blob: 34d43e89e2dc844feb00d505bff39e8e92e1f364 [file] [log] [blame]
/*
* Copyright (c) 2016 Piotr Mienkowski
*
* SPDX-License-Identifier: Apache-2.0
*/
/** @file
* @brief Definitions for IEEE 802.3, Section 2 MII compatible PHY transceivers
*/
#ifndef _MII_H_
#define _MII_H_
/* MII management registers */
#define MII_BMCR 0x0 /** Basic Mode Control Register */
#define MII_BMSR 0x1 /** Basic Mode Status Register */
#define MII_PHYID1R 0x2 /** PHY ID 1 Register */
#define MII_PHYID2R 0x3 /** PHY ID 2 Register */
#define MII_ANAR 0x4 /** Auto-Negotiation Advertisement Register */
#define MII_ANLPAR 0x5 /** Auto-Negotiation Link Partner Ability Reg */
#define MII_ANER 0x6 /** Auto-Negotiation Expansion Register */
#define MII_ANNPTR 0x7 /** Auto-Negotiation Next Page Transmit Register */
#define MII_ANLPRNPR 0x8 /** Auto-Negotiation Link Partner Received Next Page Reg */
#define MII_MMD_ACR 0xd /** MMD Access Control Register */
#define MII_MMD_AADR 0xe /** MMD Access Address Data Register */
#define MII_ESTAT 0xf /** Extended Status Register */
/* Basic Mode Control Register (BMCR) bit definitions */
#define MII_BMCR_RESET (1 << 15) /** PHY reset */
#define MII_BMCR_LOOPBACK (1 << 14) /** enable loopback mode */
#define MII_BMCR_SPEED_LSB (1 << 13) /** 10=1000Mbps 01=100Mbps; 00=10Mbps */
#define MII_BMCR_AUTONEG_ENABLE (1 << 12) /** Auto-Negotiation enable */
#define MII_BMCR_POWER_DOWN (1 << 11) /** power down mode */
#define MII_BMCR_ISOLATE (1 << 10) /** isolate electrically PHY from MII */
#define MII_BMCR_AUTONEG_RESTART (1 << 9) /** restart auto-negotiation */
#define MII_BMCR_DUPLEX_MODE (1 << 8) /** full duplex mode */
#define MII_BMCR_SPEED_MSB (1 << 6) /** 10=1000Mbps 01=100Mbps; 00=10Mbps */
#define MII_BMCR_SPEED_MASK (1 << 6 | 1 << 13) /** Link Speed Field */
#define MII_BMCR_SPEED_10 (0 << 6 | 0 << 13) /** select speed 10 Mb/s */
#define MII_BMCR_SPEED_100 (0 << 6 | 1 << 13) /** select speed 100 Mb/s */
#define MII_BMCR_SPEED_1000 (1 << 6 | 0 << 13) /** select speed 1000 Mb/s */
/* Basic Mode Status Register (BMSR) bit definitions */
#define MII_BMSR_100BASE_T4 (1 << 15) /** 100BASE-T4 capable */
#define MII_BMSR_100BASE_X_FULL (1 << 14) /** 100BASE-X full duplex capable */
#define MII_BMSR_100BASE_X_HALF (1 << 13) /** 100BASE-X half duplex capable */
#define MII_BMSR_10_FULL (1 << 12) /** 10 Mb/s full duplex capable */
#define MII_BMSR_10_HALF (1 << 11) /** 10 Mb/s half duplex capable */
#define MII_BMSR_100BASE_T2_FULL (1 << 10) /** 100BASE-T2 full duplex capable */
#define MII_BMSR_100BASE_T2_HALF (1 << 9) /** 100BASE-T2 half duplex capable */
#define MII_BMSR_EXTEND_STATUS (1 << 8) /** extend status information in reg 15 */
#define MII_BMSR_MF_PREAMB_SUPPR (1 << 6) /** PHY accepts management frames with preamble suppressed */
#define MII_BMSR_AUTONEG_COMPLETE (1 << 5) /** Auto-negotiation process completed */
#define MII_BMSR_REMOTE_FAULT (1 << 4) /** remote fault detected */
#define MII_BMSR_AUTONEG_ABILITY (1 << 3) /** PHY is able to perform Auto-Negotiation */
#define MII_BMSR_LINK_STATUS (1 << 2) /** link is up */
#define MII_BMSR_JABBER_DETECT (1 << 1) /** jabber condition detected */
#define MII_BMSR_EXTEND_CAPAB (1 << 0) /** extended register capabilities */
/* Auto-negotiation Advertisement Register (ANAR) bit definitions */
/* Auto-negotiation Link Partner Ability Register (ANLPAR) bit definitions */
#define MII_ADVERTISE_NEXT_PAGE (1 << 15) /** next page */
#define MII_ADVERTISE_LPACK (1 << 14) /** link partner acknowledge response */
#define MII_ADVERTISE_REMOTE_FAULT (1 << 13) /** remote fault */
#define MII_ADVERTISE_ASYM_PAUSE (1 << 11) /** try for asymmetric pause */
#define MII_ADVERTISE_PAUSE (1 << 10) /** try for pause */
#define MII_ADVERTISE_100BASE_T4 (1 << 9) /** try for 100BASE-T4 support */
#define MII_ADVERTISE_100_FULL (1 << 8) /** try for 100BASE-X full duplex support */
#define MII_ADVERTISE_100_HALF (1 << 7) /** try for 100BASE-X support */
#define MII_ADVERTISE_10_FULL (1 << 6) /** try for 10 Mb/s full duplex support */
#define MII_ADVERTISE_10_HALF (1 << 5) /** try for 10 Mb/s half duplex support */
#define MII_ADVERTISE_SEL_MASK (0x1F << 0) /** Selector Field */
#define MII_ADVERTISE_SEL_IEEE_802_3 0x01
#define MII_ADVERTISE_ALL (MII_ADVERTISE_10_HALF | MII_ADVERTISE_10_FULL |\
MII_ADVERTISE_100_HALF | MII_ADVERTISE_100_FULL |\
MII_ADVERTISE_SEL_IEEE_802_3)
#endif /* _MII_H_ */