blob: 9cb7071310f648d5c60f3c360846c6955fb65d11 [file] [log] [blame]
# Copyright (c) 2020 Stephanos Ioannidis <root@stephanos.io>
# Copyright (c) 2020-2021 Gerson Fernando Budke <nandojve@gmail.com>
# SPDX-License-Identifier: Apache-2.0
include:
- name: ethernet.yaml
- name: pinctrl-device.yaml
properties:
reg:
required: true
num-queues:
type: int
required: true
description: |
Number of hardware TX and RX queues.
max-frame-size:
type: int
default: 1518
description: |
Maximum ethernet frame size. The current ethernet frame sizes
supported by hardware are 1518, 1536 and 10240 (jumbo frames). This
means that normally gmac will reject any frame above max-frame-size
value. The default value is 1518, which represents an usual
IEEE 802.3 ethernet frame:
Ethernet Frame [ 14 MAC HEADER | 1500 MTU | 4 FCS ] = 1518 bytes
When using value 1536 it is possible extend ethernet MAC HEADER up
to 32 bytes. The hardware have support to jumbo frames and it can be
enabled by selecting the value 10240.
max-speed:
type: int
default: 100
description: |
This specifies maximum speed in Mbit/s supported by the device. The
gmac driver supports 10Mbit/s and 100Mbit/s. Using 100, as default
value, enables driver to configure 10 and 100Mbit/s speeds.
phy-connection-type:
type: string
enum:
- "rmii"
- "mii"
default: "rmii"
description: |
Phy connection type define the physical interface connection between
PHY and MAC. The default value uses gmac register reset value, which
represents Reduced Media-Independent Interface (RMII) mode.
This property must be used with pinctrl-0.