boards/nordic/nrf5340dk/nrf5340dk_common.dtsi

/*
 * Copyright (c) 2020 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/dt-bindings/gpio/arduino-header-r3.h>

/ {
	leds {
		compatible = "gpio-leds";

		led0: led_0 {
			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
			label = "Green LED 0";
		};

		led1: led_1 {
			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
			label = "Green LED 1";
		};

		led2: led_2 {
			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
			label = "Green LED 2";
		};

		led3: led_3 {
			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
			label = "Green LED 3";
		};
	};

	buttons {
		compatible = "gpio-keys";

		button0: button_0 {
			gpios = <&gpio0 23 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 1";
			zephyr,code = <INPUT_KEY_0>;
		};

		button1: button_1 {
			gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 2";
			zephyr,code = <INPUT_KEY_1>;
		};

		button2: button_2 {
			gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 3";
			zephyr,code = <INPUT_KEY_2>;
		};

		button3: button_3 {
			gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button 4";
			zephyr,code = <INPUT_KEY_3>;
		};
	};

	arduino_header: connector {
		compatible = "arduino-header-r3";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map = <ARDUINO_HEADER_R3_A0 0 &gpio0 4 0>,
			   <ARDUINO_HEADER_R3_A1 0 &gpio0 5 0>,
			   <ARDUINO_HEADER_R3_A2 0 &gpio0 6 0>,
			   <ARDUINO_HEADER_R3_A3 0 &gpio0 7 0>,
			   <ARDUINO_HEADER_R3_A4 0 &gpio0 25 0>,
			   <ARDUINO_HEADER_R3_A5 0 &gpio0 26 0>,
			   <ARDUINO_HEADER_R3_D0 0 &gpio1 0 0>,
			   <ARDUINO_HEADER_R3_D1 0 &gpio1 1 0>,
			   <ARDUINO_HEADER_R3_D2 0 &gpio1 4 0>,
			   <ARDUINO_HEADER_R3_D3 0 &gpio1 5 0>,
			   <ARDUINO_HEADER_R3_D4 0 &gpio1 6 0>,
			   <ARDUINO_HEADER_R3_D5 0 &gpio1 7 0>,
			   <ARDUINO_HEADER_R3_D6 0 &gpio1 8 0>,
			   <ARDUINO_HEADER_R3_D7 0 &gpio1 9 0>,
			   <ARDUINO_HEADER_R3_D8 0 &gpio1 10 0>,
			   <ARDUINO_HEADER_R3_D9 0 &gpio1 11 0>,
			   <ARDUINO_HEADER_R3_D10 0 &gpio1 12 0>,
			   <ARDUINO_HEADER_R3_D11 0 &gpio1 13 0>,
			   <ARDUINO_HEADER_R3_D12 0 &gpio1 14 0>,
			   <ARDUINO_HEADER_R3_D13 0 &gpio1 15 0>,
			   <ARDUINO_HEADER_R3_D14 0 &gpio1 2 0>,
			   <ARDUINO_HEADER_R3_D15 0 &gpio1 3 0>;
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		led2 = &led2;
		led3 = &led3;
		sw0 = &button0;
		sw1 = &button1;
		sw2 = &button2;
		sw3 = &button3;
		mcuboot-button0 = &button0;
		mcuboot-led0 = &led0;
	};
};