/** | |
****************************************************************************** | |
* @file stm32f1xx_hal_can_ex.h | |
* @author MCD Application Team | |
* @version V1.1.1 | |
* @date 12-May-2017 | |
* @brief Header file of CAN HAL Extension module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F1xx_HAL_CAN_EX_H | |
#define __STM32F1xx_HAL_CAN_EX_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \ | |
defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f1xx_hal_def.h" | |
/** @addtogroup STM32F1xx_HAL_Driver | |
* @{ | |
*/ | |
/** @defgroup CANEx CANEx | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** | |
* @brief CAN filter configuration structure definition | |
*/ | |
/* CAN filter banks differences over STM32F1 devices: */ | |
/* - STM32F1 Connectivity line: 28 filter banks shared between CAN1 and CAN2 */ | |
/* - Other STM32F10x devices: 14 filter banks */ | |
typedef struct | |
{ | |
uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit | |
configuration, first one for a 16-bit configuration). | |
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit | |
configuration, second one for a 16-bit configuration). | |
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, | |
according to the mode (MSBs for a 32-bit configuration, | |
first one for a 16-bit configuration). | |
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, | |
according to the mode (LSBs for a 32-bit configuration, | |
second one for a 16-bit configuration). | |
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ | |
uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. | |
This parameter can be a value of @ref CAN_filter_FIFO */ | |
#if defined(STM32F105xC) || defined(STM32F107xC) | |
uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. | |
This parameter must be a number between Min_Data = 0 and Max_Data = 27. */ | |
#else | |
uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. | |
This parameter must be a number between Min_Data = 0 and Max_Data = 13. */ | |
#endif /* STM32F105xC || STM32F107xC */ | |
uint32_t FilterMode; /*!< Specifies the filter mode to be initialized. | |
This parameter can be a value of @ref CAN_filter_mode */ | |
uint32_t FilterScale; /*!< Specifies the filter scale. | |
This parameter can be a value of @ref CAN_filter_scale */ | |
uint32_t FilterActivation; /*!< Enable or disable the filter. | |
This parameter can be set to ENABLE or DISABLE. */ | |
uint32_t BankNumber; /*!< Select the start slave bank filter | |
This parameter must be a number between Min_Data = 0 and Max_Data = 28. */ | |
}CAN_FilterConfTypeDef; | |
/* Exported constants --------------------------------------------------------*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/* Private macro -------------------------------------------------------------*/ | |
/** @defgroup CANEx_Private_Macros CAN Extended Private Macros | |
* @{ | |
*/ | |
#if defined(STM32F105xC) || defined(STM32F107xC) | |
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U) | |
#else | |
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13U) | |
#endif /* STM32F105xC || STM32F107xC */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F1xx_HAL_CAN_EX_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |