| .. _rk043fn66hs_ctg: |
| |
| NXP RK043FN66HS-CTG Parallel Display |
| #################################### |
| |
| Overview |
| ******** |
| |
| RK043FN66HS-CTG is a 4.3 inch TFT 480*272 pixels with LED backlight and |
| capacitive touch panel from Rocktech. This LCD panel can work with several i.MX |
| RT EVKs and LPC MCUs for evaluation of applications with display. |
| |
| More information about the shield can be found at the `RK043FN66HS-CTG product |
| page`_. |
| |
| This display uses a 40 pin parallel FPC interface plus 6 pin I2C interface, |
| available on many NXP EVKs. Note that this parallel FPC interface is not |
| compatible with the MIPI FPC interface present on other NXP EVKs. |
| |
| Pins Assignment of the Rocktech RK043FN66HS-CTG Parallel Display |
| ================================================================ |
| |
| +-----------------------+------------------------+ |
| | Parallel FPC Pin | Function | |
| +=======================+========================+ |
| | 1 | LED backlight cathode | |
| +-----------------------+------------------------+ |
| | 2 | LED backlight anode | |
| +-----------------------+------------------------+ |
| | 3 | GND | |
| +-----------------------+------------------------+ |
| | 4 | VDD (3v3) | |
| +-----------------------+------------------------+ |
| | 5-7 | GND | |
| +-----------------------+------------------------+ |
| | 8-12 | LCD D11-D15 | |
| +-----------------------+------------------------+ |
| | 13-14 | GND | |
| +-----------------------+------------------------+ |
| | 15-20 | LCD D5-D10 | |
| +-----------------------+------------------------+ |
| | 21-23 | GND | |
| +-----------------------+------------------------+ |
| | 24-28 | LCD D0-D4 | |
| +-----------------------+------------------------+ |
| | 29 | GND | |
| +-----------------------+------------------------+ |
| | 30 | LCD CLK | |
| +-----------------------+------------------------+ |
| | 31 | LCD DISP | |
| +-----------------------+------------------------+ |
| | 32 | LCD HSYNC | |
| +-----------------------+------------------------+ |
| | 33 | LCD VSYNC | |
| +-----------------------+------------------------+ |
| | 34 | LCD DE | |
| +-----------------------+------------------------+ |
| | 35 | NC | |
| +-----------------------+------------------------+ |
| | 36 | GND | |
| +-----------------------+------------------------+ |
| | 37-40 | NC | |
| +-----------------------+------------------------+ |
| |
| +-----------------------+------------------------+ |
| | I2C Connector Pin | Function | |
| +=======================+========================+ |
| | 1 | VDD (3v3) | |
| +-----------------------+------------------------+ |
| | 2 | LCD Touch Reset | |
| +-----------------------+------------------------+ |
| | 3 | LCD Touch Interrupt | |
| +-----------------------+------------------------+ |
| | 4 | LCD I2C SCL | |
| +-----------------------+------------------------+ |
| | 5 | LCD I2C SDA | |
| +-----------------------+------------------------+ |
| | 6 | GND | |
| +-----------------------+------------------------+ |
| |
| Requirements |
| ************ |
| |
| This shield can only be used with a board which provides a configuration |
| for the 40+6 pin parallel/I2C FPC interface |
| |
| Programming |
| *********** |
| |
| Set ``--shield rk043fn66hs_ctg`` when you invoke ``west build``. For |
| example: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/drivers/display |
| :board: mimxrt1060_evk |
| :shield: rk043fn66hs_ctg |
| :goals: build |
| |
| References |
| ********** |
| |
| .. target-notes:: |
| |
| .. _RK043FN66HS-CTG product page: |
| https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/4-3-lcd-panel:RK043FN66HS-CTG |
