| /* |
| * Copyright (c) 2020, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * @brief Board configuration macros for the nxp_lpc55s69 platform |
| * |
| * This header file is used to specify and describe board-level aspects for the |
| * 'nxp_lpc55s69' platform. |
| */ |
| |
| #ifndef _SOC__H_ |
| #define _SOC__H_ |
| |
| #ifndef _ASMLANGUAGE |
| #include <zephyr/sys/util.h> |
| #include <fsl_common.h> |
| |
| /* Add include for DTS generated information */ |
| #include <zephyr/devicetree.h> |
| |
| #endif /* !_ASMLANGUAGE */ |
| |
| /*!<@brief Analog mux is disabled */ |
| #define IOPCTL_PIO_ANAMUX_DI 0x00u |
| /*!<@brief Analog mux is enabled */ |
| #define IOPCTL_PIO_ANAMUX_EN 0x0200u |
| /*!<@brief Normal drive */ |
| #define IOPCTL_PIO_FULLDRIVE_DI 0x00u |
| /*!<@brief Full drive */ |
| #define IOPCTL_PIO_FULLDRIVE_EN 0x0100u |
| /*!<@brief Selects pin function 0 */ |
| #define IOPCTL_PIO_FUNC0 0x00u |
| /*!<@brief Selects pin function 1 */ |
| #define IOPCTL_PIO_FUNC1 0x01u |
| /*!<@brief Selects pin function 2 */ |
| #define IOPCTL_PIO_FUNC2 0x02u |
| /*!<@brief Selects pin function 3 */ |
| #define IOPCTL_PIO_FUNC3 0x03u |
| /*!<@brief Selects pin function 4 */ |
| #define IOPCTL_PIO_FUNC4 0x04u |
| /*!<@brief Selects pin function 5 */ |
| #define IOPCTL_PIO_FUNC5 0x05u |
| /*!<@brief Selects pin function 6 */ |
| #define IOPCTL_PIO_FUNC6 0x06u |
| /*!<@brief Selects pin function 7 */ |
| #define IOPCTL_PIO_FUNC7 0x07u |
| /*!<@brief Selects pin function 8 */ |
| #define IOPCTL_PIO_FUNC8 0x08u |
| /*!<@brief Disable input buffer function */ |
| #define IOPCTL_PIO_INBUF_DI 0x00u |
| /*!<@brief Enables input buffer function */ |
| #define IOPCTL_PIO_INBUF_EN 0x40u |
| /*!<@brief Input function is not inverted */ |
| #define IOPCTL_PIO_INV_DI 0x00u |
| /*!<@brief Input function is inverted */ |
| #define IOPCTL_PIO_INV_EN 0x0800u |
| /*!<@brief Pseudo Output Drain is disabled */ |
| #define IOPCTL_PIO_PSEDRAIN_DI 0x00u |
| /*!<@brief Pseudo Output Drain is enabled */ |
| #define IOPCTL_PIO_PSEDRAIN_EN 0x0400u |
| /*!<@brief Enable pull-down function */ |
| #define IOPCTL_PIO_PULLDOWN_EN 0x00u |
| /*!<@brief Enable pull-up function */ |
| #define IOPCTL_PIO_PULLUP_EN 0x20u |
| /*!<@brief Disable pull-up / pull-down function */ |
| #define IOPCTL_PIO_PUPD_DI 0x00u |
| /*!<@brief Enable pull-up / pull-down function */ |
| #define IOPCTL_PIO_PUPD_EN 0x10u |
| /*!<@brief Normal mode */ |
| #define IOPCTL_PIO_SLEW_RATE_NORMAL 0x00u |
| /*!<@brief Slow mode */ |
| #define IOPCTL_PIO_SLEW_RATE_SLOW 0x80u |
| |
| /* Workaround to handle macro variation in the SDK */ |
| #ifndef INPUTMUX_PINTSEL_COUNT |
| #define INPUTMUX_PINTSEL_COUNT INPUTMUX_PINT_SEL_COUNT |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if CONFIG_IMX_USDHC && \ |
| (DT_NODE_HAS_STATUS(DT_NODELABEL(usdhc0), okay) || \ |
| DT_NODE_HAS_STATUS(DT_NODELABEL(usdhc1), okay)) |
| |
| void imxrt_usdhc_pinmux(uint16_t nusdhc, |
| bool init, uint32_t speed, uint32_t strength); |
| void imxrt_usdhc_dat3_pull(bool pullup); |
| |
| #endif |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* _SOC__H_ */ |