| /* |
| * Copyright (c) 2021 BrainCo Inc. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT gd_gd32_spi |
| |
| #include <errno.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/drivers/clock_control.h> |
| #include <zephyr/drivers/clock_control/gd32.h> |
| #include <zephyr/drivers/pinctrl.h> |
| #include <zephyr/drivers/reset.h> |
| #include <zephyr/drivers/spi.h> |
| #ifdef CONFIG_SPI_GD32_DMA |
| #include <zephyr/drivers/dma.h> |
| #include <zephyr/drivers/dma/dma_gd32.h> |
| #endif |
| |
| #include <gd32_spi.h> |
| |
| #include <zephyr/logging/log.h> |
| #include <zephyr/irq.h> |
| LOG_MODULE_REGISTER(spi_gd32); |
| |
| #include "spi_context.h" |
| |
| /* SPI error status mask. */ |
| #define SPI_GD32_ERR_MASK (SPI_STAT_RXORERR | SPI_STAT_CONFERR | SPI_STAT_CRCERR) |
| |
| #define GD32_SPI_PSC_MAX 0x7U |
| |
| #ifdef CONFIG_SPI_GD32_DMA |
| |
| enum spi_gd32_dma_direction { |
| RX = 0, |
| TX, |
| NUM_OF_DIRECTION |
| }; |
| |
| struct spi_gd32_dma_config { |
| const struct device *dev; |
| uint32_t channel; |
| uint32_t config; |
| uint32_t slot; |
| uint32_t fifo_threshold; |
| }; |
| |
| struct spi_gd32_dma_data { |
| struct dma_config config; |
| struct dma_block_config block; |
| uint32_t count; |
| }; |
| |
| #endif |
| |
| struct spi_gd32_config { |
| uint32_t reg; |
| uint16_t clkid; |
| struct reset_dt_spec reset; |
| const struct pinctrl_dev_config *pcfg; |
| #ifdef CONFIG_SPI_GD32_DMA |
| const struct spi_gd32_dma_config dma[NUM_OF_DIRECTION]; |
| #endif |
| #ifdef CONFIG_SPI_GD32_INTERRUPT |
| void (*irq_configure)(); |
| #endif |
| }; |
| |
| struct spi_gd32_data { |
| struct spi_context ctx; |
| #ifdef CONFIG_SPI_GD32_DMA |
| struct spi_gd32_dma_data dma[NUM_OF_DIRECTION]; |
| #endif |
| }; |
| |
| #ifdef CONFIG_SPI_GD32_DMA |
| |
| static uint32_t dummy_tx; |
| static uint32_t dummy_rx; |
| |
| static bool spi_gd32_dma_enabled(const struct device *dev) |
| { |
| const struct spi_gd32_config *cfg = dev->config; |
| |
| if (cfg->dma[TX].dev && cfg->dma[RX].dev) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static size_t spi_gd32_dma_enabled_num(const struct device *dev) |
| { |
| return spi_gd32_dma_enabled(dev) ? 2 : 0; |
| } |
| |
| #endif |
| |
| static int spi_gd32_get_err(const struct spi_gd32_config *cfg) |
| { |
| uint32_t stat = SPI_STAT(cfg->reg); |
| |
| if (stat & SPI_GD32_ERR_MASK) { |
| LOG_ERR("spi%u error status detected, err = %u", |
| cfg->reg, stat & (uint32_t)SPI_GD32_ERR_MASK); |
| |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static bool spi_gd32_transfer_ongoing(struct spi_gd32_data *data) |
| { |
| return spi_context_tx_on(&data->ctx) || |
| spi_context_rx_on(&data->ctx); |
| } |
| |
| static int spi_gd32_configure(const struct device *dev, |
| const struct spi_config *config) |
| { |
| struct spi_gd32_data *data = dev->data; |
| const struct spi_gd32_config *cfg = dev->config; |
| uint32_t bus_freq; |
| |
| if (spi_context_configured(&data->ctx, config)) { |
| return 0; |
| } |
| |
| if (SPI_OP_MODE_GET(config->operation) == SPI_OP_MODE_SLAVE) { |
| LOG_ERR("Slave mode not supported"); |
| return -ENOTSUP; |
| } |
| |
| SPI_CTL0(cfg->reg) &= ~SPI_CTL0_SPIEN; |
| |
| SPI_CTL0(cfg->reg) |= SPI_MASTER; |
| SPI_CTL0(cfg->reg) &= ~SPI_TRANSMODE_BDTRANSMIT; |
| |
| if (SPI_WORD_SIZE_GET(config->operation) == 8) { |
| SPI_CTL0(cfg->reg) |= SPI_FRAMESIZE_8BIT; |
| } else { |
| SPI_CTL0(cfg->reg) |= SPI_FRAMESIZE_16BIT; |
| } |
| |
| /* Reset to hardware NSS mode. */ |
| SPI_CTL0(cfg->reg) &= ~SPI_CTL0_SWNSSEN; |
| if (config->cs != NULL) { |
| SPI_CTL0(cfg->reg) |= SPI_CTL0_SWNSSEN; |
| } else { |
| /* |
| * For single master env, |
| * hardware NSS mode also need to set the NSSDRV bit. |
| */ |
| SPI_CTL1(cfg->reg) |= SPI_CTL1_NSSDRV; |
| } |
| |
| SPI_CTL0(cfg->reg) &= ~SPI_CTL0_LF; |
| if (config->operation & SPI_TRANSFER_LSB) { |
| SPI_CTL0(cfg->reg) |= SPI_CTL0_LF; |
| } |
| |
| SPI_CTL0(cfg->reg) &= ~SPI_CTL0_CKPL; |
| if (config->operation & SPI_MODE_CPOL) { |
| SPI_CTL0(cfg->reg) |= SPI_CTL0_CKPL; |
| } |
| |
| SPI_CTL0(cfg->reg) &= ~SPI_CTL0_CKPH; |
| if (config->operation & SPI_MODE_CPHA) { |
| SPI_CTL0(cfg->reg) |= SPI_CTL0_CKPH; |
| } |
| |
| (void)clock_control_get_rate(GD32_CLOCK_CONTROLLER, |
| (clock_control_subsys_t *)&cfg->clkid, |
| &bus_freq); |
| |
| for (uint8_t i = 0U; i <= GD32_SPI_PSC_MAX; i++) { |
| bus_freq = bus_freq >> 1U; |
| if (bus_freq <= config->frequency) { |
| SPI_CTL0(cfg->reg) &= ~SPI_CTL0_PSC; |
| SPI_CTL0(cfg->reg) |= CTL0_PSC(i); |
| break; |
| } |
| } |
| |
| data->ctx.config = config; |
| |
| return 0; |
| } |
| |
| static int spi_gd32_frame_exchange(const struct device *dev) |
| { |
| struct spi_gd32_data *data = dev->data; |
| const struct spi_gd32_config *cfg = dev->config; |
| struct spi_context *ctx = &data->ctx; |
| uint16_t tx_frame = 0U, rx_frame = 0U; |
| |
| while ((SPI_STAT(cfg->reg) & SPI_STAT_TBE) == 0) { |
| /* NOP */ |
| } |
| |
| if (SPI_WORD_SIZE_GET(ctx->config->operation) == 8) { |
| if (spi_context_tx_buf_on(ctx)) { |
| tx_frame = UNALIGNED_GET((uint8_t *)(data->ctx.tx_buf)); |
| } |
| /* For 8 bits mode, spi will forced SPI_DATA[15:8] to 0. */ |
| SPI_DATA(cfg->reg) = tx_frame; |
| |
| spi_context_update_tx(ctx, 1, 1); |
| } else { |
| if (spi_context_tx_buf_on(ctx)) { |
| tx_frame = UNALIGNED_GET((uint8_t *)(data->ctx.tx_buf)); |
| } |
| SPI_DATA(cfg->reg) = tx_frame; |
| |
| spi_context_update_tx(ctx, 2, 1); |
| } |
| |
| while ((SPI_STAT(cfg->reg) & SPI_STAT_RBNE) == 0) { |
| /* NOP */ |
| } |
| |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| /* For 8 bits mode, spi will forced SPI_DATA[15:8] to 0. */ |
| rx_frame = SPI_DATA(cfg->reg); |
| if (spi_context_rx_buf_on(ctx)) { |
| UNALIGNED_PUT(rx_frame, (uint8_t *)data->ctx.rx_buf); |
| } |
| |
| spi_context_update_rx(ctx, 1, 1); |
| } else { |
| rx_frame = SPI_DATA(cfg->reg); |
| if (spi_context_rx_buf_on(ctx)) { |
| UNALIGNED_PUT(rx_frame, (uint16_t *)data->ctx.rx_buf); |
| } |
| |
| spi_context_update_rx(ctx, 2, 1); |
| } |
| |
| return spi_gd32_get_err(cfg); |
| } |
| |
| #ifdef CONFIG_SPI_GD32_DMA |
| static void spi_gd32_dma_callback(const struct device *dma_dev, void *arg, |
| uint32_t channel, int status); |
| |
| static uint32_t spi_gd32_dma_setup(const struct device *dev, const uint32_t dir) |
| { |
| const struct spi_gd32_config *cfg = dev->config; |
| struct spi_gd32_data *data = dev->data; |
| struct dma_config *dma_cfg = &data->dma[dir].config; |
| struct dma_block_config *block_cfg = &data->dma[dir].block; |
| const struct spi_gd32_dma_config *dma = &cfg->dma[dir]; |
| int ret; |
| |
| memset(dma_cfg, 0, sizeof(struct dma_config)); |
| memset(block_cfg, 0, sizeof(struct dma_block_config)); |
| |
| dma_cfg->source_burst_length = 1; |
| dma_cfg->dest_burst_length = 1; |
| dma_cfg->user_data = (void *)dev; |
| dma_cfg->dma_callback = spi_gd32_dma_callback; |
| dma_cfg->block_count = 1U; |
| dma_cfg->head_block = block_cfg; |
| dma_cfg->dma_slot = cfg->dma[dir].slot; |
| dma_cfg->channel_priority = |
| GD32_DMA_CONFIG_PRIORITY(cfg->dma[dir].config); |
| dma_cfg->channel_direction = |
| dir == TX ? MEMORY_TO_PERIPHERAL : PERIPHERAL_TO_MEMORY; |
| |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| dma_cfg->source_data_size = 1; |
| dma_cfg->dest_data_size = 1; |
| } else { |
| dma_cfg->source_data_size = 2; |
| dma_cfg->dest_data_size = 2; |
| } |
| |
| block_cfg->block_size = spi_context_max_continuous_chunk(&data->ctx); |
| |
| if (dir == TX) { |
| block_cfg->dest_address = (uint32_t)&SPI_DATA(cfg->reg); |
| block_cfg->dest_addr_adj = DMA_ADDR_ADJ_NO_CHANGE; |
| if (spi_context_tx_buf_on(&data->ctx)) { |
| block_cfg->source_address = (uint32_t)data->ctx.tx_buf; |
| block_cfg->source_addr_adj = DMA_ADDR_ADJ_INCREMENT; |
| } else { |
| block_cfg->source_address = (uint32_t)&dummy_tx; |
| block_cfg->source_addr_adj = DMA_ADDR_ADJ_NO_CHANGE; |
| } |
| } |
| |
| if (dir == RX) { |
| block_cfg->source_address = (uint32_t)&SPI_DATA(cfg->reg); |
| block_cfg->source_addr_adj = DMA_ADDR_ADJ_NO_CHANGE; |
| |
| if (spi_context_rx_buf_on(&data->ctx)) { |
| block_cfg->dest_address = (uint32_t)data->ctx.rx_buf; |
| block_cfg->dest_addr_adj = DMA_ADDR_ADJ_INCREMENT; |
| } else { |
| block_cfg->dest_address = (uint32_t)&dummy_rx; |
| block_cfg->dest_addr_adj = DMA_ADDR_ADJ_NO_CHANGE; |
| } |
| } |
| |
| ret = dma_config(dma->dev, dma->channel, dma_cfg); |
| if (ret < 0) { |
| LOG_ERR("dma_config %p failed %d\n", dma->dev, ret); |
| return ret; |
| } |
| |
| ret = dma_start(dma->dev, dma->channel); |
| if (ret < 0) { |
| LOG_ERR("dma_start %p failed %d\n", dma->dev, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int spi_gd32_start_dma_transceive(const struct device *dev) |
| { |
| const struct spi_gd32_config *cfg = dev->config; |
| struct spi_gd32_data *data = dev->data; |
| const size_t chunk_len = spi_context_max_continuous_chunk(&data->ctx); |
| struct dma_status stat; |
| int ret = 0; |
| |
| for (size_t i = 0; i < spi_gd32_dma_enabled_num(dev); i++) { |
| dma_get_status(cfg->dma[i].dev, cfg->dma[i].channel, &stat); |
| if ((chunk_len != data->dma[i].count) && !stat.busy) { |
| ret = spi_gd32_dma_setup(dev, i); |
| if (ret < 0) { |
| goto on_error; |
| } |
| } |
| } |
| |
| SPI_CTL1(cfg->reg) |= (SPI_CTL1_DMATEN | SPI_CTL1_DMAREN); |
| |
| on_error: |
| if (ret < 0) { |
| for (size_t i = 0; i < spi_gd32_dma_enabled_num(dev); i++) { |
| dma_stop(cfg->dma[i].dev, cfg->dma[i].channel); |
| } |
| } |
| return ret; |
| } |
| #endif |
| |
| static int spi_gd32_transceive_impl(const struct device *dev, |
| const struct spi_config *config, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| spi_callback_t cb, |
| void *userdata) |
| { |
| struct spi_gd32_data *data = dev->data; |
| const struct spi_gd32_config *cfg = dev->config; |
| int ret; |
| |
| spi_context_lock(&data->ctx, (cb != NULL), cb, userdata, config); |
| |
| ret = spi_gd32_configure(dev, config); |
| if (ret < 0) { |
| goto error; |
| } |
| |
| SPI_CTL0(cfg->reg) |= SPI_CTL0_SPIEN; |
| |
| spi_context_buffers_setup(&data->ctx, tx_bufs, rx_bufs, 1); |
| |
| spi_context_cs_control(&data->ctx, true); |
| |
| #ifdef CONFIG_SPI_GD32_INTERRUPT |
| #ifdef CONFIG_SPI_GD32_DMA |
| if (spi_gd32_dma_enabled(dev)) { |
| for (size_t i = 0; i < ARRAY_SIZE(data->dma); i++) { |
| data->dma[i].count = 0; |
| } |
| |
| ret = spi_gd32_start_dma_transceive(dev); |
| if (ret < 0) { |
| goto dma_error; |
| } |
| } else |
| #endif |
| { |
| SPI_STAT(cfg->reg) &= |
| ~(SPI_STAT_RBNE | SPI_STAT_TBE | SPI_GD32_ERR_MASK); |
| SPI_CTL1(cfg->reg) |= |
| (SPI_CTL1_RBNEIE | SPI_CTL1_TBEIE | SPI_CTL1_ERRIE); |
| } |
| ret = spi_context_wait_for_completion(&data->ctx); |
| #else |
| do { |
| ret = spi_gd32_frame_exchange(dev); |
| if (ret < 0) { |
| break; |
| } |
| } while (spi_gd32_transfer_ongoing(data)); |
| |
| #ifdef CONFIG_SPI_ASYNC |
| spi_context_complete(&data->ctx, dev, ret); |
| #endif |
| #endif |
| |
| while (!(SPI_STAT(cfg->reg) & SPI_STAT_TBE) || |
| (SPI_STAT(cfg->reg) & SPI_STAT_TRANS)) { |
| /* Wait until last frame transfer complete. */ |
| } |
| |
| #ifdef CONFIG_SPI_GD32_DMA |
| dma_error: |
| #endif |
| spi_context_cs_control(&data->ctx, false); |
| |
| SPI_CTL0(cfg->reg) &= |
| ~(SPI_CTL0_SPIEN | SPI_CTL1_DMATEN | SPI_CTL1_DMAREN); |
| |
| error: |
| spi_context_release(&data->ctx, ret); |
| |
| return ret; |
| } |
| |
| static int spi_gd32_transceive(const struct device *dev, |
| const struct spi_config *config, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs) |
| { |
| return spi_gd32_transceive_impl(dev, config, tx_bufs, rx_bufs, NULL, NULL); |
| } |
| |
| #ifdef CONFIG_SPI_ASYNC |
| static int spi_gd32_transceive_async(const struct device *dev, |
| const struct spi_config *config, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| spi_callback_t cb, |
| void *userdata) |
| { |
| return spi_gd32_transceive_impl(dev, config, tx_bufs, rx_bufs, cb, userdata); |
| } |
| #endif |
| |
| #ifdef CONFIG_SPI_GD32_INTERRUPT |
| |
| static void spi_gd32_complete(const struct device *dev, int status) |
| { |
| struct spi_gd32_data *data = dev->data; |
| const struct spi_gd32_config *cfg = dev->config; |
| |
| SPI_CTL1(cfg->reg) &= |
| ~(SPI_CTL1_RBNEIE | SPI_CTL1_TBEIE | SPI_CTL1_ERRIE); |
| |
| #ifdef CONFIG_SPI_GD32_DMA |
| for (size_t i = 0; i < spi_gd32_dma_enabled_num(dev); i++) { |
| dma_stop(cfg->dma[i].dev, cfg->dma[i].channel); |
| } |
| #endif |
| |
| spi_context_complete(&data->ctx, dev, status); |
| } |
| |
| static void spi_gd32_isr(struct device *dev) |
| { |
| const struct spi_gd32_config *cfg = dev->config; |
| struct spi_gd32_data *data = dev->data; |
| int err = 0; |
| |
| if ((SPI_STAT(cfg->reg) & SPI_GD32_ERR_MASK) != 0) { |
| err = spi_gd32_get_err(cfg); |
| } else { |
| err = spi_gd32_frame_exchange(dev); |
| } |
| |
| if (err || !spi_gd32_transfer_ongoing(data)) { |
| spi_gd32_complete(dev, err); |
| } |
| |
| SPI_STAT(cfg->reg) = 0; |
| } |
| |
| #endif /* SPI_GD32_INTERRUPT */ |
| |
| #ifdef CONFIG_SPI_GD32_DMA |
| |
| static bool spi_gd32_chunk_transfer_finished(const struct device *dev) |
| { |
| struct spi_gd32_data *data = dev->data; |
| struct spi_gd32_dma_data *dma = data->dma; |
| const size_t chunk_len = spi_context_max_continuous_chunk(&data->ctx); |
| |
| return (MIN(dma[TX].count, dma[RX].count) >= chunk_len); |
| } |
| |
| static void spi_gd32_dma_callback(const struct device *dma_dev, void *arg, |
| uint32_t channel, int status) |
| { |
| const struct device *dev = (const struct device *)arg; |
| const struct spi_gd32_config *cfg = dev->config; |
| struct spi_gd32_data *data = dev->data; |
| const size_t chunk_len = spi_context_max_continuous_chunk(&data->ctx); |
| int err = 0; |
| |
| if (status < 0) { |
| LOG_ERR("dma:%p ch:%d callback gets error: %d", dma_dev, channel, |
| status); |
| spi_gd32_complete(dev, status); |
| return; |
| } |
| |
| for (size_t i = 0; i < ARRAY_SIZE(cfg->dma); i++) { |
| if (dma_dev == cfg->dma[i].dev && |
| channel == cfg->dma[i].channel) { |
| data->dma[i].count += chunk_len; |
| } |
| } |
| |
| /* Check transfer finished. |
| * The transmission of this chunk is complete if both the dma[TX].count |
| * and the dma[RX].count reach greater than or equal to the chunk_len. |
| * chunk_len is zero here means the transfer is already complete. |
| */ |
| if (spi_gd32_chunk_transfer_finished(dev)) { |
| if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) { |
| spi_context_update_tx(&data->ctx, 1, chunk_len); |
| spi_context_update_rx(&data->ctx, 1, chunk_len); |
| } else { |
| spi_context_update_tx(&data->ctx, 2, chunk_len); |
| spi_context_update_rx(&data->ctx, 2, chunk_len); |
| } |
| |
| if (spi_gd32_transfer_ongoing(data)) { |
| /* Next chunk is available, reset the count and |
| * continue processing |
| */ |
| data->dma[TX].count = 0; |
| data->dma[RX].count = 0; |
| } else { |
| /* All data is processed, complete the process */ |
| spi_context_complete(&data->ctx, dev, 0); |
| return; |
| } |
| } |
| |
| err = spi_gd32_start_dma_transceive(dev); |
| if (err) { |
| spi_gd32_complete(dev, err); |
| } |
| } |
| |
| #endif /* DMA */ |
| |
| static int spi_gd32_release(const struct device *dev, |
| const struct spi_config *config) |
| { |
| struct spi_gd32_data *data = dev->data; |
| |
| spi_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| static struct spi_driver_api spi_gd32_driver_api = { |
| .transceive = spi_gd32_transceive, |
| #ifdef CONFIG_SPI_ASYNC |
| .transceive_async = spi_gd32_transceive_async, |
| #endif |
| .release = spi_gd32_release |
| }; |
| |
| int spi_gd32_init(const struct device *dev) |
| { |
| struct spi_gd32_data *data = dev->data; |
| const struct spi_gd32_config *cfg = dev->config; |
| int ret; |
| #ifdef CONFIG_SPI_GD32_DMA |
| uint32_t ch_filter; |
| #endif |
| |
| (void)clock_control_on(GD32_CLOCK_CONTROLLER, |
| (clock_control_subsys_t *)&cfg->clkid); |
| |
| (void)reset_line_toggle_dt(&cfg->reset); |
| |
| ret = pinctrl_apply_state(cfg->pcfg, PINCTRL_STATE_DEFAULT); |
| if (ret) { |
| LOG_ERR("Failed to apply pinctrl state"); |
| return ret; |
| } |
| |
| #ifdef CONFIG_SPI_GD32_DMA |
| if ((cfg->dma[RX].dev && !cfg->dma[TX].dev) || |
| (cfg->dma[TX].dev && !cfg->dma[RX].dev)) { |
| LOG_ERR("DMA must be enabled for both TX and RX channels"); |
| return -ENODEV; |
| } |
| |
| for (size_t i = 0; i < spi_gd32_dma_enabled_num(dev); i++) { |
| if (!device_is_ready(cfg->dma[i].dev)) { |
| LOG_ERR("DMA %s not ready", cfg->dma[i].dev->name); |
| return -ENODEV; |
| } |
| |
| ch_filter = BIT(cfg->dma[i].channel); |
| ret = dma_request_channel(cfg->dma[i].dev, &ch_filter); |
| if (ret < 0) { |
| LOG_ERR("dma_request_channel failed %d", ret); |
| return ret; |
| } |
| } |
| #endif |
| |
| ret = spi_context_cs_configure_all(&data->ctx); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| #ifdef CONFIG_SPI_GD32_INTERRUPT |
| cfg->irq_configure(dev); |
| #endif |
| |
| spi_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| #define DMA_INITIALIZER(idx, dir) \ |
| { \ |
| .dev = DEVICE_DT_GET(DT_INST_DMAS_CTLR_BY_NAME(idx, dir)), \ |
| .channel = DT_INST_DMAS_CELL_BY_NAME(idx, dir, channel), \ |
| .slot = COND_CODE_1( \ |
| DT_HAS_COMPAT_STATUS_OKAY(gd_gd32_dma_v1), \ |
| (DT_INST_DMAS_CELL_BY_NAME(idx, dir, slot)), (0)), \ |
| .config = DT_INST_DMAS_CELL_BY_NAME(idx, dir, config), \ |
| .fifo_threshold = COND_CODE_1( \ |
| DT_HAS_COMPAT_STATUS_OKAY(gd_gd32_dma_v1), \ |
| (DT_INST_DMAS_CELL_BY_NAME(idx, dir, fifo_threshold)), \ |
| (0)), \ |
| } |
| |
| #define DMAS_DECL(idx) \ |
| { \ |
| COND_CODE_1(DT_INST_DMAS_HAS_NAME(idx, rx), \ |
| (DMA_INITIALIZER(idx, rx)), ({0})), \ |
| COND_CODE_1(DT_INST_DMAS_HAS_NAME(idx, tx), \ |
| (DMA_INITIALIZER(idx, tx)), ({0})), \ |
| } |
| |
| #define GD32_IRQ_CONFIGURE(idx) \ |
| static void spi_gd32_irq_configure_##idx(void) \ |
| { \ |
| IRQ_CONNECT(DT_INST_IRQN(idx), DT_INST_IRQ(idx, priority), \ |
| spi_gd32_isr, \ |
| DEVICE_DT_INST_GET(idx), 0); \ |
| irq_enable(DT_INST_IRQN(idx)); \ |
| } |
| |
| #define GD32_SPI_INIT(idx) \ |
| PINCTRL_DT_INST_DEFINE(idx); \ |
| IF_ENABLED(CONFIG_SPI_GD32_INTERRUPT, (GD32_IRQ_CONFIGURE(idx))); \ |
| static struct spi_gd32_data spi_gd32_data_##idx = { \ |
| SPI_CONTEXT_INIT_LOCK(spi_gd32_data_##idx, ctx), \ |
| SPI_CONTEXT_INIT_SYNC(spi_gd32_data_##idx, ctx), \ |
| SPI_CONTEXT_CS_GPIOS_INITIALIZE(DT_DRV_INST(idx), ctx) }; \ |
| static struct spi_gd32_config spi_gd32_config_##idx = { \ |
| .reg = DT_INST_REG_ADDR(idx), \ |
| .clkid = DT_INST_CLOCKS_CELL(idx, id), \ |
| .reset = RESET_DT_SPEC_INST_GET(idx), \ |
| .pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(idx), \ |
| IF_ENABLED(CONFIG_SPI_GD32_DMA, (.dma = DMAS_DECL(idx),)) \ |
| IF_ENABLED(CONFIG_SPI_GD32_INTERRUPT, \ |
| (.irq_configure = spi_gd32_irq_configure_##idx)) }; \ |
| DEVICE_DT_INST_DEFINE(idx, &spi_gd32_init, NULL, \ |
| &spi_gd32_data_##idx, &spi_gd32_config_##idx, \ |
| POST_KERNEL, CONFIG_SPI_INIT_PRIORITY, \ |
| &spi_gd32_driver_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(GD32_SPI_INIT) |