drivers/wifi/infineon/airoc_whd_hal.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon company) or
  * an affiliate of Cypress Semiconductor Corporation
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #include <airoc_wifi.h>

 #include <bus_protocols/whd_bus_sdio_protocol.h>
 #include <bus_protocols/whd_bus.h>
 #include <bus_protocols/whd_sdio.h>
 #include <zephyr/sd/sd.h>

 #define DT_DRV_COMPAT infineon_airoc_wifi

 LOG_MODULE_REGISTER(infineon_airoc, CONFIG_WIFI_LOG_LEVEL);

 #ifdef __cplusplus
 extern "C" {
 #endif

 /** Defines the amount of stack memory available for the wifi thread. */
 #if !defined(CY_WIFI_THREAD_STACK_SIZE)
 #define CY_WIFI_THREAD_STACK_SIZE (5120)
 #endif

 /** Defines the priority of the thread that services wifi packets. Legal values are defined by the
  *  RTOS being used.
  */
 #if !defined(CY_WIFI_THREAD_PRIORITY)
 #define CY_WIFI_THREAD_PRIORITY (CY_RTOS_PRIORITY_HIGH)
 #endif

 /** Defines the country this will operate in for wifi initialization parameters. See the
  *  wifi-host-driver's whd_country_code_t for legal options.
  */
 #if !defined(CY_WIFI_COUNTRY)
 #define CY_WIFI_COUNTRY (WHD_COUNTRY_AUSTRALIA)
 #endif

 /** Defines the priority of the interrupt that handles out-of-band notifications from the wifi
  *  chip. Legal values are defined by the MCU running this code.
  */
 #if !defined(CY_WIFI_OOB_INTR_PRIORITY)
 #define CY_WIFI_OOB_INTR_PRIORITY (2)
 #endif

 /** Defines whether to use the out-of-band pin to allow the WIFI chip to wake up the MCU. */
 #if defined(CY_WIFI_HOST_WAKE_SW_FORCE)
 #define CY_USE_OOB_INTR (CY_WIFI_HOST_WAKE_SW_FORCE)
 #else
 #define CY_USE_OOB_INTR (1u)
 #endif /* defined(CY_WIFI_HOST_WAKE_SW_FORCE) */

 #define CY_WIFI_HOST_WAKE_IRQ_EVENT GPIO_INT_TRIG_LOW
 #define DEFAULT_OOB_PIN             (0)
 #define WLAN_POWER_UP_DELAY_MS      (250)
 #define WLAN_CBUCK_DISCHARGE_MS     (10)

 extern whd_resource_source_t resource_ops;

 struct whd_bus_priv {
 	whd_sdio_config_t sdio_config;
 	whd_bus_stats_t whd_bus_stats;
 	whd_sdio_t sdio_obj;
 };

 static whd_init_config_t init_config_default = {
 	.thread_stack_size = CY_WIFI_THREAD_STACK_SIZE,
 	.thread_stack_start = NULL,
 	.thread_priority = (uint32_t)CY_WIFI_THREAD_PRIORITY,
 	.country = CY_WIFI_COUNTRY
 };

 /******************************************************
  *                 Function
  ******************************************************/

 int airoc_wifi_power_on(const struct device *dev)
 {
 #if DT_INST_NODE_HAS_PROP(0, wifi_reg_on_gpios)
 	int ret;
 	const struct airoc_wifi_config *config = dev->config;

 	/* Check WIFI REG_ON gpio instance */
 	if (!device_is_ready(config->wifi_reg_on_gpio.port)) {
 		LOG_ERR("Error: failed to configure wifi_reg_on %s pin %d",
 			config->wifi_reg_on_gpio.port->name, config->wifi_reg_on_gpio.pin);
 		return -EIO;
 	}

 	/* Configure wifi_reg_on as output  */
 	ret = gpio_pin_configure_dt(&config->wifi_reg_on_gpio, GPIO_OUTPUT);
 	if (ret) {
 		LOG_ERR("Error %d: failed to configure wifi_reg_on %s pin %d", ret,
 			config->wifi_reg_on_gpio.port->name, config->wifi_reg_on_gpio.pin);
 		return ret;
 	}
 	ret = gpio_pin_set_dt(&config->wifi_reg_on_gpio, 0);
 	if (ret) {
 		return ret;
 	}

 	/* Allow CBUCK regulator to discharge */
 	(void)cyhal_system_delay_ms(WLAN_CBUCK_DISCHARGE_MS);

 	/* WIFI power on */
 	ret = gpio_pin_set_dt(&config->wifi_reg_on_gpio, 1);
 	if (ret) {
 		return ret;
 	}
 	(void)cyhal_system_delay_ms(WLAN_POWER_UP_DELAY_MS);
 #endif /* DT_INST_NODE_HAS_PROP(0, reg_on_gpios) */

 	return 0;
 }

 int airoc_wifi_init_primary(const struct device *dev, whd_interface_t *interface,
 			    whd_netif_funcs_t *netif_funcs, whd_buffer_funcs_t *buffer_if)
 {
 	int ret;
 	struct airoc_wifi_data *data = dev->data;
 	const struct airoc_wifi_config *config = dev->config;

 	whd_sdio_config_t whd_sdio_config = {
 		.sdio_1bit_mode = WHD_FALSE,
 		.high_speed_sdio_clock = WHD_FALSE,
 	};

 #if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
 	whd_oob_config_t oob_config = {
 		.host_oob_pin = (void *)&config->wifi_host_wake_gpio,
 		.dev_gpio_sel = DEFAULT_OOB_PIN,
 		.is_falling_edge =
 			(CY_WIFI_HOST_WAKE_IRQ_EVENT == GPIO_INT_TRIG_LOW) ? WHD_TRUE : WHD_FALSE,
 		.intr_priority = CY_WIFI_OOB_INTR_PRIORITY};
 	whd_sdio_config.oob_config = oob_config;
 #endif

 	if (airoc_wifi_power_on(dev)) {
 		LOG_ERR("airoc_wifi_power_on retuens fail");
 		return -ENODEV;
 	}

 	if (!device_is_ready(config->sdhc_dev)) {
 		LOG_ERR("SDHC device is not ready");
 		return -ENODEV;
 	}

 	ret = sd_init(config->sdhc_dev, &data->card);
 	if (ret) {
 		return ret;
 	}

 	/* Init SDIO functions */
 	ret = sdio_init_func(&data->card, &data->sdio_func1, BACKPLANE_FUNCTION);
 	if (ret) {
 		LOG_ERR("sdio_enable_func BACKPLANE_FUNCTION, error: %x", ret);
 		return ret;
 	}
 	ret = sdio_init_func(&data->card, &data->sdio_func2, WLAN_FUNCTION);
 	if (ret) {
 		LOG_ERR("sdio_enable_func WLAN_FUNCTION, error: %x", ret);
 		return ret;
 	}
 	ret = sdio_set_block_size(&data->sdio_func1, SDIO_64B_BLOCK);
 	if (ret) {
 		LOG_ERR("Can't set block size for BACKPLANE_FUNCTION, error: %x", ret);
 		return ret;
 	}
 	ret = sdio_set_block_size(&data->sdio_func2, SDIO_64B_BLOCK);
 	if (ret) {
 		LOG_ERR("Can't set block size for WLAN_FUNCTION, error: %x", ret);
 		return ret;
 	}

 	/* Init wifi host driver (whd) */
 	cy_rslt_t whd_ret = whd_init(&data->whd_drv, &init_config_default, &resource_ops, buffer_if,
 				     netif_funcs);
 	if (whd_ret == CY_RSLT_SUCCESS) {
 		whd_ret = whd_bus_sdio_attach(data->whd_drv, &whd_sdio_config,
 					      (whd_sdio_t)&data->card);

 		if (whd_ret == CY_RSLT_SUCCESS) {
 			whd_ret = whd_wifi_on(data->whd_drv, interface);
 		}

 		if (whd_ret != CY_RSLT_SUCCESS) {
 			whd_deinit(*interface);
 			return -ENODEV;
 		}
 	}
 	return 0;
 }

 /*
  * Implement SDIO CMD52/53 wrappers
  */

 static struct sdio_func *airoc_wifi_get_sdio_func(struct sd_card *sd, whd_bus_function_t function)
 {
 	struct airoc_wifi_data *data = CONTAINER_OF(sd, struct airoc_wifi_data, card);
 	struct sdio_func *func[] = {&sd->func0, &data->sdio_func1, &data->sdio_func2};

 	if (function > WLAN_FUNCTION) {
 		return NULL;
 	}

 	return func[function];
 }

 whd_result_t whd_bus_sdio_cmd52(whd_driver_t whd_driver, whd_bus_transfer_direction_t direction,
 				whd_bus_function_t function, uint32_t address, uint8_t value,
 				sdio_response_needed_t response_expected, uint8_t *response)
 {
 	int ret;
 	struct sd_card *sd = whd_driver->bus_priv->sdio_obj;
 	struct sdio_func *func = airoc_wifi_get_sdio_func(sd, function);

 	WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, cmd52);

 	if (direction == BUS_WRITE) {
 		ret = sdio_rw_byte(func, address, value, response);
 	} else {
 		ret = sdio_read_byte(func, address, response);
 	}
 	WHD_BUS_STATS_CONDITIONAL_INCREMENT_VARIABLE(whd_driver->bus_priv, (ret != WHD_SUCCESS),
 						     cmd52_fail);

 	/* Possibly device might not respond to this cmd. So, don't check return value here */
 	if ((ret != WHD_SUCCESS) && (address == SDIO_SLEEP_CSR)) {
 		return ret;
 	}

 	CHECK_RETURN(ret);
 	return WHD_SUCCESS;
 }

 whd_result_t whd_bus_sdio_cmd53(whd_driver_t whd_driver, whd_bus_transfer_direction_t direction,
 				whd_bus_function_t function, sdio_transfer_mode_t mode,
 				uint32_t address, uint16_t data_size, uint8_t *data,
 				sdio_response_needed_t response_expected, uint32_t *response)
 {
 	whd_result_t ret;
 	struct sd_card *sd = whd_driver->bus_priv->sdio_obj;
 	struct sdio_func *func = airoc_wifi_get_sdio_func(sd, function);

 	if (direction == BUS_WRITE) {
 		WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, cmd53_write);
 		ret = sdio_write_addr(func, address, data, data_size);
 	} else {
 		WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, cmd53_read);
 		ret = sdio_read_addr(func, address, data, data_size);
 	}

 	WHD_BUS_STATS_CONDITIONAL_INCREMENT_VARIABLE(
 		whd_driver->bus_priv, ((ret != WHD_SUCCESS) && (direction == BUS_READ)),
 		cmd53_read_fail);
 	WHD_BUS_STATS_CONDITIONAL_INCREMENT_VARIABLE(
 		whd_driver->bus_priv, ((ret != WHD_SUCCESS) && (direction == BUS_WRITE)),
 		cmd53_write_fail);

 	CHECK_RETURN(ret);
 	return WHD_SUCCESS;
 }

 /*
  * Implement SDIO Card interrupt
  */

 void whd_bus_sdio_irq_handler(const struct device *dev, int reason, const void *user_data)
 {
 	if (reason == SDHC_INT_SDIO) {
 		whd_driver_t whd_driver = (whd_driver_t)user_data;

 		WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, sdio_intrs);

 		/* call thread notify to wake up WHD thread */
 		whd_thread_notify_irq(whd_driver);
 	}
 }

 whd_result_t whd_bus_sdio_irq_register(whd_driver_t whd_driver)
 {
 	/* Nothing to do here, all handles by whd_bus_sdio_irq_enable function */
 	return WHD_SUCCESS;
 }

 whd_result_t whd_bus_sdio_irq_enable(whd_driver_t whd_driver, whd_bool_t enable)
 {
 	int ret;
 	struct sd_card *sd = whd_driver->bus_priv->sdio_obj;

 	/* Enable/disable SDIO Card interrupts */
 	if (enable) {
 		ret = sdhc_enable_interrupt(sd->sdhc, whd_bus_sdio_irq_handler, SDHC_INT_SDIO,
 					    whd_driver);
 	} else {
 		ret = sdhc_disable_interrupt(sd->sdhc, SDHC_INT_SDIO);
 	}
 	return ret;
 }

 /*
  * Implement OOB functionality
  */

 void whd_bus_sdio_oob_irq_handler(const struct device *port, struct gpio_callback *cb,
 				  gpio_port_pins_t pins)
 {
 #if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
 	struct airoc_wifi_data *data = CONTAINER_OF(cb, struct airoc_wifi_data, host_oob_pin_cb);

 	/* Get OOB pin info */
 	const whd_oob_config_t *oob_config = &data->whd_drv->bus_priv->sdio_config.oob_config;
 	const struct gpio_dt_spec *host_oob_pin = oob_config->host_oob_pin;

 	/* Check OOB state is correct */
 	int expected_event = (oob_config->is_falling_edge == WHD_TRUE) ? 0 : 1;

 	if (!(pins & BIT(host_oob_pin->pin)) || (gpio_pin_get_dt(host_oob_pin) != expected_event)) {
 		WPRINT_WHD_ERROR(("Unexpected interrupt event %d\n", expected_event));
 		WHD_BUS_STATS_INCREMENT_VARIABLE(data->whd_drv->bus_priv, error_intrs);
 		return;
 	}

 	WHD_BUS_STATS_INCREMENT_VARIABLE(data->whd_drv->bus_priv, oob_intrs);

 	/* Call thread notify to wake up WHD thread */
 	whd_thread_notify_irq(data->whd_drv);

 #endif /* DT_INST_NODE_HAS_PROP(0, wifi-host-wake-gpios) */
 }

 whd_result_t whd_bus_sdio_register_oob_intr(whd_driver_t whd_driver)
 {
 #if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
 	int ret;
 	const struct device *dev = DEVICE_DT_GET(DT_DRV_INST(0));
 	struct airoc_wifi_data *data = dev->data;

 	/* Get OOB pin info */
 	const whd_oob_config_t *oob_config = &whd_driver->bus_priv->sdio_config.oob_config;
 	const struct gpio_dt_spec *host_oob_pin = oob_config->host_oob_pin;

 	/* Check if OOB pin is ready */
 	if (!gpio_is_ready_dt(host_oob_pin)) {
 		WPRINT_WHD_ERROR(("%s: Failed at gpio_is_ready_dt for host_oob_pin\n", __func__));
 		return WHD_HAL_ERROR;
 	}

 	/* Configure OOB pin as output */
 	ret = gpio_pin_configure_dt(host_oob_pin, GPIO_INPUT);
 	if (ret != 0) {
 		WPRINT_WHD_ERROR((
 			" %s: Failed at gpio_pin_configure_dt for host_oob_pin, result code = %d\n",
 			__func__, ret));
 		return WHD_HAL_ERROR;
 	}

 	/* Initialize/add OOB pin callback */
 	gpio_init_callback(&data->host_oob_pin_cb, whd_bus_sdio_oob_irq_handler,
 			   BIT(host_oob_pin->pin));

 	ret = gpio_add_callback_dt(host_oob_pin, &data->host_oob_pin_cb);
 	if (ret != 0) {
 		WPRINT_WHD_ERROR(
 			("%s: Failed at gpio_add_callback_dt for host_oob_pin, result code = %d\n",
 			 __func__, ret));
 		return WHD_HAL_ERROR;
 	}
 #endif /* DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios) */

 	return WHD_SUCCESS;
 }

 whd_result_t whd_bus_sdio_unregister_oob_intr(whd_driver_t whd_driver)
 {
 #if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
 	int ret;
 	const whd_oob_config_t *oob_config = &whd_driver->bus_priv->sdio_config.oob_config;

 	/* Disable OOB pin interrupts */
 	ret = gpio_pin_interrupt_configure_dt(oob_config->host_oob_pin, GPIO_INT_DISABLE);
 	if (ret != 0) {
 		WPRINT_WHD_ERROR(("%s: Failed at gpio_pin_interrupt_configure_dt for host_oob_pin, "
 				  "result code = %d\n",
 				  __func__, ret));
 		return WHD_HAL_ERROR;
 	}
 #endif /* DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios) */
 	return WHD_SUCCESS;
 }

 whd_result_t whd_bus_sdio_enable_oob_intr(whd_driver_t whd_driver, whd_bool_t enable)
 {
 #if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
 	int ret;
 	const whd_oob_config_t *oob_config = &whd_driver->bus_priv->sdio_config.oob_config;
 	uint32_t trig_conf =
 		(oob_config->is_falling_edge == WHD_TRUE) ? GPIO_INT_TRIG_LOW : GPIO_INT_TRIG_HIGH;

 	/* Enable OOB pin interrupts */
 	ret = gpio_pin_interrupt_configure_dt(oob_config->host_oob_pin,
 					      GPIO_INT_ENABLE | GPIO_INT_EDGE | trig_conf);
 	if (ret != 0) {
 		WPRINT_WHD_ERROR(("%s: Failed at gpio_pin_interrupt_configure_dt for host_oob_pin, "
 				  "result code = %d\n",
 				  __func__, ret));
 		return WHD_HAL_ERROR;
 	}
 #endif /* DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios) */
 	return WHD_SUCCESS;
 }

 /*
  * Implement WHD memory wrappers
  */

 void *whd_mem_malloc(size_t size)
 {
 	return k_malloc(size);
 }

 void *whd_mem_calloc(size_t nitems, size_t size)
 {
 	return k_calloc(nitems, size);
 }

 void whd_mem_free(void *ptr)
 {
 	k_free(ptr);
 }

 #ifdef __cplusplus
 } /* extern "C" */
 #endif
	/*
	* Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon company) or
	* an affiliate of Cypress Semiconductor Corporation
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#include <airoc_wifi.h>

	#include <bus_protocols/whd_bus_sdio_protocol.h>
	#include <bus_protocols/whd_bus.h>
	#include <bus_protocols/whd_sdio.h>
	#include <zephyr/sd/sd.h>

	#define DT_DRV_COMPAT infineon_airoc_wifi

	LOG_MODULE_REGISTER(infineon_airoc, CONFIG_WIFI_LOG_LEVEL);

	#ifdef __cplusplus
	extern "C" {
	#endif

	/** Defines the amount of stack memory available for the wifi thread. */
	#if !defined(CY_WIFI_THREAD_STACK_SIZE)
	#define CY_WIFI_THREAD_STACK_SIZE (5120)
	#endif

	/** Defines the priority of the thread that services wifi packets. Legal values are defined by the
	* RTOS being used.
	*/
	#if !defined(CY_WIFI_THREAD_PRIORITY)
	#define CY_WIFI_THREAD_PRIORITY (CY_RTOS_PRIORITY_HIGH)
	#endif

	/** Defines the country this will operate in for wifi initialization parameters. See the
	* wifi-host-driver's whd_country_code_t for legal options.
	*/
	#if !defined(CY_WIFI_COUNTRY)
	#define CY_WIFI_COUNTRY (WHD_COUNTRY_AUSTRALIA)
	#endif

	/** Defines the priority of the interrupt that handles out-of-band notifications from the wifi
	* chip. Legal values are defined by the MCU running this code.
	*/
	#if !defined(CY_WIFI_OOB_INTR_PRIORITY)
	#define CY_WIFI_OOB_INTR_PRIORITY (2)
	#endif

	/** Defines whether to use the out-of-band pin to allow the WIFI chip to wake up the MCU. */
	#if defined(CY_WIFI_HOST_WAKE_SW_FORCE)
	#define CY_USE_OOB_INTR (CY_WIFI_HOST_WAKE_SW_FORCE)
	#else
	#define CY_USE_OOB_INTR (1u)
	#endif /* defined(CY_WIFI_HOST_WAKE_SW_FORCE) */

	#define CY_WIFI_HOST_WAKE_IRQ_EVENT GPIO_INT_TRIG_LOW
	#define DEFAULT_OOB_PIN (0)
	#define WLAN_POWER_UP_DELAY_MS (250)
	#define WLAN_CBUCK_DISCHARGE_MS (10)

	extern whd_resource_source_t resource_ops;

	struct whd_bus_priv {
	whd_sdio_config_t sdio_config;
	whd_bus_stats_t whd_bus_stats;
	whd_sdio_t sdio_obj;
	};

	static whd_init_config_t init_config_default = {
	.thread_stack_size = CY_WIFI_THREAD_STACK_SIZE,
	.thread_stack_start = NULL,
	.thread_priority = (uint32_t)CY_WIFI_THREAD_PRIORITY,
	.country = CY_WIFI_COUNTRY
	};

	/******************************************************
	* Function
	******************************************************/

	int airoc_wifi_power_on(const struct device *dev)
	{
	#if DT_INST_NODE_HAS_PROP(0, wifi_reg_on_gpios)
	int ret;
	const struct airoc_wifi_config *config = dev->config;

	/* Check WIFI REG_ON gpio instance */
	if (!device_is_ready(config->wifi_reg_on_gpio.port)) {
	LOG_ERR("Error: failed to configure wifi_reg_on %s pin %d",
	config->wifi_reg_on_gpio.port->name, config->wifi_reg_on_gpio.pin);
	return -EIO;
	}

	/* Configure wifi_reg_on as output */
	ret = gpio_pin_configure_dt(&config->wifi_reg_on_gpio, GPIO_OUTPUT);
	if (ret) {
	LOG_ERR("Error %d: failed to configure wifi_reg_on %s pin %d", ret,
	config->wifi_reg_on_gpio.port->name, config->wifi_reg_on_gpio.pin);
	return ret;
	}
	ret = gpio_pin_set_dt(&config->wifi_reg_on_gpio, 0);
	if (ret) {
	return ret;
	}

	/* Allow CBUCK regulator to discharge */
	(void)cyhal_system_delay_ms(WLAN_CBUCK_DISCHARGE_MS);

	/* WIFI power on */
	ret = gpio_pin_set_dt(&config->wifi_reg_on_gpio, 1);
	if (ret) {
	return ret;
	}
	(void)cyhal_system_delay_ms(WLAN_POWER_UP_DELAY_MS);
	#endif /* DT_INST_NODE_HAS_PROP(0, reg_on_gpios) */

	return 0;
	}

	int airoc_wifi_init_primary(const struct device dev, whd_interface_t interface,
	whd_netif_funcs_t netif_funcs, whd_buffer_funcs_t buffer_if)
	{
	int ret;
	struct airoc_wifi_data *data = dev->data;
	const struct airoc_wifi_config *config = dev->config;

	whd_sdio_config_t whd_sdio_config = {
	.sdio_1bit_mode = WHD_FALSE,
	.high_speed_sdio_clock = WHD_FALSE,
	};

	#if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
	whd_oob_config_t oob_config = {
	.host_oob_pin = (void *)&config->wifi_host_wake_gpio,
	.dev_gpio_sel = DEFAULT_OOB_PIN,
	.is_falling_edge =
	(CY_WIFI_HOST_WAKE_IRQ_EVENT == GPIO_INT_TRIG_LOW) ? WHD_TRUE : WHD_FALSE,
	.intr_priority = CY_WIFI_OOB_INTR_PRIORITY};
	whd_sdio_config.oob_config = oob_config;
	#endif

	if (airoc_wifi_power_on(dev)) {
	LOG_ERR("airoc_wifi_power_on retuens fail");
	return -ENODEV;
	}

	if (!device_is_ready(config->sdhc_dev)) {
	LOG_ERR("SDHC device is not ready");
	return -ENODEV;
	}

	ret = sd_init(config->sdhc_dev, &data->card);
	if (ret) {
	return ret;
	}

	/* Init SDIO functions */
	ret = sdio_init_func(&data->card, &data->sdio_func1, BACKPLANE_FUNCTION);
	if (ret) {
	LOG_ERR("sdio_enable_func BACKPLANE_FUNCTION, error: %x", ret);
	return ret;
	}
	ret = sdio_init_func(&data->card, &data->sdio_func2, WLAN_FUNCTION);
	if (ret) {
	LOG_ERR("sdio_enable_func WLAN_FUNCTION, error: %x", ret);
	return ret;
	}
	ret = sdio_set_block_size(&data->sdio_func1, SDIO_64B_BLOCK);
	if (ret) {
	LOG_ERR("Can't set block size for BACKPLANE_FUNCTION, error: %x", ret);
	return ret;
	}
	ret = sdio_set_block_size(&data->sdio_func2, SDIO_64B_BLOCK);
	if (ret) {
	LOG_ERR("Can't set block size for WLAN_FUNCTION, error: %x", ret);
	return ret;
	}

	/* Init wifi host driver (whd) */
	cy_rslt_t whd_ret = whd_init(&data->whd_drv, &init_config_default, &resource_ops, buffer_if,
	netif_funcs);
	if (whd_ret == CY_RSLT_SUCCESS) {
	whd_ret = whd_bus_sdio_attach(data->whd_drv, &whd_sdio_config,
	(whd_sdio_t)&data->card);

	if (whd_ret == CY_RSLT_SUCCESS) {
	whd_ret = whd_wifi_on(data->whd_drv, interface);
	}

	if (whd_ret != CY_RSLT_SUCCESS) {
	whd_deinit(*interface);
	return -ENODEV;
	}
	}
	return 0;
	}

	/*
	* Implement SDIO CMD52/53 wrappers
	*/

	static struct sdio_func airoc_wifi_get_sdio_func(struct sd_card sd, whd_bus_function_t function)
	{
	struct airoc_wifi_data *data = CONTAINER_OF(sd, struct airoc_wifi_data, card);
	struct sdio_func *func[] = {&sd->func0, &data->sdio_func1, &data->sdio_func2};

	if (function > WLAN_FUNCTION) {
	return NULL;
	}

	return func[function];
	}

	whd_result_t whd_bus_sdio_cmd52(whd_driver_t whd_driver, whd_bus_transfer_direction_t direction,
	whd_bus_function_t function, uint32_t address, uint8_t value,
	sdio_response_needed_t response_expected, uint8_t *response)
	{
	int ret;
	struct sd_card *sd = whd_driver->bus_priv->sdio_obj;
	struct sdio_func *func = airoc_wifi_get_sdio_func(sd, function);

	WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, cmd52);

	if (direction == BUS_WRITE) {
	ret = sdio_rw_byte(func, address, value, response);
	} else {
	ret = sdio_read_byte(func, address, response);
	}
	WHD_BUS_STATS_CONDITIONAL_INCREMENT_VARIABLE(whd_driver->bus_priv, (ret != WHD_SUCCESS),
	cmd52_fail);

	/* Possibly device might not respond to this cmd. So, don't check return value here */
	if ((ret != WHD_SUCCESS) && (address == SDIO_SLEEP_CSR)) {
	return ret;
	}

	CHECK_RETURN(ret);
	return WHD_SUCCESS;
	}

	whd_result_t whd_bus_sdio_cmd53(whd_driver_t whd_driver, whd_bus_transfer_direction_t direction,
	whd_bus_function_t function, sdio_transfer_mode_t mode,
	uint32_t address, uint16_t data_size, uint8_t *data,
	sdio_response_needed_t response_expected, uint32_t *response)
	{
	whd_result_t ret;
	struct sd_card *sd = whd_driver->bus_priv->sdio_obj;
	struct sdio_func *func = airoc_wifi_get_sdio_func(sd, function);

	if (direction == BUS_WRITE) {
	WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, cmd53_write);
	ret = sdio_write_addr(func, address, data, data_size);
	} else {
	WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, cmd53_read);
	ret = sdio_read_addr(func, address, data, data_size);
	}

	WHD_BUS_STATS_CONDITIONAL_INCREMENT_VARIABLE(
	whd_driver->bus_priv, ((ret != WHD_SUCCESS) && (direction == BUS_READ)),
	cmd53_read_fail);
	WHD_BUS_STATS_CONDITIONAL_INCREMENT_VARIABLE(
	whd_driver->bus_priv, ((ret != WHD_SUCCESS) && (direction == BUS_WRITE)),
	cmd53_write_fail);

	CHECK_RETURN(ret);
	return WHD_SUCCESS;
	}

	/*
	* Implement SDIO Card interrupt
	*/

	void whd_bus_sdio_irq_handler(const struct device dev, int reason, const void user_data)
	{
	if (reason == SDHC_INT_SDIO) {
	whd_driver_t whd_driver = (whd_driver_t)user_data;

	WHD_BUS_STATS_INCREMENT_VARIABLE(whd_driver->bus_priv, sdio_intrs);

	/* call thread notify to wake up WHD thread */
	whd_thread_notify_irq(whd_driver);
	}
	}

	whd_result_t whd_bus_sdio_irq_register(whd_driver_t whd_driver)
	{
	/* Nothing to do here, all handles by whd_bus_sdio_irq_enable function */
	return WHD_SUCCESS;
	}

	whd_result_t whd_bus_sdio_irq_enable(whd_driver_t whd_driver, whd_bool_t enable)
	{
	int ret;
	struct sd_card *sd = whd_driver->bus_priv->sdio_obj;

	/* Enable/disable SDIO Card interrupts */
	if (enable) {
	ret = sdhc_enable_interrupt(sd->sdhc, whd_bus_sdio_irq_handler, SDHC_INT_SDIO,
	whd_driver);
	} else {
	ret = sdhc_disable_interrupt(sd->sdhc, SDHC_INT_SDIO);
	}
	return ret;
	}

	/*
	* Implement OOB functionality
	*/

	void whd_bus_sdio_oob_irq_handler(const struct device port, struct gpio_callback cb,
	gpio_port_pins_t pins)
	{
	#if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
	struct airoc_wifi_data *data = CONTAINER_OF(cb, struct airoc_wifi_data, host_oob_pin_cb);

	/* Get OOB pin info */
	const whd_oob_config_t *oob_config = &data->whd_drv->bus_priv->sdio_config.oob_config;
	const struct gpio_dt_spec *host_oob_pin = oob_config->host_oob_pin;

	/* Check OOB state is correct */
	int expected_event = (oob_config->is_falling_edge == WHD_TRUE) ? 0 : 1;

	if (!(pins & BIT(host_oob_pin->pin)) \|\| (gpio_pin_get_dt(host_oob_pin) != expected_event)) {
	WPRINT_WHD_ERROR(("Unexpected interrupt event %d\n", expected_event));
	WHD_BUS_STATS_INCREMENT_VARIABLE(data->whd_drv->bus_priv, error_intrs);
	return;
	}

	WHD_BUS_STATS_INCREMENT_VARIABLE(data->whd_drv->bus_priv, oob_intrs);

	/* Call thread notify to wake up WHD thread */
	whd_thread_notify_irq(data->whd_drv);

	#endif /* DT_INST_NODE_HAS_PROP(0, wifi-host-wake-gpios) */
	}

	whd_result_t whd_bus_sdio_register_oob_intr(whd_driver_t whd_driver)
	{
	#if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
	int ret;
	const struct device *dev = DEVICE_DT_GET(DT_DRV_INST(0));
	struct airoc_wifi_data *data = dev->data;

	/* Get OOB pin info */
	const whd_oob_config_t *oob_config = &whd_driver->bus_priv->sdio_config.oob_config;
	const struct gpio_dt_spec *host_oob_pin = oob_config->host_oob_pin;

	/* Check if OOB pin is ready */
	if (!gpio_is_ready_dt(host_oob_pin)) {
	WPRINT_WHD_ERROR(("%s: Failed at gpio_is_ready_dt for host_oob_pin\n", __func__));
	return WHD_HAL_ERROR;
	}

	/* Configure OOB pin as output */
	ret = gpio_pin_configure_dt(host_oob_pin, GPIO_INPUT);
	if (ret != 0) {
	WPRINT_WHD_ERROR((
	" %s: Failed at gpio_pin_configure_dt for host_oob_pin, result code = %d\n",
	__func__, ret));
	return WHD_HAL_ERROR;
	}

	/* Initialize/add OOB pin callback */
	gpio_init_callback(&data->host_oob_pin_cb, whd_bus_sdio_oob_irq_handler,
	BIT(host_oob_pin->pin));

	ret = gpio_add_callback_dt(host_oob_pin, &data->host_oob_pin_cb);
	if (ret != 0) {
	WPRINT_WHD_ERROR(
	("%s: Failed at gpio_add_callback_dt for host_oob_pin, result code = %d\n",
	__func__, ret));
	return WHD_HAL_ERROR;
	}
	#endif /* DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios) */

	return WHD_SUCCESS;
	}

	whd_result_t whd_bus_sdio_unregister_oob_intr(whd_driver_t whd_driver)
	{
	#if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
	int ret;
	const whd_oob_config_t *oob_config = &whd_driver->bus_priv->sdio_config.oob_config;

	/* Disable OOB pin interrupts */
	ret = gpio_pin_interrupt_configure_dt(oob_config->host_oob_pin, GPIO_INT_DISABLE);
	if (ret != 0) {
	WPRINT_WHD_ERROR(("%s: Failed at gpio_pin_interrupt_configure_dt for host_oob_pin, "
	"result code = %d\n",
	__func__, ret));
	return WHD_HAL_ERROR;
	}
	#endif /* DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios) */
	return WHD_SUCCESS;
	}

	whd_result_t whd_bus_sdio_enable_oob_intr(whd_driver_t whd_driver, whd_bool_t enable)
	{
	#if DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios)
	int ret;
	const whd_oob_config_t *oob_config = &whd_driver->bus_priv->sdio_config.oob_config;
	uint32_t trig_conf =
	(oob_config->is_falling_edge == WHD_TRUE) ? GPIO_INT_TRIG_LOW : GPIO_INT_TRIG_HIGH;

	/* Enable OOB pin interrupts */
	ret = gpio_pin_interrupt_configure_dt(oob_config->host_oob_pin,
	GPIO_INT_ENABLE \| GPIO_INT_EDGE \| trig_conf);
	if (ret != 0) {
	WPRINT_WHD_ERROR(("%s: Failed at gpio_pin_interrupt_configure_dt for host_oob_pin, "
	"result code = %d\n",
	__func__, ret));
	return WHD_HAL_ERROR;
	}
	#endif /* DT_INST_NODE_HAS_PROP(0, wifi_host_wake_gpios) */
	return WHD_SUCCESS;
	}

	/*
	* Implement WHD memory wrappers
	*/

	void *whd_mem_malloc(size_t size)
	{
	return k_malloc(size);
	}

	void *whd_mem_calloc(size_t nitems, size_t size)
	{
	return k_calloc(nitems, size);
	}

	void whd_mem_free(void *ptr)
	{
	k_free(ptr);
	}

	#ifdef __cplusplus
	} /* extern "C" */
	#endif