drivers/sensor/ens210/ens210.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2018 Alexander Wachter.
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #define DT_DRV_COMPAT ams_ens210

 #include <zephyr/device.h>
 #include <zephyr/drivers/i2c.h>
 #include <zephyr/kernel.h>
 #include <zephyr/sys/byteorder.h>
 #include <zephyr/sys/util.h>
 #include <zephyr/drivers/sensor.h>
 #include <zephyr/sys/__assert.h>
 #include <zephyr/logging/log.h>
 #include "ens210.h"

 LOG_MODULE_REGISTER(ENS210, CONFIG_SENSOR_LOG_LEVEL);

 #ifdef CONFIG_ENS210_CRC_CHECK
 static uint32_t ens210_crc7(uint32_t bitstream)
 {
 	uint32_t polynomial = (ENS210_CRC7_POLY << (ENS210_CRC7_DATA_WIDTH - 1));
 	uint32_t bit = ENS210_CRC7_DATA_MSB << ENS210_CRC7_WIDTH;
 	uint32_t val = (bitstream << ENS210_CRC7_WIDTH) | ENS210_CRC7_IVEC;

 	while (bit & (ENS210_CRC7_DATA_MASK << ENS210_CRC7_WIDTH)) {
 		if (bit & val) {
 			val ^= polynomial;
 		}

 		bit >>= 1;
 		polynomial >>= 1;
 	}

 	return val;
 }
 #endif /* CONFIG_ENS210_CRC_CHECK */

 #if defined(CONFIG_ENS210_TEMPERATURE_SINGLE) \
 		|| defined(CONFIG_ENS210_HUMIDITY_SINGLE)
 static int ens210_measure(const struct device *dev, enum sensor_channel chan)
 {
 	struct ens210_data *drv_data = dev->data;
 	const struct ens210_config *config = dev->config;
 	uint8_t buf;
 	int ret;
 	const struct ens210_sens_start sense_start = {
 		.t_start = ENS210_T_START && (chan == SENSOR_CHAN_ALL
 				|| chan == SENSOR_CHAN_AMBIENT_TEMP),
 		.h_start = ENS210_H_START && (chan == SENSOR_CHAN_ALL
 				|| chan == SENSOR_CHAN_HUMIDITY)
 	};

 	/* Start measuring */
 	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SENS_START, *(uint8_t *)&sense_start);

 	if (ret < 0) {
 		LOG_ERR("Failed to set SENS_START to 0x%x",
 				*(uint8_t *)&sense_start);
 		return -EIO;
 	}

 	/* Wait for measurement to be completed */
 	do {
 		k_sleep(K_MSEC(2));
 		ret = i2c_reg_read_byte_dt(&config->i2c, ENS210_REG_SENS_START, &buf);

 		if (ret < 0) {
 			LOG_ERR("Failed to read SENS_STAT");
 		}
 	} while (buf & *(uint8_t *)&sense_start);

 	return ret;
 }
 #endif /* Single shot mode */

 static int ens210_sample_fetch(const struct device *dev,
 			       enum sensor_channel chan)
 {
 	struct ens210_data *drv_data = dev->data;
 	const struct ens210_config *config = dev->config;
 	struct ens210_value_data data[2];
 	int ret, cnt;

 #ifdef CONFIG_ENS210_CRC_CHECK
 	uint32_t temp_valid, humidity_valid;
 #endif /* CONFIG_ENS210_CRC_CHECK */

 	__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL
 			|| chan == SENSOR_CHAN_AMBIENT_TEMP
 			|| chan == SENSOR_CHAN_HUMIDITY);

 #if defined(CONFIG_ENS210_TEMPERATURE_SINGLE) \
 		|| defined(CONFIG_ENS210_HUMIDITY_SINGLE)
 	ret = ens210_measure(dev, chan);
 	if (ret < 0) {
 		LOG_ERR("Failed to measure");
 		return ret;
 	}
 #endif /* Single shot mode */

 	for (cnt = 0; cnt <= CONFIG_ENS210_MAX_READ_RETRIES; cnt++) {
 		ret = i2c_burst_read_dt(&config->i2c, ENS210_REG_T_VAL, (uint8_t *)&data,
 					sizeof(data));
 		if (ret < 0) {
 			LOG_ERR("Failed to read data");
 			continue;
 		}

 		/* Get temperature value */
 		if (chan == SENSOR_CHAN_ALL || chan == SENSOR_CHAN_AMBIENT_TEMP) {

 			if (!data[0].valid) {
 				LOG_WRN("Temperature not valid");
 				continue;
 			}

 #ifdef CONFIG_ENS210_CRC_CHECK
 			temp_valid = data[0].val |
 					(data[0].valid << (sizeof(data[0].val) * 8));

 			if (ens210_crc7(temp_valid) != data[0].crc7) {
 				LOG_WRN("Temperature CRC error");
 				continue;
 			}
 #endif /* CONFIG_ENS210_CRC_CHECK */

 			drv_data->temp = data[0];
 		}

 		/* Get humidity value */
 		if (chan == SENSOR_CHAN_ALL || chan == SENSOR_CHAN_HUMIDITY) {

 			if (!data[1].valid) {
 				LOG_WRN("Humidity not valid");
 				continue;
 			}

 #ifdef CONFIG_ENS210_CRC_CHECK
 			humidity_valid = data[1].val |
 					  (data[1].valid << (sizeof(data[1].val) * 8));

 			if (ens210_crc7(humidity_valid) != data[1].crc7) {
 				LOG_WRN("Humidity CRC error");
 				continue;
 			}
 #endif /* CONFIG_ENS210_CRC_CHECK */

 			drv_data->humidity = data[1];
 		}

 		return 0;
 	}

 	return -EIO;
 }

 static int ens210_channel_get(const struct device *dev,
 			      enum sensor_channel chan,
 			      struct sensor_value *val)
 {
 	struct ens210_data *drv_data = dev->data;
 	int32_t temp_frac;
 	int32_t humidity_frac;

 	switch (chan) {
 	case SENSOR_CHAN_AMBIENT_TEMP:
 		/* Temperature is in 1/64 Kelvin. Subtract 273.15 for Celsius */
 		temp_frac = sys_le16_to_cpu(drv_data->temp.val) * (1000000 / 64);
 		temp_frac -= 273150000;

 		val->val1 = temp_frac / 1000000;
 		val->val2 = temp_frac % 1000000;
 		break;
 	case  SENSOR_CHAN_HUMIDITY:
 		humidity_frac = sys_le16_to_cpu(drv_data->humidity.val) *
 				(1000000 / 512);
 		val->val1 = humidity_frac / 1000000;
 		val->val2 = humidity_frac % 1000000;

 		break;
 	default:
 		return -ENOTSUP;
 	}

 	return 0;
 }

 static int ens210_sys_reset(const struct device *dev)
 {
 	const struct ens210_config *config = dev->config;

 	const struct ens210_sys_ctrl sys_ctrl = {
 			.low_power = 0,
 			.reset = 1
 	};
 	int ret;

 	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SYS_CTRL, *(uint8_t *)&sys_ctrl);
 	if (ret < 0) {
 		LOG_ERR("Failed to set SYS_CTRL to 0x%x", *(uint8_t *)&sys_ctrl);
 	}
 	return ret;
 }

 static int ens210_sys_enable(const struct device *dev, uint8_t low_power)
 {
 	const struct ens210_config *config = dev->config;

 	const struct ens210_sys_ctrl sys_ctrl = {
 			.low_power = low_power,
 			.reset = 0
 	};
 	int ret;

 	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SYS_CTRL, *(uint8_t *)&sys_ctrl);
 	if (ret < 0) {
 		LOG_ERR("Failed to set SYS_CTRL to 0x%x", *(uint8_t *)&sys_ctrl);
 	}
 	return ret;
 }

 static int ens210_wait_boot(const struct device *dev)
 {
 	const struct ens210_config *config = dev->config;

 	int cnt;
 	int ret;
 	struct ens210_sys_stat sys_stat;

 	for (cnt = 0; cnt <= CONFIG_ENS210_MAX_STAT_RETRIES; cnt++) {
 		ret = i2c_reg_read_byte_dt(&config->i2c, ENS210_REG_SYS_STAT, (uint8_t *)&sys_stat);

 		if (ret < 0) {
 			k_sleep(K_MSEC(1));
 			continue;
 		}

 		if (sys_stat.sys_active) {
 			return 0;
 		}

 		if (cnt == 0) {
 			ens210_sys_reset(dev);
 		}

 		ens210_sys_enable(dev, 0);

 		k_sleep(K_MSEC(2));
 	}

 	if (ret < 0) {
 		LOG_ERR("Failed to read SYS_STATE");
 	}


 	LOG_ERR("Sensor is not in active state");
 	return -EIO;
 }

 static const struct sensor_driver_api en210_driver_api = {
 	.sample_fetch = ens210_sample_fetch,
 	.channel_get = ens210_channel_get,
 };

 static int ens210_init(const struct device *dev)
 {
 	const struct ens210_config *config = dev->config;
 	const struct ens210_sens_run sense_run = {
 		.t_run = ENS210_T_RUN,
 		.h_run = ENS210_H_RUN
 	};

 #if defined(CONFIG_ENS210_TEMPERATURE_CONTINUOUS) \
 	|| defined(CONFIG_ENS210_HUMIDITY_CONTINUOUS)
 	const struct ens210_sens_start sense_start = {
 		.t_start = ENS210_T_RUN,
 		.h_start = ENS210_H_RUN
 	};
 #endif

 	int ret;
 	uint16_t part_id;

 	if (!device_is_ready(config->i2c.bus)) {
 		LOG_ERR("I2C bus device not ready");
 		return -ENODEV;
 	}

 	/* Wait until the device is ready. */
 	ret = ens210_wait_boot(dev);
 	if (ret < 0) {
 		return -EIO;
 	}

 	/* Check Hardware ID. This is only possible after device is ready
 	 * and active
 	 */
 	ret = i2c_burst_read_dt(&config->i2c, ENS210_REG_PART_ID, (uint8_t *)&part_id,
 				sizeof(part_id));
 	if (ret < 0) {
 		LOG_ERR("Failed to read Part ID register");
 		return -EIO;
 	}

 	if (part_id != ENS210_PART_ID) {
 		LOG_ERR("Part ID does not match. Want 0x%x, got 0x%x",
 			    ENS210_PART_ID, part_id);
 		return -EIO;
 	}

 	/* Enable low power mode */
 	if ((ENS210_T_RUN | ENS210_H_RUN) == 0) {
 		ens210_sys_enable(dev, 1);
 	}

 	/* Set measurement mode*/
 	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SENS_RUN, *(uint8_t *)&sense_run);
 	if (ret < 0) {
 		LOG_ERR("Failed to set SENS_RUN to 0x%x",
 			    *(uint8_t *)&sense_run);
 		return -EIO;
 	}

 #if defined(CONFIG_ENS210_TEMPERATURE_CONTINUOUS) \
 	|| defined(CONFIG_ENS210_HUMIDITY_CONTINUOUS)
 	/* Start measuring */
 	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SENS_START, *(uint8_t *)&sense_start);
 	if (ret < 0) {
 		LOG_ERR("Failed to set SENS_START to 0x%x",
 			    *(uint8_t *)&sense_start);
 		return -EIO;
 	}
 #endif
 	return 0;
 }

 static struct ens210_data ens210_data_inst;

 static const struct ens210_config ens210_config_inst = {
 	.i2c = I2C_DT_SPEC_INST_GET(0),
 };

 DEVICE_DT_INST_DEFINE(0, ens210_init, NULL, &ens210_data_inst,
 		      &ens210_config_inst, POST_KERNEL, CONFIG_SENSOR_INIT_PRIORITY,
 		      &en210_driver_api);
	/*
	* Copyright (c) 2018 Alexander Wachter.
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#define DT_DRV_COMPAT ams_ens210

	#include <zephyr/device.h>
	#include <zephyr/drivers/i2c.h>
	#include <zephyr/kernel.h>
	#include <zephyr/sys/byteorder.h>
	#include <zephyr/sys/util.h>
	#include <zephyr/drivers/sensor.h>
	#include <zephyr/sys/__assert.h>
	#include <zephyr/logging/log.h>
	#include "ens210.h"

	LOG_MODULE_REGISTER(ENS210, CONFIG_SENSOR_LOG_LEVEL);

	#ifdef CONFIG_ENS210_CRC_CHECK
	static uint32_t ens210_crc7(uint32_t bitstream)
	{
	uint32_t polynomial = (ENS210_CRC7_POLY << (ENS210_CRC7_DATA_WIDTH - 1));
	uint32_t bit = ENS210_CRC7_DATA_MSB << ENS210_CRC7_WIDTH;
	uint32_t val = (bitstream << ENS210_CRC7_WIDTH) \| ENS210_CRC7_IVEC;

	while (bit & (ENS210_CRC7_DATA_MASK << ENS210_CRC7_WIDTH)) {
	if (bit & val) {
	val ^= polynomial;
	}

	bit >>= 1;
	polynomial >>= 1;
	}

	return val;
	}
	#endif /* CONFIG_ENS210_CRC_CHECK */

	#if defined(CONFIG_ENS210_TEMPERATURE_SINGLE) \
	\|\| defined(CONFIG_ENS210_HUMIDITY_SINGLE)
	static int ens210_measure(const struct device *dev, enum sensor_channel chan)
	{
	struct ens210_data *drv_data = dev->data;
	const struct ens210_config *config = dev->config;
	uint8_t buf;
	int ret;
	const struct ens210_sens_start sense_start = {
	.t_start = ENS210_T_START && (chan == SENSOR_CHAN_ALL
	\|\| chan == SENSOR_CHAN_AMBIENT_TEMP),
	.h_start = ENS210_H_START && (chan == SENSOR_CHAN_ALL
	\|\| chan == SENSOR_CHAN_HUMIDITY)
	};

	/* Start measuring */
	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SENS_START, (uint8_t )&sense_start);

	if (ret < 0) {
	LOG_ERR("Failed to set SENS_START to 0x%x",
	(uint8_t )&sense_start);
	return -EIO;
	}

	/* Wait for measurement to be completed */
	do {
	k_sleep(K_MSEC(2));
	ret = i2c_reg_read_byte_dt(&config->i2c, ENS210_REG_SENS_START, &buf);

	if (ret < 0) {
	LOG_ERR("Failed to read SENS_STAT");
	}
	} while (buf & (uint8_t )&sense_start);

	return ret;
	}
	#endif /* Single shot mode */

	static int ens210_sample_fetch(const struct device *dev,
	enum sensor_channel chan)
	{
	struct ens210_data *drv_data = dev->data;
	const struct ens210_config *config = dev->config;
	struct ens210_value_data data[2];
	int ret, cnt;

	#ifdef CONFIG_ENS210_CRC_CHECK
	uint32_t temp_valid, humidity_valid;
	#endif /* CONFIG_ENS210_CRC_CHECK */

	__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL
	\|\| chan == SENSOR_CHAN_AMBIENT_TEMP
	\|\| chan == SENSOR_CHAN_HUMIDITY);

	#if defined(CONFIG_ENS210_TEMPERATURE_SINGLE) \
	\|\| defined(CONFIG_ENS210_HUMIDITY_SINGLE)
	ret = ens210_measure(dev, chan);
	if (ret < 0) {
	LOG_ERR("Failed to measure");
	return ret;
	}
	#endif /* Single shot mode */

	for (cnt = 0; cnt <= CONFIG_ENS210_MAX_READ_RETRIES; cnt++) {
	ret = i2c_burst_read_dt(&config->i2c, ENS210_REG_T_VAL, (uint8_t *)&data,
	sizeof(data));
	if (ret < 0) {
	LOG_ERR("Failed to read data");
	continue;
	}

	/* Get temperature value */
	if (chan == SENSOR_CHAN_ALL \|\| chan == SENSOR_CHAN_AMBIENT_TEMP) {

	if (!data[0].valid) {
	LOG_WRN("Temperature not valid");
	continue;
	}

	#ifdef CONFIG_ENS210_CRC_CHECK
	temp_valid = data[0].val \|
	(data[0].valid << (sizeof(data[0].val) * 8));

	if (ens210_crc7(temp_valid) != data[0].crc7) {
	LOG_WRN("Temperature CRC error");
	continue;
	}
	#endif /* CONFIG_ENS210_CRC_CHECK */

	drv_data->temp = data[0];
	}

	/* Get humidity value */
	if (chan == SENSOR_CHAN_ALL \|\| chan == SENSOR_CHAN_HUMIDITY) {

	if (!data[1].valid) {
	LOG_WRN("Humidity not valid");
	continue;
	}

	#ifdef CONFIG_ENS210_CRC_CHECK
	humidity_valid = data[1].val \|
	(data[1].valid << (sizeof(data[1].val) * 8));

	if (ens210_crc7(humidity_valid) != data[1].crc7) {
	LOG_WRN("Humidity CRC error");
	continue;
	}
	#endif /* CONFIG_ENS210_CRC_CHECK */

	drv_data->humidity = data[1];
	}

	return 0;
	}

	return -EIO;
	}

	static int ens210_channel_get(const struct device *dev,
	enum sensor_channel chan,
	struct sensor_value *val)
	{
	struct ens210_data *drv_data = dev->data;
	int32_t temp_frac;
	int32_t humidity_frac;

	switch (chan) {
	case SENSOR_CHAN_AMBIENT_TEMP:
	/* Temperature is in 1/64 Kelvin. Subtract 273.15 for Celsius */
	temp_frac = sys_le16_to_cpu(drv_data->temp.val) * (1000000 / 64);
	temp_frac -= 273150000;

	val->val1 = temp_frac / 1000000;
	val->val2 = temp_frac % 1000000;
	break;
	case SENSOR_CHAN_HUMIDITY:
	humidity_frac = sys_le16_to_cpu(drv_data->humidity.val) *
	(1000000 / 512);
	val->val1 = humidity_frac / 1000000;
	val->val2 = humidity_frac % 1000000;

	break;
	default:
	return -ENOTSUP;
	}

	return 0;
	}

	static int ens210_sys_reset(const struct device *dev)
	{
	const struct ens210_config *config = dev->config;

	const struct ens210_sys_ctrl sys_ctrl = {
	.low_power = 0,
	.reset = 1
	};
	int ret;

	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SYS_CTRL, (uint8_t )&sys_ctrl);
	if (ret < 0) {
	LOG_ERR("Failed to set SYS_CTRL to 0x%x", (uint8_t )&sys_ctrl);
	}
	return ret;
	}

	static int ens210_sys_enable(const struct device *dev, uint8_t low_power)
	{
	const struct ens210_config *config = dev->config;

	const struct ens210_sys_ctrl sys_ctrl = {
	.low_power = low_power,
	.reset = 0
	};
	int ret;

	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SYS_CTRL, (uint8_t )&sys_ctrl);
	if (ret < 0) {
	LOG_ERR("Failed to set SYS_CTRL to 0x%x", (uint8_t )&sys_ctrl);
	}
	return ret;
	}

	static int ens210_wait_boot(const struct device *dev)
	{
	const struct ens210_config *config = dev->config;

	int cnt;
	int ret;
	struct ens210_sys_stat sys_stat;

	for (cnt = 0; cnt <= CONFIG_ENS210_MAX_STAT_RETRIES; cnt++) {
	ret = i2c_reg_read_byte_dt(&config->i2c, ENS210_REG_SYS_STAT, (uint8_t *)&sys_stat);

	if (ret < 0) {
	k_sleep(K_MSEC(1));
	continue;
	}

	if (sys_stat.sys_active) {
	return 0;
	}

	if (cnt == 0) {
	ens210_sys_reset(dev);
	}

	ens210_sys_enable(dev, 0);

	k_sleep(K_MSEC(2));
	}

	if (ret < 0) {
	LOG_ERR("Failed to read SYS_STATE");
	}


	LOG_ERR("Sensor is not in active state");
	return -EIO;
	}

	static const struct sensor_driver_api en210_driver_api = {
	.sample_fetch = ens210_sample_fetch,
	.channel_get = ens210_channel_get,
	};

	static int ens210_init(const struct device *dev)
	{
	const struct ens210_config *config = dev->config;
	const struct ens210_sens_run sense_run = {
	.t_run = ENS210_T_RUN,
	.h_run = ENS210_H_RUN
	};

	#if defined(CONFIG_ENS210_TEMPERATURE_CONTINUOUS) \
	\|\| defined(CONFIG_ENS210_HUMIDITY_CONTINUOUS)
	const struct ens210_sens_start sense_start = {
	.t_start = ENS210_T_RUN,
	.h_start = ENS210_H_RUN
	};
	#endif

	int ret;
	uint16_t part_id;

	if (!device_is_ready(config->i2c.bus)) {
	LOG_ERR("I2C bus device not ready");
	return -ENODEV;
	}

	/* Wait until the device is ready. */
	ret = ens210_wait_boot(dev);
	if (ret < 0) {
	return -EIO;
	}

	/* Check Hardware ID. This is only possible after device is ready
	* and active
	*/
	ret = i2c_burst_read_dt(&config->i2c, ENS210_REG_PART_ID, (uint8_t *)&part_id,
	sizeof(part_id));
	if (ret < 0) {
	LOG_ERR("Failed to read Part ID register");
	return -EIO;
	}

	if (part_id != ENS210_PART_ID) {
	LOG_ERR("Part ID does not match. Want 0x%x, got 0x%x",
	ENS210_PART_ID, part_id);
	return -EIO;
	}

	/* Enable low power mode */
	if ((ENS210_T_RUN \| ENS210_H_RUN) == 0) {
	ens210_sys_enable(dev, 1);
	}

	/* Set measurement mode*/
	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SENS_RUN, (uint8_t )&sense_run);
	if (ret < 0) {
	LOG_ERR("Failed to set SENS_RUN to 0x%x",
	(uint8_t )&sense_run);
	return -EIO;
	}

	#if defined(CONFIG_ENS210_TEMPERATURE_CONTINUOUS) \
	\|\| defined(CONFIG_ENS210_HUMIDITY_CONTINUOUS)
	/* Start measuring */
	ret = i2c_reg_write_byte_dt(&config->i2c, ENS210_REG_SENS_START, (uint8_t )&sense_start);
	if (ret < 0) {
	LOG_ERR("Failed to set SENS_START to 0x%x",
	(uint8_t )&sense_start);
	return -EIO;
	}
	#endif
	return 0;
	}

	static struct ens210_data ens210_data_inst;

	static const struct ens210_config ens210_config_inst = {
	.i2c = I2C_DT_SPEC_INST_GET(0),
	};

	DEVICE_DT_INST_DEFINE(0, ens210_init, NULL, &ens210_data_inst,
	&ens210_config_inst, POST_KERNEL, CONFIG_SENSOR_INIT_PRIORITY,
	&en210_driver_api);