drivers/i2c/i2c_cc13xx_cc26xx.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2019 Brett Witherspoon
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #define DT_DRV_COMPAT ti_cc13xx_cc26xx_i2c

 #include <kernel.h>
 #include <drivers/i2c.h>
 #include <pm/device.h>
 #include <pm/pm.h>

 #define LOG_LEVEL CONFIG_I2C_LOG_LEVEL
 #include <logging/log.h>
 LOG_MODULE_REGISTER(i2c_cc13xx_cc26xx);

 #include <driverlib/i2c.h>
 #include <driverlib/ioc.h>
 #include <driverlib/prcm.h>

 #include <ti/drivers/Power.h>
 #include <ti/drivers/power/PowerCC26X2.h>

 #include "i2c-priv.h"

 struct i2c_cc13xx_cc26xx_data {
 	struct k_sem lock;
 	struct k_sem complete;
 	volatile uint32_t error;
 #ifdef CONFIG_PM
 	Power_NotifyObj postNotify;
 	uint32_t dev_config;
 #endif
 };

 struct i2c_cc13xx_cc26xx_config {
 	uint32_t base;
 	uint32_t scl_pin;
 	uint32_t sda_pin;
 };

 static inline struct i2c_cc13xx_cc26xx_data *get_dev_data(const struct device *dev)
 {
 	return dev->data;
 }

 static inline const struct i2c_cc13xx_cc26xx_config *
 get_dev_config(const struct device *dev)
 {
 	return dev->config;
 }

 static int i2c_cc13xx_cc26xx_transmit(const struct device *dev,
 				      const uint8_t *buf,
 				      uint32_t len, uint16_t addr)
 {
 	const uint32_t base = get_dev_config(dev)->base;
 	struct i2c_cc13xx_cc26xx_data *data = get_dev_data(dev);

 	/* Sending address without data is not supported */
 	if (len == 0) {
 		return -EIO;
 	}

 	I2CMasterSlaveAddrSet(base, addr, false);

 	/* The following assumes a single master. Use I2CMasterBusBusy() if
 	 * wanting to implement multiple master support.
 	 */

 	/* Single transmission */
 	if (len == 1) {
 		I2CMasterDataPut(base, *buf);

 		I2CMasterControl(base, I2C_MASTER_CMD_SINGLE_SEND);

 		k_sem_take(&data->complete, K_FOREVER);

 		return data->error == I2C_MASTER_ERR_NONE ? 0 : -EIO;
 	}

 	/* Burst transmission */
 	I2CMasterDataPut(base, buf[0]);

 	I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_START);

 	k_sem_take(&data->complete, K_FOREVER);

 	if (data->error != I2C_MASTER_ERR_NONE) {
 		goto send_error_stop;
 	}

 	for (int i = 1; i < len - 1; i++) {
 		I2CMasterDataPut(base, buf[i]);

 		I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_CONT);

 		k_sem_take(&data->complete, K_FOREVER);

 		if (data->error != I2C_MASTER_ERR_NONE) {
 			goto send_error_stop;
 		}
 	}

 	I2CMasterDataPut(base, buf[len - 1]);

 	I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_FINISH);

 	k_sem_take(&data->complete, K_FOREVER);

 	if (data->error != I2C_MASTER_ERR_NONE) {
 		return -EIO;
 	}

 	return 0;

 send_error_stop:
 	I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_ERROR_STOP);
 	return -EIO;
 }

 static int i2c_cc13xx_cc26xx_receive(const struct device *dev, uint8_t *buf,
 				     uint32_t len,
 				     uint16_t addr)
 {
 	const uint32_t base = get_dev_config(dev)->base;
 	struct i2c_cc13xx_cc26xx_data *data = get_dev_data(dev);

 	/* Sending address without data is not supported */
 	if (len == 0) {
 		return -EIO;
 	}

 	I2CMasterSlaveAddrSet(base, addr, true);

 	/* The following assumes a single master. Use I2CMasterBusBusy() if
 	 * wanting to implement multiple master support.
 	 */

 	/* Single receive */
 	if (len == 1) {
 		I2CMasterControl(base, I2C_MASTER_CMD_SINGLE_RECEIVE);

 		k_sem_take(&data->complete, K_FOREVER);

 		if (data->error != I2C_MASTER_ERR_NONE) {
 			return -EIO;
 		}

 		*buf = I2CMasterDataGet(base);

 		return 0;
 	}

 	/* Burst receive */
 	I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_START);

 	k_sem_take(&data->complete, K_FOREVER);

 	if (data->error != I2C_MASTER_ERR_NONE) {
 		goto recv_error_stop;
 	}

 	buf[0] = I2CMasterDataGet(base);

 	for (int i = 1; i < len - 1; i++) {
 		I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_CONT);

 		k_sem_take(&data->complete, K_FOREVER);

 		if (data->error != I2C_MASTER_ERR_NONE) {
 			goto recv_error_stop;
 		}

 		buf[i] = I2CMasterDataGet(base);
 	}

 	I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);

 	k_sem_take(&data->complete, K_FOREVER);

 	if (data->error != I2C_MASTER_ERR_NONE) {
 		return -EIO;
 	}

 	buf[len - 1] = I2CMasterDataGet(base);

 	return 0;

 recv_error_stop:
 	I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP);
 	return -EIO;
 }

 static int i2c_cc13xx_cc26xx_transfer(const struct device *dev,
 				      struct i2c_msg *msgs,
 				      uint8_t num_msgs, uint16_t addr)
 {
 	int ret = 0;

 	if (num_msgs == 0) {
 		return 0;
 	}

 	k_sem_take(&get_dev_data(dev)->lock, K_FOREVER);

 #ifdef CONFIG_PM
 	pm_constraint_set(PM_STATE_STANDBY);
 #endif

 	for (int i = 0; i < num_msgs; i++) {
 		/* Not supported by hardware */
 		if (msgs[i].flags & I2C_MSG_ADDR_10_BITS) {
 			ret = -EIO;
 			break;
 		}

 		if ((msgs[i].flags & I2C_MSG_RW_MASK) == I2C_MSG_WRITE) {
 			ret = i2c_cc13xx_cc26xx_transmit(dev, msgs[i].buf,
 							 msgs[i].len, addr);
 		} else {
 			ret = i2c_cc13xx_cc26xx_receive(dev, msgs[i].buf,
 							msgs[i].len, addr);
 		}

 		if (ret) {
 			break;
 		}
 	}

 #ifdef CONFIG_PM
 	pm_constraint_release(PM_STATE_STANDBY);
 #endif

 	k_sem_give(&get_dev_data(dev)->lock);

 	return ret;
 }

 #define CPU_FREQ DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
 static int i2c_cc13xx_cc26xx_configure(const struct device *dev,
 				       uint32_t dev_config)
 {
 	bool fast;

 	switch (I2C_SPEED_GET(dev_config)) {
 	case I2C_SPEED_STANDARD:
 		fast = false;
 		break;
 	case I2C_SPEED_FAST:
 		fast = true;
 		break;
 	default:
 		LOG_ERR("Unsupported speed");
 		return -EIO;
 	}

 	/* Support for slave mode has not been implemented */
 	if (!(dev_config & I2C_MODE_MASTER)) {
 		LOG_ERR("Slave mode is not supported");
 		return -EIO;
 	}

 	/* This is deprecated and could be ignored in the future */
 	if (dev_config & I2C_ADDR_10_BITS) {
 		LOG_ERR("10-bit addressing mode is not supported");
 		return -EIO;
 	}

 	/* Enables and configures I2C master */
 	I2CMasterInitExpClk(get_dev_config(dev)->base, CPU_FREQ, fast);

 #ifdef CONFIG_PM
 	get_dev_data(dev)->dev_config = dev_config;
 #endif

 	return 0;
 }

 static void i2c_cc13xx_cc26xx_isr(const void *arg)
 {
 	const uint32_t base = get_dev_config(arg)->base;
 	struct i2c_cc13xx_cc26xx_data *data = get_dev_data(arg);

 	if (I2CMasterIntStatus(base, true)) {
 		I2CMasterIntClear(base);

 		data->error = I2CMasterErr(base);

 		k_sem_give(&data->complete);
 	}
 }

 #ifdef CONFIG_PM
 /*
  *  ======== postNotifyFxn ========
  *  Called by Power module when waking up the CPU from Standby. The i2c needs
  *  to be reconfigured afterwards, unless Zephyr's device PM turned it off, in
  *  which case it'd be responsible for turning it back on and reconfigure it.
  */
 static int postNotifyFxn(unsigned int eventType, uintptr_t eventArg,
 	uintptr_t clientArg)
 {
 	const struct device *dev = (const struct device *)clientArg;
 	int ret = Power_NOTIFYDONE;
 	int16_t res_id;

 	/* Reconfigure the hardware if returning from sleep */
 	if (eventType == PowerCC26XX_AWAKE_STANDBY) {
 		res_id = PowerCC26XX_PERIPH_I2C0;

 		if (Power_getDependencyCount(res_id) != 0) {
 			/* Reconfigure and enable I2C only if powered */
 			if (i2c_cc13xx_cc26xx_configure(dev,
 				get_dev_data(dev)->dev_config) != 0) {
 				ret = Power_NOTIFYERROR;
 			}

 			I2CMasterIntEnable(get_dev_config(dev)->base);
 		}
 	}

 	return (ret);
 }
 #endif

 #ifdef CONFIG_PM_DEVICE
 static int i2c_cc13xx_cc26xx_pm_action(const struct device *dev,
 				       enum pm_device_action action)
 {
 	int ret = 0;

 	switch (action) {
 	case PM_DEVICE_ACTION_RESUME:
 		Power_setDependency(PowerCC26XX_PERIPH_I2C0);
 		IOCPinTypeI2c(get_dev_config(dev)->base,
 			get_dev_config(dev)->sda_pin,
 			get_dev_config(dev)->scl_pin);
 		ret = i2c_cc13xx_cc26xx_configure(dev,
 			get_dev_data(dev)->dev_config);
 		if (ret == 0) {
 			I2CMasterIntEnable(get_dev_config(dev)->base);
 		}
 		break;
 	case PM_DEVICE_ACTION_SUSPEND:
 		I2CMasterIntDisable(get_dev_config(dev)->base);
 		I2CMasterDisable(get_dev_config(dev)->base);
 		/* Reset pin type to default GPIO configuration */
 		IOCPortConfigureSet(get_dev_config(dev)->scl_pin,
 			IOC_PORT_GPIO, IOC_STD_OUTPUT);
 		IOCPortConfigureSet(get_dev_config(dev)->sda_pin,
 			IOC_PORT_GPIO, IOC_STD_OUTPUT);
 		Power_releaseDependency(PowerCC26XX_PERIPH_I2C0);
 		break;
 	default:
 		return -ENOTSUP;
 	}

 	return ret;
 }
 #endif /* CONFIG_PM_DEVICE */

 static int i2c_cc13xx_cc26xx_init(const struct device *dev)
 {
 	uint32_t cfg;
 	int err;

 #ifdef CONFIG_PM
 	/* Set Power dependencies & constraints */
 	Power_setDependency(PowerCC26XX_PERIPH_I2C0);

 	/* Register notification function */
 	Power_registerNotify(&get_dev_data(dev)->postNotify,
 		PowerCC26XX_AWAKE_STANDBY,
 		postNotifyFxn, (uintptr_t)dev);
 #else
 	/* Enable I2C power domain */
 	PRCMPowerDomainOn(PRCM_DOMAIN_SERIAL);

 	/* Enable I2C peripheral clock */
 	PRCMPeripheralRunEnable(PRCM_PERIPH_I2C0);
 	/* Enable in sleep mode until proper power management is added */
 	PRCMPeripheralSleepEnable(PRCM_PERIPH_I2C0);
 	PRCMPeripheralDeepSleepEnable(PRCM_PERIPH_I2C0);

 	/* Load PRCM settings */
 	PRCMLoadSet();
 	while (!PRCMLoadGet()) {
 		continue;
 	}

 	/* I2C should not be accessed until power domain is on. */
 	while (PRCMPowerDomainStatus(PRCM_DOMAIN_SERIAL) !=
 	       PRCM_DOMAIN_POWER_ON) {
 		continue;
 	}
 #endif

 	IRQ_CONNECT(DT_INST_IRQN(0),
 		    DT_INST_IRQ(0, priority),
 		    i2c_cc13xx_cc26xx_isr, DEVICE_DT_INST_GET(0), 0);
 	irq_enable(DT_INST_IRQN(0));

 	/* Configure IOC module to route SDA and SCL signals */
 	IOCPinTypeI2c(get_dev_config(dev)->base, get_dev_config(dev)->sda_pin,
 		      get_dev_config(dev)->scl_pin);

 	cfg = i2c_map_dt_bitrate(DT_INST_PROP(0, clock_frequency));
 	err = i2c_cc13xx_cc26xx_configure(dev, cfg | I2C_MODE_MASTER);
 	if (err) {
 		LOG_ERR("Failed to configure");
 		return err;
 	}

 	I2CMasterIntEnable(get_dev_config(dev)->base);

 	return 0;
 }

 static const struct i2c_driver_api i2c_cc13xx_cc26xx_driver_api = {
 	.configure = i2c_cc13xx_cc26xx_configure,
 	.transfer = i2c_cc13xx_cc26xx_transfer
 };

 static const struct i2c_cc13xx_cc26xx_config i2c_cc13xx_cc26xx_config = {
 	.base = DT_INST_REG_ADDR(0),
 	.sda_pin = DT_INST_PROP(0, sda_pin),
 	.scl_pin = DT_INST_PROP(0, scl_pin)
 };

 static struct i2c_cc13xx_cc26xx_data i2c_cc13xx_cc26xx_data = {
 	.lock = Z_SEM_INITIALIZER(i2c_cc13xx_cc26xx_data.lock, 1, 1),
 	.complete = Z_SEM_INITIALIZER(i2c_cc13xx_cc26xx_data.complete, 0, 1),
 	.error = I2C_MASTER_ERR_NONE
 };

 PM_DEVICE_DT_INST_DEFINE(0, i2c_cc13xx_cc26xx_pm_action);

 I2C_DEVICE_DT_INST_DEFINE(0,
 		i2c_cc13xx_cc26xx_init,
 		PM_DEVICE_DT_INST_REF(0),
 		&i2c_cc13xx_cc26xx_data, &i2c_cc13xx_cc26xx_config,
 		POST_KERNEL, CONFIG_I2C_INIT_PRIORITY,
 		&i2c_cc13xx_cc26xx_driver_api);
	/*
	* Copyright (c) 2019 Brett Witherspoon
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#define DT_DRV_COMPAT ti_cc13xx_cc26xx_i2c

	#include <kernel.h>
	#include <drivers/i2c.h>
	#include <pm/device.h>
	#include <pm/pm.h>

	#define LOG_LEVEL CONFIG_I2C_LOG_LEVEL
	#include <logging/log.h>
	LOG_MODULE_REGISTER(i2c_cc13xx_cc26xx);

	#include <driverlib/i2c.h>
	#include <driverlib/ioc.h>
	#include <driverlib/prcm.h>

	#include <ti/drivers/Power.h>
	#include <ti/drivers/power/PowerCC26X2.h>

	#include "i2c-priv.h"

	struct i2c_cc13xx_cc26xx_data {
	struct k_sem lock;
	struct k_sem complete;
	volatile uint32_t error;
	#ifdef CONFIG_PM
	Power_NotifyObj postNotify;
	uint32_t dev_config;
	#endif
	};

	struct i2c_cc13xx_cc26xx_config {
	uint32_t base;
	uint32_t scl_pin;
	uint32_t sda_pin;
	};

	static inline struct i2c_cc13xx_cc26xx_data get_dev_data(const struct device dev)
	{
	return dev->data;
	}

	static inline const struct i2c_cc13xx_cc26xx_config *
	get_dev_config(const struct device *dev)
	{
	return dev->config;
	}

	static int i2c_cc13xx_cc26xx_transmit(const struct device *dev,
	const uint8_t *buf,
	uint32_t len, uint16_t addr)
	{
	const uint32_t base = get_dev_config(dev)->base;
	struct i2c_cc13xx_cc26xx_data *data = get_dev_data(dev);

	/* Sending address without data is not supported */
	if (len == 0) {
	return -EIO;
	}

	I2CMasterSlaveAddrSet(base, addr, false);

	/* The following assumes a single master. Use I2CMasterBusBusy() if
	* wanting to implement multiple master support.
	*/

	/* Single transmission */
	if (len == 1) {
	I2CMasterDataPut(base, *buf);

	I2CMasterControl(base, I2C_MASTER_CMD_SINGLE_SEND);

	k_sem_take(&data->complete, K_FOREVER);

	return data->error == I2C_MASTER_ERR_NONE ? 0 : -EIO;
	}

	/* Burst transmission */
	I2CMasterDataPut(base, buf[0]);

	I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_START);

	k_sem_take(&data->complete, K_FOREVER);

	if (data->error != I2C_MASTER_ERR_NONE) {
	goto send_error_stop;
	}

	for (int i = 1; i < len - 1; i++) {
	I2CMasterDataPut(base, buf[i]);

	I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_CONT);

	k_sem_take(&data->complete, K_FOREVER);

	if (data->error != I2C_MASTER_ERR_NONE) {
	goto send_error_stop;
	}
	}

	I2CMasterDataPut(base, buf[len - 1]);

	I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_FINISH);

	k_sem_take(&data->complete, K_FOREVER);

	if (data->error != I2C_MASTER_ERR_NONE) {
	return -EIO;
	}

	return 0;

	send_error_stop:
	I2CMasterControl(base, I2C_MASTER_CMD_BURST_SEND_ERROR_STOP);
	return -EIO;
	}

	static int i2c_cc13xx_cc26xx_receive(const struct device dev, uint8_t buf,
	uint32_t len,
	uint16_t addr)
	{
	const uint32_t base = get_dev_config(dev)->base;
	struct i2c_cc13xx_cc26xx_data *data = get_dev_data(dev);

	/* Sending address without data is not supported */
	if (len == 0) {
	return -EIO;
	}

	I2CMasterSlaveAddrSet(base, addr, true);

	/* The following assumes a single master. Use I2CMasterBusBusy() if
	* wanting to implement multiple master support.
	*/

	/* Single receive */
	if (len == 1) {
	I2CMasterControl(base, I2C_MASTER_CMD_SINGLE_RECEIVE);

	k_sem_take(&data->complete, K_FOREVER);

	if (data->error != I2C_MASTER_ERR_NONE) {
	return -EIO;
	}

	*buf = I2CMasterDataGet(base);

	return 0;
	}

	/* Burst receive */
	I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_START);

	k_sem_take(&data->complete, K_FOREVER);

	if (data->error != I2C_MASTER_ERR_NONE) {
	goto recv_error_stop;
	}

	buf[0] = I2CMasterDataGet(base);

	for (int i = 1; i < len - 1; i++) {
	I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_CONT);

	k_sem_take(&data->complete, K_FOREVER);

	if (data->error != I2C_MASTER_ERR_NONE) {
	goto recv_error_stop;
	}

	buf[i] = I2CMasterDataGet(base);
	}

	I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);

	k_sem_take(&data->complete, K_FOREVER);

	if (data->error != I2C_MASTER_ERR_NONE) {
	return -EIO;
	}

	buf[len - 1] = I2CMasterDataGet(base);

	return 0;

	recv_error_stop:
	I2CMasterControl(base, I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP);
	return -EIO;
	}

	static int i2c_cc13xx_cc26xx_transfer(const struct device *dev,
	struct i2c_msg *msgs,
	uint8_t num_msgs, uint16_t addr)
	{
	int ret = 0;

	if (num_msgs == 0) {
	return 0;
	}

	k_sem_take(&get_dev_data(dev)->lock, K_FOREVER);

	#ifdef CONFIG_PM
	pm_constraint_set(PM_STATE_STANDBY);
	#endif

	for (int i = 0; i < num_msgs; i++) {
	/* Not supported by hardware */
	if (msgs[i].flags & I2C_MSG_ADDR_10_BITS) {
	ret = -EIO;
	break;
	}

	if ((msgs[i].flags & I2C_MSG_RW_MASK) == I2C_MSG_WRITE) {
	ret = i2c_cc13xx_cc26xx_transmit(dev, msgs[i].buf,
	msgs[i].len, addr);
	} else {
	ret = i2c_cc13xx_cc26xx_receive(dev, msgs[i].buf,
	msgs[i].len, addr);
	}

	if (ret) {
	break;
	}
	}

	#ifdef CONFIG_PM
	pm_constraint_release(PM_STATE_STANDBY);
	#endif

	k_sem_give(&get_dev_data(dev)->lock);

	return ret;
	}

	#define CPU_FREQ DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
	static int i2c_cc13xx_cc26xx_configure(const struct device *dev,
	uint32_t dev_config)
	{
	bool fast;

	switch (I2C_SPEED_GET(dev_config)) {
	case I2C_SPEED_STANDARD:
	fast = false;
	break;
	case I2C_SPEED_FAST:
	fast = true;
	break;
	default:
	LOG_ERR("Unsupported speed");
	return -EIO;
	}

	/* Support for slave mode has not been implemented */
	if (!(dev_config & I2C_MODE_MASTER)) {
	LOG_ERR("Slave mode is not supported");
	return -EIO;
	}

	/* This is deprecated and could be ignored in the future */
	if (dev_config & I2C_ADDR_10_BITS) {
	LOG_ERR("10-bit addressing mode is not supported");
	return -EIO;
	}

	/* Enables and configures I2C master */
	I2CMasterInitExpClk(get_dev_config(dev)->base, CPU_FREQ, fast);

	#ifdef CONFIG_PM
	get_dev_data(dev)->dev_config = dev_config;
	#endif

	return 0;
	}

	static void i2c_cc13xx_cc26xx_isr(const void *arg)
	{
	const uint32_t base = get_dev_config(arg)->base;
	struct i2c_cc13xx_cc26xx_data *data = get_dev_data(arg);

	if (I2CMasterIntStatus(base, true)) {
	I2CMasterIntClear(base);

	data->error = I2CMasterErr(base);

	k_sem_give(&data->complete);
	}
	}

	#ifdef CONFIG_PM
	/*
	* ======== postNotifyFxn ========
	* Called by Power module when waking up the CPU from Standby. The i2c needs
	* to be reconfigured afterwards, unless Zephyr's device PM turned it off, in
	* which case it'd be responsible for turning it back on and reconfigure it.
	*/
	static int postNotifyFxn(unsigned int eventType, uintptr_t eventArg,
	uintptr_t clientArg)
	{
	const struct device dev = (const struct device )clientArg;
	int ret = Power_NOTIFYDONE;
	int16_t res_id;

	/* Reconfigure the hardware if returning from sleep */
	if (eventType == PowerCC26XX_AWAKE_STANDBY) {
	res_id = PowerCC26XX_PERIPH_I2C0;

	if (Power_getDependencyCount(res_id) != 0) {
	/* Reconfigure and enable I2C only if powered */
	if (i2c_cc13xx_cc26xx_configure(dev,
	get_dev_data(dev)->dev_config) != 0) {
	ret = Power_NOTIFYERROR;
	}

	I2CMasterIntEnable(get_dev_config(dev)->base);
	}
	}

	return (ret);
	}
	#endif

	#ifdef CONFIG_PM_DEVICE
	static int i2c_cc13xx_cc26xx_pm_action(const struct device *dev,
	enum pm_device_action action)
	{
	int ret = 0;

	switch (action) {
	case PM_DEVICE_ACTION_RESUME:
	Power_setDependency(PowerCC26XX_PERIPH_I2C0);
	IOCPinTypeI2c(get_dev_config(dev)->base,
	get_dev_config(dev)->sda_pin,
	get_dev_config(dev)->scl_pin);
	ret = i2c_cc13xx_cc26xx_configure(dev,
	get_dev_data(dev)->dev_config);
	if (ret == 0) {
	I2CMasterIntEnable(get_dev_config(dev)->base);
	}
	break;
	case PM_DEVICE_ACTION_SUSPEND:
	I2CMasterIntDisable(get_dev_config(dev)->base);
	I2CMasterDisable(get_dev_config(dev)->base);
	/* Reset pin type to default GPIO configuration */
	IOCPortConfigureSet(get_dev_config(dev)->scl_pin,
	IOC_PORT_GPIO, IOC_STD_OUTPUT);
	IOCPortConfigureSet(get_dev_config(dev)->sda_pin,
	IOC_PORT_GPIO, IOC_STD_OUTPUT);
	Power_releaseDependency(PowerCC26XX_PERIPH_I2C0);
	break;
	default:
	return -ENOTSUP;
	}

	return ret;
	}
	#endif /* CONFIG_PM_DEVICE */

	static int i2c_cc13xx_cc26xx_init(const struct device *dev)
	{
	uint32_t cfg;
	int err;

	#ifdef CONFIG_PM
	/* Set Power dependencies & constraints */
	Power_setDependency(PowerCC26XX_PERIPH_I2C0);

	/* Register notification function */
	Power_registerNotify(&get_dev_data(dev)->postNotify,
	PowerCC26XX_AWAKE_STANDBY,
	postNotifyFxn, (uintptr_t)dev);
	#else
	/* Enable I2C power domain */
	PRCMPowerDomainOn(PRCM_DOMAIN_SERIAL);

	/* Enable I2C peripheral clock */
	PRCMPeripheralRunEnable(PRCM_PERIPH_I2C0);
	/* Enable in sleep mode until proper power management is added */
	PRCMPeripheralSleepEnable(PRCM_PERIPH_I2C0);
	PRCMPeripheralDeepSleepEnable(PRCM_PERIPH_I2C0);

	/* Load PRCM settings */
	PRCMLoadSet();
	while (!PRCMLoadGet()) {
	continue;
	}

	/* I2C should not be accessed until power domain is on. */
	while (PRCMPowerDomainStatus(PRCM_DOMAIN_SERIAL) !=
	PRCM_DOMAIN_POWER_ON) {
	continue;
	}
	#endif

	IRQ_CONNECT(DT_INST_IRQN(0),
	DT_INST_IRQ(0, priority),
	i2c_cc13xx_cc26xx_isr, DEVICE_DT_INST_GET(0), 0);
	irq_enable(DT_INST_IRQN(0));

	/* Configure IOC module to route SDA and SCL signals */
	IOCPinTypeI2c(get_dev_config(dev)->base, get_dev_config(dev)->sda_pin,
	get_dev_config(dev)->scl_pin);

	cfg = i2c_map_dt_bitrate(DT_INST_PROP(0, clock_frequency));
	err = i2c_cc13xx_cc26xx_configure(dev, cfg \| I2C_MODE_MASTER);
	if (err) {
	LOG_ERR("Failed to configure");
	return err;
	}

	I2CMasterIntEnable(get_dev_config(dev)->base);

	return 0;
	}

	static const struct i2c_driver_api i2c_cc13xx_cc26xx_driver_api = {
	.configure = i2c_cc13xx_cc26xx_configure,
	.transfer = i2c_cc13xx_cc26xx_transfer
	};

	static const struct i2c_cc13xx_cc26xx_config i2c_cc13xx_cc26xx_config = {
	.base = DT_INST_REG_ADDR(0),
	.sda_pin = DT_INST_PROP(0, sda_pin),
	.scl_pin = DT_INST_PROP(0, scl_pin)
	};

	static struct i2c_cc13xx_cc26xx_data i2c_cc13xx_cc26xx_data = {
	.lock = Z_SEM_INITIALIZER(i2c_cc13xx_cc26xx_data.lock, 1, 1),
	.complete = Z_SEM_INITIALIZER(i2c_cc13xx_cc26xx_data.complete, 0, 1),
	.error = I2C_MASTER_ERR_NONE
	};

	PM_DEVICE_DT_INST_DEFINE(0, i2c_cc13xx_cc26xx_pm_action);

	I2C_DEVICE_DT_INST_DEFINE(0,
	i2c_cc13xx_cc26xx_init,
	PM_DEVICE_DT_INST_REF(0),
	&i2c_cc13xx_cc26xx_data, &i2c_cc13xx_cc26xx_config,
	POST_KERNEL, CONFIG_I2C_INIT_PRIORITY,
	&i2c_cc13xx_cc26xx_driver_api);