samples/drivers/can/src/main.c

/*
 * Copyright (c) 2018 Alexander Wachter
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr.h>
#include <kernel.h>
#include <sys/printk.h>
#include <device.h>
#include <drivers/can.h>
#include <drivers/gpio.h>
#include <sys/byteorder.h>

#define RX_THREAD_STACK_SIZE 512
#define RX_THREAD_PRIORITY 2
#define STATE_POLL_THREAD_STACK_SIZE 512
#define STATE_POLL_THREAD_PRIORITY 2
#define LED_MSG_ID 0x10
#define COUNTER_MSG_ID 0x12345
#define SET_LED 1
#define RESET_LED 0
#define SLEEP_TIME K_MSEC(250)

K_THREAD_STACK_DEFINE(rx_thread_stack, RX_THREAD_STACK_SIZE);
K_THREAD_STACK_DEFINE(poll_state_stack, STATE_POLL_THREAD_STACK_SIZE);

const struct device *can_dev;
const struct device *led_gpio_dev;

struct k_thread rx_thread_data;
struct k_thread poll_state_thread_data;
struct zcan_work rx_work;
struct k_work state_change_work;
enum can_state current_state;
struct can_bus_err_cnt current_err_cnt;

CAN_DEFINE_MSGQ(counter_msgq, 2);

void tx_irq_callback(uint32_t error_flags, void *arg)
{
	char *sender = (char *)arg;

	if (error_flags) {
		printk("Callback! error-code: %d\nSender: %s\n",
		       error_flags, sender);
	}
}

void rx_thread(void *arg1, void *arg2, void *arg3)
{
	ARG_UNUSED(arg1);
	ARG_UNUSED(arg2);
	ARG_UNUSED(arg3);
	const struct zcan_filter filter = {
		.id_type = CAN_EXTENDED_IDENTIFIER,
		.rtr = CAN_DATAFRAME,
		.ext_id = COUNTER_MSG_ID,
		.rtr_mask = 1,
		.ext_id_mask = CAN_EXT_ID_MASK
	};
	struct zcan_frame msg;
	int filter_id;

	filter_id = can_attach_msgq(can_dev, &counter_msgq, &filter);
	printk("Counter filter id: %d\n", filter_id);

	while (1) {
		k_msgq_get(&counter_msgq, &msg, K_FOREVER);

		if (msg.dlc != 2U) {
			printk("Wrong data length: %u\n", msg.dlc);
			continue;
		}

		printk("Counter received: %u\n",
		       sys_be16_to_cpu(UNALIGNED_GET((uint16_t *)&msg.data)));
	}
}

void change_led(struct zcan_frame *msg, void *unused)
{
	ARG_UNUSED(unused);

#if DT_PHA_HAS_CELL(DT_ALIAS(led0), gpios, pin) && \
    DT_NODE_HAS_PROP(DT_ALIAS(led0), gpios)

	if (!led_gpio_dev) {
		printk("No LED GPIO device\n");
		return;
	}

	switch (msg->data[0]) {
	case SET_LED:
		gpio_pin_set(led_gpio_dev,
			     DT_GPIO_PIN(DT_ALIAS(led0), gpios), 1);
		break;
	case RESET_LED:
		gpio_pin_set(led_gpio_dev,
			     DT_GPIO_PIN(DT_ALIAS(led0), gpios), 0);
		break;
	}
#else
	printk("LED %s\n", msg->data[0] == SET_LED ? "ON" : "OFF");
#endif
}

char *state_to_str(enum can_state state)
{
	switch (state) {
	case CAN_ERROR_ACTIVE:
		return "error-active";
	case CAN_ERROR_PASSIVE:
		return "error-passive";
	case CAN_BUS_OFF:
		return "bus-off";
	default:
		return "unknown";
	}
}

void poll_state_thread(void *unused1, void *unused2, void *unused3)
{
	struct can_bus_err_cnt err_cnt = {0, 0};
	struct can_bus_err_cnt err_cnt_prev = {0, 0};
	enum can_state state_prev = CAN_ERROR_ACTIVE;
	enum can_state state;

	while (1) {
		state = can_get_state(can_dev, &err_cnt);
		if (err_cnt.tx_err_cnt != err_cnt_prev.tx_err_cnt ||
		    err_cnt.rx_err_cnt != err_cnt_prev.rx_err_cnt ||
		    state_prev != state) {

			err_cnt_prev.tx_err_cnt = err_cnt.tx_err_cnt;
			err_cnt_prev.rx_err_cnt = err_cnt.rx_err_cnt;
			state_prev = state;
			printk("state: %s\n"
			       "rx error count: %d\n"
			       "tx error count: %d\n",
			       state_to_str(state),
			       err_cnt.rx_err_cnt, err_cnt.tx_err_cnt);
		} else {
			k_sleep(K_MSEC(100));
		}
	}
}

void state_change_work_handler(struct k_work *work)
{
	printk("State Change ISR\nstate: %s\n"
	       "rx error count: %d\n"
	       "tx error count: %d\n",
		state_to_str(current_state),
		current_err_cnt.rx_err_cnt, current_err_cnt.tx_err_cnt);

#ifndef CONFIG_CAN_AUTO_BUS_OFF_RECOVERY
	if (current_state == CAN_BUS_OFF) {
		printk("Recover from bus-off\n");

		if (can_recover(can_dev, K_MSEC(100) != 0)) {
			printk("Recovery timed out\n");
		}
	}
#endif /* CONFIG_CAN_AUTO_BUS_OFF_RECOVERY */
}

void state_change_isr(enum can_state state, struct can_bus_err_cnt err_cnt)
{
	current_state = state;
	current_err_cnt = err_cnt;
	k_work_submit(&state_change_work);
}

void main(void)
{
	const struct zcan_filter change_led_filter = {
		.id_type = CAN_STANDARD_IDENTIFIER,
		.rtr = CAN_DATAFRAME,
		.std_id = LED_MSG_ID,
		.rtr_mask = 1,
		.std_id_mask = CAN_STD_ID_MASK
	};
	struct zcan_frame change_led_frame = {
		.id_type = CAN_STANDARD_IDENTIFIER,
		.rtr = CAN_DATAFRAME,
		.std_id = LED_MSG_ID,
		.dlc = 1
	};
	struct zcan_frame counter_frame = {
		.id_type = CAN_EXTENDED_IDENTIFIER,
		.rtr = CAN_DATAFRAME,
		.ext_id = COUNTER_MSG_ID,
		.dlc = 2
	};
	uint8_t toggle = 1;
	uint16_t counter = 0;
	k_tid_t rx_tid, get_state_tid;
	int ret;

	can_dev = device_get_binding(DT_CHOSEN_ZEPHYR_CAN_PRIMARY_LABEL);

	if (!can_dev) {
		printk("CAN: Device driver not found.\n");
		return;
	}

#ifdef CONFIG_LOOPBACK_MODE
	can_configure(can_dev, CAN_LOOPBACK_MODE, 125000);
#endif

#if DT_PHA_HAS_CELL(DT_ALIAS(led0), gpios, pin) && \
    DT_NODE_HAS_PROP(DT_ALIAS(led0), gpios)
	led_gpio_dev = device_get_binding(DT_GPIO_LABEL(DT_ALIAS(led0), gpios));
	if (!led_gpio_dev) {
		printk("LED: Device driver not found.\n");
		return;
	}

	ret = gpio_pin_configure(led_gpio_dev,
				 DT_GPIO_PIN(DT_ALIAS(led0), gpios),
				 GPIO_OUTPUT_HIGH |
				 DT_GPIO_FLAGS(DT_ALIAS(led0), gpios));
	if (ret < 0) {
		printk("Error setting LED pin to output mode [%d]", ret);
	}
#endif

	k_work_init(&state_change_work, state_change_work_handler);

	ret = can_attach_workq(can_dev, &k_sys_work_q, &rx_work, change_led,
			       NULL, &change_led_filter);
	if (ret == CAN_NO_FREE_FILTER) {
		printk("Error, no filter available!\n");
		return;
	}

	printk("Change LED filter ID: %d\n", ret);

	rx_tid = k_thread_create(&rx_thread_data, rx_thread_stack,
				 K_THREAD_STACK_SIZEOF(rx_thread_stack),
				 rx_thread, NULL, NULL, NULL,
				 RX_THREAD_PRIORITY, 0, K_NO_WAIT);
	if (!rx_tid) {
		printk("ERROR spawning rx thread\n");
	}


	get_state_tid = k_thread_create(&poll_state_thread_data,
					poll_state_stack,
					K_THREAD_STACK_SIZEOF(poll_state_stack),
					poll_state_thread, NULL, NULL, NULL,
					STATE_POLL_THREAD_PRIORITY, 0,
					K_NO_WAIT);
	if (!get_state_tid) {
		printk("ERROR spawning poll_state_thread\n");
	}

	can_register_state_change_isr(can_dev, state_change_isr);

	printk("Finished init.\n");

	while (1) {
		change_led_frame.data[0] = toggle++ & 0x01 ? SET_LED : RESET_LED;
		/* This sending call is none blocking. */
		can_send(can_dev, &change_led_frame, K_FOREVER,
			 tx_irq_callback,
			 "LED change");
		k_sleep(SLEEP_TIME);

		UNALIGNED_PUT(sys_cpu_to_be16(counter),
			      (uint16_t *)&counter_frame.data[0]);
		counter++;
		/* This sending call is blocking until the message is sent. */
		can_send(can_dev, &counter_frame, K_MSEC(100), NULL, NULL);
		k_sleep(SLEEP_TIME);
	}
}