| /* |
| * Copyright (c) 2020 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include <zephyr/bluetooth/mesh.h> |
| #include <zephyr/sys/iterable_sections.h> |
| |
| #include "net.h" |
| #include "rpl.h" |
| #include "access.h" |
| #include "lpn.h" |
| #include "settings.h" |
| #include "mesh.h" |
| #include "transport.h" |
| #include "heartbeat.h" |
| #include "foundation.h" |
| |
| #define LOG_LEVEL CONFIG_BT_MESH_TRANS_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_mesh_hb); |
| |
| /* Heartbeat Publication information for persistent storage. */ |
| struct hb_pub_val { |
| uint16_t dst; |
| uint8_t period; |
| uint8_t ttl; |
| uint16_t feat; |
| uint16_t net_idx:12, |
| indefinite:1; |
| }; |
| |
| static struct bt_mesh_hb_pub pub; |
| static struct bt_mesh_hb_sub sub; |
| static struct k_work_delayable sub_timer; |
| static struct k_work_delayable pub_timer; |
| |
| static void notify_pub_sent(void) |
| { |
| STRUCT_SECTION_FOREACH(bt_mesh_hb_cb, cb) { |
| if (cb->pub_sent) { |
| cb->pub_sent(&pub); |
| } |
| } |
| } |
| |
| static int64_t sub_remaining(void) |
| { |
| if (sub.dst == BT_MESH_ADDR_UNASSIGNED) { |
| return 0U; |
| } |
| |
| uint32_t rem_ms = k_ticks_to_ms_floor32( |
| k_work_delayable_remaining_get(&sub_timer)); |
| |
| return rem_ms / MSEC_PER_SEC; |
| } |
| |
| static void hb_publish_end_cb(int err, void *cb_data) |
| { |
| if (pub.period && pub.count > 1) { |
| k_work_reschedule(&pub_timer, K_SECONDS(pub.period)); |
| } |
| |
| if (pub.count != 0xffff) { |
| pub.count--; |
| } |
| |
| if (!err) { |
| notify_pub_sent(); |
| } |
| } |
| |
| static void notify_recv(uint8_t hops, uint16_t feat) |
| { |
| sub.remaining = sub_remaining(); |
| |
| STRUCT_SECTION_FOREACH(bt_mesh_hb_cb, cb) { |
| if (cb->recv) { |
| cb->recv(&sub, hops, feat); |
| } |
| } |
| } |
| |
| static void notify_sub_end(void) |
| { |
| sub.remaining = 0; |
| |
| STRUCT_SECTION_FOREACH(bt_mesh_hb_cb, cb) { |
| if (cb->sub_end) { |
| cb->sub_end(&sub); |
| } |
| } |
| } |
| |
| static void sub_end(struct k_work *work) |
| { |
| notify_sub_end(); |
| } |
| |
| static int heartbeat_send(const struct bt_mesh_send_cb *cb, void *cb_data) |
| { |
| uint16_t feat = 0U; |
| struct __packed { |
| uint8_t init_ttl; |
| uint16_t feat; |
| } hb; |
| struct bt_mesh_msg_ctx ctx = { |
| .net_idx = pub.net_idx, |
| .app_idx = BT_MESH_KEY_UNUSED, |
| .addr = pub.dst, |
| .send_ttl = pub.ttl, |
| }; |
| struct bt_mesh_net_tx tx = { |
| .sub = bt_mesh_subnet_get(pub.net_idx), |
| .ctx = &ctx, |
| .src = bt_mesh_primary_addr(), |
| .xmit = bt_mesh_net_transmit_get(), |
| }; |
| |
| /* Do nothing if heartbeat publication is not enabled or the subnet is |
| * removed. |
| */ |
| if (!tx.sub || pub.dst == BT_MESH_ADDR_UNASSIGNED) { |
| return 0; |
| } |
| |
| hb.init_ttl = pub.ttl; |
| |
| if (bt_mesh_relay_get() == BT_MESH_RELAY_ENABLED) { |
| feat |= BT_MESH_FEAT_RELAY; |
| } |
| |
| if (bt_mesh_gatt_proxy_get() == BT_MESH_GATT_PROXY_ENABLED) { |
| feat |= BT_MESH_FEAT_PROXY; |
| } |
| |
| if (bt_mesh_friend_get() == BT_MESH_FRIEND_ENABLED) { |
| feat |= BT_MESH_FEAT_FRIEND; |
| } |
| |
| if (bt_mesh_lpn_established()) { |
| feat |= BT_MESH_FEAT_LOW_POWER; |
| } |
| |
| hb.feat = sys_cpu_to_be16(feat); |
| |
| LOG_DBG("InitTTL %u feat 0x%04x", pub.ttl, feat); |
| |
| return bt_mesh_ctl_send(&tx, TRANS_CTL_OP_HEARTBEAT, &hb, sizeof(hb), |
| cb, cb_data); |
| } |
| |
| static void hb_publish_start_cb(uint16_t duration, int err, void *cb_data) |
| { |
| if (err) { |
| hb_publish_end_cb(err, cb_data); |
| } |
| } |
| |
| static void hb_publish(struct k_work *work) |
| { |
| static const struct bt_mesh_send_cb publish_cb = { |
| .start = hb_publish_start_cb, |
| .end = hb_publish_end_cb, |
| }; |
| struct bt_mesh_subnet *sub; |
| int err; |
| |
| LOG_DBG("hb_pub.count: %u", pub.count); |
| |
| /* Fast exit if disabled or expired */ |
| if (pub.period == 0U || pub.count == 0U) { |
| return; |
| } |
| |
| sub = bt_mesh_subnet_get(pub.net_idx); |
| if (!sub) { |
| LOG_ERR("No matching subnet for idx 0x%02x", pub.net_idx); |
| pub.dst = BT_MESH_ADDR_UNASSIGNED; |
| return; |
| } |
| |
| err = heartbeat_send(&publish_cb, NULL); |
| if (err) { |
| hb_publish_end_cb(err, NULL); |
| } |
| } |
| |
| int bt_mesh_hb_recv(struct bt_mesh_net_rx *rx, struct net_buf_simple *buf) |
| { |
| uint8_t init_ttl, hops; |
| uint16_t feat; |
| |
| if (buf->len < 3) { |
| LOG_ERR("Too short heartbeat message"); |
| return -EINVAL; |
| } |
| |
| init_ttl = (net_buf_simple_pull_u8(buf) & 0x7f); |
| feat = net_buf_simple_pull_be16(buf); |
| |
| hops = (init_ttl - rx->ctx.recv_ttl + 1); |
| |
| if (rx->ctx.addr != sub.src || rx->ctx.recv_dst != sub.dst) { |
| LOG_DBG("No subscription for received heartbeat"); |
| return 0; |
| } |
| |
| if (!k_work_delayable_is_pending(&sub_timer)) { |
| LOG_DBG("Heartbeat subscription inactive"); |
| return 0; |
| } |
| |
| sub.min_hops = MIN(sub.min_hops, hops); |
| sub.max_hops = MAX(sub.max_hops, hops); |
| |
| if (sub.count < 0xffff) { |
| sub.count++; |
| } |
| |
| LOG_DBG("src 0x%04x TTL %u InitTTL %u (%u hop%s) feat 0x%04x", rx->ctx.addr, |
| rx->ctx.recv_ttl, init_ttl, hops, (hops == 1U) ? "" : "s", feat); |
| |
| notify_recv(hops, feat); |
| |
| return 0; |
| } |
| |
| static void pub_disable(void) |
| { |
| LOG_DBG(""); |
| |
| pub.dst = BT_MESH_ADDR_UNASSIGNED; |
| pub.count = 0U; |
| pub.period = 0U; |
| pub.ttl = 0U; |
| pub.feat = 0U; |
| pub.net_idx = 0U; |
| |
| /* Try to cancel, but it's OK if this still runs (or is |
| * running) as the handler will be a no-op if it hasn't |
| * already checked period for being non-zero. |
| */ |
| (void)k_work_cancel_delayable(&pub_timer); |
| } |
| |
| uint8_t bt_mesh_hb_pub_set(struct bt_mesh_hb_pub *new_pub) |
| { |
| if (!new_pub || new_pub->dst == BT_MESH_ADDR_UNASSIGNED) { |
| pub_disable(); |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS) && |
| bt_mesh_is_provisioned()) { |
| bt_mesh_settings_store_schedule( |
| BT_MESH_SETTINGS_HB_PUB_PENDING); |
| } |
| |
| return STATUS_SUCCESS; |
| } |
| |
| if (!bt_mesh_subnet_get(new_pub->net_idx)) { |
| LOG_ERR("Unknown NetKey 0x%04x", new_pub->net_idx); |
| return STATUS_INVALID_NETKEY; |
| } |
| |
| new_pub->feat &= BT_MESH_FEAT_SUPPORTED; |
| pub = *new_pub; |
| |
| if (!bt_mesh_is_provisioned()) { |
| return STATUS_SUCCESS; |
| } |
| |
| /* The first Heartbeat message shall be published as soon as possible |
| * after the Heartbeat Publication Period state has been configured for |
| * periodic publishing. |
| * |
| * If the new configuration disables publishing this flushes |
| * the work item. |
| */ |
| k_work_reschedule(&pub_timer, K_NO_WAIT); |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| bt_mesh_settings_store_schedule( |
| BT_MESH_SETTINGS_HB_PUB_PENDING); |
| } |
| |
| return STATUS_SUCCESS; |
| } |
| |
| void bt_mesh_hb_pub_get(struct bt_mesh_hb_pub *get) |
| { |
| *get = pub; |
| } |
| |
| uint8_t bt_mesh_hb_sub_set(uint16_t src, uint16_t dst, uint32_t period) |
| { |
| if (src != BT_MESH_ADDR_UNASSIGNED && !BT_MESH_ADDR_IS_UNICAST(src)) { |
| LOG_WRN("Prohibited source address"); |
| return STATUS_INVALID_ADDRESS; |
| } |
| |
| if (BT_MESH_ADDR_IS_VIRTUAL(dst) || BT_MESH_ADDR_IS_RFU(dst) || |
| (BT_MESH_ADDR_IS_UNICAST(dst) && dst != bt_mesh_primary_addr())) { |
| LOG_WRN("Prohibited destination address"); |
| return STATUS_INVALID_ADDRESS; |
| } |
| |
| if (period > (1U << 16)) { |
| LOG_WRN("Prohibited subscription period %u s", period); |
| return STATUS_CANNOT_SET; |
| } |
| |
| /* Only an explicit address change to unassigned should trigger clearing |
| * of the values according to MESH/NODE/CFG/HBS/BV-02-C. |
| */ |
| if (src == BT_MESH_ADDR_UNASSIGNED || dst == BT_MESH_ADDR_UNASSIGNED) { |
| sub.src = BT_MESH_ADDR_UNASSIGNED; |
| sub.dst = BT_MESH_ADDR_UNASSIGNED; |
| sub.min_hops = 0U; |
| sub.max_hops = 0U; |
| sub.count = 0U; |
| sub.period = 0U; |
| } else if (period) { |
| sub.src = src; |
| sub.dst = dst; |
| sub.min_hops = BT_MESH_TTL_MAX; |
| sub.max_hops = 0U; |
| sub.count = 0U; |
| sub.period = period; |
| } else { |
| /* Clearing the period should stop heartbeat subscription |
| * without clearing the parameters, so we can still read them. |
| */ |
| sub.period = 0U; |
| } |
| |
| /* Start the timer, which notifies immediately if the new |
| * configuration disables the subscription. |
| */ |
| k_work_reschedule(&sub_timer, K_SECONDS(sub.period)); |
| |
| return STATUS_SUCCESS; |
| } |
| |
| void bt_mesh_hb_sub_reset_count(void) |
| { |
| sub.count = 0; |
| } |
| |
| void bt_mesh_hb_sub_get(struct bt_mesh_hb_sub *get) |
| { |
| *get = sub; |
| get->remaining = sub_remaining(); |
| } |
| |
| static void hb_unsolicited_pub_end_cb(int err, void *cb_data) |
| { |
| if (!err) { |
| notify_pub_sent(); |
| } |
| } |
| |
| void bt_mesh_hb_feature_changed(uint16_t features) |
| { |
| static const struct bt_mesh_send_cb pub_cb = { |
| .end = hb_unsolicited_pub_end_cb, |
| }; |
| |
| if (pub.dst == BT_MESH_ADDR_UNASSIGNED) { |
| return; |
| } |
| |
| if (!(pub.feat & features)) { |
| return; |
| } |
| |
| heartbeat_send(&pub_cb, NULL); |
| } |
| |
| void bt_mesh_hb_init(void) |
| { |
| pub.net_idx = BT_MESH_KEY_UNUSED; |
| k_work_init_delayable(&pub_timer, hb_publish); |
| k_work_init_delayable(&sub_timer, sub_end); |
| } |
| |
| void bt_mesh_hb_start(void) |
| { |
| if (pub.count && pub.period) { |
| LOG_DBG("Starting heartbeat publication"); |
| k_work_reschedule(&pub_timer, K_NO_WAIT); |
| } |
| } |
| |
| void bt_mesh_hb_suspend(void) |
| { |
| /* Best-effort suspend. This cannot guarantee that an |
| * in-progress publish will not complete. |
| */ |
| (void)k_work_cancel_delayable(&pub_timer); |
| } |
| |
| void bt_mesh_hb_resume(void) |
| { |
| if (pub.period && pub.count) { |
| LOG_DBG("Starting heartbeat publication"); |
| k_work_reschedule(&pub_timer, K_NO_WAIT); |
| } |
| } |
| |
| static int hb_pub_set(const char *name, size_t len_rd, |
| settings_read_cb read_cb, void *cb_arg) |
| { |
| struct bt_mesh_hb_pub pub; |
| struct hb_pub_val hb_val; |
| int err; |
| |
| err = bt_mesh_settings_set(read_cb, cb_arg, &hb_val, sizeof(hb_val)); |
| if (err) { |
| LOG_ERR("Failed to set \'hb_val\'"); |
| return err; |
| } |
| |
| pub.dst = hb_val.dst; |
| pub.period = bt_mesh_hb_pwr2(hb_val.period); |
| pub.ttl = hb_val.ttl; |
| pub.feat = hb_val.feat; |
| pub.net_idx = hb_val.net_idx; |
| |
| if (hb_val.indefinite) { |
| pub.count = 0xffff; |
| } else { |
| pub.count = 0U; |
| } |
| |
| (void)bt_mesh_hb_pub_set(&pub); |
| |
| LOG_DBG("Restored heartbeat publication"); |
| |
| return 0; |
| } |
| |
| BT_MESH_SETTINGS_DEFINE(pub, "HBPub", hb_pub_set); |
| |
| void bt_mesh_hb_pub_pending_store(void) |
| { |
| struct bt_mesh_hb_pub pub; |
| struct hb_pub_val val; |
| int err; |
| |
| bt_mesh_hb_pub_get(&pub); |
| if (pub.dst == BT_MESH_ADDR_UNASSIGNED) { |
| err = settings_delete("bt/mesh/HBPub"); |
| } else { |
| val.indefinite = (pub.count == 0xffff); |
| val.dst = pub.dst; |
| val.period = bt_mesh_hb_log(pub.period); |
| val.ttl = pub.ttl; |
| val.feat = pub.feat; |
| val.net_idx = pub.net_idx; |
| |
| err = settings_save_one("bt/mesh/HBPub", &val, sizeof(val)); |
| } |
| |
| if (err) { |
| LOG_ERR("Failed to store Heartbeat Publication"); |
| } else { |
| LOG_DBG("Stored Heartbeat Publication"); |
| } |
| } |