| set(COMMON_ZEPHYR_LINKER_DIR ${ZEPHYR_BASE}/cmake/linker_script/common) | |
| set_ifndef(region_min_align CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE) | |
| # Set alignment to CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE if not set above | |
| # to make linker section alignment comply with MPU granularity. | |
| set_ifndef(region_min_align CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE) | |
| # If building without MPU support, use default 4-byte alignment.. if not set above. | |
| set_ifndef(region_min_align 4) | |
| # Note, the `+ 0` in formulas below avoids errors in cases where a Kconfig | |
| # variable is undefined and thus expands to nothing. | |
| math(EXPR FLASH_ADDR | |
| "${CONFIG_FLASH_BASE_ADDRESS} + ${CONFIG_FLASH_LOAD_OFFSET} + 0" | |
| OUTPUT_FORMAT HEXADECIMAL | |
| ) | |
| if(CONFIG_FLASH_LOAD_SIZE GREATER 0) | |
| math(EXPR FLASH_SIZE | |
| "(${CONFIG_FLASH_LOAD_SIZE} + 0) - (${CONFIG_ROM_END_OFFSET} + 0)" | |
| OUTPUT_FORMAT HEXADECIMAL | |
| ) | |
| else() | |
| math(EXPR FLASH_SIZE | |
| "(${CONFIG_FLASH_SIZE} + 0) * 1024 - (${CONFIG_FLASH_LOAD_OFFSET} + 0) - (${CONFIG_ROM_END_OFFSET} + 0)" | |
| OUTPUT_FORMAT HEXADECIMAL | |
| ) | |
| endif() | |
| set(RAM_ADDR ${CONFIG_SRAM_BASE_ADDRESS}) | |
| math(EXPR RAM_SIZE "(${CONFIG_SRAM_SIZE} + 0) * 1024" OUTPUT_FORMAT HEXADECIMAL) | |
| math(EXPR IDT_ADDR "${RAM_ADDR} + ${RAM_SIZE}" OUTPUT_FORMAT HEXADECIMAL) | |
| # ToDo: decide on the optimal location for this. | |
| # linker/ld/target.cmake based on arch, or directly in arch and scatter_script.cmake can ignore | |
| zephyr_linker(FORMAT "elf32-littlearm") | |
| zephyr_linker(ENTRY ${CONFIG_KERNEL_ENTRY}) | |
| zephyr_linker_memory(NAME FLASH FLAGS rx START ${FLASH_ADDR} SIZE ${FLASH_SIZE}) | |
| zephyr_linker_memory(NAME RAM FLAGS wx START ${RAM_ADDR} SIZE ${RAM_SIZE}) | |
| zephyr_linker_memory(NAME IDT_LIST FLAGS wx START ${IDT_ADDR} SIZE 2K) | |
| dt_comp_path(paths COMPATIBLE "zephyr,memory-region") | |
| foreach(path IN LISTS paths) | |
| zephyr_linker_dts_memory(PATH ${path}) | |
| endforeach() | |
| if(CONFIG_XIP) | |
| zephyr_linker_group(NAME ROM_REGION LMA FLASH) | |
| set(rom_start ${FLASH_ADDR}) | |
| set(XIP_ALIGN_WITH_INPUT ALIGN_WITH_INPUT) | |
| else() | |
| zephyr_linker_group(NAME ROM_REGION LMA RAM) | |
| set(rom_start ${RAM_ADDR}) | |
| endif() | |
| zephyr_linker_group(NAME RAM_REGION VMA RAM LMA ROM_REGION) | |
| zephyr_linker_group(NAME TEXT_REGION GROUP ROM_REGION SYMBOL SECTION) | |
| zephyr_linker_group(NAME RODATA_REGION GROUP ROM_REGION) | |
| zephyr_linker_group(NAME DATA_REGION GROUP RAM_REGION SYMBOL SECTION) | |
| # should go to a relocation.cmake - from include/linker/rel-sections.ld - start | |
| zephyr_linker_section(NAME .rel.plt HIDDEN) | |
| zephyr_linker_section(NAME .rela.plt HIDDEN) | |
| zephyr_linker_section(NAME .rel.dyn) | |
| zephyr_linker_section(NAME .rela.dyn) | |
| # should go to a relocation.cmake - from include/linker/rel-sections.ld - end | |
| # Discard sections for GNU ld. | |
| zephyr_linker_section_configure(SECTION /DISCARD/ INPUT ".plt") | |
| zephyr_linker_section_configure(SECTION /DISCARD/ INPUT ".iplt") | |
| zephyr_linker_section_configure(SECTION /DISCARD/ INPUT ".got.plt") | |
| zephyr_linker_section_configure(SECTION /DISCARD/ INPUT ".igot.plt") | |
| zephyr_linker_section_configure(SECTION /DISCARD/ INPUT ".got") | |
| zephyr_linker_section_configure(SECTION /DISCARD/ INPUT ".igot") | |
| zephyr_linker_section(NAME .rom_start ADDRESS ${rom_start} GROUP ROM_REGION NOINPUT) | |
| zephyr_linker_section(NAME .text GROUP TEXT_REGION) | |
| zephyr_linker_section_configure(SECTION .rel.plt INPUT ".rel.iplt") | |
| zephyr_linker_section_configure(SECTION .rela.plt INPUT ".rela.iplt") | |
| zephyr_linker_section_configure(SECTION .text INPUT ".TEXT.*") | |
| zephyr_linker_section_configure(SECTION .text INPUT ".gnu.linkonce.t.*") | |
| zephyr_linker_section_configure(SECTION .text INPUT ".glue_7t") | |
| zephyr_linker_section_configure(SECTION .text INPUT ".glue_7") | |
| zephyr_linker_section_configure(SECTION .text INPUT ".vfp11_veneer") | |
| zephyr_linker_section_configure(SECTION .text INPUT ".v4_bx") | |
| if(CONFIG_CPP) | |
| zephyr_linker_section(NAME .ARM.extab GROUP ROM_REGION) | |
| zephyr_linker_section_configure(SECTION .ARM.extab INPUT ".gnu.linkonce.armextab.*") | |
| endif() | |
| zephyr_linker_section(NAME .ARM.exidx GROUP ROM_REGION) | |
| # Here the original linker would check for __GCC_LINKER_CMD__, need to check toolchain linker ? | |
| #if(__GCC_LINKER_CMD__) | |
| zephyr_linker_section_configure(SECTION .ARM.exidx INPUT ".gnu.linkonce.armexidx.*") | |
| #endif() | |
| include(${COMMON_ZEPHYR_LINKER_DIR}/common-rom.cmake) | |
| include(${COMMON_ZEPHYR_LINKER_DIR}/thread-local-storage.cmake) | |
| zephyr_linker_section(NAME .rodata GROUP RODATA_REGION) | |
| zephyr_linker_section_configure(SECTION .rodata INPUT ".gnu.linkonce.r.*") | |
| if(CONFIG_USERSPACE AND CONFIG_XIP) | |
| zephyr_linker_section_configure(SECTION .rodata INPUT ".kobject_data.rodata*") | |
| endif() | |
| zephyr_linker_section_configure(SECTION .rodata ALIGN 4) | |
| # ToDo - . = ALIGN(_region_min_align); | |
| # Symbol to add _image_ram_start = .; | |
| # This comes from ramfunc.ls, via snippets-ram-sections.ld | |
| zephyr_linker_section(NAME .ramfunc GROUP RAM_REGION SUBALIGN 8) | |
| # Todo: handle MPU_ALIGN(_ramfunc_size); | |
| # ToDo - handle if(CONFIG_USERSPACE) | |
| zephyr_linker_section(NAME .data GROUP DATA_REGION) | |
| zephyr_linker_section_configure(SECTION .data INPUT ".kernel.*") | |
| include(${COMMON_ZEPHYR_LINKER_DIR}/common-ram.cmake) | |
| #include(kobject.ld) | |
| if(NOT CONFIG_USERSPACE) | |
| zephyr_linker_section(NAME .bss VMA RAM LMA FLASH TYPE BSS) | |
| zephyr_linker_section_configure(SECTION .bss INPUT COMMON) | |
| zephyr_linker_section_configure(SECTION .bss INPUT ".kernel_bss.*") | |
| # As memory is cleared in words only, it is simpler to ensure the BSS | |
| # section ends on a 4 byte boundary. This wastes a maximum of 3 bytes. | |
| zephyr_linker_section_configure(SECTION .bss ALIGN 4) | |
| zephyr_linker_section(NAME .noinit GROUP RAM_REGION TYPE NOLOAD NOINIT) | |
| # This section is used for non-initialized objects that | |
| # will not be cleared during the boot process. | |
| zephyr_linker_section_configure(SECTION .noinit INPUT ".kernel_noinit.*") | |
| endif() | |
| include(${COMMON_ZEPHYR_LINKER_DIR}/ram-end.cmake) | |
| zephyr_linker_symbol(SYMBOL __ramfunc_region_start EXPR "ADDR(.ramfunc)") | |
| zephyr_linker_symbol(SYMBOL __kernel_ram_start EXPR "(@__bss_start@)") | |
| zephyr_linker_symbol(SYMBOL __kernel_ram_end EXPR "(${RAM_ADDR} + ${RAM_SIZE})") | |
| zephyr_linker_symbol(SYMBOL __kernel_ram_size EXPR "(@__kernel_ram_end@ - @__bss_start@)") | |
| zephyr_linker_symbol(SYMBOL _image_ram_start EXPR "(${RAM_ADDR})" SUBALIGN 32) # ToDo calculate 32 correctly | |
| zephyr_linker_symbol(SYMBOL ARM_LIB_STACKHEAP EXPR "(${RAM_ADDR} + ${RAM_SIZE})" SIZE -0x1000) | |
| set(VECTOR_ALIGN 4) | |
| if(CONFIG_CPU_CORTEX_M_HAS_VTOR) | |
| math(EXPR VECTOR_ALIGN "4 * (16 + ${CONFIG_NUM_IRQS})") | |
| if(${VECTOR_ALIGN} LESS 128) | |
| set(VECTOR_ALIGN 128) | |
| else() | |
| pow2round(VECTOR_ALIGN) | |
| endif() | |
| endif() | |
| zephyr_linker_section_configure( | |
| SECTION .rom_start | |
| INPUT ".exc_vector_table*" | |
| ".gnu.linkonce.irq_vector_table*" | |
| ".vectors" | |
| OFFSET ${CONFIG_ROM_START_OFFSET} | |
| KEEP FIRST | |
| SYMBOLS _vector_start _vector_end | |
| ALIGN ${VECTOR_ALIGN} | |
| PRIO 50 | |
| ) | |
| dt_chosen(chosen_itcm PROPERTY "zephyr,itcm") | |
| if(DEFINED chosen_itcm) | |
| dt_node_has_status(status_result PATH ${chosen_itcm} STATUS okay) | |
| if(${status_result}) | |
| zephyr_linker_group(NAME ITCM_REGION VMA ITCM LMA ROM_REGION) | |
| zephyr_linker_section(NAME .itcm GROUP ITCM_REGION SUBALIGN 4) | |
| endif() | |
| endif() | |
| dt_chosen(chosen_dtcm PROPERTY "zephyr,dtcm") | |
| if(DEFINED chosen_dtcm) | |
| dt_node_has_status(status_result PATH ${chosen_dtcm} STATUS okay) | |
| if(${status_result}) | |
| zephyr_linker_group(NAME DTCM_REGION VMA DTCM LMA ROM_REGION) | |
| zephyr_linker_section(NAME .dtcm_bss GROUP DTCM_REGION SUBALIGN 4 TYPE BSS) | |
| zephyr_linker_section(NAME .dtcm_noinit GROUP DTCM_REGION SUBALIGN 4 TYPE NOLOAD NOINIT) | |
| zephyr_linker_section(NAME .dtcm_data GROUP DTCM_REGION SUBALIGN 4) | |
| endif() | |
| endif() | |
| zephyr_linker_section(NAME .ARM.attributes ADDRESS 0 NOINPUT) | |
| zephyr_linker_section_configure(SECTION .ARM.attributes INPUT ".ARM.attributes" KEEP) | |
| zephyr_linker_section_configure(SECTION .ARM.attributes INPUT ".gnu.attributes" KEEP) | |
| # armlink specific flags | |
| zephyr_linker_section_configure(SECTION .text ANY FLAGS "+RO" "+XO") | |
| zephyr_linker_section_configure(SECTION .data ANY FLAGS "+RW") | |
| zephyr_linker_section_configure(SECTION .bss ANY FLAGS "+ZI") | |
| include(${COMMON_ZEPHYR_LINKER_DIR}/debug-sections.cmake) | |
| dt_comp_path(paths COMPATIBLE "zephyr,memory-region") | |
| foreach(path IN LISTS paths) | |
| zephyr_linker_dts_section(PATH ${path}) | |
| endforeach() |