cmake/modules/dts.cmake

# SPDX-License-Identifier: Apache-2.0

include_guard(GLOBAL)

include(extensions)
include(python)
include(boards)
include(pre_dt)
find_package(HostTools)
find_package(Dtc 1.4.6)

# This module makes information from the devicetree available to
# various build stages, as well as to other arbitrary Python scripts:
#
#   - To Zephyr and application source code files, as a C macro API
#     defined in <zephyr/devicetree.h>
#
#   - To other arbitrary Python scripts (like twister) using a
#     serialized edtlib.EDT object in Python's pickle format
#     (https://docs.python.org/3/library/pickle.html)
#
#   - To users as a final devicetree source (DTS) file which can
#     be used for debugging
#
#   - To CMake files, after this module has finished running, using
#     devicetree extensions defined in cmake/modules/extensions.cmake
#
#   - To Kconfig files, both using some Kconfig symbols we generate
#     here as well as the extension functions defined in
#     scripts/kconfig/kconfigfunctions.py
#
# See the specific API documentation for each of these cases for more
# information on what is currently available to you.
#
# We rely on the C preprocessor, the devicetree python package, and
# files in scripts/dts to make all this work. We also optionally will
# run the dtc tool if it is found, in order to catch any additional
# warnings or errors it generates.
#
# Outcome:
#
# 1. The following has happened:
#
#    - The pre_dt module has been included; refer to its outcome
#      section for more information on the consequences
#    - DTS_SOURCE: set to the path to the devicetree file which
#      was used, if one was provided or found
#    - ${BINARY_DIR_INCLUDE_GENERATED}/devicetree_generated.h exists
#
# 2. The following has happened if a devicetree was found and
#    no errors occurred:
#
#    - CACHED_DTS_ROOT_BINDINGS is set in the cache to the
#      value of DTS_ROOT_BINDINGS
#    - DTS_ROOT_BINDINGS is set to a ;-list of locations where DT
#      bindings were found
#    - ${PROJECT_BINARY_DIR}/zephyr.dts exists
#    - ${PROJECT_BINARY_DIR}/edt.pickle exists
#    - ${KCONFIG_BINARY_DIR}/Kconfig.dts exists
#    - the build system will be regenerated if any devicetree files
#      used in this build change, including transitive includes
#    - the devicetree extensions in the extensions.cmake module
#      will be ready for use in other CMake list files that run
#      after this module
#
# Required variables:
# - BINARY_DIR_INCLUDE_GENERATED: where to put generated include files
# - KCONFIG_BINARY_DIR: where to put generated Kconfig files
#
# Optional variables:
# - BOARD: board name to use when looking for DTS_SOURCE
# - BOARD_DIR: board directory to use when looking for DTS_SOURCE
# - BOARD_REVISION_STRING: used when looking for a board revision's
#   devicetree overlay file in BOARD_DIR
# - DTC_OVERLAY_FILE: list of devicetree overlay files which will be
#   used to modify or extend the base devicetree.
# - EXTRA_DTC_OVERLAY_FILE: list of extra devicetree overlay files.
#   This variable is is similar to DTC_OVERLAY_FILE but the files in
#   EXTRA_DTC_OVERLAY_FILE will be applied after DTC_OVERLAY_FILE and
#   thus files specified by EXTRA_DTC_OVERLAY_FILE have higher precedence.
# - EXTRA_DTC_FLAGS: list of extra command line options to pass to
#   dtc when using it to check for additional errors and warnings;
#   invalid flags are automatically filtered out of the list
# - DTS_EXTRA_CPPFLAGS: extra command line options to pass to the
#   C preprocessor when generating the devicetree from DTS_SOURCE
# - DTS_SOURCE: the devicetree source file to use may be pre-set
#   with this variable; otherwise, it defaults to
#   ${BOARD_DIR}/${BOARD}.dts
#
# Variables set by this module and not mentioned above are for internal
# use only, and may be removed, renamed, or re-purposed without prior notice.

# The directory containing devicetree related scripts.
set(DT_SCRIPTS                  ${ZEPHYR_BASE}/scripts/dts)

# This generates DT information needed by the C macro APIs,
# along with a few other things.
set(GEN_DEFINES_SCRIPT          ${DT_SCRIPTS}/gen_defines.py)
# The edtlib.EDT object in pickle format.
set(EDT_PICKLE                  ${PROJECT_BINARY_DIR}/edt.pickle)
# The generated file containing the final DTS, for debugging.
set(ZEPHYR_DTS                  ${PROJECT_BINARY_DIR}/zephyr.dts)
# The generated C header needed by <zephyr/devicetree.h>
set(DEVICETREE_GENERATED_H      ${BINARY_DIR_INCLUDE_GENERATED}/devicetree_generated.h)
# Generated build system internals.
set(DTS_POST_CPP                ${PROJECT_BINARY_DIR}/zephyr.dts.pre)
set(DTS_DEPS                    ${PROJECT_BINARY_DIR}/zephyr.dts.d)

# This generates DT information needed by the Kconfig APIs.
set(GEN_DRIVER_KCONFIG_SCRIPT   ${DT_SCRIPTS}/gen_driver_kconfig_dts.py)
# Generated Kconfig symbols go here.
set(DTS_KCONFIG                 ${KCONFIG_BINARY_DIR}/Kconfig.dts)

# This generates DT information needed by the CMake APIs.
set(GEN_DTS_CMAKE_SCRIPT        ${DT_SCRIPTS}/gen_dts_cmake.py)
# The generated information itself, which we include() after
# creating it.
set(DTS_CMAKE                   ${PROJECT_BINARY_DIR}/dts.cmake)

# The location of a file containing known vendor prefixes, relative to
# each element of DTS_ROOT. Users can define their own in their own
# modules.
set(VENDOR_PREFIXES             dts/bindings/vendor-prefixes.txt)

if(NOT DEFINED DTS_SOURCE)
  zephyr_build_string(board_string SHORT shortened_board_string
                      BOARD ${BOARD} BOARD_QUALIFIERS ${BOARD_QUALIFIERS}
  )
  if(EXISTS ${BOARD_DIR}/${shortened_board_string}.dts AND NOT BOARD_${BOARD}_SINGLE_SOC)
    message(FATAL_ERROR "Board ${ZFILE_BOARD} defines multiple SoCs.\nShortened file name "
            "(${shortened_board_string}.dts) not allowed, use '<board>_<soc>.dts' naming"
    )
  elseif(EXISTS ${BOARD_DIR}/${board_string}.dts AND EXISTS ${BOARD_DIR}/${shortened_board_string}.dts)
    message(FATAL_ERROR "Conflicting file names discovered. Cannot use both "
            "${board_string}.dts and ${shortened_board_string}.dts. "
            "Please choose one naming style, ${board_string}.dts is recommended."
    )
  elseif(EXISTS ${BOARD_DIR}/${board_string}.dts)
    set(DTS_SOURCE ${BOARD_DIR}/${board_string}.dts)
  elseif(EXISTS ${BOARD_DIR}/${shortened_board_string}.dts)
    set(DTS_SOURCE ${BOARD_DIR}/${shortened_board_string}.dts)
  endif()
endif()

if(EXISTS ${DTS_SOURCE})
  # We found a devicetree. Append all relevant dts overlays we can find...
  zephyr_file(CONF_FILES ${BOARD_DIR} DTS DTS_SOURCE)

  zephyr_file(
    CONF_FILES ${BOARD_DIR}
    DTS no_rev_suffix_dts_board_overlays
    BOARD ${BOARD}
    BOARD_QUALIFIERS ${BOARD_QUALIFIERS}
  )

  # ...but remove the ones that do not include the revision suffix
  list(REMOVE_ITEM DTS_SOURCE ${no_rev_suffix_dts_board_overlays})
else()
  # If we don't have a devicetree, provide an empty stub
  set(DTS_SOURCE ${ZEPHYR_BASE}/boards/common/stub.dts)
endif()

#
# Find all the DTS files we need to concatenate and preprocess, as
# well as all the devicetree bindings and vendor prefixes associated
# with them.
#

zephyr_file(CONF_FILES ${BOARD_EXTENSION_DIRS} DTS board_extension_dts_files)

set(dts_files
  ${DTS_SOURCE}
  ${board_extension_dts_files}
  ${shield_dts_files}
  )

if(DTC_OVERLAY_FILE)
  zephyr_list(TRANSFORM DTC_OVERLAY_FILE NORMALIZE_PATHS
              OUTPUT_VARIABLE DTC_OVERLAY_FILE_AS_LIST)
  list(APPEND
    dts_files
    ${DTC_OVERLAY_FILE_AS_LIST}
    )
endif()

if(EXTRA_DTC_OVERLAY_FILE)
  zephyr_list(TRANSFORM EXTRA_DTC_OVERLAY_FILE NORMALIZE_PATHS
              OUTPUT_VARIABLE EXTRA_DTC_OVERLAY_FILE_AS_LIST)
  list(APPEND
    dts_files
    ${EXTRA_DTC_OVERLAY_FILE_AS_LIST}
    )
endif()

set(i 0)
foreach(dts_file ${dts_files})
  if(i EQUAL 0)
    message(STATUS "Found BOARD.dts: ${dts_file}")
  else()
    message(STATUS "Found devicetree overlay: ${dts_file}")
  endif()

  math(EXPR i "${i}+1")
endforeach()

unset(DTS_ROOT_BINDINGS)
foreach(dts_root ${DTS_ROOT})
  set(bindings_path ${dts_root}/dts/bindings)
  if(EXISTS ${bindings_path})
    list(APPEND
      DTS_ROOT_BINDINGS
      ${bindings_path}
      )
  endif()

  set(vendor_prefixes ${dts_root}/${VENDOR_PREFIXES})
  if(EXISTS ${vendor_prefixes})
    list(APPEND EXTRA_GEN_DEFINES_ARGS --vendor-prefixes ${vendor_prefixes})
  endif()
endforeach()

# Cache the location of the root bindings so they can be used by
# scripts which use the build directory.
set(CACHED_DTS_ROOT_BINDINGS ${DTS_ROOT_BINDINGS} CACHE INTERNAL
  "DT bindings root directories")

#
# Run the C preprocessor on the devicetree source, so we can parse it
# (using the Python devicetree package) in later steps.
#

# TODO: Cut down on CMake configuration time by avoiding
# regeneration of devicetree_generated.h on every configure. How
# challenging is this? Can we cache the dts dependencies?

# Run the preprocessor on the DTS input files.
if(DEFINED CMAKE_DTS_PREPROCESSOR)
  set(dts_preprocessor ${CMAKE_DTS_PREPROCESSOR})
else()
  set(dts_preprocessor ${CMAKE_C_COMPILER})
endif()
zephyr_dt_preprocess(
  CPP ${dts_preprocessor}
  SOURCE_FILES ${dts_files}
  OUT_FILE ${DTS_POST_CPP}
  DEPS_FILE ${DTS_DEPS}
  EXTRA_CPPFLAGS ${DTS_EXTRA_CPPFLAGS}
  INCLUDE_DIRECTORIES ${DTS_ROOT_SYSTEM_INCLUDE_DIRS}
  WORKING_DIRECTORY ${APPLICATION_SOURCE_DIR}
  )

#
# Make sure we re-run CMake if any devicetree sources or transitive
# includes change.
#

# Parse the generated dependency file to find the DT sources that
# were included, including any transitive includes.
toolchain_parse_make_rule(${DTS_DEPS}
  include_files # Output parameter
  )

# Add the results to the list of files that, when change, force the
# build system to re-run CMake.
set_property(DIRECTORY APPEND PROPERTY
  CMAKE_CONFIGURE_DEPENDS
  ${include_files}
  ${GEN_DEFINES_SCRIPT}
  ${GEN_DRIVER_KCONFIG_SCRIPT}
  ${GEN_DTS_CMAKE_SCRIPT}
  )

#
# Run GEN_DEFINES_SCRIPT.
#

string(REPLACE ";" " " EXTRA_DTC_FLAGS_RAW "${EXTRA_DTC_FLAGS}")
set(CMD_GEN_DEFINES ${PYTHON_EXECUTABLE} ${GEN_DEFINES_SCRIPT}
--dts ${DTS_POST_CPP}
--dtc-flags '${EXTRA_DTC_FLAGS_RAW}'
--bindings-dirs ${DTS_ROOT_BINDINGS}
--header-out ${DEVICETREE_GENERATED_H}.new
--dts-out ${ZEPHYR_DTS}.new # for debugging and dtc
--edt-pickle-out ${EDT_PICKLE}
${EXTRA_GEN_DEFINES_ARGS}
)

execute_process(
  COMMAND ${CMD_GEN_DEFINES}
  WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
  RESULT_VARIABLE ret
  )
if(NOT "${ret}" STREQUAL "0")
  message(STATUS "In: ${PROJECT_BINARY_DIR}, command: ${CMD_GEN_DEFINES}")
  message(FATAL_ERROR "gen_defines.py failed with return code: ${ret}")
else()
  zephyr_file_copy(${ZEPHYR_DTS}.new ${ZEPHYR_DTS} ONLY_IF_DIFFERENT)
  zephyr_file_copy(${DEVICETREE_GENERATED_H}.new ${DEVICETREE_GENERATED_H} ONLY_IF_DIFFERENT)
  file(REMOVE ${ZEPHYR_DTS}.new ${DEVICETREE_GENERATED_H}.new)
  message(STATUS "Generated zephyr.dts: ${ZEPHYR_DTS}")
  message(STATUS "Generated devicetree_generated.h: ${DEVICETREE_GENERATED_H}")
endif()

#
# Run GEN_DRIVER_KCONFIG_SCRIPT.
#

execute_process(
  COMMAND ${PYTHON_EXECUTABLE} ${GEN_DRIVER_KCONFIG_SCRIPT}
  --kconfig-out ${DTS_KCONFIG}
  --bindings-dirs ${DTS_ROOT_BINDINGS}
  WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
  RESULT_VARIABLE ret
  )
if(NOT "${ret}" STREQUAL "0")
  message(FATAL_ERROR "gen_driver_kconfig_dts.py failed with return code: ${ret}")
endif()

#
# Run GEN_DTS_CMAKE_SCRIPT.
#

execute_process(
  COMMAND ${PYTHON_EXECUTABLE} ${GEN_DTS_CMAKE_SCRIPT}
  --edt-pickle ${EDT_PICKLE}
  --cmake-out ${DTS_CMAKE}
  WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
  RESULT_VARIABLE ret
  )
if(NOT "${ret}" STREQUAL "0")
  message(FATAL_ERROR "gen_dts_cmake.py failed with return code: ${ret}")
else()
  message(STATUS "Including generated dts.cmake file: ${DTS_CMAKE}")
  include(${DTS_CMAKE})
endif()

#
# Run dtc if it was found.
#
# This is just to generate warnings and errors; we discard the output.
#

if(DTC)

set(DTC_WARN_UNIT_ADDR_IF_ENABLED "")
check_dtc_flag("-Wunique_unit_address_if_enabled" check)
if (check)
  set(DTC_WARN_UNIT_ADDR_IF_ENABLED "-Wunique_unit_address_if_enabled")
endif()

set(DTC_NO_WARN_UNIT_ADDR "")
check_dtc_flag("-Wno-unique_unit_address" check)
if (check)
  set(DTC_NO_WARN_UNIT_ADDR "-Wno-unique_unit_address")
endif()

set(VALID_EXTRA_DTC_FLAGS "")
foreach(extra_opt ${EXTRA_DTC_FLAGS})
  check_dtc_flag(${extra_opt} check)
  if (check)
    list(APPEND VALID_EXTRA_DTC_FLAGS ${extra_opt})
  endif()
endforeach()
set(EXTRA_DTC_FLAGS ${VALID_EXTRA_DTC_FLAGS})

execute_process(
  COMMAND ${DTC}
  -O dts
  -o - # Write output to stdout, which we discard below
  -b 0
  -E unit_address_vs_reg
  ${DTC_NO_WARN_UNIT_ADDR}
  ${DTC_WARN_UNIT_ADDR_IF_ENABLED}
  ${EXTRA_DTC_FLAGS} # User settable
  ${ZEPHYR_DTS}
  OUTPUT_QUIET # Discard stdout
  WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
  RESULT_VARIABLE ret
  )

if(NOT "${ret}" STREQUAL "0")
  message(FATAL_ERROR "command failed with return code: ${ret}")
endif()
endif(DTC)