blob: 1f9b8df22e049ce23c13c5cf7381d31397d624a8 [file] [log] [blame]
/* W5500 Stand-alone Ethernet Controller with SPI
*
* Copyright (c) 2020 Linumiz
* Author: Parthiban Nallathambi <parthiban@linumiz.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT wiznet_w5500
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(eth_w5500, CONFIG_ETHERNET_LOG_LEVEL);
#include <zephyr/zephyr.h>
#include <zephyr/device.h>
#include <string.h>
#include <errno.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/spi.h>
#include <zephyr/net/net_pkt.h>
#include <zephyr/net/net_if.h>
#include <zephyr/net/ethernet.h>
#include <ethernet/eth_stats.h>
#include "eth.h"
#include "eth_w5500_priv.h"
#define WIZNET_OUI_B0 0x00
#define WIZNET_OUI_B1 0x08
#define WIZNET_OUI_B2 0xdc
#define W5500_SPI_BLOCK_SELECT(addr) (((addr) >> 16) & 0x1f)
#define W5500_SPI_READ_CONTROL(addr) (W5500_SPI_BLOCK_SELECT(addr) << 3)
#define W5500_SPI_WRITE_CONTROL(addr) \
((W5500_SPI_BLOCK_SELECT(addr) << 3) | BIT(2))
static int w5500_spi_read(const struct device *dev, uint32_t addr,
uint8_t *data, uint32_t len)
{
const struct w5500_config *cfg = dev->config;
int ret;
/* 3 bytes as 0x010203 during command phase */
uint8_t tmp[len + 3];
uint8_t cmd[3] = {
addr >> 8,
addr,
W5500_SPI_READ_CONTROL(addr)
};
const struct spi_buf tx_buf = {
.buf = cmd,
.len = ARRAY_SIZE(cmd),
};
const struct spi_buf_set tx = {
.buffers = &tx_buf,
.count = 1,
};
const struct spi_buf rx_buf = {
.buf = tmp,
.len = ARRAY_SIZE(tmp),
};
const struct spi_buf_set rx = {
.buffers = &rx_buf,
.count = 1,
};
ret = spi_transceive_dt(&cfg->spi, &tx, &rx);
if (!ret) {
/* skip the default dummy 0x010203 */
memcpy(data, &tmp[3], len);
}
return ret;
}
static int w5500_spi_write(const struct device *dev, uint32_t addr,
uint8_t *data, uint32_t len)
{
const struct w5500_config *cfg = dev->config;
int ret;
uint8_t cmd[3] = {
addr >> 8,
addr,
W5500_SPI_WRITE_CONTROL(addr),
};
const struct spi_buf tx_buf[2] = {
{
.buf = cmd,
.len = ARRAY_SIZE(cmd),
},
{
.buf = data,
.len = len,
},
};
const struct spi_buf_set tx = {
.buffers = tx_buf,
.count = ARRAY_SIZE(tx_buf),
};
ret = spi_write_dt(&cfg->spi, &tx);
return ret;
}
static int w5500_readbuf(const struct device *dev, uint16_t offset, uint8_t *buf,
int len)
{
uint32_t addr;
int remain = 0;
int ret;
const uint32_t mem_start = W5500_Sn_RX_MEM_START;
const uint16_t mem_size = W5500_RX_MEM_SIZE;
offset %= mem_size;
addr = mem_start + offset;
if (offset + len > mem_size) {
remain = (offset + len) % mem_size;
len = mem_size - offset;
}
ret = w5500_spi_read(dev, addr, buf, len);
if (ret || !remain) {
return ret;
}
return w5500_spi_read(dev, mem_start, buf + len, remain);
}
static int w5500_writebuf(const struct device *dev, uint16_t offset, uint8_t *buf,
int len)
{
uint32_t addr;
int ret = 0;
int remain = 0;
const uint32_t mem_start = W5500_Sn_TX_MEM_START;
const uint32_t mem_size = W5500_TX_MEM_SIZE;
offset %= mem_size;
addr = mem_start + offset;
if (offset + len > mem_size) {
remain = (offset + len) % mem_size;
len = mem_size - offset;
}
ret = w5500_spi_write(dev, addr, buf, len);
if (ret || !remain) {
return ret;
}
return w5500_spi_write(dev, mem_start, buf + len, remain);
}
static int w5500_command(const struct device *dev, uint8_t cmd)
{
uint8_t reg;
uint64_t end = sys_clock_timeout_end_calc(K_MSEC(100));
w5500_spi_write(dev, W5500_S0_CR, &cmd, 1);
while (1) {
w5500_spi_read(dev, W5500_S0_CR, &reg, 1);
if (!reg) {
break;
}
int64_t remaining = end - sys_clock_tick_get();
if (remaining <= 0) {
return -EIO;
}
k_busy_wait(W5500_PHY_ACCESS_DELAY);
}
return 0;
}
static int w5500_tx(const struct device *dev, struct net_pkt *pkt)
{
struct w5500_runtime *ctx = dev->data;
uint16_t len = net_pkt_get_len(pkt);
uint16_t offset;
uint8_t off[2];
int ret;
w5500_spi_read(dev, W5500_S0_TX_WR, off, 2);
offset = sys_get_be16(off);
if (net_pkt_read(pkt, ctx->buf, len)) {
return -EIO;
}
ret = w5500_writebuf(dev, offset, ctx->buf, len);
if (ret < 0) {
return ret;
}
sys_put_be16(offset + len, off);
w5500_spi_write(dev, W5500_S0_TX_WR, off, 2);
w5500_command(dev, S0_CR_SEND);
if (k_sem_take(&ctx->tx_sem, K_MSEC(10))) {
return -EIO;
}
return 0;
}
static void w5500_rx(const struct device *dev)
{
uint8_t header[2];
uint8_t tmp[2];
uint16_t off;
uint16_t rx_len;
uint16_t rx_buf_len;
uint16_t read_len;
uint16_t reader;
struct net_buf *pkt_buf = NULL;
struct net_pkt *pkt;
struct w5500_runtime *ctx = dev->data;
const struct w5500_config *config = dev->config;
w5500_spi_read(dev, W5500_S0_RX_RSR, tmp, 2);
rx_buf_len = sys_get_be16(tmp);
if (rx_buf_len == 0) {
return;
}
w5500_spi_read(dev, W5500_S0_RX_RD, tmp, 2);
off = sys_get_be16(tmp);
w5500_readbuf(dev, off, header, 2);
rx_len = sys_get_be16(header) - 2;
pkt = net_pkt_rx_alloc_with_buffer(ctx->iface, rx_len,
AF_UNSPEC, 0, K_MSEC(config->timeout));
if (!pkt) {
eth_stats_update_errors_rx(ctx->iface);
return;
}
pkt_buf = pkt->buffer;
read_len = rx_len;
reader = off + 2;
do {
size_t frag_len;
uint8_t *data_ptr;
size_t frame_len;
data_ptr = pkt_buf->data;
frag_len = net_buf_tailroom(pkt_buf);
if (read_len > frag_len) {
frame_len = frag_len;
} else {
frame_len = read_len;
}
w5500_readbuf(dev, reader, data_ptr, frame_len);
net_buf_add(pkt_buf, frame_len);
reader += frame_len;
read_len -= frame_len;
pkt_buf = pkt_buf->frags;
} while (read_len > 0);
if (net_recv_data(ctx->iface, pkt) < 0) {
net_pkt_unref(pkt);
}
sys_put_be16(off + 2 + rx_len, tmp);
w5500_spi_write(dev, W5500_S0_RX_RD, tmp, 2);
w5500_command(dev, S0_CR_RECV);
}
static void w5500_thread(const struct device *dev)
{
uint8_t ir;
struct w5500_runtime *ctx = dev->data;
const struct w5500_config *config = dev->config;
while (true) {
k_sem_take(&ctx->int_sem, K_FOREVER);
while (gpio_pin_get_dt(&(config->interrupt))) {
/* Read interrupt */
w5500_spi_read(dev, W5500_S0_IR, &ir, 1);
if (ir) {
/* Clear interrupt */
w5500_spi_write(dev, W5500_S0_IR, &ir, 1);
LOG_DBG("IR received");
if (ir & S0_IR_SENDOK) {
k_sem_give(&ctx->tx_sem);
LOG_DBG("TX Done");
}
if (ir & S0_IR_RECV) {
w5500_rx(dev);
LOG_DBG("RX Done");
}
}
}
}
}
static void w5500_iface_init(struct net_if *iface)
{
const struct device *dev = net_if_get_device(iface);
struct w5500_runtime *ctx = dev->data;
net_if_set_link_addr(iface, ctx->mac_addr,
sizeof(ctx->mac_addr),
NET_LINK_ETHERNET);
if (!ctx->iface) {
ctx->iface = iface;
}
ethernet_init(iface);
}
static enum ethernet_hw_caps w5500_get_capabilities(const struct device *dev)
{
ARG_UNUSED(dev);
return ETHERNET_LINK_10BASE_T | ETHERNET_LINK_100BASE_T
#if defined(CONFIG_NET_PROMISCUOUS_MODE)
| ETHERNET_PROMISC_MODE
#endif
;
}
static int w5500_set_config(const struct device *dev,
enum ethernet_config_type type,
const struct ethernet_config *config)
{
uint8_t mode;
uint8_t mr = W5500_S0_MR_MF;
w5500_spi_read(dev, W5500_S0_MR, &mode, 1);
if (IS_ENABLED(CONFIG_NET_PROMISCUOUS_MODE) &&
type == ETHERNET_CONFIG_TYPE_PROMISC_MODE) {
if (config->promisc_mode) {
if (!(mode & BIT(mr)))
return -EALREADY;
}
/* clear */
WRITE_BIT(mode, mr, 0);
} else {
if (mode & BIT(mr)) {
return -EALREADY;
}
/* set */
WRITE_BIT(mode, mr, 1);
}
return w5500_spi_write(dev, W5500_S0_MR, &mode, 1);
}
static int w5500_hw_start(const struct device *dev)
{
uint8_t mode = S0_MR_MACRAW;
uint8_t mask = IR_S0;
w5500_spi_write(dev, W5500_S0_MR, &mode, 1);
w5500_command(dev, S0_CR_OPEN);
/* enable interrupt */
w5500_spi_write(dev, W5500_SIMR, &mask, 1);
return 0;
}
static int w5500_hw_stop(const struct device *dev)
{
uint8_t mask = 0;
/* disable interrupt */
w5500_spi_write(dev, W5500_SIMR, &mask, 1);
w5500_command(dev, S0_CR_CLOSE);
return 0;
}
static struct ethernet_api w5500_api_funcs = {
.iface_api.init = w5500_iface_init,
.get_capabilities = w5500_get_capabilities,
.set_config = w5500_set_config,
.start = w5500_hw_start,
.stop = w5500_hw_stop,
.send = w5500_tx,
};
static int w5500_hw_reset(const struct device *dev)
{
int ret;
uint8_t mask = 0;
uint8_t tmp = MR_RST;
ret = w5500_spi_write(dev, W5500_MR, &tmp, 1);
if (ret < 0) {
return ret;
}
k_msleep(5);
tmp = MR_PB;
w5500_spi_write(dev, W5500_MR, &tmp, 1);
/* disable interrupt */
return w5500_spi_write(dev, W5500_SIMR, &mask, 1);
}
static void w5500_gpio_callback(const struct device *dev,
struct gpio_callback *cb,
uint32_t pins)
{
struct w5500_runtime *ctx =
CONTAINER_OF(cb, struct w5500_runtime, gpio_cb);
k_sem_give(&ctx->int_sem);
}
static void w5500_set_macaddr(const struct device *dev)
{
struct w5500_runtime *ctx = dev->data;
/* override vendor bytes */
memset(ctx->mac_addr, '\0', sizeof(ctx->mac_addr));
ctx->mac_addr[0] = WIZNET_OUI_B0;
ctx->mac_addr[1] = WIZNET_OUI_B1;
ctx->mac_addr[2] = WIZNET_OUI_B2;
if (ctx->generate_mac) {
ctx->generate_mac(ctx->mac_addr);
}
w5500_spi_write(dev, W5500_SHAR, ctx->mac_addr, sizeof(ctx->mac_addr));
}
static void w5500_memory_configure(const struct device *dev)
{
int i;
uint8_t mem = 0x10;
/* Configure RX & TX memory to 16K */
w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(0), &mem, 1);
w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(0), &mem, 1);
mem = 0;
for (i = 1; i < 8; i++) {
w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(i), &mem, 1);
w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(i), &mem, 1);
}
}
static void w5500_random_mac(uint8_t *mac_addr)
{
gen_random_mac(mac_addr, WIZNET_OUI_B0, WIZNET_OUI_B1, WIZNET_OUI_B2);
}
static int w5500_init(const struct device *dev)
{
int err;
uint8_t rtr[2];
const struct w5500_config *config = dev->config;
struct w5500_runtime *ctx = dev->data;
if (!spi_is_ready(&config->spi)) {
LOG_ERR("SPI master port %s not ready", config->spi.bus->name);
return -EINVAL;
}
if (!device_is_ready(config->interrupt.port)) {
LOG_ERR("GPIO port %s not ready", config->interrupt.port->name);
return -EINVAL;
}
if (gpio_pin_configure_dt(&config->interrupt, GPIO_INPUT)) {
LOG_ERR("Unable to configure GPIO pin %u", config->interrupt.pin);
return -EINVAL;
}
gpio_init_callback(&(ctx->gpio_cb), w5500_gpio_callback,
BIT(config->interrupt.pin));
if (gpio_add_callback(config->interrupt.port, &(ctx->gpio_cb))) {
return -EINVAL;
}
gpio_pin_interrupt_configure_dt(&config->interrupt,
GPIO_INT_EDGE_FALLING);
if (config->reset.port) {
if (!device_is_ready(config->reset.port)) {
LOG_ERR("GPIO port %s not ready", config->reset.port->name);
return -EINVAL;
}
if (gpio_pin_configure_dt(&config->reset, GPIO_OUTPUT)) {
LOG_ERR("Unable to configure GPIO pin %u", config->reset.pin);
return -EINVAL;
}
gpio_pin_set_dt(&config->reset, 0);
k_usleep(500);
gpio_pin_set_dt(&config->reset, 1);
}
err = w5500_hw_reset(dev);
if (err) {
LOG_ERR("Reset failed");
return err;
}
w5500_set_macaddr(dev);
w5500_memory_configure(dev);
/* check retry time value */
w5500_spi_read(dev, W5500_RTR, rtr, 2);
if (sys_get_be16(rtr) != RTR_DEFAULT) {
LOG_ERR("Unable to read RTR register");
return -ENODEV;
}
k_thread_create(&ctx->thread, ctx->thread_stack,
CONFIG_ETH_W5500_RX_THREAD_STACK_SIZE,
(k_thread_entry_t)w5500_thread,
(void *)dev, NULL, NULL,
K_PRIO_COOP(CONFIG_ETH_W5500_RX_THREAD_PRIO),
0, K_NO_WAIT);
LOG_INF("W5500 Initialized");
return 0;
}
static struct w5500_runtime w5500_0_runtime = {
.generate_mac = w5500_random_mac,
.tx_sem = Z_SEM_INITIALIZER(w5500_0_runtime.tx_sem,
1, UINT_MAX),
.int_sem = Z_SEM_INITIALIZER(w5500_0_runtime.int_sem,
0, UINT_MAX),
};
static const struct w5500_config w5500_0_config = {
.spi = SPI_DT_SPEC_INST_GET(0, SPI_WORD_SET(8), 0),
.interrupt = GPIO_DT_SPEC_INST_GET(0, int_gpios),
.reset = GPIO_DT_SPEC_INST_GET_OR(0, reset_gpios, { 0 }),
.timeout = CONFIG_ETH_W5500_TIMEOUT,
};
ETH_NET_DEVICE_DT_INST_DEFINE(0,
w5500_init, NULL,
&w5500_0_runtime, &w5500_0_config,
CONFIG_ETH_INIT_PRIORITY, &w5500_api_funcs, NET_ETH_MTU);