| /* l2cap_br.c - L2CAP BREDR oriented handling */ |
| |
| /* |
| * Copyright (c) 2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <zephyr/sys/iterable_sections.h> |
| #include <zephyr/sys/util.h> |
| |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/conn.h> |
| #include <zephyr/drivers/bluetooth/hci_driver.h> |
| |
| #include "hci_core.h" |
| #include "conn_internal.h" |
| #include "l2cap_internal.h" |
| #include "avdtp_internal.h" |
| #include "a2dp_internal.h" |
| #include "rfcomm_internal.h" |
| #include "sdp_internal.h" |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_l2cap_br, CONFIG_BT_L2CAP_LOG_LEVEL); |
| |
| #define BR_CHAN_RTX(_w) CONTAINER_OF(_w, struct bt_l2cap_br_chan, rtx_work) |
| |
| #define L2CAP_BR_PSM_START 0x0001 |
| #define L2CAP_BR_PSM_END 0xffff |
| |
| #define L2CAP_BR_CID_DYN_START 0x0040 |
| #define L2CAP_BR_CID_DYN_END 0xffff |
| #define L2CAP_BR_CID_IS_DYN(_cid) \ |
| (_cid >= L2CAP_BR_CID_DYN_START && _cid <= L2CAP_BR_CID_DYN_END) |
| |
| #define L2CAP_BR_MIN_MTU 48 |
| #define L2CAP_BR_DEFAULT_MTU 672 |
| |
| #define L2CAP_BR_PSM_SDP 0x0001 |
| |
| #define L2CAP_BR_INFO_TIMEOUT K_SECONDS(4) |
| #define L2CAP_BR_CFG_TIMEOUT K_SECONDS(4) |
| #define L2CAP_BR_DISCONN_TIMEOUT K_SECONDS(1) |
| #define L2CAP_BR_CONN_TIMEOUT K_SECONDS(40) |
| |
| /* |
| * L2CAP extended feature mask: |
| * BR/EDR fixed channel support enabled |
| */ |
| #define L2CAP_FEAT_FIXED_CHAN_MASK 0x00000080 |
| |
| enum { |
| /* Connection oriented channels flags */ |
| L2CAP_FLAG_CONN_LCONF_DONE, /* local config accepted by remote */ |
| L2CAP_FLAG_CONN_RCONF_DONE, /* remote config accepted by local */ |
| L2CAP_FLAG_CONN_ACCEPTOR, /* getting incoming connection req */ |
| L2CAP_FLAG_CONN_PENDING, /* remote sent pending result in rsp */ |
| |
| /* Signaling channel flags */ |
| L2CAP_FLAG_SIG_INFO_PENDING, /* retrieving remote l2cap info */ |
| L2CAP_FLAG_SIG_INFO_DONE, /* remote l2cap info is done */ |
| |
| /* fixed channels flags */ |
| L2CAP_FLAG_FIXED_CONNECTED, /* fixed connected */ |
| }; |
| |
| static sys_slist_t br_servers; |
| |
| |
| /* Pool for outgoing BR/EDR signaling packets, min MTU is 48 */ |
| NET_BUF_POOL_FIXED_DEFINE(br_sig_pool, CONFIG_BT_MAX_CONN, |
| BT_L2CAP_BUF_SIZE(L2CAP_BR_MIN_MTU), 8, NULL); |
| |
| /* BR/EDR L2CAP signalling channel specific context */ |
| struct bt_l2cap_br { |
| /* The channel this context is associated with */ |
| struct bt_l2cap_br_chan chan; |
| uint8_t info_ident; |
| uint8_t info_fixed_chan; |
| uint32_t info_feat_mask; |
| }; |
| |
| static struct bt_l2cap_br bt_l2cap_br_pool[CONFIG_BT_MAX_CONN]; |
| |
| struct bt_l2cap_chan *bt_l2cap_br_lookup_rx_cid(struct bt_conn *conn, |
| uint16_t cid) |
| { |
| struct bt_l2cap_chan *chan; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&conn->channels, chan, node) { |
| if (BR_CHAN(chan)->rx.cid == cid) { |
| return chan; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| struct bt_l2cap_chan *bt_l2cap_br_lookup_tx_cid(struct bt_conn *conn, |
| uint16_t cid) |
| { |
| struct bt_l2cap_chan *chan; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&conn->channels, chan, node) { |
| if (BR_CHAN(chan)->tx.cid == cid) { |
| return chan; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static struct bt_l2cap_br_chan* |
| l2cap_br_chan_alloc_cid(struct bt_conn *conn, struct bt_l2cap_chan *chan) |
| { |
| struct bt_l2cap_br_chan *br_chan = BR_CHAN(chan); |
| uint16_t cid; |
| |
| /* |
| * No action needed if there's already a CID allocated, e.g. in |
| * the case of a fixed channel. |
| */ |
| if (br_chan->rx.cid > 0) { |
| return br_chan; |
| } |
| |
| /* |
| * L2CAP_BR_CID_DYN_END is 0xffff so we don't check against it since |
| * cid is uint16_t, just check against uint16_t overflow |
| */ |
| for (cid = L2CAP_BR_CID_DYN_START; cid; cid++) { |
| if (!bt_l2cap_br_lookup_rx_cid(conn, cid)) { |
| br_chan->rx.cid = cid; |
| return br_chan; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void l2cap_br_chan_cleanup(struct bt_l2cap_chan *chan) |
| { |
| bt_l2cap_chan_remove(chan->conn, chan); |
| bt_l2cap_chan_del(chan); |
| } |
| |
| static void l2cap_br_chan_destroy(struct bt_l2cap_chan *chan) |
| { |
| struct bt_l2cap_br_chan *br_chan = BR_CHAN(chan); |
| |
| LOG_DBG("chan %p cid 0x%04x", br_chan, br_chan->rx.cid); |
| |
| /* Cancel ongoing work. Since the channel can be re-used after this |
| * we need to sync to make sure that the kernel does not have it |
| * in its queue anymore. |
| * |
| * In the case where we are in the context of executing the rtx_work |
| * item, we don't sync as it will deadlock the workqueue. |
| */ |
| if (k_current_get() != &br_chan->rtx_work.queue->thread) { |
| k_work_cancel_delayable_sync(&br_chan->rtx_work, &br_chan->rtx_sync); |
| } else { |
| k_work_cancel_delayable(&br_chan->rtx_work); |
| } |
| |
| atomic_clear(BR_CHAN(chan)->flags); |
| } |
| |
| static void l2cap_br_rtx_timeout(struct k_work *work) |
| { |
| struct bt_l2cap_br_chan *chan = BR_CHAN_RTX(work); |
| |
| LOG_WRN("chan %p timeout", chan); |
| |
| if (chan->rx.cid == BT_L2CAP_CID_BR_SIG) { |
| LOG_DBG("Skip BR/EDR signalling channel "); |
| atomic_clear_bit(chan->flags, L2CAP_FLAG_SIG_INFO_PENDING); |
| return; |
| } |
| |
| LOG_DBG("chan %p %s scid 0x%04x", chan, bt_l2cap_chan_state_str(chan->state), chan->rx.cid); |
| |
| switch (chan->state) { |
| case BT_L2CAP_CONFIG: |
| bt_l2cap_br_chan_disconnect(&chan->chan); |
| break; |
| case BT_L2CAP_DISCONNECTING: |
| case BT_L2CAP_CONNECTING: |
| l2cap_br_chan_cleanup(&chan->chan); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static bool l2cap_br_chan_add(struct bt_conn *conn, struct bt_l2cap_chan *chan, |
| bt_l2cap_chan_destroy_t destroy) |
| { |
| struct bt_l2cap_br_chan *ch = l2cap_br_chan_alloc_cid(conn, chan); |
| |
| if (!ch) { |
| LOG_DBG("Unable to allocate L2CAP CID"); |
| return false; |
| } |
| |
| /* All dynamic channels have the destroy handler which makes sure that |
| * the RTX work structure is properly released with a cancel sync. |
| * The fixed signal channel is only removed when disconnected and the |
| * disconnected handler is always called from the workqueue itself so |
| * canceling from there should always succeed. |
| */ |
| k_work_init_delayable(&ch->rtx_work, l2cap_br_rtx_timeout); |
| bt_l2cap_chan_add(conn, chan, destroy); |
| |
| return true; |
| } |
| |
| static uint8_t l2cap_br_get_ident(void) |
| { |
| static uint8_t ident; |
| |
| ident++; |
| /* handle integer overflow (0 is not valid) */ |
| if (!ident) { |
| ident++; |
| } |
| |
| return ident; |
| } |
| |
| /* Send the buffer and release it in case of failure. |
| * Any other cleanup in failure to send should be handled by the disconnected |
| * handler. |
| */ |
| static inline void l2cap_send(struct bt_conn *conn, uint16_t cid, |
| struct net_buf *buf) |
| { |
| if (bt_l2cap_send(conn, cid, buf)) { |
| net_buf_unref(buf); |
| } |
| } |
| |
| static void l2cap_br_chan_send_req(struct bt_l2cap_br_chan *chan, |
| struct net_buf *buf, k_timeout_t timeout) |
| { |
| |
| if (bt_l2cap_send(chan->chan.conn, BT_L2CAP_CID_BR_SIG, buf)) { |
| net_buf_unref(buf); |
| return; |
| } |
| |
| /* BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part A] page 126: |
| * |
| * The value of this timer is implementation-dependent but the minimum |
| * initial value is 1 second and the maximum initial value is 60 |
| * seconds. One RTX timer shall exist for each outstanding signaling |
| * request, including each Echo Request. The timer disappears on the |
| * final expiration, when the response is received, or the physical |
| * link is lost. |
| */ |
| k_work_reschedule(&chan->rtx_work, timeout); |
| } |
| |
| static void l2cap_br_get_info(struct bt_l2cap_br *l2cap, uint16_t info_type) |
| { |
| struct bt_l2cap_info_req *info; |
| struct net_buf *buf; |
| struct bt_l2cap_sig_hdr *hdr; |
| |
| LOG_DBG("info type %u", info_type); |
| |
| if (atomic_test_bit(l2cap->chan.flags, L2CAP_FLAG_SIG_INFO_PENDING)) { |
| return; |
| } |
| |
| switch (info_type) { |
| case BT_L2CAP_INFO_FEAT_MASK: |
| case BT_L2CAP_INFO_FIXED_CHAN: |
| break; |
| default: |
| LOG_WRN("Unsupported info type %u", info_type); |
| return; |
| } |
| |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| atomic_set_bit(l2cap->chan.flags, L2CAP_FLAG_SIG_INFO_PENDING); |
| l2cap->info_ident = l2cap_br_get_ident(); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_INFO_REQ; |
| hdr->ident = l2cap->info_ident; |
| hdr->len = sys_cpu_to_le16(sizeof(*info)); |
| |
| info = net_buf_add(buf, sizeof(*info)); |
| info->type = sys_cpu_to_le16(info_type); |
| |
| l2cap_br_chan_send_req(&l2cap->chan, buf, L2CAP_BR_INFO_TIMEOUT); |
| } |
| |
| static void connect_fixed_channel(struct bt_l2cap_br_chan *chan) |
| { |
| if (atomic_test_and_set_bit(chan->flags, L2CAP_FLAG_FIXED_CONNECTED)) { |
| return; |
| } |
| |
| if (chan->chan.ops && chan->chan.ops->connected) { |
| chan->chan.ops->connected(&chan->chan); |
| } |
| } |
| |
| static void connect_optional_fixed_channels(struct bt_l2cap_br *l2cap) |
| { |
| /* can be change to loop if more BR/EDR fixed channels are added */ |
| if (l2cap->info_fixed_chan & BIT(BT_L2CAP_CID_BR_SMP)) { |
| struct bt_l2cap_chan *chan; |
| |
| chan = bt_l2cap_br_lookup_rx_cid(l2cap->chan.chan.conn, |
| BT_L2CAP_CID_BR_SMP); |
| if (chan) { |
| connect_fixed_channel(BR_CHAN(chan)); |
| } |
| } |
| } |
| |
| static int l2cap_br_info_rsp(struct bt_l2cap_br *l2cap, uint8_t ident, |
| struct net_buf *buf) |
| { |
| struct bt_l2cap_info_rsp *rsp; |
| uint16_t type, result; |
| int err = 0; |
| |
| if (atomic_test_bit(l2cap->chan.flags, L2CAP_FLAG_SIG_INFO_DONE)) { |
| return 0; |
| } |
| |
| if (atomic_test_and_clear_bit(l2cap->chan.flags, |
| L2CAP_FLAG_SIG_INFO_PENDING)) { |
| /* |
| * Release RTX timer since got the response & there's pending |
| * command request. |
| */ |
| k_work_cancel_delayable(&l2cap->chan.rtx_work); |
| } |
| |
| if (buf->len < sizeof(*rsp)) { |
| LOG_ERR("Too small info rsp packet size"); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| if (ident != l2cap->info_ident) { |
| LOG_WRN("Idents mismatch"); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| rsp = net_buf_pull_mem(buf, sizeof(*rsp)); |
| result = sys_le16_to_cpu(rsp->result); |
| if (result != BT_L2CAP_INFO_SUCCESS) { |
| LOG_WRN("Result unsuccessful"); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| type = sys_le16_to_cpu(rsp->type); |
| |
| switch (type) { |
| case BT_L2CAP_INFO_FEAT_MASK: |
| l2cap->info_feat_mask = net_buf_pull_le32(buf); |
| LOG_DBG("remote info mask 0x%08x", l2cap->info_feat_mask); |
| |
| if (!(l2cap->info_feat_mask & L2CAP_FEAT_FIXED_CHAN_MASK)) { |
| break; |
| } |
| |
| l2cap_br_get_info(l2cap, BT_L2CAP_INFO_FIXED_CHAN); |
| return 0; |
| case BT_L2CAP_INFO_FIXED_CHAN: |
| l2cap->info_fixed_chan = net_buf_pull_u8(buf); |
| LOG_DBG("remote fixed channel mask 0x%02x", l2cap->info_fixed_chan); |
| |
| connect_optional_fixed_channels(l2cap); |
| |
| break; |
| default: |
| LOG_WRN("type 0x%04x unsupported", type); |
| err = -EINVAL; |
| break; |
| } |
| done: |
| atomic_set_bit(l2cap->chan.flags, L2CAP_FLAG_SIG_INFO_DONE); |
| l2cap->info_ident = 0U; |
| return err; |
| } |
| |
| static uint8_t get_fixed_channels_mask(void) |
| { |
| uint8_t mask = 0U; |
| |
| /* this needs to be enhanced if AMP Test Manager support is added */ |
| STRUCT_SECTION_FOREACH(bt_l2cap_br_fixed_chan, fchan) { |
| mask |= BIT(fchan->cid); |
| } |
| |
| return mask; |
| } |
| |
| static int l2cap_br_info_req(struct bt_l2cap_br *l2cap, uint8_t ident, |
| struct net_buf *buf) |
| { |
| struct bt_conn *conn = l2cap->chan.chan.conn; |
| struct bt_l2cap_info_req *req = (void *)buf->data; |
| struct bt_l2cap_info_rsp *rsp; |
| struct net_buf *rsp_buf; |
| struct bt_l2cap_sig_hdr *hdr_info; |
| uint16_t type; |
| |
| if (buf->len < sizeof(*req)) { |
| LOG_ERR("Too small info req packet size"); |
| return -EINVAL; |
| } |
| |
| rsp_buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| type = sys_le16_to_cpu(req->type); |
| LOG_DBG("type 0x%04x", type); |
| |
| hdr_info = net_buf_add(rsp_buf, sizeof(*hdr_info)); |
| hdr_info->code = BT_L2CAP_INFO_RSP; |
| hdr_info->ident = ident; |
| |
| rsp = net_buf_add(rsp_buf, sizeof(*rsp)); |
| |
| switch (type) { |
| case BT_L2CAP_INFO_FEAT_MASK: |
| rsp->type = sys_cpu_to_le16(BT_L2CAP_INFO_FEAT_MASK); |
| rsp->result = sys_cpu_to_le16(BT_L2CAP_INFO_SUCCESS); |
| net_buf_add_le32(rsp_buf, L2CAP_FEAT_FIXED_CHAN_MASK); |
| hdr_info->len = sys_cpu_to_le16(sizeof(*rsp) + sizeof(uint32_t)); |
| break; |
| case BT_L2CAP_INFO_FIXED_CHAN: |
| rsp->type = sys_cpu_to_le16(BT_L2CAP_INFO_FIXED_CHAN); |
| rsp->result = sys_cpu_to_le16(BT_L2CAP_INFO_SUCCESS); |
| /* fixed channel mask protocol data is 8 octets wide */ |
| (void)memset(net_buf_add(rsp_buf, 8), 0, 8); |
| rsp->data[0] = get_fixed_channels_mask(); |
| |
| hdr_info->len = sys_cpu_to_le16(sizeof(*rsp) + 8); |
| break; |
| default: |
| rsp->type = req->type; |
| rsp->result = sys_cpu_to_le16(BT_L2CAP_INFO_NOTSUPP); |
| hdr_info->len = sys_cpu_to_le16(sizeof(*rsp)); |
| break; |
| } |
| |
| l2cap_send(conn, BT_L2CAP_CID_BR_SIG, rsp_buf); |
| |
| return 0; |
| } |
| |
| void bt_l2cap_br_connected(struct bt_conn *conn) |
| { |
| struct bt_l2cap_chan *chan; |
| |
| STRUCT_SECTION_FOREACH(bt_l2cap_br_fixed_chan, fchan) { |
| struct bt_l2cap_br_chan *br_chan; |
| |
| if (!fchan->accept) { |
| continue; |
| } |
| |
| if (fchan->accept(conn, &chan) < 0) { |
| continue; |
| } |
| |
| br_chan = BR_CHAN(chan); |
| |
| br_chan->rx.cid = fchan->cid; |
| br_chan->tx.cid = fchan->cid; |
| |
| if (!l2cap_br_chan_add(conn, chan, NULL)) { |
| return; |
| } |
| |
| /* |
| * other fixed channels will be connected after Information |
| * Response is received |
| */ |
| if (fchan->cid == BT_L2CAP_CID_BR_SIG) { |
| struct bt_l2cap_br *sig_ch; |
| |
| connect_fixed_channel(br_chan); |
| |
| sig_ch = CONTAINER_OF(br_chan, struct bt_l2cap_br, chan); |
| l2cap_br_get_info(sig_ch, BT_L2CAP_INFO_FEAT_MASK); |
| } |
| } |
| } |
| |
| static struct bt_l2cap_server *l2cap_br_server_lookup_psm(uint16_t psm) |
| { |
| struct bt_l2cap_server *server; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&br_servers, server, node) { |
| if (server->psm == psm) { |
| return server; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void l2cap_br_conf_add_mtu(struct net_buf *buf, const uint16_t mtu) |
| { |
| net_buf_add_u8(buf, BT_L2CAP_CONF_OPT_MTU); |
| net_buf_add_u8(buf, sizeof(mtu)); |
| net_buf_add_le16(buf, mtu); |
| } |
| |
| static void l2cap_br_conf(struct bt_l2cap_chan *chan) |
| { |
| struct bt_l2cap_sig_hdr *hdr; |
| struct bt_l2cap_conf_req *conf; |
| struct net_buf *buf; |
| |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_CONF_REQ; |
| hdr->ident = l2cap_br_get_ident(); |
| conf = net_buf_add(buf, sizeof(*conf)); |
| (void)memset(conf, 0, sizeof(*conf)); |
| |
| conf->dcid = sys_cpu_to_le16(BR_CHAN(chan)->tx.cid); |
| /* |
| * Add MTU option if app set non default BR/EDR L2CAP MTU, |
| * otherwise sent empty configuration data meaning default MTU |
| * to be used. |
| */ |
| if (BR_CHAN(chan)->rx.mtu != L2CAP_BR_DEFAULT_MTU) { |
| l2cap_br_conf_add_mtu(buf, BR_CHAN(chan)->rx.mtu); |
| } |
| |
| hdr->len = sys_cpu_to_le16(buf->len - sizeof(*hdr)); |
| |
| /* |
| * TODO: |
| * might be needed to start tracking number of configuration iterations |
| * on both directions |
| */ |
| l2cap_br_chan_send_req(BR_CHAN(chan), buf, L2CAP_BR_CFG_TIMEOUT); |
| } |
| |
| enum l2cap_br_conn_security_result { |
| L2CAP_CONN_SECURITY_PASSED, |
| L2CAP_CONN_SECURITY_REJECT, |
| L2CAP_CONN_SECURITY_PENDING |
| }; |
| |
| /* |
| * Security helper against channel connection. |
| * Returns L2CAP_CONN_SECURITY_PASSED if: |
| * - existing security on link is applicable for requested PSM in connection, |
| * - legacy (non SSP) devices connecting with low security requirements, |
| * Returns L2CAP_CONN_SECURITY_PENDING if: |
| * - channel connection process is on hold since there were valid security |
| * conditions triggering authentication indirectly in subcall. |
| * Returns L2CAP_CONN_SECURITY_REJECT if: |
| * - bt_conn_set_security API returns < 0. |
| */ |
| |
| static enum l2cap_br_conn_security_result |
| l2cap_br_conn_security(struct bt_l2cap_chan *chan, const uint16_t psm) |
| { |
| int check; |
| struct bt_l2cap_br_chan *br_chan = BR_CHAN(chan); |
| |
| /* For SDP PSM there's no need to change existing security on link */ |
| if (br_chan->required_sec_level == BT_SECURITY_L0) { |
| return L2CAP_CONN_SECURITY_PASSED; |
| } |
| |
| /* |
| * No link key needed for legacy devices (pre 2.1) and when low security |
| * level is required. |
| */ |
| if (br_chan->required_sec_level == BT_SECURITY_L1 && |
| !BT_FEAT_HOST_SSP(chan->conn->br.features)) { |
| return L2CAP_CONN_SECURITY_PASSED; |
| } |
| |
| switch (br_chan->required_sec_level) { |
| case BT_SECURITY_L4: |
| case BT_SECURITY_L3: |
| case BT_SECURITY_L2: |
| break; |
| default: |
| /* |
| * For non SDP PSM connections GAP's Security Mode 4 requires at |
| * least unauthenticated link key and enabled encryption if |
| * remote supports SSP before any L2CAP CoC traffic. So preset |
| * local to MEDIUM security to trigger it if needed. |
| */ |
| if (BT_FEAT_HOST_SSP(chan->conn->br.features)) { |
| br_chan->required_sec_level = BT_SECURITY_L2; |
| } |
| break; |
| } |
| |
| check = bt_conn_set_security(chan->conn, br_chan->required_sec_level); |
| |
| /* |
| * Check case when on existing connection security level already covers |
| * channel (service) security requirements against link security and |
| * bt_conn_set_security API returns 0 what implies also there was no |
| * need to trigger authentication. |
| */ |
| if (check == 0 && |
| chan->conn->sec_level >= br_chan->required_sec_level) { |
| return L2CAP_CONN_SECURITY_PASSED; |
| } |
| |
| /* |
| * If 'check' still holds 0, it means local host just sent HCI |
| * authentication command to start procedure to increase link security |
| * since service/profile requires that. |
| */ |
| if (check == 0) { |
| return L2CAP_CONN_SECURITY_PENDING; |
| } |
| |
| /* |
| * For any other values in 'check' it means there was internal |
| * validation condition forbidding to start authentication at this |
| * moment. |
| */ |
| return L2CAP_CONN_SECURITY_REJECT; |
| } |
| |
| static void l2cap_br_send_conn_rsp(struct bt_conn *conn, uint16_t scid, |
| uint16_t dcid, uint8_t ident, uint16_t result) |
| { |
| struct net_buf *buf; |
| struct bt_l2cap_conn_rsp *rsp; |
| struct bt_l2cap_sig_hdr *hdr; |
| |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_CONN_RSP; |
| hdr->ident = ident; |
| hdr->len = sys_cpu_to_le16(sizeof(*rsp)); |
| |
| rsp = net_buf_add(buf, sizeof(*rsp)); |
| rsp->dcid = sys_cpu_to_le16(dcid); |
| rsp->scid = sys_cpu_to_le16(scid); |
| rsp->result = sys_cpu_to_le16(result); |
| |
| if (result == BT_L2CAP_BR_PENDING) { |
| rsp->status = sys_cpu_to_le16(BT_L2CAP_CS_AUTHEN_PEND); |
| } else { |
| rsp->status = sys_cpu_to_le16(BT_L2CAP_CS_NO_INFO); |
| } |
| |
| l2cap_send(conn, BT_L2CAP_CID_BR_SIG, buf); |
| } |
| |
| static int l2cap_br_conn_req_reply(struct bt_l2cap_chan *chan, uint16_t result) |
| { |
| /* Send response to connection request only when in acceptor role */ |
| if (!atomic_test_bit(BR_CHAN(chan)->flags, L2CAP_FLAG_CONN_ACCEPTOR)) { |
| return -ESRCH; |
| } |
| |
| l2cap_br_send_conn_rsp(chan->conn, BR_CHAN(chan)->tx.cid, |
| BR_CHAN(chan)->rx.cid, BR_CHAN(chan)->ident, result); |
| BR_CHAN(chan)->ident = 0U; |
| |
| return 0; |
| } |
| |
| static void l2cap_br_conn_req(struct bt_l2cap_br *l2cap, uint8_t ident, |
| struct net_buf *buf) |
| { |
| struct bt_conn *conn = l2cap->chan.chan.conn; |
| struct bt_l2cap_chan *chan; |
| struct bt_l2cap_server *server; |
| struct bt_l2cap_conn_req *req = (void *)buf->data; |
| uint16_t psm, scid, result; |
| struct bt_l2cap_br_chan *br_chan; |
| |
| if (buf->len < sizeof(*req)) { |
| LOG_ERR("Too small L2CAP conn req packet size"); |
| return; |
| } |
| |
| psm = sys_le16_to_cpu(req->psm); |
| scid = sys_le16_to_cpu(req->scid); |
| |
| LOG_DBG("psm 0x%02x scid 0x%04x", psm, scid); |
| |
| /* Check if there is a server registered */ |
| server = l2cap_br_server_lookup_psm(psm); |
| if (!server) { |
| result = BT_L2CAP_BR_ERR_PSM_NOT_SUPP; |
| goto no_chan; |
| } |
| |
| /* |
| * Report security violation for non SDP channel without encryption when |
| * remote supports SSP. |
| */ |
| if (server->sec_level != BT_SECURITY_L0 && |
| BT_FEAT_HOST_SSP(conn->br.features) && !conn->encrypt) { |
| result = BT_L2CAP_BR_ERR_SEC_BLOCK; |
| goto no_chan; |
| } |
| |
| if (!L2CAP_BR_CID_IS_DYN(scid)) { |
| result = BT_L2CAP_BR_ERR_INVALID_SCID; |
| goto no_chan; |
| } |
| |
| chan = bt_l2cap_br_lookup_tx_cid(conn, scid); |
| if (chan) { |
| /* |
| * we have a chan here but this is due to SCID being already in |
| * use so it is not channel we are suppose to pass to |
| * l2cap_br_conn_req_reply as wrong DCID would be used |
| */ |
| result = BT_L2CAP_BR_ERR_SCID_IN_USE; |
| goto no_chan; |
| } |
| |
| /* |
| * Request server to accept the new connection and allocate the |
| * channel. If no free channels available for PSM server reply with |
| * proper result and quit since chan pointer is uninitialized then. |
| */ |
| if (server->accept(conn, &chan) < 0) { |
| result = BT_L2CAP_BR_ERR_NO_RESOURCES; |
| goto no_chan; |
| } |
| |
| br_chan = BR_CHAN(chan); |
| br_chan->required_sec_level = server->sec_level; |
| |
| l2cap_br_chan_add(conn, chan, l2cap_br_chan_destroy); |
| BR_CHAN(chan)->tx.cid = scid; |
| br_chan->ident = ident; |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_CONNECTING); |
| atomic_set_bit(BR_CHAN(chan)->flags, L2CAP_FLAG_CONN_ACCEPTOR); |
| |
| /* Disable fragmentation of l2cap rx pdu */ |
| BR_CHAN(chan)->rx.mtu = MIN(BR_CHAN(chan)->rx.mtu, BT_L2CAP_RX_MTU); |
| |
| switch (l2cap_br_conn_security(chan, psm)) { |
| case L2CAP_CONN_SECURITY_PENDING: |
| result = BT_L2CAP_BR_PENDING; |
| /* TODO: auth timeout */ |
| break; |
| case L2CAP_CONN_SECURITY_PASSED: |
| result = BT_L2CAP_BR_SUCCESS; |
| break; |
| case L2CAP_CONN_SECURITY_REJECT: |
| default: |
| result = BT_L2CAP_BR_ERR_SEC_BLOCK; |
| break; |
| } |
| /* Reply on connection request as acceptor */ |
| l2cap_br_conn_req_reply(chan, result); |
| |
| if (result != BT_L2CAP_BR_SUCCESS) { |
| /* Disconnect link when security rules were violated */ |
| if (result == BT_L2CAP_BR_ERR_SEC_BLOCK) { |
| bt_conn_disconnect(conn, BT_HCI_ERR_AUTH_FAIL); |
| } |
| |
| return; |
| } |
| |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_CONFIG); |
| l2cap_br_conf(chan); |
| return; |
| |
| no_chan: |
| l2cap_br_send_conn_rsp(conn, scid, 0, ident, result); |
| } |
| |
| static void l2cap_br_conf_rsp(struct bt_l2cap_br *l2cap, uint8_t ident, |
| uint16_t len, struct net_buf *buf) |
| { |
| struct bt_conn *conn = l2cap->chan.chan.conn; |
| struct bt_l2cap_chan *chan; |
| struct bt_l2cap_conf_rsp *rsp = (void *)buf->data; |
| uint16_t flags, scid, result, opt_len; |
| struct bt_l2cap_br_chan *br_chan; |
| |
| if (buf->len < sizeof(*rsp)) { |
| LOG_ERR("Too small L2CAP conf rsp packet size"); |
| return; |
| } |
| |
| flags = sys_le16_to_cpu(rsp->flags); |
| scid = sys_le16_to_cpu(rsp->scid); |
| result = sys_le16_to_cpu(rsp->result); |
| opt_len = len - sizeof(*rsp); |
| |
| LOG_DBG("scid 0x%04x flags 0x%02x result 0x%02x len %u", scid, flags, result, opt_len); |
| |
| chan = bt_l2cap_br_lookup_rx_cid(conn, scid); |
| if (!chan) { |
| LOG_ERR("channel mismatch!"); |
| return; |
| } |
| |
| br_chan = BR_CHAN(chan); |
| |
| /* Release RTX work since got the response */ |
| k_work_cancel_delayable(&br_chan->rtx_work); |
| |
| /* |
| * TODO: handle other results than success and parse response data if |
| * available |
| */ |
| switch (result) { |
| case BT_L2CAP_CONF_SUCCESS: |
| atomic_set_bit(br_chan->flags, L2CAP_FLAG_CONN_LCONF_DONE); |
| |
| if (br_chan->state == BT_L2CAP_CONFIG && |
| atomic_test_bit(br_chan->flags, |
| L2CAP_FLAG_CONN_RCONF_DONE)) { |
| LOG_DBG("scid 0x%04x rx MTU %u dcid 0x%04x tx MTU %u", br_chan->rx.cid, |
| br_chan->rx.mtu, br_chan->tx.cid, br_chan->tx.mtu); |
| |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_CONNECTED); |
| if (chan->ops && chan->ops->connected) { |
| chan->ops->connected(chan); |
| } |
| } |
| break; |
| default: |
| /* currently disconnect channel on non success result */ |
| bt_l2cap_chan_disconnect(chan); |
| break; |
| } |
| } |
| |
| int bt_l2cap_br_server_register(struct bt_l2cap_server *server) |
| { |
| if (server->psm < L2CAP_BR_PSM_START || !server->accept) { |
| return -EINVAL; |
| } |
| |
| /* PSM must be odd and lsb of upper byte must be 0 */ |
| if ((server->psm & 0x0101) != 0x0001) { |
| return -EINVAL; |
| } |
| |
| if (server->sec_level > BT_SECURITY_L4) { |
| return -EINVAL; |
| } else if (server->sec_level == BT_SECURITY_L0 && |
| server->psm != L2CAP_BR_PSM_SDP) { |
| server->sec_level = BT_SECURITY_L1; |
| } |
| |
| /* Check if given PSM is already in use */ |
| if (l2cap_br_server_lookup_psm(server->psm)) { |
| LOG_DBG("PSM already registered"); |
| return -EADDRINUSE; |
| } |
| |
| LOG_DBG("PSM 0x%04x", server->psm); |
| |
| sys_slist_append(&br_servers, &server->node); |
| |
| return 0; |
| } |
| |
| static void l2cap_br_send_reject(struct bt_conn *conn, uint8_t ident, |
| uint16_t reason, void *data, uint8_t data_len) |
| { |
| struct bt_l2cap_cmd_reject *rej; |
| struct bt_l2cap_sig_hdr *hdr; |
| struct net_buf *buf; |
| |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_CMD_REJECT; |
| hdr->ident = ident; |
| hdr->len = sys_cpu_to_le16(sizeof(*rej) + data_len); |
| |
| rej = net_buf_add(buf, sizeof(*rej)); |
| rej->reason = sys_cpu_to_le16(reason); |
| |
| /* |
| * optional data if available must be already in little-endian format |
| * made by caller.and be compliant with Core 4.2 [Vol 3, Part A, 4.1, |
| * table 4.4] |
| */ |
| if (data) { |
| net_buf_add_mem(buf, data, data_len); |
| } |
| |
| l2cap_send(conn, BT_L2CAP_CID_BR_SIG, buf); |
| } |
| |
| static uint16_t l2cap_br_conf_opt_mtu(struct bt_l2cap_chan *chan, |
| struct net_buf *buf, size_t len) |
| { |
| uint16_t mtu, result = BT_L2CAP_CONF_SUCCESS; |
| |
| /* Core 4.2 [Vol 3, Part A, 5.1] MTU payload length */ |
| if (len != 2) { |
| LOG_ERR("tx MTU length %zu invalid", len); |
| result = BT_L2CAP_CONF_REJECT; |
| goto done; |
| } |
| |
| /* pulling MTU value moves buf data to next option item */ |
| mtu = net_buf_pull_le16(buf); |
| if (mtu < L2CAP_BR_MIN_MTU) { |
| result = BT_L2CAP_CONF_UNACCEPT; |
| BR_CHAN(chan)->tx.mtu = L2CAP_BR_MIN_MTU; |
| LOG_DBG("tx MTU %u invalid", mtu); |
| goto done; |
| } |
| |
| BR_CHAN(chan)->tx.mtu = mtu; |
| LOG_DBG("tx MTU %u", mtu); |
| done: |
| return result; |
| } |
| |
| static void l2cap_br_conf_req(struct bt_l2cap_br *l2cap, uint8_t ident, |
| uint16_t len, struct net_buf *buf) |
| { |
| struct bt_conn *conn = l2cap->chan.chan.conn; |
| struct bt_l2cap_chan *chan; |
| struct bt_l2cap_conf_req *req; |
| struct bt_l2cap_sig_hdr *hdr; |
| struct bt_l2cap_conf_rsp *rsp; |
| struct bt_l2cap_conf_opt *opt; |
| uint16_t flags, dcid, opt_len, hint, result = BT_L2CAP_CONF_SUCCESS; |
| |
| if (buf->len < sizeof(*req)) { |
| LOG_ERR("Too small L2CAP conf req packet size"); |
| return; |
| } |
| |
| req = net_buf_pull_mem(buf, sizeof(*req)); |
| flags = sys_le16_to_cpu(req->flags); |
| dcid = sys_le16_to_cpu(req->dcid); |
| opt_len = len - sizeof(*req); |
| |
| LOG_DBG("dcid 0x%04x flags 0x%02x len %u", dcid, flags, opt_len); |
| |
| chan = bt_l2cap_br_lookup_rx_cid(conn, dcid); |
| if (!chan) { |
| LOG_ERR("rx channel mismatch!"); |
| struct bt_l2cap_cmd_reject_cid_data data = {.scid = req->dcid, |
| .dcid = 0, |
| }; |
| |
| l2cap_br_send_reject(conn, ident, BT_L2CAP_REJ_INVALID_CID, |
| &data, sizeof(data)); |
| return; |
| } |
| |
| if (!opt_len) { |
| LOG_DBG("tx default MTU %u", L2CAP_BR_DEFAULT_MTU); |
| BR_CHAN(chan)->tx.mtu = L2CAP_BR_DEFAULT_MTU; |
| goto send_rsp; |
| } |
| |
| while (buf->len >= sizeof(*opt)) { |
| opt = net_buf_pull_mem(buf, sizeof(*opt)); |
| |
| /* make sure opt object can get safe dereference in iteration */ |
| if (buf->len < opt->len) { |
| LOG_ERR("Received too short option data"); |
| result = BT_L2CAP_CONF_REJECT; |
| break; |
| } |
| |
| hint = opt->type & BT_L2CAP_CONF_HINT; |
| |
| switch (opt->type & BT_L2CAP_CONF_MASK) { |
| case BT_L2CAP_CONF_OPT_MTU: |
| /* getting MTU modifies buf internals */ |
| result = l2cap_br_conf_opt_mtu(chan, buf, opt->len); |
| /* |
| * MTU is done. For now bailout the loop but later on |
| * there can be a need to continue checking next options |
| * that are after MTU value and then goto is not proper |
| * way out here. |
| */ |
| goto send_rsp; |
| default: |
| if (!hint) { |
| LOG_DBG("option %u not handled", opt->type); |
| goto send_rsp; |
| } |
| |
| /* Update buffer to point at next option */ |
| net_buf_pull(buf, opt->len); |
| break; |
| } |
| } |
| |
| send_rsp: |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_CONF_RSP; |
| hdr->ident = ident; |
| rsp = net_buf_add(buf, sizeof(*rsp)); |
| (void)memset(rsp, 0, sizeof(*rsp)); |
| |
| rsp->result = sys_cpu_to_le16(result); |
| rsp->scid = sys_cpu_to_le16(BR_CHAN(chan)->tx.cid); |
| |
| /* |
| * TODO: If options other than MTU became meaningful then processing |
| * the options chain need to be modified and taken into account when |
| * sending back to peer. |
| */ |
| if (result == BT_L2CAP_CONF_UNACCEPT) { |
| l2cap_br_conf_add_mtu(buf, BR_CHAN(chan)->tx.mtu); |
| } |
| |
| hdr->len = sys_cpu_to_le16(buf->len - sizeof(*hdr)); |
| |
| l2cap_send(conn, BT_L2CAP_CID_BR_SIG, buf); |
| |
| if (result != BT_L2CAP_CONF_SUCCESS) { |
| return; |
| } |
| |
| atomic_set_bit(BR_CHAN(chan)->flags, L2CAP_FLAG_CONN_RCONF_DONE); |
| |
| if (atomic_test_bit(BR_CHAN(chan)->flags, L2CAP_FLAG_CONN_LCONF_DONE) && |
| BR_CHAN(chan)->state == BT_L2CAP_CONFIG) { |
| LOG_DBG("scid 0x%04x rx MTU %u dcid 0x%04x tx MTU %u", BR_CHAN(chan)->rx.cid, |
| BR_CHAN(chan)->rx.mtu, BR_CHAN(chan)->tx.cid, BR_CHAN(chan)->tx.mtu); |
| |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_CONNECTED); |
| if (chan->ops && chan->ops->connected) { |
| chan->ops->connected(chan); |
| } |
| } |
| } |
| |
| static struct bt_l2cap_br_chan *l2cap_br_remove_tx_cid(struct bt_conn *conn, |
| uint16_t cid) |
| { |
| struct bt_l2cap_chan *chan; |
| sys_snode_t *prev = NULL; |
| |
| /* Protect fixed channels against accidental removal */ |
| if (!L2CAP_BR_CID_IS_DYN(cid)) { |
| return NULL; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&conn->channels, chan, node) { |
| if (BR_CHAN(chan)->tx.cid == cid) { |
| sys_slist_remove(&conn->channels, prev, &chan->node); |
| return BR_CHAN(chan); |
| } |
| |
| prev = &chan->node; |
| } |
| |
| return NULL; |
| } |
| |
| static void l2cap_br_disconn_req(struct bt_l2cap_br *l2cap, uint8_t ident, |
| struct net_buf *buf) |
| { |
| struct bt_conn *conn = l2cap->chan.chan.conn; |
| struct bt_l2cap_br_chan *chan; |
| struct bt_l2cap_disconn_req *req = (void *)buf->data; |
| struct bt_l2cap_disconn_rsp *rsp; |
| struct bt_l2cap_sig_hdr *hdr; |
| uint16_t scid, dcid; |
| |
| if (buf->len < sizeof(*req)) { |
| LOG_ERR("Too small disconn req packet size"); |
| return; |
| } |
| |
| dcid = sys_le16_to_cpu(req->dcid); |
| scid = sys_le16_to_cpu(req->scid); |
| |
| LOG_DBG("scid 0x%04x dcid 0x%04x", dcid, scid); |
| |
| chan = l2cap_br_remove_tx_cid(conn, scid); |
| if (!chan) { |
| struct bt_l2cap_cmd_reject_cid_data data; |
| |
| data.scid = req->scid; |
| data.dcid = req->dcid; |
| l2cap_br_send_reject(conn, ident, BT_L2CAP_REJ_INVALID_CID, |
| &data, sizeof(data)); |
| return; |
| } |
| |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_DISCONN_RSP; |
| hdr->ident = ident; |
| hdr->len = sys_cpu_to_le16(sizeof(*rsp)); |
| |
| rsp = net_buf_add(buf, sizeof(*rsp)); |
| rsp->dcid = sys_cpu_to_le16(chan->rx.cid); |
| rsp->scid = sys_cpu_to_le16(chan->tx.cid); |
| |
| bt_l2cap_chan_del(&chan->chan); |
| |
| l2cap_send(conn, BT_L2CAP_CID_BR_SIG, buf); |
| } |
| |
| static void l2cap_br_connected(struct bt_l2cap_chan *chan) |
| { |
| LOG_DBG("ch %p cid 0x%04x", BR_CHAN(chan), BR_CHAN(chan)->rx.cid); |
| } |
| |
| static void l2cap_br_disconnected(struct bt_l2cap_chan *chan) |
| { |
| struct bt_l2cap_br_chan *br_chan = BR_CHAN(chan); |
| |
| LOG_DBG("ch %p cid 0x%04x", br_chan, br_chan->rx.cid); |
| |
| if (atomic_test_and_clear_bit(br_chan->flags, |
| L2CAP_FLAG_SIG_INFO_PENDING)) { |
| /* Cancel RTX work on signal channel. |
| * Disconnected callback is always called from system workqueue |
| * so this should always succeed. |
| */ |
| (void)k_work_cancel_delayable(&br_chan->rtx_work); |
| } |
| } |
| |
| int bt_l2cap_br_chan_disconnect(struct bt_l2cap_chan *chan) |
| { |
| struct bt_conn *conn = chan->conn; |
| struct net_buf *buf; |
| struct bt_l2cap_disconn_req *req; |
| struct bt_l2cap_sig_hdr *hdr; |
| struct bt_l2cap_br_chan *br_chan; |
| |
| if (!conn) { |
| return -ENOTCONN; |
| } |
| |
| br_chan = BR_CHAN(chan); |
| |
| if (br_chan->state == BT_L2CAP_DISCONNECTING) { |
| return -EALREADY; |
| } |
| |
| LOG_DBG("chan %p scid 0x%04x dcid 0x%04x", chan, br_chan->rx.cid, br_chan->tx.cid); |
| |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_DISCONN_REQ; |
| hdr->ident = l2cap_br_get_ident(); |
| hdr->len = sys_cpu_to_le16(sizeof(*req)); |
| |
| req = net_buf_add(buf, sizeof(*req)); |
| req->dcid = sys_cpu_to_le16(br_chan->tx.cid); |
| req->scid = sys_cpu_to_le16(br_chan->rx.cid); |
| |
| l2cap_br_chan_send_req(br_chan, buf, L2CAP_BR_DISCONN_TIMEOUT); |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_DISCONNECTING); |
| |
| return 0; |
| } |
| |
| static void l2cap_br_disconn_rsp(struct bt_l2cap_br *l2cap, uint8_t ident, |
| struct net_buf *buf) |
| { |
| struct bt_conn *conn = l2cap->chan.chan.conn; |
| struct bt_l2cap_br_chan *chan; |
| struct bt_l2cap_disconn_rsp *rsp = (void *)buf->data; |
| uint16_t dcid, scid; |
| |
| if (buf->len < sizeof(*rsp)) { |
| LOG_ERR("Too small disconn rsp packet size"); |
| return; |
| } |
| |
| dcid = sys_le16_to_cpu(rsp->dcid); |
| scid = sys_le16_to_cpu(rsp->scid); |
| |
| LOG_DBG("dcid 0x%04x scid 0x%04x", dcid, scid); |
| |
| chan = l2cap_br_remove_tx_cid(conn, dcid); |
| if (!chan) { |
| LOG_WRN("No dcid 0x%04x channel found", dcid); |
| return; |
| } |
| |
| bt_l2cap_chan_del(&chan->chan); |
| } |
| |
| int bt_l2cap_br_chan_connect(struct bt_conn *conn, struct bt_l2cap_chan *chan, |
| uint16_t psm) |
| { |
| struct net_buf *buf; |
| struct bt_l2cap_sig_hdr *hdr; |
| struct bt_l2cap_conn_req *req; |
| struct bt_l2cap_br_chan *br_chan = BR_CHAN(chan); |
| |
| if (!psm) { |
| return -EINVAL; |
| } |
| |
| if (br_chan->psm) { |
| return -EEXIST; |
| } |
| |
| /* PSM must be odd and lsb of upper byte must be 0 */ |
| if ((psm & 0x0101) != 0x0001) { |
| return -EINVAL; |
| } |
| |
| if (br_chan->required_sec_level > BT_SECURITY_L4) { |
| return -EINVAL; |
| } else if (br_chan->required_sec_level == BT_SECURITY_L0 && |
| psm != L2CAP_BR_PSM_SDP) { |
| br_chan->required_sec_level = BT_SECURITY_L1; |
| } |
| |
| switch (br_chan->state) { |
| case BT_L2CAP_CONNECTED: |
| /* Already connected */ |
| return -EISCONN; |
| case BT_L2CAP_DISCONNECTED: |
| /* Can connect */ |
| break; |
| case BT_L2CAP_CONFIG: |
| case BT_L2CAP_DISCONNECTING: |
| default: |
| /* Bad context */ |
| return -EBUSY; |
| } |
| |
| if (!l2cap_br_chan_add(conn, chan, l2cap_br_chan_destroy)) { |
| return -ENOMEM; |
| } |
| |
| br_chan->psm = psm; |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_CONNECTING); |
| atomic_set_bit(BR_CHAN(chan)->flags, L2CAP_FLAG_CONN_PENDING); |
| |
| switch (l2cap_br_conn_security(chan, psm)) { |
| case L2CAP_CONN_SECURITY_PENDING: |
| /* |
| * Authentication was triggered, wait with sending request on |
| * connection security changed callback context. |
| */ |
| return 0; |
| case L2CAP_CONN_SECURITY_PASSED: |
| break; |
| case L2CAP_CONN_SECURITY_REJECT: |
| default: |
| l2cap_br_chan_cleanup(chan); |
| return -EIO; |
| } |
| |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_CONN_REQ; |
| hdr->ident = l2cap_br_get_ident(); |
| hdr->len = sys_cpu_to_le16(sizeof(*req)); |
| |
| req = net_buf_add(buf, sizeof(*req)); |
| req->psm = sys_cpu_to_le16(psm); |
| req->scid = sys_cpu_to_le16(BR_CHAN(chan)->rx.cid); |
| |
| l2cap_br_chan_send_req(BR_CHAN(chan), buf, L2CAP_BR_CONN_TIMEOUT); |
| |
| return 0; |
| } |
| |
| static void l2cap_br_conn_rsp(struct bt_l2cap_br *l2cap, uint8_t ident, |
| struct net_buf *buf) |
| { |
| struct bt_conn *conn = l2cap->chan.chan.conn; |
| struct bt_l2cap_chan *chan; |
| struct bt_l2cap_conn_rsp *rsp = (void *)buf->data; |
| uint16_t dcid, scid, result, status; |
| struct bt_l2cap_br_chan *br_chan; |
| |
| if (buf->len < sizeof(*rsp)) { |
| LOG_ERR("Too small L2CAP conn rsp packet size"); |
| return; |
| } |
| |
| dcid = sys_le16_to_cpu(rsp->dcid); |
| scid = sys_le16_to_cpu(rsp->scid); |
| result = sys_le16_to_cpu(rsp->result); |
| status = sys_le16_to_cpu(rsp->status); |
| |
| LOG_DBG("dcid 0x%04x scid 0x%04x result %u status %u", dcid, scid, result, status); |
| |
| chan = bt_l2cap_br_lookup_rx_cid(conn, scid); |
| if (!chan) { |
| LOG_ERR("No scid 0x%04x channel found", scid); |
| return; |
| } |
| |
| br_chan = BR_CHAN(chan); |
| |
| /* Release RTX work since got the response */ |
| k_work_cancel_delayable(&br_chan->rtx_work); |
| |
| if (br_chan->state != BT_L2CAP_CONNECTING) { |
| LOG_DBG("Invalid channel %p state %s", chan, |
| bt_l2cap_chan_state_str(br_chan->state)); |
| return; |
| } |
| |
| switch (result) { |
| case BT_L2CAP_BR_SUCCESS: |
| br_chan->ident = 0U; |
| BR_CHAN(chan)->tx.cid = dcid; |
| l2cap_br_conf(chan); |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_CONFIG); |
| atomic_clear_bit(BR_CHAN(chan)->flags, L2CAP_FLAG_CONN_PENDING); |
| break; |
| case BT_L2CAP_BR_PENDING: |
| k_work_reschedule(&br_chan->rtx_work, L2CAP_BR_CONN_TIMEOUT); |
| break; |
| default: |
| l2cap_br_chan_cleanup(chan); |
| break; |
| } |
| } |
| |
| int bt_l2cap_br_chan_send_cb(struct bt_l2cap_chan *chan, struct net_buf *buf, bt_conn_tx_cb_t cb, |
| void *user_data) |
| { |
| struct bt_l2cap_br_chan *br_chan = BR_CHAN(chan); |
| |
| if (buf->len > br_chan->tx.mtu) { |
| return -EMSGSIZE; |
| } |
| |
| return bt_l2cap_send_cb(br_chan->chan.conn, br_chan->tx.cid, buf, cb, user_data); |
| } |
| |
| int bt_l2cap_br_chan_send(struct bt_l2cap_chan *chan, struct net_buf *buf) |
| { |
| return bt_l2cap_br_chan_send_cb(chan, buf, NULL, NULL); |
| } |
| |
| static int l2cap_br_recv(struct bt_l2cap_chan *chan, struct net_buf *buf) |
| { |
| struct bt_l2cap_br *l2cap = CONTAINER_OF(chan, struct bt_l2cap_br, chan); |
| struct bt_l2cap_sig_hdr *hdr; |
| uint16_t len; |
| |
| if (buf->len < sizeof(*hdr)) { |
| LOG_ERR("Too small L2CAP signaling PDU"); |
| return 0; |
| } |
| |
| hdr = net_buf_pull_mem(buf, sizeof(*hdr)); |
| len = sys_le16_to_cpu(hdr->len); |
| |
| LOG_DBG("Signaling code 0x%02x ident %u len %u", hdr->code, hdr->ident, len); |
| |
| if (buf->len != len) { |
| LOG_ERR("L2CAP length mismatch (%u != %u)", buf->len, len); |
| return 0; |
| } |
| |
| if (!hdr->ident) { |
| LOG_ERR("Invalid ident value in L2CAP PDU"); |
| return 0; |
| } |
| |
| switch (hdr->code) { |
| case BT_L2CAP_INFO_RSP: |
| l2cap_br_info_rsp(l2cap, hdr->ident, buf); |
| break; |
| case BT_L2CAP_INFO_REQ: |
| l2cap_br_info_req(l2cap, hdr->ident, buf); |
| break; |
| case BT_L2CAP_DISCONN_REQ: |
| l2cap_br_disconn_req(l2cap, hdr->ident, buf); |
| break; |
| case BT_L2CAP_CONN_REQ: |
| l2cap_br_conn_req(l2cap, hdr->ident, buf); |
| break; |
| case BT_L2CAP_CONF_RSP: |
| l2cap_br_conf_rsp(l2cap, hdr->ident, len, buf); |
| break; |
| case BT_L2CAP_CONF_REQ: |
| l2cap_br_conf_req(l2cap, hdr->ident, len, buf); |
| break; |
| case BT_L2CAP_DISCONN_RSP: |
| l2cap_br_disconn_rsp(l2cap, hdr->ident, buf); |
| break; |
| case BT_L2CAP_CONN_RSP: |
| l2cap_br_conn_rsp(l2cap, hdr->ident, buf); |
| break; |
| default: |
| LOG_WRN("Unknown/Unsupported L2CAP PDU code 0x%02x", hdr->code); |
| l2cap_br_send_reject(chan->conn, hdr->ident, |
| BT_L2CAP_REJ_NOT_UNDERSTOOD, NULL, 0); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void l2cap_br_conn_pend(struct bt_l2cap_chan *chan, uint8_t status) |
| { |
| struct net_buf *buf; |
| struct bt_l2cap_sig_hdr *hdr; |
| struct bt_l2cap_conn_req *req; |
| |
| if (BR_CHAN(chan)->state != BT_L2CAP_CONNECTING) { |
| return; |
| } |
| |
| LOG_DBG("chan %p status 0x%02x encr 0x%02x", chan, status, chan->conn->encrypt); |
| |
| if (status) { |
| /* |
| * Security procedure status is non-zero so respond with |
| * security violation only as channel acceptor. |
| */ |
| l2cap_br_conn_req_reply(chan, BT_L2CAP_BR_ERR_SEC_BLOCK); |
| |
| /* Release channel allocated to outgoing connection request */ |
| if (atomic_test_bit(BR_CHAN(chan)->flags, |
| L2CAP_FLAG_CONN_PENDING)) { |
| l2cap_br_chan_cleanup(chan); |
| } |
| |
| return; |
| } |
| |
| if (!chan->conn->encrypt) { |
| return; |
| } |
| |
| /* |
| * For incoming connection state send confirming outstanding |
| * response and initiate configuration request. |
| */ |
| if (l2cap_br_conn_req_reply(chan, BT_L2CAP_BR_SUCCESS) == 0) { |
| bt_l2cap_chan_set_state(chan, BT_L2CAP_CONFIG); |
| /* |
| * Initialize config request since remote needs to know |
| * local MTU segmentation. |
| */ |
| l2cap_br_conf(chan); |
| } else if (atomic_test_and_clear_bit(BR_CHAN(chan)->flags, |
| L2CAP_FLAG_CONN_PENDING)) { |
| buf = bt_l2cap_create_pdu(&br_sig_pool, 0); |
| |
| hdr = net_buf_add(buf, sizeof(*hdr)); |
| hdr->code = BT_L2CAP_CONN_REQ; |
| hdr->ident = l2cap_br_get_ident(); |
| hdr->len = sys_cpu_to_le16(sizeof(*req)); |
| |
| req = net_buf_add(buf, sizeof(*req)); |
| req->psm = sys_cpu_to_le16(BR_CHAN(chan)->psm); |
| req->scid = sys_cpu_to_le16(BR_CHAN(chan)->rx.cid); |
| |
| l2cap_br_chan_send_req(BR_CHAN(chan), buf, |
| L2CAP_BR_CONN_TIMEOUT); |
| } |
| } |
| |
| void l2cap_br_encrypt_change(struct bt_conn *conn, uint8_t hci_status) |
| { |
| struct bt_l2cap_chan *chan; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&conn->channels, chan, node) { |
| l2cap_br_conn_pend(chan, hci_status); |
| |
| if (chan->ops && chan->ops->encrypt_change) { |
| chan->ops->encrypt_change(chan, hci_status); |
| } |
| } |
| } |
| |
| static void check_fixed_channel(struct bt_l2cap_chan *chan) |
| { |
| struct bt_l2cap_br_chan *br_chan = BR_CHAN(chan); |
| |
| if (br_chan->rx.cid < L2CAP_BR_CID_DYN_START) { |
| connect_fixed_channel(br_chan); |
| } |
| } |
| |
| void bt_l2cap_br_recv(struct bt_conn *conn, struct net_buf *buf) |
| { |
| struct bt_l2cap_hdr *hdr; |
| struct bt_l2cap_chan *chan; |
| uint16_t cid; |
| |
| if (buf->len < sizeof(*hdr)) { |
| LOG_ERR("Too small L2CAP PDU received"); |
| net_buf_unref(buf); |
| return; |
| } |
| |
| hdr = net_buf_pull_mem(buf, sizeof(*hdr)); |
| cid = sys_le16_to_cpu(hdr->cid); |
| |
| chan = bt_l2cap_br_lookup_rx_cid(conn, cid); |
| if (!chan) { |
| LOG_WRN("Ignoring data for unknown channel ID 0x%04x", cid); |
| net_buf_unref(buf); |
| return; |
| } |
| |
| /* |
| * if data was received for fixed channel before Information |
| * Response we connect channel here. |
| */ |
| check_fixed_channel(chan); |
| |
| chan->ops->recv(chan, buf); |
| net_buf_unref(buf); |
| } |
| |
| static int l2cap_br_accept(struct bt_conn *conn, struct bt_l2cap_chan **chan) |
| { |
| int i; |
| static const struct bt_l2cap_chan_ops ops = { |
| .connected = l2cap_br_connected, |
| .disconnected = l2cap_br_disconnected, |
| .recv = l2cap_br_recv, |
| }; |
| |
| LOG_DBG("conn %p handle %u", conn, conn->handle); |
| |
| for (i = 0; i < ARRAY_SIZE(bt_l2cap_br_pool); i++) { |
| struct bt_l2cap_br *l2cap = &bt_l2cap_br_pool[i]; |
| |
| if (l2cap->chan.chan.conn) { |
| continue; |
| } |
| |
| l2cap->chan.chan.ops = &ops; |
| *chan = &l2cap->chan.chan; |
| atomic_set(l2cap->chan.flags, 0); |
| return 0; |
| } |
| |
| LOG_ERR("No available L2CAP context for conn %p", conn); |
| |
| return -ENOMEM; |
| } |
| |
| BT_L2CAP_BR_CHANNEL_DEFINE(br_fixed_chan, BT_L2CAP_CID_BR_SIG, l2cap_br_accept); |
| |
| void bt_l2cap_br_init(void) |
| { |
| sys_slist_init(&br_servers); |
| |
| if (IS_ENABLED(CONFIG_BT_RFCOMM)) { |
| bt_rfcomm_init(); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_AVDTP)) { |
| bt_avdtp_init(); |
| } |
| |
| bt_sdp_init(); |
| |
| if (IS_ENABLED(CONFIG_BT_A2DP)) { |
| bt_a2dp_init(); |
| } |
| } |