blob: b6be011d61b73a0c16efee6a65da4ec32ea3f100 [file] [log] [blame]
/*
* Copyright (c) 2019-2023 Henrik Brix Andersen <henrik@brixandersen.dk>
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nxp_pcf8523
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/i2c.h>
#include <zephyr/drivers/rtc.h>
#include <zephyr/logging/log.h>
#include <zephyr/pm/device.h>
#include <zephyr/sys/util.h>
LOG_MODULE_REGISTER(pcf8523, CONFIG_RTC_LOG_LEVEL);
/* PCF8523 register addresses */
#define PCF8523_CONTROL_1 0x00U
#define PCF8523_CONTROL_2 0x01U
#define PCF8523_CONTROL_3 0x02U
#define PCF8523_SECONDS 0x03U
#define PCF8523_MINUTES 0x04U
#define PCF8523_HOURS 0x05U
#define PCF8523_DAYS 0x06U
#define PCF8523_WEEKDAYS 0x07U
#define PCF8523_MONTHS 0x08U
#define PCF8523_YEARS 0x09U
#define PCF8523_MINUTE_ALARM 0x0aU
#define PCF8523_HOUR_ALARM 0x0bU
#define PCF8523_DAY_ALARM 0x0cU
#define PCF8523_WEEKDAY_ALARM 0x0dU
#define PCF8523_OFFSET 0x0eU
#define PCF8523_TMR_CLKOUT_CTRL 0x0fU
#define PCF8523_TMR_A_FREQ_CTRL 0x10U
#define PCF8523_TMR_A_REG 0x11U
#define PCF8523_TMR_B_FREQ_CTRL 0x12U
#define PCF8523_TMR_B_REG 0x13U
/* Control register bits */
#define PCF8523_CONTROL_1_CAP_SEL BIT(7)
#define PCF8523_CONTROL_1_T BIT(6)
#define PCF8523_CONTROL_1_STOP BIT(5)
#define PCF8523_CONTROL_1_SR BIT(4)
#define PCF8523_CONTROL_1_12_24 BIT(3)
#define PCF8523_CONTROL_1_SIE BIT(2)
#define PCF8523_CONTROL_1_AIE BIT(1)
#define PCF8523_CONTROL_1_CIE BIT(0)
#define PCF8523_CONTROL_2_WTAF BIT(7)
#define PCF8523_CONTROL_2_CTAF BIT(6)
#define PCF8523_CONTROL_2_CTBF BIT(5)
#define PCF8523_CONTROL_2_SF BIT(4)
#define PCF8523_CONTROL_2_AF BIT(3)
#define PCF8523_CONTROL_2_WTAIE BIT(2)
#define PCF8523_CONTROL_2_CTAIE BIT(1)
#define PCF8523_CONTROL_2_CTBIE BIT(0)
#define PCF8523_CONTROL_3_PM_MASK GENMASK(7, 5)
#define PCF8523_CONTROL_3_BSF BIT(3)
#define PCF8523_CONTROL_3_BLF BIT(2)
#define PCF8523_CONTROL_3_BSIE BIT(1)
#define PCF8523_CONTROL_3_BLIE BIT(0)
/* Time and date register bits */
#define PCF8523_SECONDS_OS BIT(7)
#define PCF8523_SECONDS_MASK GENMASK(6, 0)
#define PCF8523_MINUTES_MASK GENMASK(6, 0)
#define PCF8523_HOURS_AMPM BIT(5)
#define PCF8523_HOURS_12H_MASK GENMASK(4, 0)
#define PCF8523_HOURS_24H_MASK GENMASK(5, 0)
#define PCF8523_DAYS_MASK GENMASK(5, 0)
#define PCF8523_WEEKDAYS_MASK GENMASK(2, 0)
#define PCF8523_MONTHS_MASK GENMASK(4, 0)
#define PCF8523_YEARS_MASK GENMASK(7, 0)
/* Alarm register bits */
#define PCF8523_MINUTE_ALARM_AEN_M BIT(7)
#define PCF8523_MINUTE_ALARM_MASK GENMASK(6, 0)
#define PCF8523_HOUR_ALARM_AEN_H BIT(7)
#define PCF8523_HOUR_ALARM_AMPM BIT(5)
#define PCF8523_HOUR_ALARM_12H_MASK GENMASK(4, 0)
#define PCF8523_HOUR_ALARM_24H_MASK GENMASK(5, 0)
#define PCF8523_DAY_ALARM_AEN_D BIT(7)
#define PCF8523_DAY_ALARM_MASK GENMASK(5, 0)
#define PCF8523_WEEKDAY_ALARM_AEN_W BIT(7)
#define PCF8523_WEEKDAY_ALARM_MASK GENMASK(5, 0)
/* Timer register bits */
#define PCF8523_TMR_CLKOUT_CTRL_TAM BIT(7)
#define PCF8523_TMR_CLKOUT_CTRL_TBM BIT(6)
#define PCF8523_TMR_CLKOUT_CTRL_COF_MASK GENMASK(5, 3)
#define PCF8523_TMR_CLKOUT_CTRL_TAC_MASK GENMASK(2, 1)
#define PCF8523_TMR_CLKOUT_CTRL_TBC BIT(0)
#define PCF8523_TMR_A_FREQ_CTRL_TAQ_MASK GENMASK(2, 0)
#define PCF8523_TMR_A_REG_T_A_MASK GENMASK(7, 0)
#define PCF8523_TMR_B_FREQ_CTRL_TBW_MASK GENMASK(6, 4)
#define PCF8523_TMR_B_FREQ_CTRL_TBQ_MASK GENMASK(2, 0)
#define PCF8523_TMR_B_REG_T_B_MASK GENMASK(7, 0)
/* Offset register bits */
#define PCF8523_OFFSET_MODE BIT(7)
#define PCF8523_OFFSET_MASK GENMASK(6, 0)
/* RTC alarm time fields supported by the PCF8523 */
#define PCF8523_RTC_ALARM_TIME_MASK \
(RTC_ALARM_TIME_MASK_MINUTE | RTC_ALARM_TIME_MASK_HOUR | RTC_ALARM_TIME_MASK_MONTHDAY | \
RTC_ALARM_TIME_MASK_WEEKDAY)
/* The PCF8523 only supports two-digit years, calculate offset to use */
#define PCF8523_YEARS_OFFSET (2000 - 1900)
/* The PCF8523 enumerates months 1 to 12, RTC API uses 0 to 11 */
#define PCF8523_MONTHS_OFFSET 1
/* Helper macro to guard int1-gpios related code */
#if DT_ANY_INST_HAS_PROP_STATUS_OKAY(int1_gpios) && \
(defined(CONFIG_RTC_ALARM) || defined(CONFIG_RTC_UPDATE))
#define PCF8523_INT1_GPIOS_IN_USE 1
#endif
struct pcf8523_config {
const struct i2c_dt_spec i2c;
#ifdef PCF8523_INT1_GPIOS_IN_USE
struct gpio_dt_spec int1;
#endif /* PCF8523_INT1_GPIOS_IN_USE */
uint8_t cof;
uint8_t pm;
bool cap_sel;
bool wakeup_source;
};
struct pcf8523_data {
struct k_mutex lock;
#if PCF8523_INT1_GPIOS_IN_USE
struct gpio_callback int1_callback;
struct k_thread int1_thread;
struct k_sem int1_sem;
K_KERNEL_STACK_MEMBER(int1_stack, CONFIG_RTC_PCF8523_THREAD_STACK_SIZE);
#ifdef CONFIG_RTC_ALARM
rtc_alarm_callback alarm_callback;
void *alarm_user_data;
#endif /* CONFIG_RTC_ALARM */
#ifdef CONFIG_RTC_UPDATE
rtc_update_callback update_callback;
void *update_user_data;
#endif /* CONFIG_RTC_UPDATE */
#endif /* PCF8523_INT1_GPIOS_IN_USE */
};
static int pcf8523_read_regs(const struct device *dev, uint8_t addr, void *buf, size_t len)
{
const struct pcf8523_config *config = dev->config;
int err;
err = i2c_write_read_dt(&config->i2c, &addr, sizeof(addr), buf, len);
if (err != 0) {
LOG_ERR("failed to read reg addr 0x%02x, len %d (err %d)", addr, len, err);
return err;
}
return 0;
}
static int pcf8523_read_reg8(const struct device *dev, uint8_t addr, uint8_t *val)
{
return pcf8523_read_regs(dev, addr, val, sizeof(*val));
}
static int pcf8523_write_regs(const struct device *dev, uint8_t addr, void *buf, size_t len)
{
const struct pcf8523_config *config = dev->config;
uint8_t block[sizeof(addr) + len];
int err;
block[0] = addr;
memcpy(&block[1], buf, len);
err = i2c_write_dt(&config->i2c, block, sizeof(block));
if (err != 0) {
LOG_ERR("failed to write reg addr 0x%02x, len %d (err %d)", addr, len, err);
return err;
}
return 0;
}
static int pcf8523_write_reg8(const struct device *dev, uint8_t addr, uint8_t val)
{
return pcf8523_write_regs(dev, addr, &val, sizeof(val));
}
static int pcf8523_write_stop_bit_unlocked(const struct device *dev, bool value)
{
uint8_t control_1;
int err;
err = pcf8523_read_reg8(dev, PCF8523_CONTROL_1, &control_1);
if (err != 0) {
return err;
}
if (value) {
control_1 |= PCF8523_CONTROL_1_STOP;
} else {
control_1 &= ~(PCF8523_CONTROL_1_STOP);
}
err = pcf8523_write_reg8(dev, PCF8523_CONTROL_1, control_1);
if (err != 0) {
return err;
}
return 0;
}
#if PCF8523_INT1_GPIOS_IN_USE
static int pcf8523_int1_enable_unlocked(const struct device *dev, bool enable)
{
const struct pcf8523_config *config = dev->config;
uint8_t tmr_clkout_ctrl;
int err;
if (!config->wakeup_source) {
/* Only change COF if not configured as wakeup-source */
err = pcf8523_read_reg8(dev, PCF8523_TMR_CLKOUT_CTRL, &tmr_clkout_ctrl);
if (err != 0) {
return err;
}
if (enable) {
/* Disable CLKOUT */
tmr_clkout_ctrl |= PCF8523_TMR_CLKOUT_CTRL_COF_MASK;
} else if (!config->wakeup_source) {
/* Enable CLKOUT */
tmr_clkout_ctrl &= ~(PCF8523_TMR_CLKOUT_CTRL_COF_MASK);
tmr_clkout_ctrl |=
FIELD_PREP(PCF8523_TMR_CLKOUT_CTRL_COF_MASK, config->cof);
}
err = pcf8523_write_reg8(dev, PCF8523_TMR_CLKOUT_CTRL, tmr_clkout_ctrl);
if (err != 0) {
return err;
}
}
/* Use edge interrupts to avoid multiple GPIO IRQs while servicing the IRQ in the thread */
err = gpio_pin_interrupt_configure_dt(&config->int1,
enable ? GPIO_INT_EDGE_TO_ACTIVE : GPIO_INT_DISABLE);
if (err != 0) {
LOG_ERR("failed to %s GPIO IRQ (err %d)", enable ? "enable" : "disable", err);
return err;
}
return 0;
}
static void pcf8523_int1_thread(void *p1, void *p2, void *p3)
{
ARG_UNUSED(p2);
ARG_UNUSED(p3);
const struct device *dev = p1;
struct pcf8523_data *data = dev->data;
rtc_alarm_callback alarm_callback = NULL;
void *alarm_user_data = NULL;
rtc_update_callback update_callback = NULL;
void *update_user_data = NULL;
uint8_t control_2;
int err;
while (true) {
k_sem_take(&data->int1_sem, K_FOREVER);
k_mutex_lock(&data->lock, K_FOREVER);
err = pcf8523_read_reg8(dev, PCF8523_CONTROL_2, &control_2);
if (err != 0) {
goto unlock;
}
#ifdef CONFIG_RTC_ALARM
if ((control_2 & PCF8523_CONTROL_2_AF) != 0 && data->alarm_callback != NULL) {
control_2 &= ~(PCF8523_CONTROL_2_AF);
alarm_callback = data->alarm_callback;
alarm_user_data = data->alarm_user_data;
}
#endif /* CONFIG_RTC_ALARM */
#ifdef CONFIG_RTC_UPDATE
if ((control_2 & PCF8523_CONTROL_2_SF) != 0) {
control_2 &= ~(PCF8523_CONTROL_2_SF);
update_callback = data->update_callback;
update_user_data = data->update_user_data;
}
#endif /* CONFIG_RTC_UPDATE */
control_2 |= PCF8523_CONTROL_2_CTAF | PCF8523_CONTROL_2_CTBF;
err = pcf8523_write_reg8(dev, PCF8523_CONTROL_2, control_2);
if (err != 0) {
goto unlock;
}
/* Check if interrupt occurred between CONTROL_2 read/write */
err = pcf8523_read_reg8(dev, PCF8523_CONTROL_2, &control_2);
if (err != 0) {
goto unlock;
}
if (((control_2 & PCF8523_CONTROL_2_AF) != 0U && alarm_callback != NULL) ||
((control_2 & PCF8523_CONTROL_2_SF) != 0U)) {
/*
* Another interrupt occurred while servicing this one, process current
* callback(s) and yield.
*/
k_sem_give(&data->int1_sem);
}
unlock:
k_mutex_unlock(&data->lock);
if (alarm_callback != NULL) {
alarm_callback(dev, 0U, alarm_user_data);
alarm_callback = NULL;
}
if (update_callback != NULL) {
update_callback(dev, update_user_data);
update_callback = NULL;
}
}
}
static void pcf8523_int1_callback_handler(const struct device *port, struct gpio_callback *cb,
gpio_port_pins_t pins)
{
struct pcf8523_data *data = CONTAINER_OF(cb, struct pcf8523_data, int1_callback);
ARG_UNUSED(port);
ARG_UNUSED(pins);
k_sem_give(&data->int1_sem);
}
#endif /* PCF8523_INT1_GPIOS_IN_USE */
static int pcf8523_set_time(const struct device *dev, const struct rtc_time *timeptr)
{
struct pcf8523_data *data = dev->data;
uint8_t regs[7];
int err;
if (timeptr->tm_year < PCF8523_YEARS_OFFSET ||
timeptr->tm_year > PCF8523_YEARS_OFFSET + 99) {
return -EINVAL;
}
k_mutex_lock(&data->lock, K_FOREVER);
/* Freeze the time circuits */
err = pcf8523_write_stop_bit_unlocked(dev, true);
if (err != 0) {
goto unlock;
}
LOG_DBG("set time: year = %d, mon = %d, mday = %d, wday = %d, hour = %d, "
"min = %d, sec = %d",
timeptr->tm_year, timeptr->tm_mon, timeptr->tm_mday, timeptr->tm_wday,
timeptr->tm_hour, timeptr->tm_min, timeptr->tm_sec);
regs[0] = bin2bcd(timeptr->tm_sec) & PCF8523_SECONDS_MASK;
regs[1] = bin2bcd(timeptr->tm_min) & PCF8523_MINUTES_MASK;
regs[2] = bin2bcd(timeptr->tm_hour) & PCF8523_HOURS_24H_MASK;
regs[3] = bin2bcd(timeptr->tm_mday) & PCF8523_DAYS_MASK;
regs[4] = bin2bcd(timeptr->tm_wday) & PCF8523_WEEKDAYS_MASK;
regs[5] = bin2bcd(timeptr->tm_mon + PCF8523_MONTHS_OFFSET) & PCF8523_MONTHS_MASK;
regs[6] = bin2bcd(timeptr->tm_year - PCF8523_YEARS_OFFSET) & PCF8523_YEARS_MASK;
/* Write registers PCF8523_SECONDS through PCF8523_YEARS */
err = pcf8523_write_regs(dev, PCF8523_SECONDS, &regs, sizeof(regs));
if (err != 0) {
goto unlock;
}
/* Unfreeze time circuits */
err = pcf8523_write_stop_bit_unlocked(dev, false);
if (err != 0) {
goto unlock;
}
unlock:
k_mutex_unlock(&data->lock);
return err;
}
static int pcf8523_get_time(const struct device *dev, struct rtc_time *timeptr)
{
uint8_t regs[10];
int err;
/* Read registers PCF8523_CONTROL_1 through PCF8523_YEARS */
err = pcf8523_read_regs(dev, PCF8523_CONTROL_1, &regs, sizeof(regs));
if (err != 0) {
return err;
}
if ((regs[0] & PCF8523_CONTROL_1_STOP) != 0) {
LOG_WRN("time circuits frozen");
return -ENODATA;
}
if ((regs[3] & PCF8523_SECONDS_OS) != 0) {
LOG_WRN("oscillator stopped or interrupted");
return -ENODATA;
}
memset(timeptr, 0U, sizeof(*timeptr));
timeptr->tm_sec = bcd2bin(regs[3] & PCF8523_SECONDS_MASK);
timeptr->tm_min = bcd2bin(regs[4] & PCF8523_MINUTES_MASK);
timeptr->tm_hour = bcd2bin(regs[5] & PCF8523_HOURS_24H_MASK);
timeptr->tm_mday = bcd2bin(regs[6] & PCF8523_DAYS_MASK);
timeptr->tm_wday = bcd2bin(regs[7] & PCF8523_WEEKDAYS_MASK);
timeptr->tm_mon = bcd2bin(regs[8] & PCF8523_MONTHS_MASK) - PCF8523_MONTHS_OFFSET;
timeptr->tm_year = bcd2bin(regs[9] & PCF8523_YEARS_MASK) + PCF8523_YEARS_OFFSET;
timeptr->tm_yday = -1;
timeptr->tm_isdst = -1;
LOG_DBG("get time: year = %d, mon = %d, mday = %d, wday = %d, hour = %d, "
"min = %d, sec = %d",
timeptr->tm_year, timeptr->tm_mon, timeptr->tm_mday, timeptr->tm_wday,
timeptr->tm_hour, timeptr->tm_min, timeptr->tm_sec);
return 0;
}
#ifdef CONFIG_RTC_ALARM
static int pcf8523_alarm_get_supported_fields(const struct device *dev, uint16_t id, uint16_t *mask)
{
ARG_UNUSED(dev);
if (id != 0U) {
LOG_ERR("invalid ID %d", id);
return -EINVAL;
}
*mask = PCF8523_RTC_ALARM_TIME_MASK;
return 0;
}
static int pcf8523_alarm_set_time(const struct device *dev, uint16_t id, uint16_t mask,
const struct rtc_time *timeptr)
{
uint8_t regs[4];
if (id != 0U) {
LOG_ERR("invalid ID %d", id);
return -EINVAL;
}
if ((mask & ~(PCF8523_RTC_ALARM_TIME_MASK)) != 0U) {
LOG_ERR("unsupported alarm field mask 0x%04x", mask);
return -EINVAL;
}
if ((mask & RTC_ALARM_TIME_MASK_MINUTE) != 0U) {
regs[0] = bin2bcd(timeptr->tm_min) & PCF8523_MINUTE_ALARM_MASK;
} else {
regs[0] = PCF8523_MINUTE_ALARM_AEN_M;
}
if ((mask & RTC_ALARM_TIME_MASK_HOUR) != 0U) {
regs[1] = bin2bcd(timeptr->tm_hour) & PCF8523_HOUR_ALARM_24H_MASK;
} else {
regs[1] = PCF8523_HOUR_ALARM_AEN_H;
}
if ((mask & RTC_ALARM_TIME_MASK_MONTHDAY) != 0U) {
regs[2] = bin2bcd(timeptr->tm_mday) & PCF8523_DAY_ALARM_MASK;
} else {
regs[2] = PCF8523_DAY_ALARM_AEN_D;
}
if ((mask & RTC_ALARM_TIME_MASK_WEEKDAY) != 0U) {
regs[3] = bin2bcd(timeptr->tm_wday) & PCF8523_WEEKDAY_ALARM_MASK;
} else {
regs[3] = PCF8523_WEEKDAY_ALARM_AEN_W;
}
LOG_DBG("set alarm: year = %d, mon = %d, mday = %d, hour = %d, min = %d, mask = 0x%04x",
timeptr->tm_year, timeptr->tm_mon, timeptr->tm_mday, timeptr->tm_hour,
timeptr->tm_min, mask);
/* Write registers PCF8523_MINUTE_ALARM through PCF8523_WEEKDAY_ALARM */
return pcf8523_write_regs(dev, PCF8523_MINUTE_ALARM, &regs, sizeof(regs));
}
static int pcf8523_alarm_get_time(const struct device *dev, uint16_t id, uint16_t *mask,
struct rtc_time *timeptr)
{
uint8_t regs[4];
int err;
if (id != 0U) {
LOG_ERR("invalid ID %d", id);
return -EINVAL;
}
/* Read registers PCF8523_MINUTE_ALARM through PCF8523_WEEKDAY_ALARM */
err = pcf8523_read_regs(dev, PCF8523_MINUTE_ALARM, &regs, sizeof(regs));
if (err != 0) {
return err;
}
memset(timeptr, 0U, sizeof(*timeptr));
*mask = 0U;
if ((regs[0] & PCF8523_MINUTE_ALARM_AEN_M) == 0) {
timeptr->tm_min = bcd2bin(regs[0] & PCF8523_MINUTE_ALARM_MASK);
*mask |= RTC_ALARM_TIME_MASK_MINUTE;
}
if ((regs[1] & PCF8523_HOUR_ALARM_AEN_H) == 0) {
timeptr->tm_hour = bcd2bin(regs[1] & PCF8523_HOUR_ALARM_24H_MASK);
*mask |= RTC_ALARM_TIME_MASK_HOUR;
}
if ((regs[2] & PCF8523_DAY_ALARM_AEN_D) == 0) {
timeptr->tm_mday = bcd2bin(regs[2] & PCF8523_DAY_ALARM_MASK);
*mask |= RTC_ALARM_TIME_MASK_MONTHDAY;
}
if ((regs[3] & PCF8523_WEEKDAY_ALARM_AEN_W) == 0) {
timeptr->tm_wday = bcd2bin(regs[3] & PCF8523_WEEKDAY_ALARM_MASK);
*mask |= RTC_ALARM_TIME_MASK_WEEKDAY;
}
LOG_DBG("get alarm: year = %d, mon = %d, mday = %d, hour = %d, min = %d, mask = 0x%04x",
timeptr->tm_year, timeptr->tm_mon, timeptr->tm_mday, timeptr->tm_hour,
timeptr->tm_min, *mask);
return 0;
}
static int pcf8523_alarm_is_pending(const struct device *dev, uint16_t id)
{
struct pcf8523_data *data = dev->data;
uint8_t control_2;
int err;
if (id != 0U) {
LOG_ERR("invalid ID %d", id);
return -EINVAL;
}
k_mutex_lock(&data->lock, K_FOREVER);
err = pcf8523_read_reg8(dev, PCF8523_CONTROL_2, &control_2);
if (err != 0) {
goto unlock;
}
if ((control_2 & PCF8523_CONTROL_2_AF) != 0) {
/* Clear alarm flag */
control_2 &= ~(PCF8523_CONTROL_2_AF);
/* Ensure other flags are left unchanged (PCF8523 performs logic AND at write) */
control_2 |= PCF8523_CONTROL_2_CTAF | PCF8523_CONTROL_2_CTBF | PCF8523_CONTROL_2_SF;
err = pcf8523_write_reg8(dev, PCF8523_CONTROL_2, control_2);
if (err != 0) {
goto unlock;
}
/* Alarm pending */
err = 1;
}
unlock:
k_mutex_unlock(&data->lock);
return err;
}
#if PCF8523_INT1_GPIOS_IN_USE
static int pcf8523_alarm_set_callback(const struct device *dev, uint16_t id,
rtc_alarm_callback callback, void *user_data)
{
const struct pcf8523_config *config = dev->config;
struct pcf8523_data *data = dev->data;
uint8_t control_1;
int err = 0;
if (config->int1.port == NULL) {
return -ENOTSUP;
}
if (id != 0U) {
LOG_ERR("invalid ID %d", id);
return -EINVAL;
}
k_mutex_lock(&data->lock, K_FOREVER);
data->alarm_callback = callback;
data->alarm_user_data = user_data;
if (!config->wakeup_source) {
/* Only change AIE if not configured as wakeup-source */
err = pcf8523_read_reg8(dev, PCF8523_CONTROL_1, &control_1);
if (err != 0) {
goto unlock;
}
if (callback != NULL) {
control_1 |= PCF8523_CONTROL_1_AIE;
} else {
control_1 &= ~(PCF8523_CONTROL_1_AIE);
}
if ((control_1 & PCF8523_CONTROL_1_SIE) == 0U) {
/* Only change INT1 GPIO if seconds timer interrupt not enabled */
err = pcf8523_int1_enable_unlocked(dev, callback != NULL);
if (err != 0) {
goto unlock;
}
}
err = pcf8523_write_reg8(dev, PCF8523_CONTROL_1, control_1);
if (err != 0) {
goto unlock;
}
}
unlock:
k_mutex_unlock(&data->lock);
/* Wake up the INT1 thread since the alarm flag may already be set */
k_sem_give(&data->int1_sem);
return err;
}
#endif /* PCF8523_INT1_GPIOS_IN_USE */
#endif /* CONFIG_RTC_ALARM */
#if PCF8523_INT1_GPIOS_IN_USE && defined(CONFIG_RTC_UPDATE)
static int pcf8523_update_set_callback(const struct device *dev, rtc_update_callback callback,
void *user_data)
{
const struct pcf8523_config *config = dev->config;
struct pcf8523_data *data = dev->data;
uint8_t control_1;
int err;
if (config->int1.port == NULL) {
return -ENOTSUP;
}
k_mutex_lock(&data->lock, K_FOREVER);
data->update_callback = callback;
data->update_user_data = user_data;
err = pcf8523_read_reg8(dev, PCF8523_CONTROL_1, &control_1);
if (err != 0) {
goto unlock;
}
if (callback != NULL) {
control_1 |= PCF8523_CONTROL_1_SIE;
} else {
control_1 &= ~(PCF8523_CONTROL_1_SIE);
}
if ((control_1 & PCF8523_CONTROL_1_AIE) == 0U) {
/* Only change INT1 GPIO if alarm interrupt not enabled */
err = pcf8523_int1_enable_unlocked(dev, callback != NULL);
if (err != 0) {
goto unlock;
}
}
err = pcf8523_write_reg8(dev, PCF8523_CONTROL_1, control_1);
if (err != 0) {
goto unlock;
}
unlock:
k_mutex_unlock(&data->lock);
/* Wake up the INT1 thread since the seconds flag may already be set */
k_sem_give(&data->int1_sem);
return err;
}
#endif /* PCF8523_INT1_GPIOS_IN_USE && defined(CONFIG_RTC_UPDATE) */
#ifdef CONFIG_RTC_CALIBRATION
/* See PCF8523 data sheet table 29 */
#if defined(CONFIG_RTC_PCF8523_OFFSET_MODE_SLOW)
#define PCF8523_OFFSET_PPB_PER_LSB 4340
#elif defined(CONFIG_RTC_PCF8523_OFFSET_MODE_FAST)
#define PCF8523_OFFSET_PPB_PER_LSB 4069
#else
#error Unsupported offset mode
#endif
#define PCF8523_OFFSET_PPB_MIN (-64 * PCF8523_OFFSET_PPB_PER_LSB)
#define PCF8523_OFFSET_PPB_MAX (63 * PCF8523_OFFSET_PPB_PER_LSB)
static int pcf8523_set_calibration(const struct device *dev, int32_t freq_ppb)
{
int32_t period_ppb = freq_ppb * -1;
int8_t offset;
if (period_ppb < PCF8523_OFFSET_PPB_MIN || period_ppb > PCF8523_OFFSET_PPB_MAX) {
LOG_WRN("calibration value (%d ppb) out of range", freq_ppb);
return -EINVAL;
}
offset = period_ppb / PCF8523_OFFSET_PPB_PER_LSB;
if (IS_ENABLED(CONFIG_RTC_PCF8523_OFFSET_MODE_FAST)) {
offset |= PCF8523_OFFSET_MODE;
}
LOG_DBG("freq_ppb = %d, period_ppb = %d, offset = %d", freq_ppb, period_ppb, offset);
return pcf8523_write_reg8(dev, PCF8523_OFFSET, offset);
}
static int pcf8523_get_calibration(const struct device *dev, int32_t *freq_ppb)
{
int32_t period_ppb;
int8_t offset;
int err;
err = pcf8523_read_reg8(dev, PCF8523_OFFSET, &offset);
if (err != 0) {
return err;
}
/* Clear mode bit and sign extend the offset */
period_ppb = (offset << 1U) >> 1U;
period_ppb = period_ppb * PCF8523_OFFSET_PPB_PER_LSB;
*freq_ppb = period_ppb * -1;
LOG_DBG("freq_ppb = %d, period_ppb = %d, offset = %d", *freq_ppb, period_ppb, offset);
return 0;
}
#endif /* CONFIG_RTC_CALIBRATION */
static int pcf8523_init(const struct device *dev)
{
const struct pcf8523_config *config = dev->config;
struct pcf8523_data *data = dev->data;
uint8_t tmr_clkout_ctrl;
uint8_t regs[3];
int err;
k_mutex_init(&data->lock);
if (!i2c_is_ready_dt(&config->i2c)) {
LOG_ERR("I2C bus not ready");
return -ENODEV;
}
#if PCF8523_INT1_GPIOS_IN_USE
k_tid_t tid;
if (config->int1.port != NULL) {
k_sem_init(&data->int1_sem, 0, INT_MAX);
if (!gpio_is_ready_dt(&config->int1)) {
LOG_ERR("GPIO not ready");
return -ENODEV;
}
err = gpio_pin_configure_dt(&config->int1, GPIO_INPUT);
if (err != 0) {
LOG_ERR("failed to configure GPIO (err %d)", err);
return -ENODEV;
}
gpio_init_callback(&data->int1_callback, pcf8523_int1_callback_handler,
BIT(config->int1.pin));
err = gpio_add_callback_dt(&config->int1, &data->int1_callback);
if (err != 0) {
LOG_ERR("failed to add GPIO callback (err %d)", err);
return -ENODEV;
}
tid = k_thread_create(&data->int1_thread, data->int1_stack,
K_THREAD_STACK_SIZEOF(data->int1_stack),
pcf8523_int1_thread, (void *)dev, NULL,
NULL, CONFIG_RTC_PCF8523_THREAD_PRIO, 0, K_NO_WAIT);
k_thread_name_set(tid, "pcf8523");
/*
* Defer GPIO interrupt configuration due to INT1/CLKOUT pin sharing. This allows
* using the CLKOUT square-wave signal for RTC calibration when no alarm/update
* callbacks are enabled (and not configured as a wakeup-source).
*/
}
#endif /* PCF8523_INT1_GPIOS_IN_USE */
/*
* Manually initialize the required PCF8523 registers as performing a software reset will
* reset the time circuits.
*/
/* Read registers PCF8523_CONTROL_1 through PCF8523_CONTROL_3 */
err = pcf8523_read_regs(dev, PCF8523_CONTROL_1, &regs, sizeof(regs));
if (err != 0) {
return -ENODEV;
}
/* Set quartz crystal load capacitance */
if (config->cap_sel) {
regs[0] |= PCF8523_CONTROL_1_CAP_SEL;
} else {
regs[0] &= ~(PCF8523_CONTROL_1_CAP_SEL);
}
/* Use 24h time format */
regs[0] &= ~(PCF8523_CONTROL_1_12_24);
/* Disable second, alarm, and correction interrupts */
regs[0] &= ~(PCF8523_CONTROL_1_SIE | PCF8523_CONTROL_1_AIE | PCF8523_CONTROL_1_CIE);
if (config->wakeup_source) {
/*
* Always set AIE if wakeup-source. This allows the RTC to wake up the system even
* if the INT1 interrupt output is not directly connected to a GPIO (i.e. if
* connected to a PMIC input).
*/
regs[0] |= PCF8523_CONTROL_1_AIE;
}
/* Clear interrupt flags (except alarm flag, as a wake-up alarm may be pending) */
regs[1] &= ~(PCF8523_CONTROL_2_CTAF | PCF8523_CONTROL_2_CTBF | PCF8523_CONTROL_2_SF);
/* Disable watchdog, timer A, and timer B interrupts */
regs[1] &= ~(PCF8523_CONTROL_2_WTAIE | PCF8523_CONTROL_2_CTAIE | PCF8523_CONTROL_2_CTBIE);
/* Configure battery switch-over function */
regs[2] &= ~(PCF8523_CONTROL_3_PM_MASK);
regs[2] |= FIELD_PREP(PCF8523_CONTROL_3_PM_MASK, config->pm);
/* Clear battery status interrupt flag */
regs[2] &= ~(PCF8523_CONTROL_3_BSF);
/* Disable battery status interrupts */
regs[2] &= ~(PCF8523_CONTROL_3_BSIE | PCF8523_CONTROL_3_BLIE);
/* Write registers PCF8523_CONTROL_1 through PCF8523_CONTROL_3 */
err = pcf8523_write_regs(dev, PCF8523_CONTROL_1, &regs, sizeof(regs));
if (err != 0) {
return -ENODEV;
}
/* Disable watchdog and countdown timers, configure IRQ level*/
tmr_clkout_ctrl = 0U;
if (config->wakeup_source) {
/* Disable CLKOUT */
tmr_clkout_ctrl |= PCF8523_TMR_CLKOUT_CTRL_COF_MASK;
} else {
/* Configure CLKOUT frequency */
tmr_clkout_ctrl |= FIELD_PREP(PCF8523_TMR_CLKOUT_CTRL_COF_MASK, config->cof);
}
err = pcf8523_write_reg8(dev, PCF8523_TMR_CLKOUT_CTRL, tmr_clkout_ctrl);
if (err != 0) {
return -ENODEV;
}
return 0;
}
/* Mapping from DT battery-switch-over enum to CONTROL_3 PM field value */
#define PCF8523_PM_STANDARD 4U
#define PCF8523_PM_DIRECT 5U
#define PCF8523_PM_DISABLED 7U
#ifdef CONFIG_PM_DEVICE
static int pcf8523_pm_action(const struct device *dev, enum pm_device_action action)
{
const struct pcf8523_config *config = dev->config;
uint8_t control_3;
int err;
if (config->pm == PCF8523_PM_DISABLED) {
/* Only one power supply */
return -ENOTSUP;
}
switch (action) {
case PM_DEVICE_ACTION_SUSPEND:
/* Disable battery switch-over function */
control_3 = FIELD_PREP(PCF8523_CONTROL_3_PM_MASK, PCF8523_PM_DISABLED);
break;
case PM_DEVICE_ACTION_RESUME:
/* Re-enable battery switch-over function */
control_3 = FIELD_PREP(PCF8523_CONTROL_3_PM_MASK, config->pm);
break;
default:
return -ENOTSUP;
}
err = pcf8523_write_reg8(dev, PCF8523_CONTROL_3, control_3);
if (err != 0) {
return -EIO;
}
return 0;
}
#endif /* CONFIG_PM_DEVICE */
static const struct rtc_driver_api pcf8523_driver_api = {
.set_time = pcf8523_set_time,
.get_time = pcf8523_get_time,
#ifdef CONFIG_RTC_ALARM
.alarm_get_supported_fields = pcf8523_alarm_get_supported_fields,
.alarm_set_time = pcf8523_alarm_set_time,
.alarm_get_time = pcf8523_alarm_get_time,
.alarm_is_pending = pcf8523_alarm_is_pending,
#if PCF8523_INT1_GPIOS_IN_USE
.alarm_set_callback = pcf8523_alarm_set_callback,
#endif /* PCF8523_INT1_GPIOS_IN_USE */
#endif /* CONFIG_RTC_ALARM */
#if PCF8523_INT1_GPIOS_IN_USE && defined(CONFIG_RTC_UPDATE)
.update_set_callback = pcf8523_update_set_callback,
#endif /* PCF8523_INT1_GPIOS_IN_USE && defined(CONFIG_RTC_UPDATE) */
#ifdef CONFIG_RTC_CALIBRATION
.set_calibration = pcf8523_set_calibration,
.get_calibration = pcf8523_get_calibration,
#endif /* CONFIG_RTC_CALIBRATION */
};
#define PCF8523_PM_FROM_DT_INST(inst) \
UTIL_CAT(PCF8523_PM_, DT_INST_STRING_UPPER_TOKEN(inst, battery_switch_over))
#define PCF8523_CAP_SEL_FROM_DT_INST(inst) (DT_INST_PROP(inst, quartz_load_femtofarads) == 12500)
#define PCF8523_INIT(inst) \
static const struct pcf8523_config pcf8523_config_##inst = { \
.i2c = I2C_DT_SPEC_INST_GET(inst), \
.cof = DT_INST_ENUM_IDX(inst, clkout_frequency), \
.pm = PCF8523_PM_FROM_DT_INST(inst), \
.cap_sel = PCF8523_CAP_SEL_FROM_DT_INST(inst), \
.wakeup_source = DT_INST_PROP(inst, wakeup_source), \
IF_ENABLED(PCF8523_INT1_GPIOS_IN_USE, \
(.int1 = GPIO_DT_SPEC_INST_GET_OR(inst, int1_gpios, {0})))}; \
\
static struct pcf8523_data pcf8523_data_##inst; \
\
PM_DEVICE_DT_INST_DEFINE(inst, pcf8523_pm_action); \
\
DEVICE_DT_INST_DEFINE(inst, &pcf8523_init, PM_DEVICE_DT_INST_GET(inst), \
&pcf8523_data_##inst, &pcf8523_config_##inst, POST_KERNEL, \
CONFIG_RTC_INIT_PRIORITY, &pcf8523_driver_api);
DT_INST_FOREACH_STATUS_OKAY(PCF8523_INIT)