soc/nxp/kinetis/ke1xf/Kconfig

# Kinetis KE1xF series MCU

# Copyright (c) 2019 Vestas Wind Systems A/S
# Copyright 2024 NXP
# SPDX-License-Identifier: Apache-2.0

config SOC_SERIES_KINETIS_KE1XF
	select ARM
	select CPU_CORTEX_M4
	select CPU_CORTEX_M_HAS_DWT
	select CPU_HAS_NXP_MPU
	select CPU_HAS_FPU
	select CLOCK_CONTROL
	select HAS_MCUX
	select HAS_MCUX_CACHE
	select HAS_MCUX_FTFX
	select HAS_MCUX_LPI2C
	select HAS_MCUX_LPSPI
	select HAS_MCUX_LPUART
	select HAS_MCUX_PCC
	select HAS_MCUX_RTC
	select HAS_MCUX_SIM
	select HAS_MCUX_ADC12
	select HAS_MCUX_SCG
	select HAS_MCUX_WDOG32
	select HAS_MCUX_FTM
	select HAS_MCUX_LPTMR
	select HAS_MCUX_DAC32
	select HAS_MCUX_EDMA
	select HAS_MCUX_ACMP
	select HAS_MCUX_PWT
	select HAS_MCUX_RCM
	select PLATFORM_SPECIFIC_INIT
	select HAS_PM

config SOC_MKE16F16
	select HAS_MCUX
	select HAS_MCUX_FLEXCAN

config SOC_MKE18F16
	select HAS_MCUX
	select HAS_MCUX_FLEXCAN

if SOC_SERIES_KINETIS_KE1XF

config WDOG_ENABLE_AT_BOOT
	bool "Keep watchdog timer enabled at boot"
	help
	  Keep the watchdog timer enabled at boot with the internal
	  128kHz LPO clock (and a prescaler of 256) as clock
	  source. The application can take over control of the
	  watchdog timer after boot and install a different timeout,
	  if needed.

config WDOG_INITIAL_TIMEOUT
	int "Initial timeout for the watchdog timer in milliseconds"
	depends on WDOG_ENABLE_AT_BOOT && WDOG_INIT
	range 2 131070
	default 2048
	help
	  Initial timeout value for the watchdog timer in
	  milliseconds.

config KINETIS_KE1XF_ENABLE_CODE_CACHE
	bool "Code cache"
	default y

endif # SOC_SERIES_KINETIS_KE1XF