| # Kconfig - Pinmux configuration options |
| |
| # |
| # Copyright (c) 2015 Intel Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # PinMux options |
| # |
| menuconfig PINMUX |
| bool "Enable platform pinmux driver" |
| default n |
| |
| config PINMUX_BASE |
| hex "Base Address" |
| depends on PINMUX |
| help |
| On platforms where there is a base pinmux register, set this value to |
| enable the driver to directly access the memory. |
| |
| config PINMUX_NUM_PINS |
| int "Number of Pins to configure" |
| depends on PINMUX |
| help |
| Select the number of pins for the pinmux to operate on. |
| |
| config PINMUX_DEV |
| bool "Configure pinmux for early board testing" |
| depends on PINMUX |
| default n |
| help |
| Enables the use of the pinmux_set and pinmux_get functions for early |
| prototyping on new hardware. WARNING: When using these options, it |
| is possible to permanently damage the hardware. |
| |
| config PINMUX_GALILEO_EXP0_NAME |
| string "Name of the GPIO expander 0" |
| depends on PINMUX && PLATFORM_GALILEO |
| default "EXP0" |
| help |
| The name of the GPIO expander labelled as EXP0 in the schematic. |
| |
| config PINMUX_GALILEO_EXP1_NAME |
| string "Name of the GPIO expander 1" |
| depends on PINMUX && PLATFORM_GALILEO |
| default "EXP1" |
| help |
| The name of the GPIO expander labelled as EXP1 in the schematic. |
| |
| config PINMUX_GALILEO_EXP2_NAME |
| string "Name of the GPIO expander 2" |
| depends on PINMUX && PLATFORM_GALILEO |
| default "EXP2" |
| help |
| The name of the GPIO expander labelled as EXP2 in the schematic. |
| |
| config PINMUX_GALILEO_PWM0_NAME |
| string "Name of the PWM LED expander 0" |
| depends on PINMUX && PLATFORM_GALILEO |
| default "PWM0" |
| help |
| The name of the PWM LED expander labelled as PWM0 in the schematic. |
| |
| config PINMUX_GALILEO_GPIO_DW_NAME |
| string "Name of the DesignWare GPIO" |
| depends on PINMUX && PLATFORM_GALILEO |
| default "GPIO_0" |
| help |
| The name of the DesignWare GPIO with GPIO<0>..GPIO<7> in the schematic. |
| |
| config PINMUX_GALILEO_GPIO_INTEL_CW_NAME |
| string "Name of the Legacy Bridge Core Well GPIO" |
| depends on PINMUX && PLATFORM_GALILEO |
| default "GPIO_M0" |
| help |
| The name of the Legacy Bridge Core Well GPIO with GPIO<8>..GPIO<9> |
| in the schematic. |
| |
| config PINMUX_GALILEO_GPIO_INTEL_RW_NAME |
| string "Name of the Legacy Bridge Resume Well GPIO" |
| depends on PINMUX && PLATFORM_GALILEO |
| default "GPIO_M1" |
| help |
| The name of the Legacy Bridge Resume Well GPIO with |
| GPIO_SUS<0>..GPIO_SUS<5> in the schematic. |
