| /* |
| * Copyright (c) 2016 Wind River Systems, Inc. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * |
| * @brief Pipes |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/kernel_structs.h> |
| |
| #include <zephyr/toolchain.h> |
| #include <ksched.h> |
| #include <wait_q.h> |
| #include <zephyr/init.h> |
| #include <zephyr/internal/syscall_handler.h> |
| #include <kernel_internal.h> |
| #include <zephyr/sys/check.h> |
| |
| struct waitq_walk_data { |
| sys_dlist_t *list; |
| size_t bytes_requested; |
| size_t bytes_available; |
| }; |
| |
| static int pipe_get_internal(k_spinlock_key_t key, struct k_pipe *pipe, |
| void *data, size_t bytes_to_read, |
| size_t *bytes_read, size_t min_xfer, |
| k_timeout_t timeout); |
| #ifdef CONFIG_OBJ_CORE_PIPE |
| static struct k_obj_type obj_type_pipe; |
| #endif |
| |
| |
| void k_pipe_init(struct k_pipe *pipe, unsigned char *buffer, size_t size) |
| { |
| pipe->buffer = buffer; |
| pipe->size = size; |
| pipe->bytes_used = 0U; |
| pipe->read_index = 0U; |
| pipe->write_index = 0U; |
| pipe->lock = (struct k_spinlock){}; |
| z_waitq_init(&pipe->wait_q.writers); |
| z_waitq_init(&pipe->wait_q.readers); |
| SYS_PORT_TRACING_OBJ_INIT(k_pipe, pipe); |
| |
| pipe->flags = 0; |
| |
| #if defined(CONFIG_POLL) |
| sys_dlist_init(&pipe->poll_events); |
| #endif |
| k_object_init(pipe); |
| |
| #ifdef CONFIG_OBJ_CORE_PIPE |
| k_obj_core_init_and_link(K_OBJ_CORE(pipe), &obj_type_pipe); |
| #endif |
| } |
| |
| int z_impl_k_pipe_alloc_init(struct k_pipe *pipe, size_t size) |
| { |
| void *buffer; |
| int ret; |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_pipe, alloc_init, pipe); |
| |
| if (size != 0U) { |
| buffer = z_thread_malloc(size); |
| if (buffer != NULL) { |
| k_pipe_init(pipe, buffer, size); |
| pipe->flags = K_PIPE_FLAG_ALLOC; |
| ret = 0; |
| } else { |
| ret = -ENOMEM; |
| } |
| } else { |
| k_pipe_init(pipe, NULL, 0U); |
| ret = 0; |
| } |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, alloc_init, pipe, ret); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| static inline int z_vrfy_k_pipe_alloc_init(struct k_pipe *pipe, size_t size) |
| { |
| K_OOPS(K_SYSCALL_OBJ_NEVER_INIT(pipe, K_OBJ_PIPE)); |
| |
| return z_impl_k_pipe_alloc_init(pipe, size); |
| } |
| #include <syscalls/k_pipe_alloc_init_mrsh.c> |
| #endif |
| |
| static inline void handle_poll_events(struct k_pipe *pipe) |
| { |
| #ifdef CONFIG_POLL |
| z_handle_obj_poll_events(&pipe->poll_events, K_POLL_STATE_PIPE_DATA_AVAILABLE); |
| #else |
| ARG_UNUSED(pipe); |
| #endif |
| } |
| |
| void z_impl_k_pipe_flush(struct k_pipe *pipe) |
| { |
| size_t bytes_read; |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_pipe, flush, pipe); |
| |
| k_spinlock_key_t key = k_spin_lock(&pipe->lock); |
| |
| (void) pipe_get_internal(key, pipe, NULL, (size_t) -1, &bytes_read, 0U, |
| K_NO_WAIT); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, flush, pipe); |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| void z_vrfy_k_pipe_flush(struct k_pipe *pipe) |
| { |
| K_OOPS(K_SYSCALL_OBJ(pipe, K_OBJ_PIPE)); |
| |
| z_impl_k_pipe_flush(pipe); |
| } |
| #include <syscalls/k_pipe_flush_mrsh.c> |
| #endif |
| |
| void z_impl_k_pipe_buffer_flush(struct k_pipe *pipe) |
| { |
| size_t bytes_read; |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_pipe, buffer_flush, pipe); |
| |
| k_spinlock_key_t key = k_spin_lock(&pipe->lock); |
| |
| if (pipe->buffer != NULL) { |
| (void) pipe_get_internal(key, pipe, NULL, pipe->size, |
| &bytes_read, 0U, K_NO_WAIT); |
| } else { |
| k_spin_unlock(&pipe->lock, key); |
| } |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, buffer_flush, pipe); |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| void z_vrfy_k_pipe_buffer_flush(struct k_pipe *pipe) |
| { |
| K_OOPS(K_SYSCALL_OBJ(pipe, K_OBJ_PIPE)); |
| |
| z_impl_k_pipe_buffer_flush(pipe); |
| } |
| #endif |
| |
| int k_pipe_cleanup(struct k_pipe *pipe) |
| { |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_pipe, cleanup, pipe); |
| |
| k_spinlock_key_t key = k_spin_lock(&pipe->lock); |
| |
| CHECKIF(z_waitq_head(&pipe->wait_q.readers) != NULL || |
| z_waitq_head(&pipe->wait_q.writers) != NULL) { |
| k_spin_unlock(&pipe->lock, key); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, cleanup, pipe, -EAGAIN); |
| |
| return -EAGAIN; |
| } |
| |
| if ((pipe->flags & K_PIPE_FLAG_ALLOC) != 0U) { |
| k_free(pipe->buffer); |
| pipe->buffer = NULL; |
| |
| /* |
| * Freeing the buffer changes the pipe into a bufferless |
| * pipe. Reset the pipe's counters to prevent malfunction. |
| */ |
| |
| pipe->size = 0U; |
| pipe->bytes_used = 0U; |
| pipe->read_index = 0U; |
| pipe->write_index = 0U; |
| pipe->flags &= ~K_PIPE_FLAG_ALLOC; |
| } |
| |
| k_spin_unlock(&pipe->lock, key); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, cleanup, pipe, 0U); |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Copy bytes from @a src to @a dest |
| * |
| * @return Number of bytes copied |
| */ |
| static size_t pipe_xfer(unsigned char *dest, size_t dest_size, |
| const unsigned char *src, size_t src_size) |
| { |
| size_t num_bytes = MIN(dest_size, src_size); |
| |
| if (dest == NULL) { |
| /* Data is being flushed. Pretend the data was copied. */ |
| return num_bytes; |
| } |
| |
| (void) memcpy(dest, src, num_bytes); |
| |
| return num_bytes; |
| } |
| |
| /** |
| * @brief Callback routine used to populate wait list |
| * |
| * @return 1 to stop further walking; 0 to continue walking |
| */ |
| static int pipe_walk_op(struct k_thread *thread, void *data) |
| { |
| struct waitq_walk_data *walk_data = data; |
| struct _pipe_desc *desc = (struct _pipe_desc *)thread->base.swap_data; |
| |
| sys_dlist_append(walk_data->list, &desc->node); |
| |
| walk_data->bytes_available += desc->bytes_to_xfer; |
| |
| if (walk_data->bytes_available >= walk_data->bytes_requested) { |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Popluate pipe descriptors for copying to/from waiters' buffers |
| * |
| * This routine cycles through the waiters on the wait queue and creates |
| * a list of threads that will have data directly copied to / read from |
| * their buffers. This list helps us avoid double copying later. |
| * |
| * @return # of bytes available for direct copying |
| */ |
| static size_t pipe_waiter_list_populate(sys_dlist_t *list, |
| _wait_q_t *wait_q, |
| size_t bytes_to_xfer) |
| { |
| struct waitq_walk_data walk_data; |
| |
| walk_data.list = list; |
| walk_data.bytes_requested = bytes_to_xfer; |
| walk_data.bytes_available = 0; |
| |
| (void) z_sched_waitq_walk(wait_q, pipe_walk_op, &walk_data); |
| |
| return walk_data.bytes_available; |
| } |
| |
| /** |
| * @brief Populate pipe descriptors for copying to/from pipe buffer |
| * |
| * This routine is only called if the pipe buffer is not empty (when reading), |
| * or if not full (when writing). |
| */ |
| static size_t pipe_buffer_list_populate(sys_dlist_t *list, |
| struct _pipe_desc *desc, |
| unsigned char *buffer, |
| size_t size, |
| size_t start, |
| size_t end) |
| { |
| sys_dlist_append(list, &desc[0].node); |
| |
| desc[0].thread = NULL; |
| desc[0].buffer = &buffer[start]; |
| |
| if (start < end) { |
| desc[0].bytes_to_xfer = end - start; |
| return end - start; |
| } |
| |
| desc[0].bytes_to_xfer = size - start; |
| |
| desc[1].thread = NULL; |
| desc[1].buffer = &buffer[0]; |
| desc[1].bytes_to_xfer = end; |
| |
| sys_dlist_append(list, &desc[1].node); |
| |
| return size - start + end; |
| } |
| |
| /** |
| * @brief Determine the correct return code |
| * |
| * Bytes Xferred No Wait Wait |
| * >= Minimum 0 0 |
| * < Minimum -EIO* -EAGAIN |
| * |
| * * The "-EIO No Wait" case was already checked after the list of pipe |
| * descriptors was created. |
| * |
| * @return See table above |
| */ |
| static int pipe_return_code(size_t min_xfer, size_t bytes_remaining, |
| size_t bytes_requested) |
| { |
| if (bytes_requested - bytes_remaining >= min_xfer) { |
| /* |
| * At least the minimum number of requested |
| * bytes have been transferred. |
| */ |
| return 0; |
| } |
| |
| return -EAGAIN; |
| } |
| |
| /** |
| * @brief Copy data from source(s) to destination(s) |
| */ |
| |
| static size_t pipe_write(struct k_pipe *pipe, sys_dlist_t *src_list, |
| sys_dlist_t *dest_list, bool *reschedule) |
| { |
| struct _pipe_desc *src; |
| struct _pipe_desc *dest; |
| size_t bytes_copied; |
| size_t num_bytes_written = 0U; |
| |
| src = (struct _pipe_desc *)sys_dlist_get(src_list); |
| dest = (struct _pipe_desc *)sys_dlist_get(dest_list); |
| |
| while ((src != NULL) && (dest != NULL)) { |
| bytes_copied = pipe_xfer(dest->buffer, dest->bytes_to_xfer, |
| src->buffer, src->bytes_to_xfer); |
| |
| num_bytes_written += bytes_copied; |
| |
| dest->buffer += bytes_copied; |
| dest->bytes_to_xfer -= bytes_copied; |
| |
| src->buffer += bytes_copied; |
| src->bytes_to_xfer -= bytes_copied; |
| |
| if (dest->thread == NULL) { |
| |
| /* Writing to the pipe buffer. Update details. */ |
| |
| pipe->bytes_used += bytes_copied; |
| pipe->write_index += bytes_copied; |
| if (pipe->write_index >= pipe->size) { |
| pipe->write_index -= pipe->size; |
| } |
| } else if (dest->bytes_to_xfer == 0U) { |
| |
| /* The thread's read request has been satisfied. */ |
| |
| z_unpend_thread(dest->thread); |
| z_ready_thread(dest->thread); |
| |
| *reschedule = true; |
| } |
| |
| if (src->bytes_to_xfer == 0U) { |
| src = (struct _pipe_desc *)sys_dlist_get(src_list); |
| } |
| |
| if (dest->bytes_to_xfer == 0U) { |
| dest = (struct _pipe_desc *)sys_dlist_get(dest_list); |
| } |
| } |
| |
| return num_bytes_written; |
| } |
| |
| int z_impl_k_pipe_put(struct k_pipe *pipe, const void *data, |
| size_t bytes_to_write, size_t *bytes_written, |
| size_t min_xfer, k_timeout_t timeout) |
| { |
| struct _pipe_desc pipe_desc[2]; |
| struct _pipe_desc isr_desc; |
| struct _pipe_desc *src_desc; |
| sys_dlist_t dest_list; |
| sys_dlist_t src_list; |
| size_t bytes_can_write; |
| bool reschedule_needed = false; |
| |
| __ASSERT(((arch_is_in_isr() == false) || |
| K_TIMEOUT_EQ(timeout, K_NO_WAIT)), ""); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_pipe, put, pipe, timeout); |
| |
| CHECKIF((min_xfer > bytes_to_write) || bytes_written == NULL) { |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, put, pipe, timeout, |
| -EINVAL); |
| |
| return -EINVAL; |
| } |
| |
| sys_dlist_init(&src_list); |
| sys_dlist_init(&dest_list); |
| |
| k_spinlock_key_t key = k_spin_lock(&pipe->lock); |
| |
| /* |
| * First, write to any waiting readers, if any exist. |
| * Second, write to the pipe buffer, if it exists. |
| */ |
| |
| bytes_can_write = pipe_waiter_list_populate(&dest_list, |
| &pipe->wait_q.readers, |
| bytes_to_write); |
| |
| if (pipe->bytes_used != pipe->size) { |
| bytes_can_write += pipe_buffer_list_populate(&dest_list, |
| pipe_desc, |
| pipe->buffer, |
| pipe->size, |
| pipe->write_index, |
| pipe->read_index); |
| } |
| |
| if ((bytes_can_write < min_xfer) && |
| (K_TIMEOUT_EQ(timeout, K_NO_WAIT))) { |
| |
| /* The request can not be fulfilled. */ |
| |
| k_spin_unlock(&pipe->lock, key); |
| *bytes_written = 0U; |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, put, pipe, |
| timeout, -EIO); |
| |
| return -EIO; |
| } |
| |
| /* |
| * Do not use the pipe descriptor stored within k_thread if |
| * invoked from within an ISR as that is not safe to do. |
| */ |
| |
| src_desc = k_is_in_isr() ? &isr_desc : &_current->pipe_desc; |
| |
| src_desc->buffer = (unsigned char *)data; |
| src_desc->bytes_to_xfer = bytes_to_write; |
| src_desc->thread = _current; |
| sys_dlist_append(&src_list, &src_desc->node); |
| |
| *bytes_written = pipe_write(pipe, &src_list, |
| &dest_list, &reschedule_needed); |
| |
| /* |
| * Only handle poll events if the pipe has had some bytes written and |
| * there are bytes remaining after any pending readers have read from it |
| */ |
| |
| if ((pipe->bytes_used != 0U) && (*bytes_written != 0U)) { |
| handle_poll_events(pipe); |
| } |
| |
| /* |
| * The immediate success conditions below are backwards |
| * compatible with an earlier pipe implementation. |
| */ |
| |
| if ((*bytes_written == bytes_to_write) || |
| (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) || |
| ((*bytes_written >= min_xfer) && (min_xfer > 0U))) { |
| |
| /* The minimum amount of data has been copied */ |
| |
| if (reschedule_needed) { |
| z_reschedule(&pipe->lock, key); |
| } else { |
| k_spin_unlock(&pipe->lock, key); |
| } |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, put, pipe, timeout, 0); |
| |
| return 0; |
| } |
| |
| /* The minimum amount of data has not been copied. Block. */ |
| |
| SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_pipe, put, pipe, timeout); |
| |
| _current->base.swap_data = src_desc; |
| |
| z_sched_wait(&pipe->lock, key, &pipe->wait_q.writers, timeout, NULL); |
| |
| /* |
| * On SMP systems, threads in the processing list may timeout before |
| * the data has finished copying. The following spin lock/unlock pair |
| * prevents those threads from executing further until the data copying |
| * is complete. |
| */ |
| |
| key = k_spin_lock(&pipe->lock); |
| k_spin_unlock(&pipe->lock, key); |
| |
| *bytes_written = bytes_to_write - src_desc->bytes_to_xfer; |
| |
| int ret = pipe_return_code(min_xfer, src_desc->bytes_to_xfer, |
| bytes_to_write); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, put, pipe, timeout, ret); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| int z_vrfy_k_pipe_put(struct k_pipe *pipe, const void *data, |
| size_t bytes_to_write, size_t *bytes_written, |
| size_t min_xfer, k_timeout_t timeout) |
| { |
| K_OOPS(K_SYSCALL_OBJ(pipe, K_OBJ_PIPE)); |
| K_OOPS(K_SYSCALL_MEMORY_WRITE(bytes_written, sizeof(*bytes_written))); |
| K_OOPS(K_SYSCALL_MEMORY_READ((void *)data, bytes_to_write)); |
| |
| return z_impl_k_pipe_put((struct k_pipe *)pipe, data, |
| bytes_to_write, bytes_written, min_xfer, |
| timeout); |
| } |
| #include <syscalls/k_pipe_put_mrsh.c> |
| #endif |
| |
| static int pipe_get_internal(k_spinlock_key_t key, struct k_pipe *pipe, |
| void *data, size_t bytes_to_read, |
| size_t *bytes_read, size_t min_xfer, |
| k_timeout_t timeout) |
| { |
| sys_dlist_t src_list; |
| struct _pipe_desc pipe_desc[2]; |
| struct _pipe_desc isr_desc; |
| struct _pipe_desc *dest_desc; |
| struct _pipe_desc *src_desc; |
| size_t num_bytes_read = 0U; |
| size_t bytes_copied; |
| size_t bytes_can_read = 0U; |
| bool reschedule_needed = false; |
| |
| /* |
| * Data copying takes place in the following order. |
| * 1. Copy data from the pipe buffer to the receive buffer. |
| * 2. Copy data from the waiting writer(s) to the receive buffer. |
| * 3. Refill the pipe buffer from the waiting writer(s). |
| */ |
| |
| sys_dlist_init(&src_list); |
| |
| if (pipe->bytes_used != 0) { |
| bytes_can_read = pipe_buffer_list_populate(&src_list, |
| pipe_desc, |
| pipe->buffer, |
| pipe->size, |
| pipe->read_index, |
| pipe->write_index); |
| } |
| |
| bytes_can_read += pipe_waiter_list_populate(&src_list, |
| &pipe->wait_q.writers, |
| bytes_to_read); |
| |
| if ((bytes_can_read < min_xfer) && |
| (K_TIMEOUT_EQ(timeout, K_NO_WAIT))) { |
| |
| /* The request can not be fulfilled. */ |
| |
| k_spin_unlock(&pipe->lock, key); |
| *bytes_read = 0; |
| |
| return -EIO; |
| } |
| |
| /* |
| * Do not use the pipe descriptor stored within k_thread if |
| * invoked from within an ISR as that is not safe to do. |
| */ |
| |
| dest_desc = k_is_in_isr() ? &isr_desc : &_current->pipe_desc; |
| |
| dest_desc->buffer = data; |
| dest_desc->bytes_to_xfer = bytes_to_read; |
| dest_desc->thread = _current; |
| |
| src_desc = (struct _pipe_desc *)sys_dlist_get(&src_list); |
| while (src_desc != NULL) { |
| bytes_copied = pipe_xfer(dest_desc->buffer, |
| dest_desc->bytes_to_xfer, |
| src_desc->buffer, |
| src_desc->bytes_to_xfer); |
| |
| num_bytes_read += bytes_copied; |
| |
| src_desc->buffer += bytes_copied; |
| src_desc->bytes_to_xfer -= bytes_copied; |
| |
| if (dest_desc->buffer != NULL) { |
| dest_desc->buffer += bytes_copied; |
| } |
| dest_desc->bytes_to_xfer -= bytes_copied; |
| |
| if (src_desc->thread == NULL) { |
| |
| /* Reading from the pipe buffer. Update details. */ |
| |
| pipe->bytes_used -= bytes_copied; |
| pipe->read_index += bytes_copied; |
| if (pipe->read_index >= pipe->size) { |
| pipe->read_index -= pipe->size; |
| } |
| } else if (src_desc->bytes_to_xfer == 0U) { |
| |
| /* The thread's write request has been satisfied. */ |
| |
| z_unpend_thread(src_desc->thread); |
| z_ready_thread(src_desc->thread); |
| |
| reschedule_needed = true; |
| } |
| src_desc = (struct _pipe_desc *)sys_dlist_get(&src_list); |
| } |
| |
| if (pipe->bytes_used != pipe->size) { |
| sys_dlist_t pipe_list; |
| |
| /* |
| * The pipe is not full. If there are any waiting writers, |
| * refill the pipe. |
| */ |
| |
| sys_dlist_init(&src_list); |
| sys_dlist_init(&pipe_list); |
| |
| (void) pipe_waiter_list_populate(&src_list, |
| &pipe->wait_q.writers, |
| pipe->size - pipe->bytes_used); |
| |
| (void) pipe_buffer_list_populate(&pipe_list, pipe_desc, |
| pipe->buffer, pipe->size, |
| pipe->write_index, |
| pipe->read_index); |
| |
| (void) pipe_write(pipe, &src_list, |
| &pipe_list, &reschedule_needed); |
| } |
| |
| /* |
| * The immediate success conditions below are backwards |
| * compatible with an earlier pipe implementation. |
| */ |
| |
| if ((num_bytes_read == bytes_to_read) || |
| (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) || |
| ((num_bytes_read >= min_xfer) && (min_xfer > 0U))) { |
| |
| /* The minimum amount of data has been copied */ |
| |
| *bytes_read = num_bytes_read; |
| if (reschedule_needed) { |
| z_reschedule(&pipe->lock, key); |
| } else { |
| k_spin_unlock(&pipe->lock, key); |
| } |
| |
| return 0; |
| } |
| |
| /* The minimum amount of data has not been copied. Block. */ |
| |
| SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_pipe, get, pipe, timeout); |
| |
| _current->base.swap_data = dest_desc; |
| |
| z_sched_wait(&pipe->lock, key, &pipe->wait_q.readers, timeout, NULL); |
| |
| /* |
| * On SMP systems, threads in the processing list may timeout before |
| * the data has finished copying. The following spin lock/unlock pair |
| * prevents those threads from executing further until the data copying |
| * is complete. |
| */ |
| |
| key = k_spin_lock(&pipe->lock); |
| k_spin_unlock(&pipe->lock, key); |
| |
| *bytes_read = bytes_to_read - dest_desc->bytes_to_xfer; |
| |
| int ret = pipe_return_code(min_xfer, dest_desc->bytes_to_xfer, |
| bytes_to_read); |
| |
| return ret; |
| } |
| |
| int z_impl_k_pipe_get(struct k_pipe *pipe, void *data, size_t bytes_to_read, |
| size_t *bytes_read, size_t min_xfer, k_timeout_t timeout) |
| { |
| __ASSERT(((arch_is_in_isr() == false) || |
| K_TIMEOUT_EQ(timeout, K_NO_WAIT)), ""); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_pipe, get, pipe, timeout); |
| |
| CHECKIF((min_xfer > bytes_to_read) || bytes_read == NULL) { |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, get, pipe, |
| timeout, -EINVAL); |
| |
| return -EINVAL; |
| } |
| |
| k_spinlock_key_t key = k_spin_lock(&pipe->lock); |
| |
| int ret = pipe_get_internal(key, pipe, data, bytes_to_read, bytes_read, |
| min_xfer, timeout); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_pipe, get, pipe, timeout, ret); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| int z_vrfy_k_pipe_get(struct k_pipe *pipe, void *data, size_t bytes_to_read, |
| size_t *bytes_read, size_t min_xfer, k_timeout_t timeout) |
| { |
| K_OOPS(K_SYSCALL_OBJ(pipe, K_OBJ_PIPE)); |
| K_OOPS(K_SYSCALL_MEMORY_WRITE(bytes_read, sizeof(*bytes_read))); |
| K_OOPS(K_SYSCALL_MEMORY_WRITE((void *)data, bytes_to_read)); |
| |
| return z_impl_k_pipe_get((struct k_pipe *)pipe, (void *)data, |
| bytes_to_read, bytes_read, min_xfer, |
| timeout); |
| } |
| #include <syscalls/k_pipe_get_mrsh.c> |
| #endif |
| |
| size_t z_impl_k_pipe_read_avail(struct k_pipe *pipe) |
| { |
| size_t res; |
| k_spinlock_key_t key; |
| |
| /* Buffer and size are fixed. No need to spin. */ |
| if (pipe->buffer == NULL || pipe->size == 0U) { |
| res = 0; |
| goto out; |
| } |
| |
| key = k_spin_lock(&pipe->lock); |
| |
| if (pipe->read_index == pipe->write_index) { |
| res = pipe->bytes_used; |
| } else if (pipe->read_index < pipe->write_index) { |
| res = pipe->write_index - pipe->read_index; |
| } else { |
| res = pipe->size - (pipe->read_index - pipe->write_index); |
| } |
| |
| k_spin_unlock(&pipe->lock, key); |
| |
| out: |
| return res; |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| size_t z_vrfy_k_pipe_read_avail(struct k_pipe *pipe) |
| { |
| K_OOPS(K_SYSCALL_OBJ(pipe, K_OBJ_PIPE)); |
| |
| return z_impl_k_pipe_read_avail(pipe); |
| } |
| #include <syscalls/k_pipe_read_avail_mrsh.c> |
| #endif |
| |
| size_t z_impl_k_pipe_write_avail(struct k_pipe *pipe) |
| { |
| size_t res; |
| k_spinlock_key_t key; |
| |
| /* Buffer and size are fixed. No need to spin. */ |
| if (pipe->buffer == NULL || pipe->size == 0U) { |
| res = 0; |
| goto out; |
| } |
| |
| key = k_spin_lock(&pipe->lock); |
| |
| if (pipe->write_index == pipe->read_index) { |
| res = pipe->size - pipe->bytes_used; |
| } else if (pipe->write_index < pipe->read_index) { |
| res = pipe->read_index - pipe->write_index; |
| } else { |
| res = pipe->size - (pipe->write_index - pipe->read_index); |
| } |
| |
| k_spin_unlock(&pipe->lock, key); |
| |
| out: |
| return res; |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| size_t z_vrfy_k_pipe_write_avail(struct k_pipe *pipe) |
| { |
| K_OOPS(K_SYSCALL_OBJ(pipe, K_OBJ_PIPE)); |
| |
| return z_impl_k_pipe_write_avail(pipe); |
| } |
| #include <syscalls/k_pipe_write_avail_mrsh.c> |
| #endif |
| |
| #ifdef CONFIG_OBJ_CORE_PIPE |
| static int init_pipe_obj_core_list(void) |
| { |
| /* Initialize pipe object type */ |
| |
| z_obj_type_init(&obj_type_pipe, K_OBJ_TYPE_PIPE_ID, |
| offsetof(struct k_pipe, obj_core)); |
| |
| /* Initialize and link statically defined pipes */ |
| |
| STRUCT_SECTION_FOREACH(k_pipe, pipe) { |
| k_obj_core_init_and_link(K_OBJ_CORE(pipe), &obj_type_pipe); |
| } |
| |
| return 0; |
| } |
| |
| SYS_INIT(init_pipe_obj_core_list, PRE_KERNEL_1, |
| CONFIG_KERNEL_INIT_PRIORITY_OBJECTS); |
| #endif |