/** | |
****************************************************************************** | |
* @file stm32f7xx_hal_pwr.h | |
* @author MCD Application Team | |
* @version V1.1.1 | |
* @date 01-July-2016 | |
* @brief Header file of PWR HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F7xx_HAL_PWR_H | |
#define __STM32F7xx_HAL_PWR_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f7xx_hal_def.h" | |
/** @addtogroup STM32F7xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup PWR | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup PWR_Exported_Types PWR Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief PWR PVD configuration structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. | |
This parameter can be a value of @ref PWR_PVD_detection_level */ | |
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. | |
This parameter can be a value of @ref PWR_PVD_Mode */ | |
}PWR_PVDTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup PWR_Exported_Constants PWR Exported Constants | |
* @{ | |
*/ | |
/** @defgroup PWR_PVD_detection_level PWR PVD detection level | |
* @{ | |
*/ | |
#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 | |
#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 | |
#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 | |
#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 | |
#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 | |
#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 | |
#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 | |
#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7/* External input analog voltage | |
(Compare internally to VREFINT) */ | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_PVD_Mode PWR PVD Mode | |
* @{ | |
*/ | |
#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */ | |
#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */ | |
#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */ | |
#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ | |
#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */ | |
#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */ | |
#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode | |
* @{ | |
*/ | |
#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U) | |
#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry | |
* @{ | |
*/ | |
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U) | |
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U) | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry | |
* @{ | |
*/ | |
#define PWR_STOPENTRY_WFI ((uint8_t)0x01U) | |
#define PWR_STOPENTRY_WFE ((uint8_t)0x02U) | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale | |
* @{ | |
*/ | |
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS | |
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 | |
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR1_VOS_0 | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_Flag PWR Flag | |
* @{ | |
*/ | |
#define PWR_FLAG_WU PWR_CSR1_WUIF | |
#define PWR_FLAG_SB PWR_CSR1_SBF | |
#define PWR_FLAG_PVDO PWR_CSR1_PVDO | |
#define PWR_FLAG_BRR PWR_CSR1_BRR | |
#define PWR_FLAG_VOSRDY PWR_CSR1_VOSRDY | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup PWR_Exported_Macro PWR Exported Macro | |
* @{ | |
*/ | |
/** @brief macros configure the main internal regulator output voltage. | |
* @param __REGULATOR__: specifies the regulator output voltage to achieve | |
* a tradeoff between performance and power consumption when the device does | |
* not operate at the maximum frequency (refer to the datasheets for more details). | |
* This parameter can be one of the following values: | |
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode | |
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode | |
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode | |
* @retval None | |
*/ | |
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ | |
__IO uint32_t tmpreg; \ | |
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \ | |
/* Delay after an RCC peripheral clock enabling */ \ | |
tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \ | |
UNUSED(tmpreg); \ | |
} while(0) | |
/** @brief Check PWR flag is set or not. | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be one of the following values: | |
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event | |
* was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B), | |
* RTC Tamper event, RTC TimeStamp event or RTC Wakeup)). | |
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was | |
* resumed from StandBy mode. | |
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled | |
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode | |
* For this reason, this bit is equal to 0 after Standby or reset | |
* until the PVDE bit is set. | |
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset | |
* when the device wakes up from Standby mode or by a system reset | |
* or power reset. | |
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage | |
* scaling output selection is ready. | |
* @retval The new state of __FLAG__ (TRUE or FALSE). | |
*/ | |
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__)) | |
/** @brief Clear the PWR's pending flags. | |
* @param __FLAG__: specifies the flag to clear. | |
* This parameter can be one of the following values: | |
* @arg PWR_FLAG_SB: StandBy flag | |
*/ | |
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |= (__FLAG__) << 2) | |
/** | |
* @brief Enable the PVD Exti Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Disable the PVD EXTI Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Enable event on PVD Exti Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Disable event on PVD Exti Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Enable the PVD Extended Interrupt Rising Trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Disable the PVD Extended Interrupt Rising Trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Enable the PVD Extended Interrupt Falling Trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Disable the PVD Extended Interrupt Falling Trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief PVD EXTI line configuration: set rising & falling edge trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); | |
/** | |
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); | |
/** | |
* @brief checks whether the specified PVD Exti interrupt flag is set or not. | |
* @retval EXTI PVD Line Status. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Clear the PVD Exti flag. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Generates a Software interrupt on PVD EXTI line. | |
* @retval None | |
*/ | |
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) | |
/** | |
* @} | |
*/ | |
/* Include PWR HAL Extension module */ | |
#include "stm32f7xx_hal_pwr_ex.h" | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup PWR_Exported_Functions PWR Exported Functions | |
* @{ | |
*/ | |
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions | |
* @{ | |
*/ | |
/* Initialization and de-initialization functions *****************************/ | |
void HAL_PWR_DeInit(void); | |
void HAL_PWR_EnableBkUpAccess(void); | |
void HAL_PWR_DisableBkUpAccess(void); | |
/** | |
* @} | |
*/ | |
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions | |
* @{ | |
*/ | |
/* Peripheral Control functions **********************************************/ | |
/* PVD configuration */ | |
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); | |
void HAL_PWR_EnablePVD(void); | |
void HAL_PWR_DisablePVD(void); | |
/* WakeUp pins configuration */ | |
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); | |
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); | |
/* Low Power modes entry */ | |
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); | |
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); | |
void HAL_PWR_EnterSTANDBYMode(void); | |
/* Power PVD IRQ Handler */ | |
void HAL_PWR_PVD_IRQHandler(void); | |
void HAL_PWR_PVDCallback(void); | |
/* Cortex System Control functions *******************************************/ | |
void HAL_PWR_EnableSleepOnExit(void); | |
void HAL_PWR_DisableSleepOnExit(void); | |
void HAL_PWR_EnableSEVOnPend(void); | |
void HAL_PWR_DisableSEVOnPend(void); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup PWR_Private_Constants PWR Private Constants | |
* @{ | |
*/ | |
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line | |
* @{ | |
*/ | |
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_IM16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup PWR_Private_Macros PWR Private Macros | |
* @{ | |
*/ | |
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters | |
* @{ | |
*/ | |
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ | |
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ | |
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ | |
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) | |
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ | |
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ | |
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ | |
((MODE) == PWR_PVD_MODE_NORMAL)) | |
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ | |
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) | |
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) | |
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) | |
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ | |
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ | |
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F7xx_HAL_PWR_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |