| /* |
| * Ethernet over USB device |
| * |
| * Copyright (c) 2017 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define LOG_LEVEL CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(usb_net) |
| |
| /* Enable verbose debug printing extra hexdumps */ |
| #define VERBOSE_DEBUG 0 |
| |
| /* This enables basic hexdumps */ |
| #define NET_LOG_ENABLED 0 |
| #include <net_private.h> |
| |
| #include <init.h> |
| |
| #include <usb_device.h> |
| #include <usb_common.h> |
| #include <net/ethernet.h> |
| |
| #include <usb_descriptor.h> |
| #include "netusb.h" |
| |
| static struct __netusb { |
| struct net_if *iface; |
| const struct netusb_function *func; |
| } netusb; |
| |
| #if !defined(CONFIG_USB_COMPOSITE_DEVICE) |
| /* TODO: FIXME: correct buffer size */ |
| static u8_t interface_data[300]; |
| #endif |
| |
| static int netusb_send(struct net_if *iface, struct net_pkt *pkt) |
| { |
| int ret; |
| |
| LOG_DBG("Send pkt, len %u", net_pkt_get_len(pkt)); |
| |
| if (!netusb_enabled()) { |
| LOG_ERR("interface disabled"); |
| return -ENODEV; |
| } |
| |
| ret = netusb.func->send_pkt(pkt); |
| if (ret) { |
| return ret; |
| } |
| |
| net_pkt_unref(pkt); |
| return 0; |
| } |
| |
| void netusb_recv(struct net_pkt *pkt) |
| { |
| LOG_DBG("Recv pkt, len %u", net_pkt_get_len(pkt)); |
| |
| if (net_recv_data(netusb.iface, pkt) < 0) { |
| LOG_ERR("Packet %p dropped by NET stack", pkt); |
| net_pkt_unref(pkt); |
| } |
| } |
| |
| static int netusb_connect_media(void) |
| { |
| LOG_DBG(""); |
| |
| if (!netusb_enabled()) { |
| LOG_ERR("interface disabled"); |
| return -ENODEV; |
| } |
| |
| if (!netusb.func->connect_media) { |
| return -ENOTSUP; |
| } |
| |
| return netusb.func->connect_media(true); |
| } |
| |
| static int netusb_disconnect_media(void) |
| { |
| LOG_DBG(""); |
| |
| if (!netusb_enabled()) { |
| LOG_ERR("interface disabled"); |
| return -ENODEV; |
| } |
| |
| if (!netusb.func->connect_media) { |
| return -ENOTSUP; |
| } |
| |
| return netusb.func->connect_media(false); |
| } |
| |
| void netusb_enable(const struct netusb_function *func) |
| { |
| LOG_DBG(""); |
| |
| netusb.func = func; |
| |
| net_if_up(netusb.iface); |
| netusb_connect_media(); |
| } |
| |
| void netusb_disable(void) |
| { |
| LOG_DBG(""); |
| |
| if (!netusb_enabled()) { |
| return; |
| } |
| |
| netusb.func = NULL; |
| |
| netusb_disconnect_media(); |
| net_if_down(netusb.iface); |
| } |
| |
| bool netusb_enabled(void) |
| { |
| return !!netusb.func; |
| } |
| |
| int try_write(u8_t ep, u8_t *data, u16_t len) |
| { |
| u8_t tries = 10; |
| int ret = 0; |
| |
| net_hexdump("USB <", data, len); |
| |
| while (len) { |
| u32_t wrote; |
| |
| ret = usb_write(ep, data, len, &wrote); |
| |
| switch (ret) { |
| case -EAGAIN: |
| /* |
| * In a case when host has not yet enabled endpoint |
| * to get this message we might get No Space Available |
| * error from the controller, try only several times. |
| */ |
| if (tries--) { |
| USB_WRN("Error: EAGAIN. Another try"); |
| continue; |
| } |
| |
| return ret; |
| case 0: |
| /* Check wrote bytes */ |
| break; |
| /* TODO: Handle other error codes */ |
| default: |
| USB_WRN("Error writing to ep 0x%x ret %d", ep, ret); |
| return ret; |
| } |
| |
| len -= wrote; |
| data += wrote; |
| #if VERBOSE_DEBUG |
| LOG_DBG("Wrote %u bytes, remaining %u", wrote, len); |
| #endif |
| |
| if (len) { |
| USB_WRN("Remaining bytes %d wrote %d", len, wrote); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void netusb_init(struct net_if *iface) |
| { |
| static u8_t mac[6] = { 0x00, 0x00, 0x5E, 0x00, 0x53, 0x00 }; |
| |
| LOG_DBG("netusb device initialization"); |
| |
| netusb.iface = iface; |
| |
| ethernet_init(iface); |
| |
| net_if_set_link_addr(iface, mac, sizeof(mac), NET_LINK_ETHERNET); |
| |
| net_if_down(iface); |
| |
| #ifndef CONFIG_USB_COMPOSITE_DEVICE |
| /* Linker-defined symbols bound the USB descriptor structs */ |
| extern struct usb_cfg_data __usb_data_start[]; |
| extern struct usb_cfg_data __usb_data_end[]; |
| size_t size = (__usb_data_end - __usb_data_start); |
| |
| for (size_t i = 0; i < size; i++) { |
| struct usb_cfg_data *cfg = &(__usb_data_start[i]); |
| int ret; |
| |
| LOG_DBG("Registering function %u", i); |
| |
| cfg->interface.payload_data = interface_data; |
| cfg->usb_device_description = usb_get_device_descriptor(); |
| |
| ret = usb_set_config(cfg); |
| if (ret < 0) { |
| LOG_ERR("Failed to configure USB device"); |
| return; |
| } |
| |
| ret = usb_enable(cfg); |
| if (ret < 0) { |
| LOG_ERR("Failed to enable USB"); |
| return; |
| } |
| } |
| #endif /* CONFIG_USB_COMPOSITE_DEVICE */ |
| |
| LOG_INF("netusb initialized"); |
| } |
| |
| static const struct ethernet_api netusb_api_funcs = { |
| .iface_api = { |
| .init = netusb_init, |
| .send = netusb_send, |
| }, |
| .get_capabilities = NULL, |
| }; |
| |
| static int netusb_init_dev(struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| return 0; |
| } |
| |
| NET_DEVICE_INIT(eth_netusb, "eth_netusb", netusb_init_dev, NULL, NULL, |
| CONFIG_ETH_INIT_PRIORITY, &netusb_api_funcs, ETHERNET_L2, |
| NET_L2_GET_CTX_TYPE(ETHERNET_L2), NETUSB_MTU); |