blob: 76b21ca63dedbd8ceca8449a2cd0b964fdb625fa [file] [log] [blame]
/*
* Copyright (c) 2015 Intel corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief Public interface for configuring interrupts
*/
#ifndef _IRQ_H_
#define _IRQ_H_
/* Pull in the arch-specific implementations */
#include <arch/cpu.h>
#ifndef _ASMLANGUAGE
#include <toolchain/gcc.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup isr_apis Interrupt Service Routine APIs
* @ingroup kernel_apis
* @{
*/
/**
* @brief Initialize an interrupt handler.
*
* This routine initializes an interrupt handler for an IRQ. The IRQ must be
* subsequently enabled before the interrupt handler begins servicing
* interrupts.
*
* @warning
* Although this routine is invoked at run-time, all of its arguments must be
* computable by the compiler at build time.
*
* @param irq_p IRQ line number.
* @param priority_p Interrupt priority.
* @param isr_p Address of interrupt service routine.
* @param isr_param_p Parameter passed to interrupt service routine.
* @param flags_p Architecture-specific IRQ configuration flags..
*
* @return Interrupt vector assigned to this interrupt.
*/
#define IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p) \
_ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
/**
* @brief Initialize a 'direct' interrupt handler.
*
* This routine initializes an interrupt handler for an IRQ. The IRQ must be
* subsequently enabled via irq_enable() before the interrupt handler begins
* servicing interrupts.
*
* These ISRs are designed for performance-critical interrupt handling and do
* not go through common interrupt handling code. They must be implemented in
* such a way that it is safe to put them directly in the vector table. For
* ISRs written in C, The ISR_DIRECT_DECLARE() macro will do this
* automatically. For ISRs written in assembly it is entirely up to the
* developer to ensure that the right steps are taken.
*
* This type of interrupt currently has a few limitations compared to normal
* Zephyr interrupts:
* - No parameters are passed to the ISR.
* - No stack switch is done, the ISR will run on the interrupted context's
* stack, unless the architecture automatically does the stack switch in HW.
* - Interrupt locking state is unchanged from how the HW sets it when the ISR
* runs. On arches that enter ISRs with interrupts locked, they will remain
* locked.
* - Scheduling decisions are now optional, controlled by the return value of
* ISRs implemented with the ISR_DIRECT_DECLARE() macro
* - The call into the OS to exit power management idle state is now optional.
* Normal interrupts always do this before the ISR is run, but when it runs
* is now controlled by the placement of a ISR_DIRECT_PM() macro, or omitted
* entirely.
*
* @warning
* Although this routine is invoked at run-time, all of its arguments must be
* computable by the compiler at build time.
*
* @param irq_p IRQ line number.
* @param priority_p Interrupt priority.
* @param isr_p Address of interrupt service routine.
* @param flags_p Architecture-specific IRQ configuration flags.
*
* @return Interrupt vector assigned to this interrupt.
*/
#define IRQ_DIRECT_CONNECT(irq_p, priority_p, isr_p, flags_p) \
_ARCH_IRQ_DIRECT_CONNECT(irq_p, priority_p, isr_p, flags_p)
/**
* @brief Common tasks before executing the body of an ISR
*
* This macro must be at the beginning of all direct interrupts and performs
* minimal architecture-specific tasks before the ISR itself can run. It takes
* no arguments and has no return value.
*/
#define ISR_DIRECT_HEADER() _ARCH_ISR_DIRECT_HEADER()
/**
* @brief Common tasks before exiting the body of an ISR
*
* This macro must be at the end of all direct interrupts and performs
* minimal architecture-specific tasks like EOI. It has no return value.
*
* In a normal interrupt, a check is done at end of interrupt to invoke
* _Swap() logic if the current thread is preemptible and there is another
* thread ready to run in the kernel's ready queue cache. This is now optional
* and controlled by the check_reschedule argument. If unsure, set to nonzero.
* On systems that do stack switching and nested interrupt tracking in software,
* _Swap() should only be called if this was a non-nested interrupt.
*
* @param check_reschedule If nonzero, additionally invoke scheduling logic
*/
#define ISR_DIRECT_FOOTER(check_reschedule) \
_ARCH_ISR_DIRECT_FOOTER(check_reschedule)
/**
* @brief Perform power management idle exit logic
*
* This macro may optionally be invoked somewhere in between IRQ_DIRECT_HEADER()
* and IRQ_DIRECT_FOOTER() invocations. It performs tasks necessary to
* exit power management idle state. It takes no parameters and returns no
* arguments. It may be omitted, but be careful!
*/
#define ISR_DIRECT_PM() _ARCH_ISR_DIRECT_PM()
/**
* @brief Helper macro to declare a direct interrupt service routine.
*
* This will declare the function in a proper way and automatically include
* the ISR_DIRECT_FOOTER() and ISR_DIRECT_HEADER() macros. The function should
* return nonzero status if a scheduling decision should potentially be made.
* See ISR_DIRECT_FOOTER() for more details on the scheduling decision.
*
* For architectures that support 'regular' and 'fast' interrupt types, where
* these interrupt types require different assembly language handling of
* registers by the ISR, this will always generate code for the 'fast'
* interrupt type.
*
* Example usage:
*
* ISR_DIRECT_DECLARE(my_isr)
* {
* bool done = do_stuff();
* ISR_DIRECT_PM(); <-- done after do_stuff() due to latency concerns
* if (!done) {
* return 0; <-- Don't bother checking if we have to _Swap()
* }
* k_sem_give(some_sem);
* return 1;
* }
*
* @param name symbol name of the ISR
*/
#define ISR_DIRECT_DECLARE(name) _ARCH_ISR_DIRECT_DECLARE(name)
/**
* @brief Lock interrupts.
*
* This routine disables all interrupts on the CPU. It returns an unsigned
* integer "lock-out key", which is an architecture-dependent indicator of
* whether interrupts were locked prior to the call. The lock-out key must be
* passed to irq_unlock() to re-enable interrupts.
*
* This routine can be called recursively, as long as the caller keeps track
* of each lock-out key that is generated. Interrupts are re-enabled by
* passing each of the keys to irq_unlock() in the reverse order they were
* acquired. (That is, each call to irq_lock() must be balanced by
* a corresponding call to irq_unlock().)
*
* @note
* This routine can be called by ISRs or by threads. If it is called by a
* thread, the interrupt lock is thread-specific; this means that interrupts
* remain disabled only while the thread is running. If the thread performs an
* operation that allows another thread to run (for example, giving a semaphore
* or sleeping for N milliseconds), the interrupt lock no longer applies and
* interrupts may be re-enabled while other processing occurs. When the thread
* once again becomes the current thread, the kernel re-establishes its
* interrupt lock; this ensures the thread won't be interrupted until it has
* explicitly released the interrupt lock it established.
*
* @warning
* The lock-out key should never be used to manually re-enable interrupts
* or to inspect or manipulate the contents of the CPU's interrupt bits.
*
* @return Lock-out key.
*/
#define irq_lock() _arch_irq_lock()
/**
* @brief Unlock interrupts.
*
* This routine reverses the effect of a previous call to irq_lock() using
* the associated lock-out key. The caller must call the routine once for
* each time it called irq_lock(), supplying the keys in the reverse order
* they were acquired, before interrupts are enabled.
*
* @note Can be called by ISRs.
*
* @param key Lock-out key generated by irq_lock().
*
* @return N/A
*/
#define irq_unlock(key) _arch_irq_unlock(key)
/**
* @brief Enable an IRQ.
*
* This routine enables interrupts from source @a irq.
*
* @param irq IRQ line.
*
* @return N/A
*/
#define irq_enable(irq) _arch_irq_enable(irq)
/**
* @brief Disable an IRQ.
*
* This routine disables interrupts from source @a irq.
*
* @param irq IRQ line.
*
* @return N/A
*/
#define irq_disable(irq) _arch_irq_disable(irq)
/**
* @brief Get IRQ enable state.
*
* This routine indicates if interrupts from source @a irq are enabled.
*
* @param irq IRQ line.
*
* @return interrupt enable state, true or false
*/
#define irq_is_enabled(irq) _arch_irq_is_enabled(irq)
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* ASMLANGUAGE */
#endif /* _IRQ_H_ */