blob: 74fcc4a50403647d4dbad12563163f0ba836f2b1 [file] [log] [blame]
/*
* Copyright (c) 2023 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <errno.h>
#include <zephyr/device.h>
#include <zephyr/drivers/uart.h>
#include <zephyr/pm/device.h>
#include "sedi_driver_uart.h"
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static void uart_sedi_isr(void *arg);
static void uart_sedi_cb(struct device *port);
#endif
#define DT_DRV_COMPAT intel_sedi_uart
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
/* UART IRQ handler declaration. */
#define UART_IRQ_HANDLER_DECL(n) \
static void irq_config_uart_##n(const struct device *dev)
/* Setting configuration function. */
#define UART_CONFIG_IRQ_HANDLER_SET(n) \
.uart_irq_config_func = irq_config_uart_##n
#define UART_IRQ_HANDLER_DEFINE(n) \
static void irq_config_uart_##n(const struct device *dev) \
{ \
ARG_UNUSED(dev); \
IRQ_CONNECT(DT_INST_IRQN(n), \
DT_INST_IRQ(n, priority), uart_sedi_isr, \
DEVICE_DT_GET(DT_NODELABEL(uart##n)), \
DT_INST_IRQ(n, sense)); \
irq_enable(DT_INST_IRQN(n)); \
}
#else /*CONFIG_UART_INTERRUPT_DRIVEN */
#define UART_IRQ_HANDLER_DECL(n)
#define UART_CONFIG_IRQ_HANDLER_SET(n) (0)
#define UART_IRQ_HANDLER_DEFINE(n)
#endif /* !CONFIG_UART_INTERRUPT_DRIVEN */
/* Device init macro for UART instance. As multiple uart instances follow a
* similar definition of data structures differing only in the instance
* number.This macro makes adding instances simpler.
*/
#define UART_SEDI_DEVICE_INIT(n) \
UART_IRQ_HANDLER_DECL(n); \
static K_MUTEX_DEFINE(uart_##n##_mutex); \
static K_SEM_DEFINE(uart_##n##_tx_sem, 1, 1); \
static K_SEM_DEFINE(uart_##n##_rx_sem, 1, 1); \
static K_SEM_DEFINE(uart_##n##_sync_read_sem, 0, 1); \
static const struct uart_sedi_config_info config_info_##n = { \
DEVICE_MMIO_ROM_INIT(DT_DRV_INST(n)), \
.instance = DT_INST_PROP(n, peripheral_id), \
.baud_rate = DT_INST_PROP(n, current_speed), \
.hw_fc = DT_INST_PROP(n, hw_flow_control), \
.line_ctrl = SEDI_UART_LC_8N1, \
.mutex = &uart_##n##_mutex, \
UART_CONFIG_IRQ_HANDLER_SET(n) \
}; \
\
static struct uart_sedi_drv_data drv_data_##n; \
PM_DEVICE_DT_DEFINE(DT_NODELABEL(uart##n), \
uart_sedi_pm_action); \
DEVICE_DT_DEFINE(DT_NODELABEL(uart##n), \
&uart_sedi_init, \
PM_DEVICE_DT_GET(DT_NODELABEL(uart##n)), \
&drv_data_##n, &config_info_##n, \
PRE_KERNEL_1, \
CONFIG_SERIAL_INIT_PRIORITY, &api); \
UART_IRQ_HANDLER_DEFINE(n)
/* Convenient macro to get the controller instance. */
#define GET_CONTROLLER_INSTANCE(dev) \
(((const struct uart_sedi_config_info *) \
dev->config)->instance)
#define GET_MUTEX(dev) \
(((const struct uart_sedi_config_info *) \
dev->config)->mutex)
struct uart_sedi_config_info {
DEVICE_MMIO_ROM;
/* Specifies the uart instance for configuration. */
sedi_uart_t instance;
/* Specifies the baudrate for the uart instance. */
uint32_t baud_rate;
/* Specifies the port line control settings */
sedi_uart_lc_t line_ctrl;
struct k_mutex *mutex;
/* Enable / disable hardware flow control for UART. */
bool hw_fc;
/* UART irq configuration function when supporting interrupt
* mode.
*/
uart_irq_config_func_t uart_irq_config_func;
};
static int uart_sedi_init(const struct device *dev);
struct uart_sedi_drv_data {
DEVICE_MMIO_RAM;
uart_irq_callback_user_data_t user_cb;
void *unsol_rx_usr_cb_param;
uint32_t sync_rx_len;
uint32_t sync_rx_status;
void *user_data;
void *usr_rx_buff;
uint32_t usr_rx_size;
uint8_t iir_cache;
uint8_t busy_count;
};
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static void uart_busy_set(const struct device *dev)
{
struct uart_sedi_drv_data *context = dev->data;
context->busy_count++;
if (context->busy_count == 1) {
pm_device_busy_set(dev);
}
}
static void uart_busy_clear(const struct device *dev)
{
struct uart_sedi_drv_data *context = dev->data;
context->busy_count--;
if (context->busy_count == 0) {
pm_device_busy_clear(dev);
}
}
#endif
#ifdef CONFIG_PM_DEVICE
#ifndef CONFIG_UART_CONSOLE
static int uart_suspend_device(const struct device *dev)
{
const struct uart_sedi_config_info *config = dev->config;
if (pm_device_is_busy(dev)) {
return -EBUSY;
}
int ret = sedi_uart_set_power(config->instance, SEDI_POWER_SUSPEND);
if (ret != SEDI_DRIVER_OK) {
return -EIO;
}
return 0;
}
static int uart_resume_device_from_suspend(const struct device *dev)
{
const struct uart_sedi_config_info *config = dev->config;
int ret;
ret = sedi_uart_set_power(config->instance, SEDI_POWER_FULL);
if (ret != SEDI_DRIVER_OK) {
return -EIO;
}
return 0;
}
static int uart_sedi_pm_action(const struct device *dev,
enum pm_device_action action)
{
int ret = 0;
switch (action) {
case PM_DEVICE_ACTION_SUSPEND:
ret = uart_suspend_device(dev);
break;
case PM_DEVICE_ACTION_RESUME:
ret = uart_resume_device_from_suspend(dev);
break;
default:
ret = -ENOTSUP;
}
return ret;
}
#else
static int uart_sedi_pm_action(const struct device *dev,
enum pm_device_action action)
{
/* do nothing if using UART print log to avoid clock gating
* pm driver already handled power management for uart.
*/
return 0;
}
#endif /* CONFIG_UART_CONSOLE */
#endif /* CONFIG_PM_DEVICE */
static int uart_sedi_poll_in(const struct device *dev, unsigned char *data)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
uint32_t status;
int ret = 0;
sedi_uart_get_status(instance, (uint32_t *) &status);
/* In order to check if there is any data to read from UART
* controller we should check if the SEDI_UART_RX_BUSY bit from
* 'status' is not set. This bit is set only if there is any
* pending character to read.
*/
if (!(status & SEDI_UART_RX_BUSY)) {
ret = -1;
} else {
if (sedi_uart_read(instance, data, (uint32_t *)&status)) {
ret = -1;
}
}
return ret;
}
static void uart_sedi_poll_out(const struct device *dev,
unsigned char data)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_write(instance, data);
}
#ifdef CONFIG_UART_LINE_CTRL
static int get_xfer_error(int bsp_err)
{
int err;
switch (bsp_err) {
case SEDI_DRIVER_OK:
err = 0;
break;
case SEDI_USART_ERROR_CANCELED:
err = -ECANCELED;
break;
case SEDI_DRIVER_ERROR:
err = -EIO;
break;
case SEDI_DRIVER_ERROR_PARAMETER:
err = -EINVAL;
break;
case SEDI_DRIVER_ERROR_UNSUPPORTED:
err = -ENOTSUP;
break;
default:
err = -EFAULT;
}
return err;
}
#endif /* CONFIG_UART_LINE_CTRL */
static int uart_sedi_err_check(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
uint32_t status;
int ret_status = 0;
sedi_uart_get_status(instance, (uint32_t *const)&status);
if (status & SEDI_UART_RX_OE) {
ret_status = UART_ERROR_OVERRUN;
}
if (status & SEDI_UART_RX_PE) {
ret_status = UART_ERROR_PARITY;
}
if (status & SEDI_UART_RX_FE) {
ret_status = UART_ERROR_FRAMING;
}
if (status & SEDI_UART_RX_BI) {
ret_status = UART_BREAK;
}
return ret_status;
}
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static int uart_sedi_fifo_fill(const struct device *dev, const uint8_t *tx_data,
int size)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
return sedi_uart_fifo_fill(instance, tx_data, size);
}
static int uart_sedi_fifo_read(const struct device *dev, uint8_t *rx_data,
const int size)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
return sedi_uart_fifo_read(instance, rx_data, size);
}
static void uart_sedi_irq_tx_enable(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_irq_tx_enable(instance);
}
static void uart_sedi_irq_tx_disable(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_irq_tx_disable(instance);
}
static int uart_sedi_irq_tx_ready(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
return sedi_uart_irq_tx_ready(instance);
}
static int uart_sedi_irq_tx_complete(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
return sedi_uart_is_tx_complete(instance);
}
static void uart_sedi_irq_rx_enable(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
uart_busy_set(dev);
sedi_uart_irq_rx_enable(instance);
}
static void uart_sedi_irq_rx_disable(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_irq_rx_disable(instance);
uart_busy_clear(dev);
}
static int uart_sedi_irq_rx_ready(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
return sedi_uart_is_irq_rx_ready(instance);
}
static void uart_sedi_irq_err_enable(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_irq_err_enable(instance);
}
static void uart_sedi_irq_err_disable(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_irq_err_disable(instance);
}
static int uart_sedi_irq_is_pending(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
return sedi_uart_is_irq_pending(instance);
}
static int uart_sedi_irq_update(const struct device *dev)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_update_irq_cache(instance);
return 1;
}
static void uart_sedi_irq_callback_set(const struct device *dev,
uart_irq_callback_user_data_t cb,
void *user_data)
{
struct uart_sedi_drv_data *drv_data = dev->data;
drv_data->user_cb = cb;
drv_data->user_data = user_data;
}
static void uart_sedi_isr(void *arg)
{
struct device *dev = arg;
struct uart_sedi_drv_data *drv_data = dev->data;
if (drv_data->user_cb) {
drv_data->user_cb(dev, drv_data->user_data);
} else {
uart_sedi_cb(dev);
}
}
/* Called from generic callback of zephyr , set by set_cb. */
static void uart_sedi_cb(struct device *port)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(port);
sedi_uart_isr_handler(instance);
}
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
#ifdef CONFIG_UART_LINE_CTRL
static int uart_sedi_line_ctrl_set(struct device *dev,
uint32_t ctrl, uint32_t val)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_config_t cfg;
uint32_t mask;
int ret;
k_mutex_lock(GET_MUTEX(dev), K_FOREVER);
switch (ctrl) {
case UART_LINE_CTRL_BAUD_RATE:
sedi_uart_get_config(instance, &cfg);
cfg.baud_rate = val;
ret = sedi_uart_set_config(instance, &cfg);
break;
default:
ret = -ENODEV;
}
k_mutex_unlock(GET_MUTEX(dev));
ret = get_xfer_error(ret);
return ret;
}
static int uart_sedi_line_ctrl_get(struct device *dev,
uint32_t ctrl, uint32_t *val)
{
sedi_uart_t instance = GET_CONTROLLER_INSTANCE(dev);
sedi_uart_config_t cfg;
uint32_t mask;
int ret;
k_mutex_lock(GET_MUTEX(dev), K_FOREVER);
switch (ctrl) {
case UART_LINE_CTRL_BAUD_RATE:
ret = sedi_uart_get_config(instance, &cfg);
*val = cfg.baud_rate;
break;
case UART_LINE_CTRL_LOOPBACK:
ret = sedi_uart_get_loopback_mode(instance, (uint32_t *)val);
break;
case UART_LINE_CTRL_AFCE:
ret = sedi_uart_get_config(instance, &cfg);
*val = cfg.hw_fc;
break;
case UART_LINE_CTRL_LINE_STATUS_REPORT_MASK:
mask = 0;
*val = 0;
ret = sedi_get_ln_status_report_mask(instance,
(uint32_t *)&mask);
*val |= ((mask & SEDI_UART_RX_OE) ? UART_ERROR_OVERRUN : 0);
*val |= ((mask & SEDI_UART_RX_PE) ? UART_ERROR_PARITY : 0);
*val |= ((mask & SEDI_UART_RX_FE) ? UART_ERROR_FRAMING : 0);
*val |= ((mask & SEDI_UART_RX_BI) ? UART_BREAK : 0);
break;
case UART_LINE_CTRL_RTS:
ret = sedi_uart_read_rts(instance, (uint32_t *)val);
break;
case UART_LINE_CTRL_CTS:
ret = sedi_uart_read_cts(instance, (uint32_t *)val);
break;
default:
ret = -ENODEV;
}
k_mutex_unlock(GET_MUTEX(dev));
ret = get_xfer_error(ret);
return ret;
}
#endif /* CONFIG_UART_LINE_CTRL */
static const struct uart_driver_api api = {
.poll_in = uart_sedi_poll_in,
.poll_out = uart_sedi_poll_out,
.err_check = uart_sedi_err_check,
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
.fifo_fill = uart_sedi_fifo_fill,
.fifo_read = uart_sedi_fifo_read,
.irq_tx_enable = uart_sedi_irq_tx_enable,
.irq_tx_disable = uart_sedi_irq_tx_disable,
.irq_tx_ready = uart_sedi_irq_tx_ready,
.irq_tx_complete = uart_sedi_irq_tx_complete,
.irq_rx_enable = uart_sedi_irq_rx_enable,
.irq_rx_disable = uart_sedi_irq_rx_disable,
.irq_rx_ready = uart_sedi_irq_rx_ready,
.irq_err_enable = uart_sedi_irq_err_enable,
.irq_err_disable = uart_sedi_irq_err_disable,
.irq_is_pending = uart_sedi_irq_is_pending,
.irq_update = uart_sedi_irq_update,
.irq_callback_set = uart_sedi_irq_callback_set,
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
#ifdef CONFIG_UART_LINE_CTRL
.line_ctrl_set = uart_sedi_line_ctrl_set,
.line_ctrl_get = uart_sedi_line_ctrl_get,
#endif /* CONFIG_UART_LINE_CTRL */
};
static int uart_sedi_init(const struct device *dev)
{
const struct uart_sedi_config_info *config = dev->config;
sedi_uart_config_t cfg;
DEVICE_MMIO_MAP(dev, K_MEM_CACHE_NONE);
sedi_uart_init(config->instance, (void *)DEVICE_MMIO_GET(dev));
cfg.line_control = config->line_ctrl;
cfg.baud_rate = config->baud_rate;
cfg.hw_fc = config->hw_fc;
/* Setting to full power and enabling clk. */
sedi_uart_set_power(config->instance, SEDI_POWER_FULL);
sedi_uart_set_config(config->instance, &cfg);
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
config->uart_irq_config_func(dev);
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
return 0;
}
DT_INST_FOREACH_STATUS_OKAY(UART_SEDI_DEVICE_INIT)