boards/nxp/frdm_mcxe247/frdm_mcxe247.dts

/*
 * Copyright 2025 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <nxp/nxp_mcxe247.dtsi>
#include "frdm_mcxe247-pinctrl.dtsi"
#include <zephyr/dt-bindings/gpio/arduino-header-r3.h>
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "NXP FRDM-MCXE247 board";
	compatible = "nxp,mcxe247", "nxp,mcx";

	aliases {
		led0 = &red_led;
		led1 = &green_led;
		led2 = &blue_led;
		sw0 = &user_button_2;
		sw1 = &user_button_3;
	};

	chosen {
		zephyr,sram = &sram_l;
		zephyr,flash = &flash0;
		zephyr,console = &lpuart2;
		zephyr,shell-uart = &lpuart2;
		zephyr,canbus = &flexcan0;
	};

	leds {
		compatible = "gpio-leds";
		red_led: led_0 {
			gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
			label = "Red LED";
		};
		green_led: led_1 {
			gpios = <&gpiob 11 GPIO_ACTIVE_LOW>;
			label = "Green LED";
		};
		blue_led: led_2 {
			gpios = <&gpioc 12 GPIO_ACTIVE_LOW>;
			label = "Blue LED";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button_2: button_2 {
			label = "User SW2";
			gpios = <&gpioa 9 GPIO_ACTIVE_LOW>;
			zephyr,code = <INPUT_KEY_0>;
		};
		user_button_3: button_3 {
			label = "User SW3";
			gpios = <&gpioc 10 GPIO_ACTIVE_LOW>;
			zephyr,code = <INPUT_KEY_1>;
		};
	};

	arduino_header: connector {
		compatible = "arduino-header-r3";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map = <ARDUINO_HEADER_R3_A0 0 &gpioa 15 0>,
			   <ARDUINO_HEADER_R3_A1 0 &gpioa 6 0>,
			   <ARDUINO_HEADER_R3_A2 0 &gpiod 4 0>,
			   <ARDUINO_HEADER_R3_A3 0 &gpioc 14 0>,
			   <ARDUINO_HEADER_R3_A4 0 &gpioa 0 0>,
			   <ARDUINO_HEADER_R3_A5 0 &gpioa 1 0>,
			   <ARDUINO_HEADER_R3_D0 0 &gpiod 17 0>,
			   <ARDUINO_HEADER_R3_D1 0 &gpioe 12 0>,
			   <ARDUINO_HEADER_R3_D2 0 &gpiod 6 0>,
			   <ARDUINO_HEADER_R3_D3 0 &gpioe 9 0>,
			   <ARDUINO_HEADER_R3_D4 0 &gpiob 8 0>,
			   <ARDUINO_HEADER_R3_D5 0 &gpioc 11 0>,
			   <ARDUINO_HEADER_R3_D6 0 &gpiod 15 0>,
			   <ARDUINO_HEADER_R3_D7 0 &gpiob 9 0>,
			   <ARDUINO_HEADER_R3_D8 0 &gpiob 10 0>,
			   <ARDUINO_HEADER_R3_D9 0 &gpioe 15 0>,
			   <ARDUINO_HEADER_R3_D10 0 &gpioa 16 0>,
			   <ARDUINO_HEADER_R3_D11 0 &gpiod 2 0>,
			   <ARDUINO_HEADER_R3_D12 0 &gpiob 15 0>,
			   <ARDUINO_HEADER_R3_D13 0 &gpiob 14 0>,
			   <ARDUINO_HEADER_R3_D14 0 &gpiod 8 0>,
			   <ARDUINO_HEADER_R3_D15 0 &gpiod 9 0>;
	};
};

&cpu0 {
	clock-frequency = <80000000>;
};

&sosc_clk {
	clock-frequency = <8000000>;
	status = "okay";
};

&spll_clk {
	status = "okay";
};

&core_clk {
	clocks = <&spll_clk>;
	clock-div = <2>;
};

&bus_clk {
	clock-div = <2>;
};

&slow_clk {
	clock-div = <4>;
};

&fircdiv2_clk {
	clock-div = <1>;
};

&soscdiv2_clk {
	clock-div = <1>;
};

&gpioa {
	status = "okay";
};

&gpiob {
	status = "okay";
};

&gpioc {
	status = "okay";
};

&gpiod {
	status = "okay";
};

&gpioe {
	status = "okay";
};

&lpuart1 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&pinmux_lpuart1>;
	pinctrl-names = "default";
};

&lpuart2 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&pinmux_lpuart2>;
	pinctrl-names = "default";
};

&edma {
	status = "okay";
};