/** | |
****************************************************************************** | |
* @file stm32f1xx_hal_dma.h | |
* @author MCD Application Team | |
* @version V1.1.1 | |
* @date 12-May-2017 | |
* @brief Header file of DMA HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F1xx_HAL_DMA_H | |
#define __STM32F1xx_HAL_DMA_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f1xx_hal_def.h" | |
/** @addtogroup STM32F1xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup DMA | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup DMA_Exported_Types DMA Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief DMA Configuration Structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, | |
from memory to memory or from peripheral to memory. | |
This parameter can be a value of @ref DMA_Data_transfer_direction */ | |
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. | |
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ | |
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. | |
This parameter can be a value of @ref DMA_Memory_incremented_mode */ | |
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. | |
This parameter can be a value of @ref DMA_Peripheral_data_size */ | |
uint32_t MemDataAlignment; /*!< Specifies the Memory data width. | |
This parameter can be a value of @ref DMA_Memory_data_size */ | |
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. | |
This parameter can be a value of @ref DMA_mode | |
@note The circular buffer mode cannot be used if the memory-to-memory | |
data transfer is configured on the selected Channel */ | |
uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. | |
This parameter can be a value of @ref DMA_Priority_level */ | |
} DMA_InitTypeDef; | |
/** | |
* @brief HAL DMA State structures definition | |
*/ | |
typedef enum | |
{ | |
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ | |
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ | |
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ | |
HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ | |
}HAL_DMA_StateTypeDef; | |
/** | |
* @brief HAL DMA Error Code structure definition | |
*/ | |
typedef enum | |
{ | |
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ | |
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ | |
}HAL_DMA_LevelCompleteTypeDef; | |
/** | |
* @brief HAL DMA Callback ID structure definition | |
*/ | |
typedef enum | |
{ | |
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ | |
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ | |
HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ | |
HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ | |
HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ | |
}HAL_DMA_CallbackIDTypeDef; | |
/** | |
* @brief DMA handle Structure definition | |
*/ | |
typedef struct __DMA_HandleTypeDef | |
{ | |
DMA_Channel_TypeDef *Instance; /*!< Register base address */ | |
DMA_InitTypeDef Init; /*!< DMA communication parameters */ | |
HAL_LockTypeDef Lock; /*!< DMA locking object */ | |
HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ | |
void *Parent; /*!< Parent object state */ | |
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ | |
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ | |
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ | |
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ | |
__IO uint32_t ErrorCode; /*!< DMA Error code */ | |
DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ | |
uint32_t ChannelIndex; /*!< DMA Channel Index */ | |
} DMA_HandleTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup DMA_Exported_Constants DMA Exported Constants | |
* @{ | |
*/ | |
/** @defgroup DMA_Error_Code DMA Error Code | |
* @{ | |
*/ | |
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ | |
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ | |
#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< no ongoing transfer */ | |
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ | |
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction | |
* @{ | |
*/ | |
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ | |
#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ | |
#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode | |
* @{ | |
*/ | |
#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ | |
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode | |
* @{ | |
*/ | |
#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ | |
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size | |
* @{ | |
*/ | |
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ | |
#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ | |
#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_Memory_data_size DMA Memory data size | |
* @{ | |
*/ | |
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ | |
#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ | |
#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_mode DMA mode | |
* @{ | |
*/ | |
#define DMA_NORMAL 0x00000000U /*!< Normal mode */ | |
#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_Priority_level DMA Priority level | |
* @{ | |
*/ | |
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ | |
#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ | |
#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ | |
#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions | |
* @{ | |
*/ | |
#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) | |
#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) | |
#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) | |
/** | |
* @} | |
*/ | |
/** @defgroup DMA_flag_definitions DMA flag definitions | |
* @{ | |
*/ | |
#define DMA_FLAG_GL1 0x00000001U | |
#define DMA_FLAG_TC1 0x00000002U | |
#define DMA_FLAG_HT1 0x00000004U | |
#define DMA_FLAG_TE1 0x00000008U | |
#define DMA_FLAG_GL2 0x00000010U | |
#define DMA_FLAG_TC2 0x00000020U | |
#define DMA_FLAG_HT2 0x00000040U | |
#define DMA_FLAG_TE2 0x00000080U | |
#define DMA_FLAG_GL3 0x00000100U | |
#define DMA_FLAG_TC3 0x00000200U | |
#define DMA_FLAG_HT3 0x00000400U | |
#define DMA_FLAG_TE3 0x00000800U | |
#define DMA_FLAG_GL4 0x00001000U | |
#define DMA_FLAG_TC4 0x00002000U | |
#define DMA_FLAG_HT4 0x00004000U | |
#define DMA_FLAG_TE4 0x00008000U | |
#define DMA_FLAG_GL5 0x00010000U | |
#define DMA_FLAG_TC5 0x00020000U | |
#define DMA_FLAG_HT5 0x00040000U | |
#define DMA_FLAG_TE5 0x00080000U | |
#define DMA_FLAG_GL6 0x00100000U | |
#define DMA_FLAG_TC6 0x00200000U | |
#define DMA_FLAG_HT6 0x00400000U | |
#define DMA_FLAG_TE6 0x00800000U | |
#define DMA_FLAG_GL7 0x01000000U | |
#define DMA_FLAG_TC7 0x02000000U | |
#define DMA_FLAG_HT7 0x04000000U | |
#define DMA_FLAG_TE7 0x08000000U | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macros -----------------------------------------------------------*/ | |
/** @defgroup DMA_Exported_Macros DMA Exported Macros | |
* @{ | |
*/ | |
/** @brief Reset DMA handle state. | |
* @param __HANDLE__: DMA handle | |
* @retval None | |
*/ | |
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) | |
/** | |
* @brief Enable the specified DMA Channel. | |
* @param __HANDLE__: DMA handle | |
* @retval None | |
*/ | |
#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) | |
/** | |
* @brief Disable the specified DMA Channel. | |
* @param __HANDLE__: DMA handle | |
* @retval None | |
*/ | |
#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) | |
/* Interrupt & Flag management */ | |
/** | |
* @brief Enables the specified DMA Channel interrupts. | |
* @param __HANDLE__: DMA handle | |
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. | |
* This parameter can be any combination of the following values: | |
* @arg DMA_IT_TC: Transfer complete interrupt mask | |
* @arg DMA_IT_HT: Half transfer complete interrupt mask | |
* @arg DMA_IT_TE: Transfer error interrupt mask | |
* @retval None | |
*/ | |
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__))) | |
/** | |
* @brief Disable the specified DMA Channel interrupts. | |
* @param __HANDLE__: DMA handle | |
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. | |
* This parameter can be any combination of the following values: | |
* @arg DMA_IT_TC: Transfer complete interrupt mask | |
* @arg DMA_IT_HT: Half transfer complete interrupt mask | |
* @arg DMA_IT_TE: Transfer error interrupt mask | |
* @retval None | |
*/ | |
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__))) | |
/** | |
* @brief Check whether the specified DMA Channel interrupt is enabled or not. | |
* @param __HANDLE__: DMA handle | |
* @param __INTERRUPT__: specifies the DMA interrupt source to check. | |
* This parameter can be one of the following values: | |
* @arg DMA_IT_TC: Transfer complete interrupt mask | |
* @arg DMA_IT_HT: Half transfer complete interrupt mask | |
* @arg DMA_IT_TE: Transfer error interrupt mask | |
* @retval The state of DMA_IT (SET or RESET). | |
*/ | |
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) | |
/** | |
* @brief Return the number of remaining data units in the current DMA Channel transfer. | |
* @param __HANDLE__: DMA handle | |
* @retval The number of remaining data units in the current DMA Channel transfer. | |
*/ | |
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) | |
/** | |
* @} | |
*/ | |
/* Include DMA HAL Extension module */ | |
#include "stm32f1xx_hal_dma_ex.h" | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup DMA_Exported_Functions | |
* @{ | |
*/ | |
/** @addtogroup DMA_Exported_Functions_Group1 | |
* @{ | |
*/ | |
/* Initialization and de-initialization functions *****************************/ | |
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); | |
HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); | |
/** | |
* @} | |
*/ | |
/** @addtogroup DMA_Exported_Functions_Group2 | |
* @{ | |
*/ | |
/* IO operation functions *****************************************************/ | |
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); | |
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); | |
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); | |
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); | |
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); | |
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); | |
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); | |
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); | |
/** | |
* @} | |
*/ | |
/** @addtogroup DMA_Exported_Functions_Group3 | |
* @{ | |
*/ | |
/* Peripheral State and Error functions ***************************************/ | |
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); | |
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup DMA_Private_Macros DMA Private Macros | |
* @{ | |
*/ | |
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ | |
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ | |
((DIRECTION) == DMA_MEMORY_TO_MEMORY)) | |
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) | |
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ | |
((STATE) == DMA_PINC_DISABLE)) | |
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ | |
((STATE) == DMA_MINC_DISABLE)) | |
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ | |
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ | |
((SIZE) == DMA_PDATAALIGN_WORD)) | |
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ | |
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ | |
((SIZE) == DMA_MDATAALIGN_WORD )) | |
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ | |
((MODE) == DMA_CIRCULAR)) | |
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ | |
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ | |
((PRIORITY) == DMA_PRIORITY_HIGH) || \ | |
((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) | |
/** | |
* @} | |
*/ | |
/* Private functions ---------------------------------------------------------*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F1xx_HAL_DMA_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |