| /* |
| * Copyright (c) 2020, Bernhard Kraemer |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include "teensy40.dts" |
| |
| / { |
| model = "PJRC TEENSY 4.1 board"; |
| |
| chosen { |
| zephyr,flash-controller = &w25q64jvxgim; |
| zephyr,flash = &w25q64jvxgim; |
| }; |
| }; |
| |
| /delete-node/ &w25q16jvuxim; |
| &flexspi { |
| status = "okay"; |
| |
| reg = <0x402a8000 0x4000>, <0x60000000 DT_SIZE_M(8)>; |
| /* WINBOND flash memory*/ |
| w25q64jvxgim: w25q64jvxgim@0 { |
| compatible = "nxp,imx-flexspi-nor"; |
| size = <DT_SIZE_M(8 * 8)>; |
| reg = <0>; |
| spi-max-frequency = <DT_FREQ_M(133)>; |
| status = "okay"; |
| jedec-id = [ef 70 17]; |
| |
| erase-block-size = <4096>; |
| write-block-size = <1>; |
| }; |
| }; |
| |
| &enet_mac { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_enet>; |
| pinctrl-names = "default"; |
| nxp,unique-mac; |
| phy-connection-type = "rmii"; |
| phy-handle = <&phy>; |
| }; |
| |
| &enet_mdio { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_enet_mdio>; |
| pinctrl-names = "default"; |
| phy: phy@0 { |
| status = "okay"; |
| compatible = "ti,dp83825"; |
| reg = <0>; |
| reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; |
| int-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; |
| ti,interface-type = "rmii"; |
| }; |
| }; |
| |
| &lpspi3 { |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| status = "okay"; |
| no-1-8-v; |
| pinctrl-0 = <&pinmux_usdhc1>; |
| pinctrl-1 = <&pinmux_usdhc1_slow>; |
| pinctrl-2 = <&pinmux_usdhc1_med>; |
| pinctrl-3 = <&pinmux_usdhc1_fast>; |
| pinctrl-names = "default", "slow", "med", "fast"; |
| mmc { |
| compatible = "zephyr,sdmmc-disk"; |
| disk-name = "SD"; |
| status = "okay"; |
| }; |
| }; |