blob: 20f2847e9f1748abb7325d7ef793aacfc29d4a89 [file] [log] [blame]
/* ssd16xx_regs.h - Registers definition for SSD16XX compatible controller */
/*
* Copyright (c) 2018 PHYTEC Messtechnik GmbH
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef __SSD16XX_REGS_H__
#define __SSD16XX_REGS_H__
#define SSD16XX_CMD_GDO_CTRL 0x01
#define SSD16XX_CMD_GDV_CTRL 0x03
#define SSD16XX_CMD_SDV_CTRL 0x04
#define SSD16XX_CMD_SOFTSTART 0x0c
#define SSD16XX_CMD_GSCAN_START 0x0f
#define SSD16XX_CMD_SLEEP_MODE 0x10
#define SSD16XX_CMD_ENTRY_MODE 0x11
#define SSD16XX_CMD_SW_RESET 0x12
#define SSD16XX_CMD_TSENSOR_SELECTION 0x18
#define SSD16XX_CMD_TSENS_CTRL 0x1a
#define SSD16XX_CMD_MASTER_ACTIVATION 0x20
#define SSD16XX_CMD_UPDATE_CTRL1 0x21
#define SSD16XX_CMD_UPDATE_CTRL2 0x22
#define SSD16XX_CMD_WRITE_RAM 0x24
#define SSD16XX_CMD_WRITE_RED_RAM 0x26
#define SSD16XX_CMD_VCOM_SENSE 0x28
#define SSD16XX_CMD_VCOM_SENSE_DURATON 0x29
#define SSD16XX_CMD_PRGM_VCOM_OTP 0x2a
#define SSD16XX_CMD_VCOM_VOLTAGE 0x2c
#define SSD16XX_CMD_PRGM_WS_OTP 0x30
#define SSD16XX_CMD_LOAD_WS_OTP 0x31
#define SSD16XX_CMD_UPDATE_LUT 0x32
#define SSD16XX_CMD_PRGM_OTP_SELECTION 0x36
#define SSD16XX_CMD_OTP_SELECTION_CTRL 0x37
#define SSD16XX_CMD_DUMMY_LINE 0x3a
#define SSD16XX_CMD_GATE_LINE_WIDTH 0x3b
#define SSD16XX_CMD_BWF_CTRL 0x3c
#define SSD16XX_CMD_RAM_XPOS_CTRL 0x44
#define SSD16XX_CMD_RAM_YPOS_CTRL 0x45
#define SSD16XX_CMD_RAM_XPOS_CNTR 0x4e
#define SSD16XX_CMD_RAM_YPOS_CNTR 0x4f
/* Data entry sequence modes */
#define SSD16XX_DATA_ENTRY_MASK 0x07
#define SSD16XX_DATA_ENTRY_XDYDX 0x00
#define SSD16XX_DATA_ENTRY_XIYDX 0x01
#define SSD16XX_DATA_ENTRY_XDYIX 0x02
#define SSD16XX_DATA_ENTRY_XIYIX 0x03
#define SSD16XX_DATA_ENTRY_XDYDY 0x04
#define SSD16XX_DATA_ENTRY_XIYDY 0x05
#define SSD16XX_DATA_ENTRY_XDYIY 0x06
#define SSD16XX_DATA_ENTRY_XIYIY 0x07
/* Options for display update */
#define SSD16XX_CTRL1_INITIAL_UPDATE_LL 0x00
#define SSD16XX_CTRL1_INITIAL_UPDATE_LH 0x01
#define SSD16XX_CTRL1_INITIAL_UPDATE_HL 0x02
#define SSD16XX_CTRL1_INITIAL_UPDATE_HH 0x03
/* Options for display update sequence */
#define SSD16XX_CTRL2_ENABLE_CLK 0x80
#define SSD16XX_CTRL2_ENABLE_ANALOG 0x40
#define SSD16XX_CTRL2_LOAD_TEMPERATURE 0x20
#define SSD16XX_CTRL2_LOAD_LUT 0x10
#define SSD16XX_CTRL2_TO_INITIAL 0x08
#define SSD16XX_CTRL2_TO_PATTERN 0x04
#define SSD16XX_CTRL2_DISABLE_ANALOG 0x02
#define SSD16XX_CTRL2_DISABLE_CLK 0x01
#define SSD16XX_SLEEP_MODE_DSM 0x01
#define SSD16XX_SLEEP_MODE_PON 0x00
/* Default values */
#define SSD16XX_VAL_DUMMY_LINE 0x1a
#define SSD16XX_VAL_GATE_LWIDTH 0x08
/* time constants in ms */
#define SSD16XX_RESET_DELAY 1
#define SSD16XX_BUSY_DELAY 1
#endif /* __SSD16XX_REGS_H__ */