| .. zephyr:board:: candlelight |
| |
| Overview |
| ******** |
| |
| The candleLight is an open-hardware USB to CAN 2.0B adapter board available from a number of |
| sources. |
| |
| Hardware |
| ******** |
| |
| The candleLight board is equipped with a STM32F072CB microcontroller and features an USB connector, |
| a DB-9M connector for the CAN bus, and two user LEDs. Schematics and component placement drawings |
| are available in the `candleLight GitHub repository`_. |
| |
| Supported Features |
| ================== |
| |
| .. zephyr:board-supported-hw:: |
| |
| System Clock |
| ============ |
| |
| The STM32F072CB PLL is driven by the internal RC oscillator (HSI) running at 8 MHz and |
| configured to provide a system clock of 48 MHz. |
| |
| Programming and Debugging |
| ************************* |
| |
| .. zephyr:board-supported-runners:: |
| |
| Build and flash applications as usual (see :ref:`build_an_application` and |
| :ref:`application_run` for more details). |
| |
| If flashing via USB DFU, short resistor ``R203`` when applying power to the candleLight in order to |
| enter the built-in DFU mode. |
| |
| Here is an example for the :zephyr:code-sample:`blinky` application. |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/basic/blinky |
| :board: candlelight |
| :goals: flash |
| |
| .. _candleLight GitHub repository: |
| https://github.com/HubertD/candleLight |
