| /* lsm6dsl_spi.c - SPI routines for LSM6DSL driver |
| */ |
| |
| /* |
| * Copyright (c) 2018 STMicroelectronics |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT st_lsm6dsl |
| |
| #include <string.h> |
| #include <zephyr/logging/log.h> |
| |
| #include "lsm6dsl.h" |
| |
| #if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) |
| |
| #define LSM6DSL_SPI_READ (1 << 7) |
| |
| LOG_MODULE_DECLARE(LSM6DSL, CONFIG_SENSOR_LOG_LEVEL); |
| |
| static int lsm6dsl_raw_read(const struct device *dev, uint8_t reg_addr, |
| uint8_t *value, uint8_t len) |
| { |
| const struct lsm6dsl_config *cfg = dev->config; |
| uint8_t buffer_tx[2] = { reg_addr | LSM6DSL_SPI_READ, 0 }; |
| const struct spi_buf tx_buf = { |
| .buf = buffer_tx, |
| .len = 2, |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = &tx_buf, |
| .count = 1 |
| }; |
| const struct spi_buf rx_buf[2] = { |
| { |
| .buf = NULL, |
| .len = 1, |
| }, |
| { |
| .buf = value, |
| .len = len, |
| } |
| }; |
| const struct spi_buf_set rx = { |
| .buffers = rx_buf, |
| .count = 2 |
| }; |
| |
| |
| if (len > 64) { |
| return -EIO; |
| } |
| |
| if (spi_transceive_dt(&cfg->bus_cfg.spi, &tx, &rx)) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int lsm6dsl_raw_write(const struct device *dev, uint8_t reg_addr, |
| uint8_t *value, uint8_t len) |
| { |
| const struct lsm6dsl_config *cfg = dev->config; |
| uint8_t buffer_tx[1] = { reg_addr & ~LSM6DSL_SPI_READ }; |
| const struct spi_buf tx_buf[2] = { |
| { |
| .buf = buffer_tx, |
| .len = 1, |
| }, |
| { |
| .buf = value, |
| .len = len, |
| } |
| }; |
| const struct spi_buf_set tx = { |
| .buffers = tx_buf, |
| .count = 2 |
| }; |
| |
| |
| if (len > 64) { |
| return -EIO; |
| } |
| |
| if (spi_write_dt(&cfg->bus_cfg.spi, &tx)) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int lsm6dsl_spi_read_data(const struct device *dev, uint8_t reg_addr, |
| uint8_t *value, uint8_t len) |
| { |
| return lsm6dsl_raw_read(dev, reg_addr, value, len); |
| } |
| |
| static int lsm6dsl_spi_write_data(const struct device *dev, uint8_t reg_addr, |
| uint8_t *value, uint8_t len) |
| { |
| return lsm6dsl_raw_write(dev, reg_addr, value, len); |
| } |
| |
| static int lsm6dsl_spi_read_reg(const struct device *dev, uint8_t reg_addr, |
| uint8_t *value) |
| { |
| return lsm6dsl_raw_read(dev, reg_addr, value, 1); |
| } |
| |
| static int lsm6dsl_spi_update_reg(const struct device *dev, uint8_t reg_addr, |
| uint8_t mask, uint8_t value) |
| { |
| uint8_t tmp_val; |
| |
| lsm6dsl_raw_read(dev, reg_addr, &tmp_val, 1); |
| tmp_val = (tmp_val & ~mask) | (value & mask); |
| |
| return lsm6dsl_raw_write(dev, reg_addr, &tmp_val, 1); |
| } |
| |
| static const struct lsm6dsl_transfer_function lsm6dsl_spi_transfer_fn = { |
| .read_data = lsm6dsl_spi_read_data, |
| .write_data = lsm6dsl_spi_write_data, |
| .read_reg = lsm6dsl_spi_read_reg, |
| .update_reg = lsm6dsl_spi_update_reg, |
| }; |
| |
| int lsm6dsl_spi_init(const struct device *dev) |
| { |
| struct lsm6dsl_data *data = dev->data; |
| const struct lsm6dsl_config *cfg = dev->config; |
| |
| data->hw_tf = &lsm6dsl_spi_transfer_fn; |
| |
| if (!spi_is_ready(&cfg->bus_cfg.spi)) { |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| #endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) */ |