| /** |
| ****************************************************************************** |
| * @file stm32f1xx_hal_i2s.h |
| * @author MCD Application Team |
| * @brief Header file of I2S HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F1xx_HAL_I2S_H |
| #define __STM32F1xx_HAL_I2S_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f1xx_hal_def.h" |
| |
| /** @addtogroup STM32F1xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup I2S |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup I2S_Exported_Types I2S Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief I2S Init structure definition |
| */ |
| typedef struct |
| { |
| uint32_t Mode; /*!< Specifies the I2S operating mode. |
| This parameter can be a value of @ref I2S_Mode */ |
| |
| uint32_t Standard; /*!< Specifies the standard used for the I2S communication. |
| This parameter can be a value of @ref I2S_Standard */ |
| |
| uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. |
| This parameter can be a value of @ref I2S_Data_Format */ |
| |
| uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. |
| This parameter can be a value of @ref I2S_MCLK_Output */ |
| |
| uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. |
| This parameter can be a value of @ref I2S_Audio_Frequency */ |
| |
| uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. |
| This parameter can be a value of @ref I2S_Clock_Polarity */ |
| }I2S_InitTypeDef; |
| |
| /** |
| * @brief HAL State structures definition |
| */ |
| typedef enum |
| { |
| HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */ |
| HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */ |
| HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ |
| HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ |
| HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ |
| HAL_I2S_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ |
| HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ |
| HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ |
| |
| }HAL_I2S_StateTypeDef; |
| |
| /** |
| * @brief I2S handle Structure definition |
| */ |
| typedef struct __I2S_HandleTypeDef |
| { |
| SPI_TypeDef *Instance; /*!< I2S registers base address */ |
| |
| I2S_InitTypeDef Init; /*!< I2S communication parameters */ |
| |
| uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ |
| |
| __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ |
| |
| __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ |
| |
| uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ |
| |
| __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ |
| |
| __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter |
| (This field is initialized at the |
| same value as transfer size at the |
| beginning of the transfer and |
| decremented when a sample is received |
| NbSamplesReceived = RxBufferSize-RxBufferCount) */ |
| |
| void (*IrqHandlerISR) (struct __I2S_HandleTypeDef *hi2s); /*!< I2S function pointer on IrqHandler */ |
| |
| DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ |
| |
| DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ |
| |
| __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ |
| |
| __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ |
| |
| __IO uint32_t ErrorCode; /*!< I2S Error code |
| This parameter can be a value of @ref I2S_ErrorCode */ |
| |
| }I2S_HandleTypeDef; |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup I2S_Exported_Constants I2S Exported Constants |
| * @{ |
| */ |
| /** |
| * @defgroup I2S_ErrorCode I2S Error Code |
| * @{ |
| */ |
| #define HAL_I2S_ERROR_NONE 0x00000000U /*!< No error */ |
| #define HAL_I2S_ERROR_TIMEOUT 0x00000001U /*!< Timeout error */ |
| #define HAL_I2S_ERROR_OVR 0x00000002U /*!< OVR error */ |
| #define HAL_I2S_ERROR_UDR 0x00000004U /*!< UDR error */ |
| #define HAL_I2S_ERROR_DMA 0x00000008U /*!< DMA transfer error */ |
| #define HAL_I2S_ERROR_PRESCALER 0x00000010U /*!< Prescaler Calculation error */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_Mode I2S Mode |
| * @{ |
| */ |
| #define I2S_MODE_SLAVE_TX 0x00000000U |
| #define I2S_MODE_SLAVE_RX ((uint32_t)SPI_I2SCFGR_I2SCFG_0) |
| #define I2S_MODE_MASTER_TX ((uint32_t)SPI_I2SCFGR_I2SCFG_1) |
| #define I2S_MODE_MASTER_RX ((uint32_t)(SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_Standard I2S Standard |
| * @{ |
| */ |
| #define I2S_STANDARD_PHILIPS 0x00000000U |
| #define I2S_STANDARD_MSB ((uint32_t)SPI_I2SCFGR_I2SSTD_0) |
| #define I2S_STANDARD_LSB ((uint32_t)SPI_I2SCFGR_I2SSTD_1) |
| #define I2S_STANDARD_PCM_SHORT ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) |
| #define I2S_STANDARD_PCM_LONG ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_Data_Format I2S Data Format |
| * @{ |
| */ |
| #define I2S_DATAFORMAT_16B 0x00000000U |
| #define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)SPI_I2SCFGR_CHLEN) |
| #define I2S_DATAFORMAT_24B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) |
| #define I2S_DATAFORMAT_32B ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_MCLK_Output I2S Mclk Output |
| * @{ |
| */ |
| #define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE) |
| #define I2S_MCLKOUTPUT_DISABLE 0x00000000U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_Audio_Frequency I2S Audio Frequency |
| * @{ |
| */ |
| #define I2S_AUDIOFREQ_192K 192000U |
| #define I2S_AUDIOFREQ_96K 96000U |
| #define I2S_AUDIOFREQ_48K 48000U |
| #define I2S_AUDIOFREQ_44K 44100U |
| #define I2S_AUDIOFREQ_32K 32000U |
| #define I2S_AUDIOFREQ_22K 22050U |
| #define I2S_AUDIOFREQ_16K 16000U |
| #define I2S_AUDIOFREQ_11K 11025U |
| #define I2S_AUDIOFREQ_8K 8000U |
| #define I2S_AUDIOFREQ_DEFAULT 2U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_Clock_Polarity I2S Clock Polarity |
| * @{ |
| */ |
| #define I2S_CPOL_LOW 0x00000000U |
| #define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition |
| * @{ |
| */ |
| #define I2S_IT_TXE SPI_CR2_TXEIE |
| #define I2S_IT_RXNE SPI_CR2_RXNEIE |
| #define I2S_IT_ERR SPI_CR2_ERRIE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup I2S_Flags_Definition I2S Flags Definition |
| * @{ |
| */ |
| #define I2S_FLAG_TXE SPI_SR_TXE |
| #define I2S_FLAG_RXNE SPI_SR_RXNE |
| |
| #define I2S_FLAG_UDR SPI_SR_UDR |
| #define I2S_FLAG_OVR SPI_SR_OVR |
| #define I2S_FLAG_FRE SPI_SR_FRE |
| |
| #define I2S_FLAG_CHSIDE SPI_SR_CHSIDE |
| #define I2S_FLAG_BSY SPI_SR_BSY |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup I2S_Exported_Macros I2S Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset I2S handle state |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @retval None |
| */ |
| #define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) |
| |
| /** @brief Enable the specified SPI peripheral (in I2S mode). |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @retval None |
| */ |
| #define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) |
| |
| /** @brief Disable the specified SPI peripheral (in I2S mode). |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @retval None |
| */ |
| #define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) |
| |
| /** @brief Enable the specified I2S interrupts. |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @param __INTERRUPT__: specifies the interrupt source to enable or disable. |
| * This parameter can be one of the following values: |
| * @arg I2S_IT_TXE: Tx buffer empty interrupt enable |
| * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable |
| * @arg I2S_IT_ERR: Error interrupt enable |
| * @retval None |
| */ |
| #define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) |
| |
| /** @brief Disable the specified I2S interrupts. |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @param __INTERRUPT__: specifies the interrupt source to enable or disable. |
| * This parameter can be one of the following values: |
| * @arg I2S_IT_TXE: Tx buffer empty interrupt enable |
| * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable |
| * @arg I2S_IT_ERR: Error interrupt enable |
| * @retval None |
| */ |
| #define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) |
| |
| /** @brief Checks if the specified I2S interrupt source is enabled or disabled. |
| * @param __HANDLE__: specifies the I2S Handle. |
| * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. |
| * @param __INTERRUPT__: specifies the I2S interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg I2S_IT_TXE: Tx buffer empty interrupt enable |
| * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable |
| * @arg I2S_IT_ERR: Error interrupt enable |
| * @retval The new state of __IT__ (TRUE or FALSE). |
| */ |
| #define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) |
| |
| /** @brief Checks whether the specified I2S flag is set or not. |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @param __FLAG__: specifies the flag to check. |
| * This parameter can be one of the following values: |
| * @arg I2S_FLAG_RXNE: Receive buffer not empty flag |
| * @arg I2S_FLAG_TXE: Transmit buffer empty flag |
| * @arg I2S_FLAG_UDR: Underrun flag |
| * @arg I2S_FLAG_OVR: Overrun flag |
| * @arg I2S_FLAG_FRE: Frame error flag |
| * @arg I2S_FLAG_CHSIDE: Channel Side flag |
| * @arg I2S_FLAG_BSY: Busy flag |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) |
| |
| /** @brief Clears the I2S OVR pending flag. |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @retval None |
| */ |
| #define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) \ |
| do{ \ |
| __IO uint32_t tmpreg = 0x00U; \ |
| tmpreg = (__HANDLE__)->Instance->DR; \ |
| tmpreg = (__HANDLE__)->Instance->SR; \ |
| UNUSED(tmpreg); \ |
| } while(0U) |
| |
| /** @brief Clears the I2S UDR pending flag. |
| * @param __HANDLE__: specifies the I2S Handle. |
| * @retval None |
| */ |
| #define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) \ |
| do{ \ |
| __IO uint32_t tmpreg = 0x00U; \ |
| tmpreg = (__HANDLE__)->Instance->SR; \ |
| UNUSED(tmpreg); \ |
| } while(0U) |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup I2S_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup I2S_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Initialization/de-initialization functions ********************************/ |
| HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); |
| HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s); |
| void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); |
| void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup I2S_Exported_Functions_Group2 |
| * @{ |
| */ |
| /* I/O operation functions ***************************************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); |
| void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); |
| |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); |
| |
| HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); |
| HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); |
| HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); |
| |
| /* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ |
| void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); |
| void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); |
| void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); |
| void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); |
| void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup I2S_Exported_Functions_Group3 |
| * @{ |
| */ |
| /* Peripheral Control and State functions ************************************/ |
| HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); |
| uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup I2S_Private_Constants I2S Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup I2S_Private_Macros I2S Private Macros |
| * @{ |
| */ |
| #define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \ |
| ((MODE) == I2S_MODE_SLAVE_RX) || \ |
| ((MODE) == I2S_MODE_MASTER_TX) || \ |
| ((MODE) == I2S_MODE_MASTER_RX)) |
| |
| #define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \ |
| ((STANDARD) == I2S_STANDARD_MSB) || \ |
| ((STANDARD) == I2S_STANDARD_LSB) || \ |
| ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \ |
| ((STANDARD) == I2S_STANDARD_PCM_LONG)) |
| |
| #define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \ |
| ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \ |
| ((FORMAT) == I2S_DATAFORMAT_24B) || \ |
| ((FORMAT) == I2S_DATAFORMAT_32B)) |
| |
| #define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \ |
| ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE)) |
| |
| #define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \ |
| ((FREQ) <= I2S_AUDIOFREQ_192K)) || \ |
| ((FREQ) == I2S_AUDIOFREQ_DEFAULT)) |
| |
| #define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \ |
| ((CPOL) == I2S_CPOL_HIGH)) |
| /** |
| * @} |
| */ |
| |
| /* Private Fonctions ---------------------------------------------------------*/ |
| /** @defgroup I2S_Private_Functions I2S Private Functions |
| * @{ |
| */ |
| /* Private functions are defined in stm32f1xx_hal_i2s.c file */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| #endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F1xx_HAL_I2S_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |