/** | |
****************************************************************************** | |
* @file stm32f1xx_hal_dac.h | |
* @author MCD Application Team | |
* @version V1.1.1 | |
* @date 12-May-2017 | |
* @brief Header file of DAC HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F1xx_HAL_DAC_H | |
#define __STM32F1xx_HAL_DAC_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f1xx_hal_def.h" | |
/** @addtogroup STM32F1xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup DAC | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup DAC_Exported_Types DAC Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief HAL State structures definition | |
*/ | |
typedef enum | |
{ | |
HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */ | |
HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */ | |
HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */ | |
HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */ | |
HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */ | |
}HAL_DAC_StateTypeDef; | |
/** | |
* @brief DAC handle Structure definition | |
*/ | |
typedef struct | |
{ | |
DAC_TypeDef *Instance; /*!< Register base address */ | |
__IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ | |
HAL_LockTypeDef Lock; /*!< DAC locking object */ | |
DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ | |
DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */ | |
__IO uint32_t ErrorCode; /*!< DAC Error code */ | |
}DAC_HandleTypeDef; | |
/** | |
* @brief DAC Configuration regular Channel structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. | |
This parameter can be a value of @ref DACEx_trigger_selection | |
Note: For STM32F100x high-density value line devices, additional trigger sources are available. */ | |
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. | |
This parameter can be a value of @ref DAC_output_buffer */ | |
}DAC_ChannelConfTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup DAC_Exported_Constants DAC Exported Constants | |
* @{ | |
*/ | |
/** @defgroup DAC_Error_Code DAC Error Code | |
* @{ | |
*/ | |
#define HAL_DAC_ERROR_NONE 0x00000000U /*!< No error */ | |
#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x00000001U /*!< DAC channel1 DMA underrun error */ | |
#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x00000002U /*!< DAC channel2 DMA underrun error */ | |
#define HAL_DAC_ERROR_DMA 0x00000004U /*!< DMA error */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DAC_output_buffer DAC output buffer | |
* @{ | |
*/ | |
#define DAC_OUTPUTBUFFER_ENABLE 0x00000000U | |
#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1) | |
/** | |
* @} | |
*/ | |
/** @defgroup DAC_Channel_selection DAC Channel selection | |
* @{ | |
*/ | |
#define DAC_CHANNEL_1 0x00000000U | |
#define DAC_CHANNEL_2 0x00000010U | |
/** | |
* @} | |
*/ | |
/** @defgroup DAC_data_alignement DAC data alignement | |
* @{ | |
*/ | |
#define DAC_ALIGN_12B_R 0x00000000U | |
#define DAC_ALIGN_12B_L 0x00000004U | |
#define DAC_ALIGN_8B_R 0x00000008U | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup DAC_Exported_Macros DAC Exported Macros | |
* @{ | |
*/ | |
/** @brief Reset DAC handle state | |
* @param __HANDLE__: specifies the DAC handle. | |
* @retval None | |
*/ | |
#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) | |
/** @brief Enable the DAC channel | |
* @param __HANDLE__: specifies the DAC handle. | |
* @param __DAC_Channel__: specifies the DAC channel | |
* @retval None | |
*/ | |
#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \ | |
((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__))) | |
/** @brief Disable the DAC channel | |
* @param __HANDLE__: specifies the DAC handle | |
* @param __DAC_Channel__: specifies the DAC channel. | |
* @retval None | |
*/ | |
#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \ | |
((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__))) | |
/** | |
* @} | |
*/ | |
/* Private macro -------------------------------------------------------------*/ | |
/** @defgroup DAC_Private_Macros DAC Private Macros | |
* @{ | |
*/ | |
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ | |
((STATE) == DAC_OUTPUTBUFFER_DISABLE)) | |
#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ | |
((CHANNEL) == DAC_CHANNEL_2)) | |
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ | |
((ALIGN) == DAC_ALIGN_12B_L) || \ | |
((ALIGN) == DAC_ALIGN_8B_R)) | |
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U) | |
#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008U + (__ALIGNMENT__)) | |
#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014U + (__ALIGNMENT__)) | |
#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020U + (__ALIGNMENT__)) | |
/** | |
* @} | |
*/ | |
/* Include DAC HAL Extension module */ | |
#include "stm32f1xx_hal_dac_ex.h" | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup DAC_Exported_Functions | |
* @{ | |
*/ | |
/** @addtogroup DAC_Exported_Functions_Group1 | |
* @{ | |
*/ | |
/* Initialization and de-initialization functions *****************************/ | |
HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac); | |
HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac); | |
void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac); | |
void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac); | |
/** | |
* @} | |
*/ | |
/** @addtogroup DAC_Exported_Functions_Group2 | |
* @{ | |
*/ | |
/* IO operation functions *****************************************************/ | |
HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel); | |
HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel); | |
HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment); | |
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel); | |
HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); | |
uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel); | |
/** | |
* @} | |
*/ | |
/** @addtogroup DAC_Exported_Functions_Group3 | |
* @{ | |
*/ | |
/* Peripheral Control functions ***********************************************/ | |
HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel); | |
/** | |
* @} | |
*/ | |
/** @addtogroup DAC_Exported_Functions_Group4 | |
* @{ | |
*/ | |
/* Peripheral State functions *************************************************/ | |
HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac); | |
uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac); | |
void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac); | |
void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac); | |
void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** @addtogroup DAC_Private_Functions DAC Private Functions | |
* @{ | |
*/ | |
void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma); | |
void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); | |
void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* STM32F100xB || STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /*__STM32F1xx_HAL_DAC_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ | |