| # ADXL362 Three-Axis Digital Accelerometers |
| |
| # Copyright (c) 2017 IpTronix S.r.l. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig ADXL362 |
| bool "ADXL362 sensor" |
| depends on SPI |
| help |
| Enable driver for ADXL362 Three-Axis Digital Accelerometers. |
| |
| if ADXL362 |
| |
| choice |
| prompt "Accelerometer range setting" |
| default ADXL362_ACCEL_RANGE_RUNTIME |
| |
| config ADXL362_ACCEL_RANGE_RUNTIME |
| bool "Set at runtime." |
| |
| config ADXL362_ACCEL_RANGE_2G |
| bool "2G" |
| |
| config ADXL362_ACCEL_RANGE_4G |
| bool "4G" |
| |
| config ADXL362_ACCEL_RANGE_8G |
| bool "8G" |
| |
| endchoice |
| |
| choice |
| prompt "Accelerometer sampling frequency." |
| default ADXL362_ACCEL_ODR_RUNTIME |
| |
| config ADXL362_ACCEL_ODR_RUNTIME |
| bool "Set at runtime." |
| |
| config ADXL362_ACCEL_ODR_12_5 |
| bool "12.5 Hz" |
| |
| config ADXL362_ACCEL_ODR_25 |
| bool "25 Hz" |
| |
| config ADXL362_ACCEL_ODR_50 |
| bool "50 Hz" |
| |
| config ADXL362_ACCEL_ODR_100 |
| bool "100 Hz" |
| |
| config ADXL362_ACCEL_ODR_200 |
| bool "200 Hz" |
| |
| config ADXL362_ACCEL_ODR_400 |
| bool "400 Hz" |
| |
| endchoice |
| |
| choice |
| prompt "Trigger mode" |
| default ADXL362_TRIGGER_NONE |
| help |
| Specify the type of triggering used by the driver. |
| |
| config ADXL362_TRIGGER_NONE |
| bool "No trigger" |
| |
| config ADXL362_TRIGGER_GLOBAL_THREAD |
| bool "Use global thread" |
| depends on GPIO |
| select ADXL362_TRIGGER |
| |
| config ADXL362_TRIGGER_OWN_THREAD |
| bool "Use own thread" |
| depends on GPIO |
| select ADXL362_TRIGGER |
| |
| endchoice |
| |
| config ADXL362_TRIGGER |
| bool |
| |
| config ADXL362_THREAD_PRIORITY |
| int "Thread priority" |
| depends on ADXL362_TRIGGER_OWN_THREAD && ADXL362_TRIGGER |
| default 10 |
| help |
| Priority of thread used by the driver to handle interrupts. |
| |
| config ADXL362_THREAD_STACK_SIZE |
| int "Thread stack size" |
| depends on ADXL362_TRIGGER_OWN_THREAD && ADXL362_TRIGGER |
| default 1024 |
| help |
| Stack size of thread used by the driver to handle interrupts. |
| |
| config ADXL362_ACTIVITY_THRESHOLD |
| int "Upper threshold value" |
| default 1000 |
| help |
| Unsigned value that the adxl362 samples are |
| compared to in activity trigger mode. |
| |
| config ADXL362_ACTIVITY_TIME |
| int "Upper threshold time" |
| default 1 |
| help |
| 8 bit value written to the activity timer register |
| 0 to 254, seconds is this value div by ODR |
| |
| config ADXL362_INACTIVITY_THRESHOLD |
| int "Lower threshold value" |
| default 100 |
| help |
| Unsigned value that the adxl362 samples are |
| compared to in inactivity trigger mode. |
| |
| config ADXL362_INACTIVITY_TIME |
| int "Lower threshold time" |
| default 1 |
| help |
| 16 bit value written to the activity timer register |
| 0 to 65535, seconds is this value div by ODR |
| |
| config ADXL362_INTERRUPT_MODE |
| int "Activity and inactivity interrupt mode" |
| default 0 |
| help |
| Unsigned value that sets the ADXL362 in different |
| interrupt modes. |
| 0 - Default mode |
| 1 - Linked mode |
| 3 - Loop mode |
| |
| config ADXL362_ABS_REF_MODE |
| int "Absolute or referenced interrupt" |
| default 0 |
| help |
| Unsigned value that sets the ADXL362 interrupt |
| mode in either absolute or referenced mode. |
| 0 - Absolute mode |
| 1 - Referenced mode |
| |
| endif # ADXL362 |
