| /* |
| * Copyright (c) 2017, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <nxp/nxp_lpc54xxx_m4.dtsi> |
| #include "lpcxpresso54114.dtsi" |
| #include <zephyr/dt-bindings/input/input-event-codes.h> |
| |
| / { |
| model = "NXP LPCXpresso54114 board"; |
| compatible = "nxp,lpc54xxx", "nxp,lpc"; |
| |
| aliases{ |
| sw0 = &user_button_1; |
| sw1 = &user_button_2; |
| sw2 = &user_button_3; |
| }; |
| |
| chosen { |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,console = &flexcomm0; |
| zephyr,shell-uart = &flexcomm0; |
| zephyr,code-partition = &slot0_partition; |
| zephyr,uart-mcumgr = &flexcomm0; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| user_button_1: button_0 { |
| label = "User SW1"; |
| gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| zephyr,code = <INPUT_KEY_0>; |
| }; |
| user_button_2: button_1 { |
| label = "User SW2"; |
| gpios = <&gpio0 31 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| zephyr,code = <INPUT_KEY_1>; |
| }; |
| user_button_3: button_2 { |
| label = "User SW3"; |
| gpios = <&gpio0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| zephyr,code = <INPUT_KEY_2>; |
| }; |
| }; |
| }; |
| |
| /* |
| * Default for this board is to allocate SRAM0-1 to M4 CPU but the |
| * application can have an application specific device tree to |
| * allocate the SRAM0-3 differently. |
| * |
| */ |
| &sram0 { |
| compatible = "mmio-sram"; |
| reg = <0x20000000 DT_SIZE_K(128)>; |
| }; |
| |
| &cpu0 { |
| clock-frequency = <48000000>; |
| }; |
| |
| &mailbox0 { |
| status = "okay"; |
| }; |
| |
| &red_led { |
| status = "okay"; |
| }; |
| |
| &green_led { |
| status = "okay"; |
| }; |
| |
| &blue_led { |
| status = "okay"; |
| }; |
| |
| &flexcomm0 { |
| status = "okay"; |
| }; |
| |
| &flexcomm4 { |
| status = "okay"; |
| }; |
| |
| &flexcomm5 { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| /* |
| * LPC flash controller requires minimum 256 byte write to flash, |
| * so MCUBoot is not supported. Just provide storage and code partition. |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| slot0_partition: partition@0 { |
| label = "image-0"; |
| reg = <0x00000000 DT_SIZE_K(196)>; |
| }; |
| storage_partition: partition@30000 { |
| label = "storage"; |
| reg = <0x00030000 DT_SIZE_K(64)>; |
| }; |
| }; |
| }; |