GIER bit definitions */
	#define GIER_GIE BIT(31)

	/* IPISR and IPIER bit definitions */
	#define IPIXX_CH1_IE BIT(0)
	#define IPIXX_CH2_IE BIT(1)

	/* Maximum number of GPIOs supported per channel */
	#define MAX_GPIOS 32

	struct gpio_xlnx_axi_config {
	/* gpio_driver_config needs to be first */
	struct gpio_driver_config common;
	mm_reg_t base;
	uint8_t channel;
	bool all_inputs: 1;
	bool all_outputs: 1;
	bool interrupts_available: 1;
	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	void (irq_config_func)(const struct device dev);
	#endif
	};

	struct gpio_xlnx_axi_data {
	/* gpio_driver_data needs to be first */
	struct gpio_driver_data common;
	/* Shadow registers for data out and tristate */
	uint32_t dout;
	uint32_t tri;
	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	uint32_t previous_data_reading;
	sys_slist_t callbacks;
	uint32_t rising_edge_interrupts;
	uint32_t falling_edge_interrupts;
	/* Workaround to handle channel 2 interrupts from channel 1*/
	const struct device *other_channel_device;
	#endif
	};

	static inline uint32_t gpio_xlnx_axi_read_data(const struct device *dev)
	{
	const struct gpio_xlnx_axi_config *config = dev->config;

	return sys_read32(config->base + (config->channel * GPIO2_OFFSET) + GPIO_DATA_OFFSET);
	}

	static inline void gpio_xlnx_axi_write_data(const struct device *dev, uint32_t val)
	{
	const struct gpio_xlnx_axi_config *config = dev->config;

	sys_write32(val, config->base + (config->channel * GPIO2_OFFSET) + GPIO_DATA_OFFSET);
	}

	static inline void gpio_xlnx_axi_write_tri(const struct device *dev, uint32_t val)
	{
	const struct gpio_xlnx_axi_config *config = dev->config;

	sys_write32(val, config->base + (config->channel * GPIO2_OFFSET) + GPIO_TRI_OFFSET);
	}

	static int gpio_xlnx_axi_pin_configure(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
	{
	const struct gpio_xlnx_axi_config *config = dev->config;
	struct gpio_xlnx_axi_data *data = dev->data;
	unsigned int key;

	if (!(BIT(pin) & config->common.port_pin_mask)) {
	return -EINVAL;
	}

	if (((flags & GPIO_INPUT) != 0) && ((flags & GPIO_OUTPUT) != 0)) {
	return -ENOTSUP;
	}

	if ((flags & GPIO_SINGLE_ENDED) != 0) {
	return -ENOTSUP;
	}

	if ((flags & (GPIO_PULL_UP \| GPIO_PULL_DOWN)) != 0) {
	return -ENOTSUP;
	}

	if (((flags & GPIO_INPUT) != 0) && config->all_outputs) {
	return -ENOTSUP;
	}

	if (((flags & GPIO_OUTPUT) != 0) && config->all_inputs) {
	return -ENOTSUP;
	}

	key = irq_lock();

	switch (flags & GPIO_DIR_MASK) {
	case GPIO_INPUT:
	data->tri \|= BIT(pin);
	break;
	case GPIO_OUTPUT:
	if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0) {
	data->dout \|= BIT(pin);
	} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0) {
	data->dout &= ~BIT(pin);
	}
	data->tri &= ~BIT(pin);
	break;
	default:
	return -ENOTSUP;
	}

	gpio_xlnx_axi_write_data(dev, data->dout);
	gpio_xlnx_axi_write_tri(dev, data->tri);

	irq_unlock(key);

	return 0;
	}

	static int gpio_xlnx_axi_port_get_raw(const struct device dev, gpio_port_value_t value)
	{
	*value = gpio_xlnx_axi_read_data(dev);
	return 0;
	}

	static int gpio_xlnx_axi_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
	gpio_port_value_t value)
	{
	struct gpio_xlnx_axi_data *data = dev->data;
	unsigned int key;

	key = irq_lock();
	data->dout = (data->dout & ~mask) \| (mask & value);
	gpio_xlnx_axi_write_data(dev, data->dout);
	irq_unlock(key);

	return 0;
	}

	static int gpio_xlnx_axi_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins)
	{
	struct gpio_xlnx_axi_data *data = dev->data;
	unsigned int key;

	key = irq_lock();
	data->dout \|= pins;
	gpio_xlnx_axi_write_data(dev, data->dout);
	irq_unlock(key);

	return 0;
	}

	static int gpio_xlnx_axi_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins)
	{
	struct gpio_xlnx_axi_data *data = dev->data;
	unsigned int key;

	key = irq_lock();
	data->dout &= ~pins;
	gpio_xlnx_axi_write_data(dev, data->dout);
	irq_unlock(key);

	return 0;
	}

	static int gpio_xlnx_axi_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins)
	{
	struct gpio_xlnx_axi_data *data = dev->data;
	unsigned int key;

	key = irq_lock();
	data->dout ^= pins;
	gpio_xlnx_axi_write_data(dev, data->dout);
	irq_unlock(key);

	return 0;
	}

	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	/**
	* Enables interrupts for the given pins on the channel
	* The axi gpio can only enable interrupts for an entire port, so we need to track
	* the pins and modes ourselves.
	*/
	static int gpio_xlnx_axi_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
	enum gpio_int_mode mode, enum gpio_int_trig trig)
	{
	const struct gpio_xlnx_axi_config *config = dev->config;
	struct gpio_xlnx_axi_data *data = dev->data;
	const uint32_t pin_mask = BIT(pin);
	const uint32_t chan_mask = BIT(config->channel);
	unsigned int key;
	uint32_t enabled_interrupts;

	if (!config->interrupts_available) {
	return -ENOTSUP;
	}

	if ((mode & GPIO_INT_ENABLE) && !(mode & GPIO_INT_EDGE)) {
	/* only edge detection is supported */
	return -ENOTSUP;
	}

	key = irq_lock();

	data->rising_edge_interrupts &= ~pin_mask;
	data->falling_edge_interrupts &= ~pin_mask;

	if (mode & GPIO_INT_ENABLE) {
	if (trig & GPIO_INT_HIGH_1) {
	data->rising_edge_interrupts \|= pin_mask;
	}
	if (trig & GPIO_INT_LOW_0) {
	data->falling_edge_interrupts \|= pin_mask;
	}
	}

	/* if there's at least one pin interrupt enabled on the channel, enable the interrupts
	* for that entire channel without changing the other channel
	*/
	enabled_interrupts = sys_read32(config->base + IPIER_OFFSET);
	if (data->rising_edge_interrupts \|\| data->falling_edge_interrupts) {
	if (!(enabled_interrupts & chan_mask)) {
	/* Clear any pending interrupts and update last state before enabling
	* interrupt
	*/
	if (sys_read32(config->base + IPISR_OFFSET) & chan_mask) {
	sys_write32(chan_mask, config->base + IPISR_OFFSET);
	}
	data->previous_data_reading = gpio_xlnx_axi_read_data(dev);

	enabled_interrupts \|= chan_mask;
	}
	} else {
	enabled_interrupts &= ~chan_mask;
	}
	sys_write32(enabled_interrupts, config->base + IPIER_OFFSET);

	irq_unlock(key);
	return 0;
	}
	#endif

	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	static int gpio_xlnx_axi_manage_callback(const struct device dev, struct gpio_callback callback,
	bool set)
	{
	struct gpio_xlnx_axi_data *data = dev->data;

	return gpio_manage_callback(&data->callbacks, callback, set);
	}
	#endif

	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	/**
	* Returns the pins on this devices channel which changed and also have an interrupt enabled on that
	* pin. Also clears the pending interrupt for that channel.
	*/
	static uint32_t gpio_xlnx_axi_get_pending_int(const struct device *dev)
	{
	const struct gpio_xlnx_axi_config *config = dev->config;
	struct gpio_xlnx_axi_data *data = dev->data;
	const uint32_t chan_mask = BIT(config->channel);
	unsigned int key;
	uint32_t interrupt_flags;
	uint32_t current_data;
	uint32_t changed_pins;
	uint32_t changed_and_rising_edge;
	uint32_t changed_and_falling_edge;
	uint32_t interrupts;

	key = irq_lock();

	/* make sure interrupt was for this channel */
	interrupt_flags = sys_read32(config->base + IPISR_OFFSET);

	if (!(interrupt_flags & chan_mask)) {
	irq_unlock(key);
	return 0;
	}

	/* clear pending interrupt for the whole channel */
	sys_write32(chan_mask, config->base + IPISR_OFFSET);

	/* find which pins changed and also have an interrupt enabled */
	current_data = gpio_xlnx_axi_read_data(dev);
	changed_pins = current_data ^ data->previous_data_reading;
	data->previous_data_reading = current_data;
	changed_and_rising_edge = (changed_pins & current_data);
	changed_and_falling_edge = (changed_pins & ~current_data);
	interrupts = (changed_and_rising_edge & data->rising_edge_interrupts) \|
	(changed_and_falling_edge & data->falling_edge_interrupts);

	irq_unlock(key);
	return interrupts;
	}
	#endif

	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	static void gpio_xlnx_axi_isr(const struct device *dev)
	{
	struct gpio_xlnx_axi_data *data = dev->data;

	gpio_fire_callbacks(&data->callbacks, dev, gpio_xlnx_axi_get_pending_int(dev));

	/* Since both channels use the same interrupt, only the first channel registers the ISR.
	* If the second channel is also enabled, then check for any events on it as well.
	*/
	if (data->other_channel_device) {
	struct gpio_xlnx_axi_data *other_data = data->other_channel_device->data;

	gpio_fire_callbacks(&other_data->callbacks, data->other_channel_device,
	gpio_xlnx_axi_get_pending_int(data->other_channel_device));
	}
	}
	#endif

	static int gpio_xlnx_axi_init(const struct device *dev)
	{
	struct gpio_xlnx_axi_data *data = dev->data;

	gpio_xlnx_axi_write_data(dev, data->dout);
	gpio_xlnx_axi_write_tri(dev, data->tri);

	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	const struct gpio_xlnx_axi_config *config = dev->config;

	if (config->irq_config_func != NULL) {
	/* Note: This is only called for the first channel, even if the second is enabled.
	* Need to perform the setup for both channels.
	* Disable all interrupts.
	*/
	sys_write32(0x0, config->base + IPIER_OFFSET);

	/* Clear all pending interrupts */
	sys_write32(sys_read32(config->base + IPISR_OFFSET), config->base + IPISR_OFFSET);

	/* Enable global interrupts for this gpio device */
	sys_write32(GIER_GIE, config->base + GIER_OFFSET);

	config->irq_config_func(dev);
	}
	#endif
	return 0;
	}

	static DEVICE_API(gpio, gpio_xlnx_axi_driver_api) = {
	.pin_configure = gpio_xlnx_axi_pin_configure,
	.port_get_raw = gpio_xlnx_axi_port_get_raw,
	.port_set_masked_raw = gpio_xlnx_axi_port_set_masked_raw,
	.port_set_bits_raw = gpio_xlnx_axi_port_set_bits_raw,
	.port_clear_bits_raw = gpio_xlnx_axi_port_clear_bits_raw,
	.port_toggle_bits = gpio_xlnx_axi_port_toggle_bits,
	#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(interrupts)
	.pin_interrupt_configure = gpio_xlnx_axi_pin_interrupt_configure,
	.manage_callback = gpio_xlnx_axi_manage_callback,
	.get_pending_int = gpio_xlnx_axi_get_pending_int,
	#endif
	};

	#define GPIO_XLNX_AXI_GPIO2_HAS_COMPAT_STATUS_OKAY(n) \
	UTIL_AND(DT_NODE_HAS_COMPAT(DT_INST_CHILD(n, gpio2), xlnx_xps_gpio_1_00_a_gpio2), \
	DT_NODE_HAS_STATUS_OKAY(DT_INST_CHILD(n, gpio2)))

	#define GPIO_XLNX_AXI_GPIO2_COND_INIT(n) \
	IF_ENABLED(UTIL_AND(DT_INST_PROP_OR(n, xlnx_is_dual, 1), \
	GPIO_XLNX_AXI_GPIO2_HAS_COMPAT_STATUS_OKAY(n)), \
	(GPIO_XLNX_AXI_GPIO2_INIT(n)));

	#define GPIO_XLNX_AXI_GPIO2_INIT(n) \
	static struct gpio_xlnx_axi_data gpio_xlnx_axi_##n##_2_data = { \
	.dout = DT_INST_PROP_OR(n, xlnx_dout_default_2, 0), \
	.tri = DT_INST_PROP_OR(n, xlnx_tri_default_2, GENMASK(MAX_GPIOS - 1, 0)), \
	}; \
	\
	static const struct gpio_xlnx_axi_config gpio_xlnx_axi_##n##_2_config = { \
	.common = \
	{ \
	.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_NGPIOS( \
	DT_INST_PROP_OR(n, xlnx_gpio2_width, MAX_GPIOS)), \
	}, \
	.base = DT_INST_REG_ADDR(n), \
	.channel = 1, \
	.all_inputs = DT_INST_PROP_OR(n, xlnx_all_inputs_2, 0), \
	.all_outputs = DT_INST_PROP_OR(n, xlnx_all_outputs_2, 0), \
	.interrupts_available = DT_INST_NODE_HAS_PROP(n, interrupts)}; \
	\
	DEVICE_DT_DEFINE(DT_INST_CHILD(n, gpio2), &gpio_xlnx_axi_init, NULL, \
	&gpio_xlnx_axi_##n##_2_data, &gpio_xlnx_axi_##n##_2_config, PRE_KERNEL_1, \
	CONFIG_GPIO_INIT_PRIORITY, &gpio_xlnx_axi_driver_api);

	#define GPIO_XLNX_AXI_INIT(n) \
	IF_ENABLED(DT_INST_NODE_HAS_PROP(n, interrupts), \
	(static void gpio_xlnx_axi_##n##_irq_config(const struct device *dev);)) \
	\
	GPIO_XLNX_AXI_GPIO2_COND_INIT(n); \
	\
	static struct gpio_xlnx_axi_data gpio_xlnx_axi_##n##_data = { \
	.dout = DT_INST_PROP_OR(n, xlnx_dout_default, 0), \
	.tri = DT_INST_PROP_OR(n, xlnx_tri_default, GENMASK(MAX_GPIOS - 1, 0)), \
	IF_ENABLED(UTIL_AND(UTIL_AND(DT_INST_NODE_HAS_PROP(n, interrupts), \
	DT_INST_PROP_OR(n, xlnx_is_dual, 1)), \
	GPIO_XLNX_AXI_GPIO2_HAS_COMPAT_STATUS_OKAY(n)), \
	(.other_channel_device = DEVICE_DT_GET(DT_INST_CHILD(n, gpio2))))}; \
	\
	static const struct gpio_xlnx_axi_config gpio_xlnx_axi_##n##_config = { \
	.common = \
	{ \
	.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_NGPIOS( \
	DT_INST_PROP_OR(n, xlnx_gpio_width, MAX_GPIOS)), \
	}, \
	.base = DT_INST_REG_ADDR(n), \
	.channel = 0, \
	.all_inputs = DT_INST_PROP_OR(n, xlnx_all_inputs, 0), \
	.all_outputs = DT_INST_PROP_OR(n, xlnx_all_outputs, 0), \
	.interrupts_available = DT_INST_NODE_HAS_PROP(n, interrupts), \
	IF_ENABLED(DT_INST_NODE_HAS_PROP(n, interrupts), \
	(.irq_config_func = gpio_xlnx_axi_##n##_irq_config))}; \
	\
	IF_ENABLED(DT_INST_NODE_HAS_PROP(n, interrupts), \
	(static void gpio_xlnx_axi_##n##_irq_config(const struct device *dev) \
	{ \
	ARG_UNUSED(dev); \
	\
	IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), \
	gpio_xlnx_axi_isr, DEVICE_DT_INST_GET(n), 0); \
	\
	irq_enable(DT_INST_IRQN(n)); \
	})) \
	\
	DEVICE_DT_INST_DEFINE(n, gpio_xlnx_axi_init, NULL, &gpio_xlnx_axi_##n##_data, \
	&gpio_xlnx_axi_##n##_config, PRE_KERNEL_1, \
	CONFIG_GPIO_INIT_PRIORITY, &gpio_xlnx_axi_driver_api);

	DT_INST_FOREACH_STATUS_OKAY(GPIO_XLNX_AXI_INIT)