| /* |
| * Copyright (c) 2022 Vestas Wind Systems A/S |
| * Copyright (c) 2019 Alexander Wachter |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| |
| #include <zephyr/device.h> |
| #include <zephyr/drivers/can.h> |
| #include <zephyr/logging/log.h> |
| #include <zephyr/shell/shell.h> |
| |
| LOG_MODULE_REGISTER(can_shell, CONFIG_CAN_LOG_LEVEL); |
| |
| struct can_shell_tx_event { |
| unsigned int frame_no; |
| int error; |
| }; |
| |
| struct can_shell_mode_mapping { |
| const char *name; |
| can_mode_t mode; |
| }; |
| |
| #define CAN_SHELL_MODE_MAPPING(_name, _mode) { .name = _name, .mode = _mode } |
| |
| static const struct can_shell_mode_mapping can_shell_mode_map[] = { |
| /* Array sorted alphabetically based on name */ |
| CAN_SHELL_MODE_MAPPING("fd", CAN_MODE_FD), |
| CAN_SHELL_MODE_MAPPING("listen-only", CAN_MODE_LISTENONLY), |
| CAN_SHELL_MODE_MAPPING("loopback", CAN_MODE_LOOPBACK), |
| CAN_SHELL_MODE_MAPPING("normal", CAN_MODE_NORMAL), |
| CAN_SHELL_MODE_MAPPING("one-shot", CAN_MODE_ONE_SHOT), |
| CAN_SHELL_MODE_MAPPING("triple-sampling", CAN_MODE_3_SAMPLES), |
| }; |
| |
| K_MSGQ_DEFINE(can_shell_tx_msgq, sizeof(struct can_shell_tx_event), |
| CONFIG_CAN_SHELL_TX_QUEUE_SIZE, 4); |
| const struct shell *can_shell_tx_msgq_sh; |
| static struct k_work_poll can_shell_tx_msgq_work; |
| static struct k_poll_event can_shell_tx_msgq_events[] = { |
| K_POLL_EVENT_STATIC_INITIALIZER(K_POLL_TYPE_MSGQ_DATA_AVAILABLE, |
| K_POLL_MODE_NOTIFY_ONLY, |
| &can_shell_tx_msgq, 0) |
| }; |
| |
| CAN_MSGQ_DEFINE(can_shell_rx_msgq, CONFIG_CAN_SHELL_RX_QUEUE_SIZE); |
| const struct shell *can_shell_rx_msgq_sh; |
| static struct k_work_poll can_shell_rx_msgq_work; |
| static struct k_poll_event can_shell_rx_msgq_events[] = { |
| K_POLL_EVENT_STATIC_INITIALIZER(K_POLL_TYPE_MSGQ_DATA_AVAILABLE, |
| K_POLL_MODE_NOTIFY_ONLY, |
| &can_shell_rx_msgq, 0) |
| }; |
| |
| /* Forward declarations */ |
| static void can_shell_tx_msgq_triggered_work_handler(struct k_work *work); |
| static void can_shell_rx_msgq_triggered_work_handler(struct k_work *work); |
| |
| static void can_shell_print_frame(const struct shell *sh, const struct can_frame *frame) |
| { |
| uint8_t nbytes = can_dlc_to_bytes(frame->dlc); |
| int i; |
| |
| #ifdef CONFIG_CAN_RX_TIMESTAMP |
| /* Timestamp */ |
| shell_fprintf(sh, SHELL_NORMAL, "(%05d) ", frame->timestamp); |
| #endif /* CONFIG_CAN_RX_TIMESTAMP */ |
| |
| #ifdef CONFIG_CAN_FD_MODE |
| /* Flags */ |
| shell_fprintf(sh, SHELL_NORMAL, "%c%c ", |
| (frame->flags & CAN_FRAME_BRS) == 0 ? '-' : 'B', |
| (frame->flags & CAN_FRAME_ESI) == 0 ? '-' : 'P'); |
| #endif /* CONFIG_CAN_FD_MODE */ |
| |
| /* CAN ID */ |
| shell_fprintf(sh, SHELL_NORMAL, "%*s%0*x ", |
| (frame->flags & CAN_FRAME_IDE) != 0 ? 0 : 5, "", |
| (frame->flags & CAN_FRAME_IDE) != 0 ? 8 : 3, |
| (frame->flags & CAN_FRAME_IDE) != 0 ? |
| frame->id & CAN_EXT_ID_MASK : frame->id & CAN_STD_ID_MASK); |
| |
| /* DLC as number of bytes */ |
| shell_fprintf(sh, SHELL_NORMAL, "%s[%0*d] ", |
| (frame->flags & CAN_FRAME_FDF) != 0 ? "" : " ", |
| (frame->flags & CAN_FRAME_FDF) != 0 ? 2 : 1, |
| nbytes); |
| |
| /* Data payload */ |
| if ((frame->flags & CAN_FRAME_RTR) != 0) { |
| shell_fprintf(sh, SHELL_NORMAL, "remote transmission request"); |
| } else { |
| for (i = 0; i < nbytes; i++) { |
| shell_fprintf(sh, SHELL_NORMAL, "%02x ", frame->data[i]); |
| } |
| } |
| |
| shell_fprintf(sh, SHELL_NORMAL, "\n"); |
| } |
| |
| static int can_shell_tx_msgq_poll_submit(const struct shell *sh) |
| { |
| int err; |
| |
| if (can_shell_tx_msgq_sh == NULL) { |
| can_shell_tx_msgq_sh = sh; |
| k_work_poll_init(&can_shell_tx_msgq_work, can_shell_tx_msgq_triggered_work_handler); |
| } |
| |
| err = k_work_poll_submit(&can_shell_tx_msgq_work, can_shell_tx_msgq_events, |
| ARRAY_SIZE(can_shell_tx_msgq_events), K_FOREVER); |
| if (err != 0) { |
| shell_error(can_shell_tx_msgq_sh, "failed to submit tx msgq polling (err %d)", |
| err); |
| } |
| |
| return err; |
| } |
| |
| static void can_shell_tx_msgq_triggered_work_handler(struct k_work *work) |
| { |
| struct can_shell_tx_event event; |
| |
| while (k_msgq_get(&can_shell_tx_msgq, &event, K_NO_WAIT) == 0) { |
| if (event.error == 0) { |
| shell_print(can_shell_tx_msgq_sh, "CAN frame #%u successfully sent", |
| event.frame_no); |
| } else { |
| shell_error(can_shell_tx_msgq_sh, "failed to send CAN frame #%u (err %d)", |
| event.frame_no, event.error); |
| } |
| } |
| |
| (void)can_shell_tx_msgq_poll_submit(can_shell_tx_msgq_sh); |
| } |
| |
| static void can_shell_tx_callback(const struct device *dev, int error, void *user_data) |
| { |
| struct can_shell_tx_event event; |
| int err; |
| |
| ARG_UNUSED(dev); |
| |
| event.frame_no = POINTER_TO_UINT(user_data); |
| event.error = error; |
| |
| err = k_msgq_put(&can_shell_tx_msgq, &event, K_NO_WAIT); |
| if (err != 0) { |
| LOG_ERR("CAN shell tx event queue full"); |
| } |
| } |
| |
| static int can_shell_rx_msgq_poll_submit(const struct shell *sh) |
| { |
| int err; |
| |
| if (can_shell_rx_msgq_sh == NULL) { |
| can_shell_rx_msgq_sh = sh; |
| k_work_poll_init(&can_shell_rx_msgq_work, can_shell_rx_msgq_triggered_work_handler); |
| } |
| |
| err = k_work_poll_submit(&can_shell_rx_msgq_work, can_shell_rx_msgq_events, |
| ARRAY_SIZE(can_shell_rx_msgq_events), K_FOREVER); |
| if (err != 0) { |
| shell_error(can_shell_rx_msgq_sh, "failed to submit rx msgq polling (err %d)", |
| err); |
| } |
| |
| return err; |
| } |
| |
| static void can_shell_rx_msgq_triggered_work_handler(struct k_work *work) |
| { |
| struct can_frame frame; |
| |
| while (k_msgq_get(&can_shell_rx_msgq, &frame, K_NO_WAIT) == 0) { |
| can_shell_print_frame(can_shell_rx_msgq_sh, &frame); |
| } |
| |
| (void)can_shell_rx_msgq_poll_submit(can_shell_rx_msgq_sh); |
| } |
| |
| static const char *can_shell_state_to_string(enum can_state state) |
| { |
| switch (state) { |
| case CAN_STATE_ERROR_ACTIVE: |
| return "error-active"; |
| case CAN_STATE_ERROR_WARNING: |
| return "error-warning"; |
| case CAN_STATE_ERROR_PASSIVE: |
| return "error-passive"; |
| case CAN_STATE_BUS_OFF: |
| return "bus-off"; |
| case CAN_STATE_STOPPED: |
| return "stopped"; |
| default: |
| return "unknown"; |
| } |
| } |
| |
| static void can_shell_print_capabilities(const struct shell *sh, can_mode_t cap) |
| { |
| int bit; |
| int i; |
| |
| for (bit = 0; bit < sizeof(cap) * 8; bit++) { |
| /* Skip unset bits */ |
| if ((cap & BIT(bit)) == 0) { |
| continue; |
| } |
| |
| /* Lookup symbolic mode name */ |
| for (i = 0; i < ARRAY_SIZE(can_shell_mode_map); i++) { |
| if (BIT(bit) == can_shell_mode_map[i].mode) { |
| shell_fprintf(sh, SHELL_NORMAL, "%s ", can_shell_mode_map[i].name); |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(can_shell_mode_map)) { |
| /* Symbolic name not found, use raw mode */ |
| shell_fprintf(sh, SHELL_NORMAL, "0x%08x ", (can_mode_t)BIT(bit)); |
| } |
| } |
| } |
| |
| static int cmd_can_start(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| int err; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| shell_print(sh, "starting %s", argv[1]); |
| |
| err = can_start(dev); |
| if (err != 0) { |
| shell_error(sh, "failed to start CAN controller (err %d)", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_can_stop(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| int err; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| shell_print(sh, "stopping %s", argv[1]); |
| |
| err = can_stop(dev); |
| if (err != 0) { |
| shell_error(sh, "failed to stop CAN controller (err %d)", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_can_show(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| const struct can_timing *timing_min; |
| const struct can_timing *timing_max; |
| struct can_bus_err_cnt err_cnt; |
| enum can_state state; |
| uint32_t max_bitrate = 0; |
| int max_std_filters = 0; |
| int max_ext_filters = 0; |
| uint32_t core_clock; |
| can_mode_t cap; |
| int err; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| err = can_get_core_clock(dev, &core_clock); |
| if (err != 0) { |
| shell_error(sh, "failed to get CAN core clock (err %d)", err); |
| return err; |
| } |
| |
| err = can_get_max_bitrate(dev, &max_bitrate); |
| if (err != 0 && err != -ENOSYS) { |
| shell_error(sh, "failed to get maximum bitrate (err %d)", err); |
| return err; |
| } |
| |
| max_std_filters = can_get_max_filters(dev, false); |
| if (max_std_filters < 0 && max_std_filters != -ENOSYS) { |
| shell_error(sh, "failed to get maximum standard (11-bit) filters (err %d)", err); |
| return err; |
| } |
| |
| max_ext_filters = can_get_max_filters(dev, true); |
| if (max_ext_filters < 0 && max_ext_filters != -ENOSYS) { |
| shell_error(sh, "failed to get maximum extended (29-bit) filters (err %d)", err); |
| return err; |
| } |
| |
| err = can_get_capabilities(dev, &cap); |
| if (err != 0) { |
| shell_error(sh, "failed to get CAN controller capabilities (err %d)", err); |
| return err; |
| } |
| |
| err = can_get_state(dev, &state, &err_cnt); |
| if (err != 0) { |
| shell_error(sh, "failed to get CAN controller state (%d)", err); |
| return err; |
| } |
| |
| shell_print(sh, "core clock: %d Hz", core_clock); |
| shell_print(sh, "max bitrate: %d bps", max_bitrate); |
| shell_print(sh, "max std filters: %d", max_std_filters); |
| shell_print(sh, "max ext filters: %d", max_ext_filters); |
| |
| shell_fprintf(sh, SHELL_NORMAL, "capabilities: normal "); |
| can_shell_print_capabilities(sh, cap); |
| shell_fprintf(sh, SHELL_NORMAL, "\n"); |
| |
| shell_print(sh, "state: %s", can_shell_state_to_string(state)); |
| shell_print(sh, "rx errors: %d", err_cnt.rx_err_cnt); |
| shell_print(sh, "tx errors: %d", err_cnt.tx_err_cnt); |
| |
| timing_min = can_get_timing_min(dev); |
| timing_max = can_get_timing_max(dev); |
| |
| shell_print(sh, "timing: sjw %u..%u, prop_seg %u..%u, " |
| "phase_seg1 %u..%u, phase_seg2 %u..%u, prescaler %u..%u", |
| timing_min->sjw, timing_max->sjw, |
| timing_min->prop_seg, timing_max->prop_seg, |
| timing_min->phase_seg1, timing_max->phase_seg1, |
| timing_min->phase_seg2, timing_max->phase_seg2, |
| timing_min->prescaler, timing_max->prescaler); |
| |
| if (IS_ENABLED(CONFIG_CAN_FD_MODE) && (cap & CAN_MODE_FD) != 0) { |
| timing_min = can_get_timing_data_min(dev); |
| timing_max = can_get_timing_data_max(dev); |
| |
| shell_print(sh, "timing data: sjw %u..%u, prop_seg %u..%u, " |
| "phase_seg1 %u..%u, phase_seg2 %u..%u, prescaler %u..%u", |
| timing_min->sjw, timing_max->sjw, |
| timing_min->prop_seg, timing_max->prop_seg, |
| timing_min->phase_seg1, timing_max->phase_seg1, |
| timing_min->phase_seg2, timing_max->phase_seg2, |
| timing_min->prescaler, timing_max->prescaler); |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_can_bitrate_set(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| struct can_timing timing = { 0 }; |
| uint16_t sample_pnt; |
| uint32_t bitrate; |
| char *endptr; |
| int err; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| bitrate = (uint32_t)strtoul(argv[2], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse bitrate"); |
| return -EINVAL; |
| } |
| |
| if (argc >= 4) { |
| sample_pnt = (uint32_t)strtoul(argv[3], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse sample point"); |
| return -EINVAL; |
| } |
| |
| err = can_calc_timing(dev, &timing, bitrate, sample_pnt); |
| if (err < 0) { |
| shell_error(sh, "failed to calculate timing for " |
| "bitrate %d bps, sample point %d.%d%% (err %d)", |
| bitrate, sample_pnt / 10, sample_pnt % 10, err); |
| return err; |
| } |
| |
| if (argc >= 5) { |
| /* Overwrite calculated default SJW with user-provided value */ |
| timing.sjw = (uint16_t)strtoul(argv[4], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse SJW"); |
| return -EINVAL; |
| } |
| } |
| |
| shell_print(sh, "setting bitrate to %d bps, sample point %d.%d%% " |
| "(+/- %d.%d%%), sjw %d", |
| bitrate, sample_pnt / 10, sample_pnt % 10, err / 10, err % 10, |
| timing.sjw); |
| |
| LOG_DBG("sjw %u, prop_seg %u, phase_seg1 %u, phase_seg2 %u, prescaler %u", |
| timing.sjw, timing.prop_seg, timing.phase_seg1, timing.phase_seg2, |
| timing.prescaler); |
| |
| err = can_set_timing(dev, &timing); |
| if (err != 0) { |
| shell_error(sh, "failed to set timing (err %d)", err); |
| return err; |
| } |
| } else { |
| shell_print(sh, "setting bitrate to %d bps", bitrate); |
| |
| err = can_set_bitrate(dev, bitrate); |
| if (err != 0) { |
| shell_error(sh, "failed to set bitrate (err %d)", err); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_can_dbitrate_set(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| struct can_timing timing = { 0 }; |
| uint16_t sample_pnt; |
| uint32_t bitrate; |
| char *endptr; |
| int err; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| bitrate = (uint32_t)strtoul(argv[2], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse data bitrate"); |
| return -EINVAL; |
| } |
| |
| if (argc >= 4) { |
| sample_pnt = (uint32_t)strtoul(argv[3], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse sample point"); |
| return -EINVAL; |
| } |
| |
| err = can_calc_timing_data(dev, &timing, bitrate, sample_pnt); |
| if (err < 0) { |
| shell_error(sh, "failed to calculate timing for " |
| "data bitrate %d bps, sample point %d.%d%% (err %d)", |
| bitrate, sample_pnt / 10, sample_pnt % 10, err); |
| return err; |
| } |
| |
| if (argc >= 5) { |
| /* Overwrite calculated default SJW with user-provided value */ |
| timing.sjw = (uint16_t)strtoul(argv[4], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse SJW"); |
| return -EINVAL; |
| } |
| } |
| |
| shell_print(sh, "setting data bitrate to %d bps, sample point %d.%d%% " |
| "(+/- %d.%d%%), sjw %d", |
| bitrate, sample_pnt / 10, sample_pnt % 10, err / 10, err % 10, |
| timing.sjw); |
| |
| LOG_DBG("sjw %u, prop_seg %u, phase_seg1 %u, phase_seg2 %u, prescaler %u", |
| timing.sjw, timing.prop_seg, timing.phase_seg1, timing.phase_seg2, |
| timing.prescaler); |
| |
| err = can_set_timing_data(dev, &timing); |
| if (err != 0) { |
| shell_error(sh, "failed to set data timing (err %d)", err); |
| return err; |
| } |
| } else { |
| shell_print(sh, "setting data bitrate to %d bps", bitrate); |
| |
| err = can_set_bitrate_data(dev, bitrate); |
| if (err != 0) { |
| shell_error(sh, "failed to set data bitrate (err %d)", err); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_can_mode_set(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| can_mode_t mode = CAN_MODE_NORMAL; |
| can_mode_t raw; |
| char *endptr; |
| int err; |
| int i; |
| int j; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| for (i = 2; i < argc; i++) { |
| /* Lookup symbolic mode name */ |
| for (j = 0; j < ARRAY_SIZE(can_shell_mode_map); j++) { |
| if (strcmp(argv[i], can_shell_mode_map[j].name) == 0) { |
| mode |= can_shell_mode_map[j].mode; |
| break; |
| } |
| } |
| |
| if (j == ARRAY_SIZE(can_shell_mode_map)) { |
| /* Symbolic name not found, use raw mode if hex number */ |
| raw = (can_mode_t)strtoul(argv[i], &endptr, 16); |
| if (*endptr == '\0') { |
| mode |= raw; |
| continue; |
| } |
| |
| shell_error(sh, "failed to parse mode"); |
| return -EINVAL; |
| } |
| } |
| |
| shell_print(sh, "setting mode 0x%08x", mode); |
| |
| err = can_set_mode(dev, mode); |
| if (err != 0) { |
| shell_error(sh, "failed to set mode 0x%08x (err %d)", mode, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_can_send(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| static unsigned int frame_counter; |
| unsigned int frame_no; |
| struct can_frame frame; |
| uint32_t max_id; |
| int argidx = 2; |
| uint32_t val; |
| char *endptr; |
| int nbytes; |
| int err; |
| int i; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| /* Defaults */ |
| max_id = CAN_MAX_STD_ID; |
| frame.flags = 0; |
| frame.dlc = 0; |
| |
| /* Parse options */ |
| while (argidx < argc && strncmp(argv[argidx], "-", 1) == 0) { |
| if (strcmp(argv[argidx], "--") == 0) { |
| argidx++; |
| break; |
| } else if (strcmp(argv[argidx], "-e") == 0) { |
| frame.flags |= CAN_FRAME_IDE; |
| max_id = CAN_MAX_EXT_ID; |
| argidx++; |
| } else if (strcmp(argv[argidx], "-r") == 0) { |
| frame.flags |= CAN_FRAME_RTR; |
| argidx++; |
| } else if (strcmp(argv[argidx], "-f") == 0) { |
| frame.flags |= CAN_FRAME_FDF; |
| argidx++; |
| } else if (strcmp(argv[argidx], "-b") == 0) { |
| frame.flags |= CAN_FRAME_BRS; |
| argidx++; |
| } else { |
| shell_error(sh, "unsupported option %s", argv[argidx]); |
| shell_help(sh); |
| return SHELL_CMD_HELP_PRINTED; |
| } |
| } |
| |
| /* Parse CAN ID */ |
| if (argidx >= argc) { |
| shell_error(sh, "missing CAN ID parameter"); |
| shell_help(sh); |
| return SHELL_CMD_HELP_PRINTED; |
| } |
| |
| val = (uint32_t)strtoul(argv[argidx++], &endptr, 16); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse CAN ID"); |
| return -EINVAL; |
| } |
| |
| if (val > max_id) { |
| shell_error(sh, "CAN ID 0x%0*x out of range", |
| (frame.flags & CAN_FRAME_IDE) != 0 ? 8 : 3, |
| val); |
| return -EINVAL; |
| } |
| |
| frame.id = val; |
| |
| nbytes = argc - argidx; |
| if (nbytes > ARRAY_SIZE(frame.data)) { |
| shell_error(sh, "excessive amount of data (%d bytes)", nbytes); |
| return -EINVAL; |
| } |
| |
| frame.dlc = can_bytes_to_dlc(nbytes); |
| |
| /* Parse data */ |
| for (i = 0; i < nbytes; i++) { |
| val = (uint32_t)strtoul(argv[argidx++], &endptr, 16); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse data %s", argv[argidx++]); |
| return -EINVAL; |
| } |
| |
| if (val > 0xff) { |
| shell_error(sh, "data 0x%x out of range", val); |
| return -EINVAL; |
| } |
| |
| frame.data[i] = val; |
| } |
| |
| err = can_shell_tx_msgq_poll_submit(sh); |
| if (err != 0) { |
| return err; |
| } |
| |
| frame_no = frame_counter++; |
| |
| shell_print(sh, "enqueuing CAN frame #%u with %s (%d-bit) CAN ID 0x%0*x, " |
| "RTR %d, CAN-FD %d, BRS %d, DLC %d", frame_no, |
| (frame.flags & CAN_FRAME_IDE) != 0 ? "extended" : "standard", |
| (frame.flags & CAN_FRAME_IDE) != 0 ? 29 : 11, |
| (frame.flags & CAN_FRAME_IDE) != 0 ? 8 : 3, frame.id, |
| (frame.flags & CAN_FRAME_RTR) != 0 ? 1 : 0, |
| (frame.flags & CAN_FRAME_FDF) != 0 ? 1 : 0, |
| (frame.flags & CAN_FRAME_BRS) != 0 ? 1 : 0, |
| can_dlc_to_bytes(frame.dlc)); |
| |
| err = can_send(dev, &frame, K_NO_WAIT, can_shell_tx_callback, UINT_TO_POINTER(frame_no)); |
| if (err != 0) { |
| shell_error(sh, "failed to enqueue CAN frame #%u (err %d)", frame_no, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_can_filter_add(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| struct can_filter filter; |
| uint32_t max_id; |
| int argidx = 2; |
| uint32_t val; |
| char *endptr; |
| int err; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| /* Defaults */ |
| max_id = CAN_MAX_STD_ID; |
| filter.flags = CAN_FILTER_DATA; |
| |
| /* Parse options */ |
| while (argidx < argc && strncmp(argv[argidx], "-", 1) == 0) { |
| if (strcmp(argv[argidx], "--") == 0) { |
| argidx++; |
| break; |
| } else if (strcmp(argv[argidx], "-e") == 0) { |
| filter.flags |= CAN_FILTER_IDE; |
| max_id = CAN_MAX_EXT_ID; |
| argidx++; |
| } else if (strcmp(argv[argidx], "-f") == 0) { |
| filter.flags |= CAN_FILTER_FDF; |
| argidx++; |
| } else if (strcmp(argv[argidx], "-r") == 0) { |
| filter.flags |= CAN_FILTER_RTR; |
| argidx++; |
| } else if (strcmp(argv[argidx], "-R") == 0) { |
| filter.flags &= ~(CAN_FILTER_DATA); |
| filter.flags |= CAN_FILTER_RTR; |
| argidx++; |
| } else { |
| shell_error(sh, "unsupported argument %s", argv[argidx]); |
| shell_help(sh); |
| return SHELL_CMD_HELP_PRINTED; |
| } |
| } |
| |
| /* Parse CAN ID */ |
| if (argidx >= argc) { |
| shell_error(sh, "missing CAN ID parameter"); |
| shell_help(sh); |
| return SHELL_CMD_HELP_PRINTED; |
| } |
| |
| val = (uint32_t)strtoul(argv[argidx++], &endptr, 16); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse CAN ID"); |
| return -EINVAL; |
| } |
| |
| if (val > max_id) { |
| shell_error(sh, "CAN ID 0x%0*x out of range", |
| (filter.flags & CAN_FILTER_IDE) != 0 ? 8 : 3, |
| val); |
| return -EINVAL; |
| } |
| |
| filter.id = val; |
| |
| if (argidx < argc) { |
| /* Parse CAN ID mask */ |
| val = (uint32_t)strtoul(argv[argidx++], &endptr, 16); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse CAN ID mask"); |
| return -EINVAL; |
| } |
| |
| if (val > max_id) { |
| shell_error(sh, "CAN ID mask 0x%0*x out of range", |
| (filter.flags & CAN_FILTER_IDE) != 0 ? 8 : 3, |
| val); |
| return -EINVAL; |
| } |
| |
| } else { |
| val = max_id; |
| } |
| |
| filter.mask = val; |
| |
| err = can_shell_rx_msgq_poll_submit(sh); |
| if (err != 0) { |
| return err; |
| } |
| |
| shell_print(sh, "adding filter with %s (%d-bit) CAN ID 0x%0*x, " |
| "CAN ID mask 0x%0*x, data frames %d, RTR frames %d, CAN-FD frames %d", |
| (filter.flags & CAN_FILTER_IDE) != 0 ? "extended" : "standard", |
| (filter.flags & CAN_FILTER_IDE) != 0 ? 29 : 11, |
| (filter.flags & CAN_FILTER_IDE) != 0 ? 8 : 3, filter.id, |
| (filter.flags & CAN_FILTER_IDE) != 0 ? 8 : 3, filter.mask, |
| (filter.flags & CAN_FILTER_DATA) != 0 ? 1 : 0, |
| (filter.flags & CAN_FILTER_RTR) != 0 ? 1 : 0, |
| (filter.flags & CAN_FILTER_FDF) != 0 ? 1 : 0); |
| |
| err = can_add_rx_filter_msgq(dev, &can_shell_rx_msgq, &filter); |
| if (err < 0) { |
| shell_error(sh, "failed to add filter (err %d)", err); |
| return err; |
| } |
| |
| shell_print(sh, "filter ID: %d", err); |
| |
| return 0; |
| } |
| |
| static int cmd_can_filter_remove(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| int filter_id; |
| char *endptr; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| /* Parse filter ID */ |
| filter_id = (int)strtol(argv[2], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse filter ID"); |
| return -EINVAL; |
| } |
| |
| shell_print(sh, "removing filter with ID %d", filter_id); |
| can_remove_rx_filter(dev, filter_id); |
| |
| return 0; |
| } |
| |
| static int cmd_can_recover(const struct shell *sh, size_t argc, char **argv) |
| { |
| const struct device *dev = device_get_binding(argv[1]); |
| k_timeout_t timeout = K_FOREVER; |
| int millisec; |
| char *endptr; |
| int err; |
| |
| if (!device_is_ready(dev)) { |
| shell_error(sh, "device %s not ready", argv[1]); |
| return -ENODEV; |
| } |
| |
| if (argc >= 3) { |
| /* Parse timeout */ |
| millisec = (int)strtol(argv[2], &endptr, 10); |
| if (*endptr != '\0') { |
| shell_error(sh, "failed to parse timeout"); |
| return -EINVAL; |
| } |
| |
| timeout = K_MSEC(millisec); |
| shell_print(sh, "recovering, timeout %d ms", millisec); |
| } else { |
| shell_print(sh, "recovering, no timeout"); |
| } |
| |
| err = can_recover(dev, timeout); |
| if (err != 0) { |
| shell_error(sh, "failed to recover CAN controller from bus-off (err %d)", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void cmd_can_device_name(size_t idx, struct shell_static_entry *entry) |
| { |
| const struct device *dev = shell_device_lookup(idx, NULL); |
| |
| entry->syntax = (dev != NULL) ? dev->name : NULL; |
| entry->handler = NULL; |
| entry->help = NULL; |
| entry->subcmd = NULL; |
| } |
| |
| SHELL_DYNAMIC_CMD_CREATE(dsub_can_device_name, cmd_can_device_name); |
| |
| static void cmd_can_mode(size_t idx, struct shell_static_entry *entry); |
| |
| SHELL_DYNAMIC_CMD_CREATE(dsub_can_mode, cmd_can_mode); |
| |
| static void cmd_can_mode(size_t idx, struct shell_static_entry *entry) |
| { |
| if (idx < ARRAY_SIZE(can_shell_mode_map)) { |
| entry->syntax = can_shell_mode_map[idx].name; |
| |
| } else { |
| entry->syntax = NULL; |
| } |
| |
| entry->handler = NULL; |
| entry->help = NULL; |
| entry->subcmd = &dsub_can_mode; |
| } |
| |
| static void cmd_can_device_name_mode(size_t idx, struct shell_static_entry *entry) |
| { |
| const struct device *dev = shell_device_lookup(idx, NULL); |
| |
| entry->syntax = (dev != NULL) ? dev->name : NULL; |
| entry->handler = NULL; |
| entry->help = NULL; |
| entry->subcmd = &dsub_can_mode; |
| } |
| |
| SHELL_DYNAMIC_CMD_CREATE(dsub_can_device_name_mode, cmd_can_device_name_mode); |
| |
| SHELL_STATIC_SUBCMD_SET_CREATE(sub_can_filter_cmds, |
| SHELL_CMD_ARG(add, &dsub_can_device_name, |
| "Add rx filter\n" |
| "Usage: can filter add <device> [-e] [-f] [-r] [-R] <CAN ID> [CAN ID mask]\n" |
| "-e use extended (29-bit) CAN ID/CAN ID mask\n" |
| "-f match CAN-FD format frames\n" |
| "-r also match Remote Transmission Request (RTR) frames\n" |
| "-R only match Remote Transmission Request (RTR) frames", |
| cmd_can_filter_add, 3, 5), |
| SHELL_CMD_ARG(remove, &dsub_can_device_name, |
| "Remove rx filter\n" |
| "Usage: can filter remove <device> <filter_id>", |
| cmd_can_filter_remove, 3, 0), |
| SHELL_SUBCMD_SET_END |
| ); |
| |
| SHELL_STATIC_SUBCMD_SET_CREATE(sub_can_cmds, |
| SHELL_CMD_ARG(start, &dsub_can_device_name, |
| "Start CAN controller\n" |
| "Usage: can start <device>", |
| cmd_can_start, 2, 0), |
| SHELL_CMD_ARG(stop, &dsub_can_device_name, |
| "Stop CAN controller\n" |
| "Usage: can stop <device>", |
| cmd_can_stop, 2, 0), |
| SHELL_CMD_ARG(show, &dsub_can_device_name, |
| "Show CAN controller information\n" |
| "Usage: can show <device>", |
| cmd_can_show, 2, 0), |
| SHELL_CMD_ARG(bitrate, &dsub_can_device_name, |
| "Set CAN controller bitrate (sample point and SJW optional)\n" |
| "Usage: can bitrate <device> <bitrate> [sample point] [sjw]", |
| cmd_can_bitrate_set, 3, 2), |
| SHELL_COND_CMD_ARG(CONFIG_CAN_FD_MODE, |
| dbitrate, &dsub_can_device_name, |
| "Set CAN controller data phase bitrate (sample point and SJW optional)\n" |
| "Usage: can dbitrate <device> <data phase bitrate> [sample point] [sjw]", |
| cmd_can_dbitrate_set, 3, 2), |
| SHELL_CMD_ARG(mode, &dsub_can_device_name_mode, |
| "Set CAN controller mode\n" |
| "Usage: can mode <device> <mode> [mode] [mode] [...]", |
| cmd_can_mode_set, 3, SHELL_OPT_ARG_CHECK_SKIP), |
| SHELL_CMD_ARG(send, &dsub_can_device_name, |
| "Enqueue a CAN frame for sending\n" |
| "Usage: can send <device> [-e] [-r] [-f] [-b] <CAN ID> [data] [...]\n" |
| "-e use extended (29-bit) CAN ID\n" |
| "-r send Remote Transmission Request (RTR) frame\n" |
| "-f use CAN-FD frame format\n" |
| "-b use CAN-FD Bit Rate Switching (BRS)", |
| cmd_can_send, 3, SHELL_OPT_ARG_CHECK_SKIP), |
| SHELL_CMD(filter, &sub_can_filter_cmds, |
| "CAN rx filter commands\n" |
| "Usage: can filter <add|remove> <device> ...", |
| NULL), |
| SHELL_EXPR_CMD_ARG(!IS_ENABLED(CONFIG_CAN_AUTO_BUS_OFF_RECOVERY), |
| recover, &dsub_can_device_name, |
| "Recover CAN controller from bus-off state\n" |
| "Usage: can recover <device> [timeout ms]", |
| cmd_can_recover, 2, 1), |
| SHELL_SUBCMD_SET_END |
| ); |
| |
| SHELL_CMD_REGISTER(can, &sub_can_cmds, "CAN controller commands", NULL); |