blob: 23b3dcbd018a861df7f9cd85062533d4d873cebc [file] [log] [blame]
/*
* Copyright (c) 2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef _SEGMENTATION_H
#define _SEGMENTATION_H
#include <zephyr/types.h>
/* Host gen_idt uses this header as well, don't depend on toolchain.h */
#ifndef __packed
#define __packed __attribute__((packed))
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*
* Bitmask used to determine which exceptions result in an error code being
* pushed onto the stack. The following exception vectors push an error code:
*
* Vector Mnemonic Description
* ------ ------- ----------------------
* 8 #DF Double Fault
* 10 #TS Invalid TSS
* 11 #NP Segment Not Present
* 12 #SS Stack Segment Fault
* 13 #GP General Protection Fault
* 14 #PF Page Fault
* 17 #AC Alignment Check
*/
#define _EXC_ERROR_CODE_FAULTS 0x27d00
/* NOTE: We currently do not have definitions for 16-bit segment, currently
* assume everything we are working with is 32-bit
*/
#define SEG_TYPE_LDT 0x2
#define SEG_TYPE_TASK_GATE 0x5
#define SEG_TYPE_TSS 0x9
#define SEG_TYPE_TSS_BUSY 0xB
#define SEG_TYPE_CALL_GATE 0xC
#define SEG_TYPE_IRQ_GATE 0xE
#define SEG_TYPE_TRAP_GATE 0xF
#define DT_GRAN_BYTE 0
#define DT_GRAN_PAGE 1
#define DT_READABLE 1
#define DT_NON_READABLE 0
#define DT_WRITABLE 1
#define DT_NON_WRITABLE 0
#define DT_EXPAND_DOWN 1
#define DT_EXPAND_UP 0
#define DT_CONFORM 1
#define DT_NONCONFORM 0
#define DT_TYPE_SYSTEM 0
#define DT_TYPE_CODEDATA 1
#ifndef _ASMLANGUAGE
/* Section 7.2.1 of IA architecture SW developer manual, Vol 3. */
struct __packed task_state_segment {
u16_t backlink;
u16_t reserved_1;
u32_t esp0;
u16_t ss0;
u16_t reserved_2;
u32_t esp1;
u16_t ss1;
u16_t reserved_3;
u32_t esp2;
u16_t ss2;
u16_t reserved_4;
u32_t cr3;
u32_t eip;
u32_t eflags;
u32_t eax;
u32_t ecx;
u32_t edx;
u32_t ebx;
u32_t esp;
u32_t ebp;
u32_t esi;
u32_t edi;
u16_t es;
u16_t reserved_5;
u16_t cs;
u16_t reserved_6;
u16_t ss;
u16_t reserved_7;
u16_t ds;
u16_t reserved_8;
u16_t fs;
u16_t reserved_9;
u16_t gs;
u16_t reserved_10;
u16_t ldt_ss;
u16_t reserved_11;
u8_t t:1; /* Trap bit */
u16_t reserved_12:15;
u16_t iomap;
};
/* Section 3.4.2 of IA architecture SW developer manual, Vol 3. */
struct __packed segment_selector {
union {
struct {
u8_t rpl:2;
u8_t table:1; /* 0=gdt 1=ldt */
u16_t index:13;
};
u16_t val;
};
};
#define SEG_SELECTOR(index, table, dpl) (index << 3 | table << 2 | dpl)
/* References
*
* Section 5.8.3 (Call gates)
* Section 7.2.2 (TSS Descriptor)
* Section 3.4.5 (Segment descriptors)
* Section 6.11 (IDT Descriptors)
*
* IA architecture SW developer manual, Vol 3.
*/
struct __packed segment_descriptor {
/* First DWORD: 0-15 */
union {
/* IRQ, call, trap gates */
u16_t limit_low;
/* Task gates */
u16_t reserved_task_gate_0;
/* Everything else */
u16_t offset_low;
};
/* First DWORD: 16-31 */
union {
/* Call/Task/Interrupt/Trap gates */
u16_t segment_selector;
/* TSS/LDT/Segments */
u16_t base_low; /* Bits 0-15 */
};
/* Second DWORD: 0-7 */
union {
/* TSS/LDT/Segments */
u8_t base_mid; /* Bits 16-23 */
/* Task gates */
u8_t reserved_task_gate_1;
/* IRQ/Trap/Call Gates */
struct {
/* Reserved except in case of call gates */
u8_t reserved_or_param:5;
/* Bits 5-7 0 0 0 per CPU manual */
u8_t always_0_0:3;
};
};
/* Second DWORD: 8-15 */
union {
/* Code or data Segments */
struct {
/* Set by the processor, init to 0 */
u8_t accessed:1;
/* executable ? readable : writable */
u8_t rw:1;
/* executable ? conforming : direction */
u8_t cd:1;
/* 1=code 0=data */
u8_t executable:1;
/* Next 3 fields actually common to all */
/* 1=code or data, 0=system type */
u8_t descriptor_type:1;
u8_t dpl:2;
u8_t present:1;
};
/* System types */
struct {
/* One of the SEG_TYPE_* macros above */
u8_t type:4;
/* Alas, C doesn't let you do a union of the first
* 4 bits of a bitfield and put the rest outside of it,
* it ends up getting padded.
*/
u8_t use_other_union:4;
};
};
/* Second DWORD: 16-31 */
union {
/* Call/IRQ/trap gates */
u16_t offset_hi;
/* Task Gates */
u16_t reserved_task_gate_2;
/* segment/LDT/TSS */
struct {
u8_t limit_hi:4;
/* flags */
u8_t avl:1; /* CPU ignores this */
/* 1=Indicates 64-bit code segment in IA-32e mode */
u8_t flags_l:1; /* L field */
u8_t db:1; /* D/B field 1=32-bit 0=16-bit*/
u8_t granularity:1;
u8_t base_hi; /* Bits 24-31 */
};
};
};
/* Address of this passed to lidt/lgdt.
* IA manual calls this a 'pseudo descriptor'.
*/
struct __packed pseudo_descriptor {
u16_t size;
struct segment_descriptor *entries;
};
/*
* Full linear address (segment selector+offset), for far jumps/calls
*/
struct __packed far_ptr {
/** Far pointer offset, unused when invoking a task. */
void *offset;
/** Far pointer segment/gate selector. */
u16_t sel;
};
#define DT_ZERO_ENTRY { { 0 } }
/* NOTE: the below macros only work for fixed addresses provided at build time.
* Base addresses or offsets cannot be &some_variable, as pointer values are not
* known until link time and the compiler has to split the address into various
* fields in the segment selector well before that.
*
* If you really need to put &some_variable as the base address in some
* segment descriptor, you will either need to do the assignment at runtime
* or implement some tool to populate values post-link like gen_idt does.
*/
#define _LIMIT_AND_BASE(base_p, limit_p, granularity_p) \
.base_low = (((u32_t)base_p) & 0xFFFF), \
.base_mid = (((base_p) >> 16) & 0xFF), \
.base_hi = (((base_p) >> 24) & 0xFF), \
.limit_low = ((limit_p) & 0xFFFF), \
.limit_hi = (((limit_p) >> 16) & 0xF), \
.granularity = (granularity_p), \
.flags_l = 0, \
.db = 1, \
.avl = 0
#define _SEGMENT_AND_OFFSET(segment_p, offset_p) \
.segment_selector = (segment_p), \
.offset_low = ((offset_p) & 0xFFFF), \
.offset_hi = ((offset_p) >> 16)
#define _DESC_COMMON(dpl_p) \
.dpl = (dpl_p), \
.present = 1
#define _SYS_DESC(type_p) \
.type = type_p, \
.descriptor_type = 0
#define DT_CODE_SEG_ENTRY(base_p, limit_p, granularity_p, dpl_p, readable_p, \
conforming_p) \
{ \
_DESC_COMMON(dpl_p), \
_LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
.accessed = 0, \
.rw = (readable_p), \
.cd = (conforming_p), \
.executable = 1, \
.descriptor_type = 1 \
}
#define DT_DATA_SEG_ENTRY(base_p, limit_p, granularity_p, dpl_p, writable_p, \
direction_p) \
{ \
_DESC_COMMON(dpl_p), \
_LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
.accessed = 0, \
.rw = (writable_p), \
.cd = (direction_p), \
.executable = 0, \
.descriptor_type = 1 \
}
#define DT_LDT_ENTRY(base_p, limit_p, granularity_p, dpl_p) \
{ \
_DESC_COMMON(dpl_p), \
_LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
_SYS_DESC(SEG_TYPE_LDT) \
}
#define DT_TSS_ENTRY(base_p, limit_p, granularity_p, dpl_p) \
{ \
_DESC_COMMON(dpl_p), \
_LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
_SYS_DESC(SEG_TYPE_TSS) \
}
/* "standard" TSS segments that don't stuff extra data past the end of the
* TSS struct
*/
#define DT_TSS_STD_ENTRY(base_p, dpl_p) \
DT_TSS_ENTRY(base_p, sizeof(struct task_state_segment), DT_GRAN_BYTE, \
dpl_p)
#define DT_TASK_GATE_ENTRY(segment_p, dpl_p) \
{ \
_DESC_COMMON(dpl_p), \
_SYS_DESC(SEG_TYPE_TASK_GATE), \
.segment_selector = (segment_p) \
}
#define DT_IRQ_GATE_ENTRY(segment_p, offset_p, dpl_p) \
{ \
_DESC_COMMON(dpl_p), \
_SEGMENT_AND_OFFSET(segment_p, offset_p), \
_SYS_DESC(SEG_TYPE_IRQ_GATE), \
.always_0_0 = 0 \
}
#define DT_TRAP_GATE_ENTRY(segment_p, offset_p, dpl_p) \
{ \
_DESC_COMMON(dpl_p), \
_SEGMENT_AND_OFFSET(segment_p, offset_p), \
_SYS_DESC(SEG_TYPE_TRAP_GATE), \
.always_0_0 = 0 \
}
#define DT_CALL_GATE_ENTRY(segment_p, offset_p, dpl_p, param_count_p) \
{ \
_DESC_COMMON(dpl_p), \
_SEGMENT_AND_OFFSET(segment_p, offset_p), \
_SYS_DESC(SEG_TYPE_TRAP_GATE), \
.reserved_or_param = (param_count_p), \
.always_0_0 = 0 \
}
#define DTE_BASE(dt_entry) ((dt_entry)->base_low | \
((dt_entry)->base_mid << 16) | \
((dt_entry)->base_hi << 24))
#define DTE_LIMIT(dt_entry) ((dt_entry)->limit_low | \
((dt_entry)->limit_hi << 16))
#define DTE_OFFSET(dt_entry) ((dt_entry)->offset_low | \
((dt_entry)->offset_hi << 16))
#define DT_INIT(entries) { sizeof(entries) - 1, &entries[0] }
#ifdef CONFIG_SET_GDT
/* This is either the ROM-based GDT in crt0.S or generated by gen_gdt.py,
* depending on CONFIG_GDT_DYNAMIC
*/
extern struct pseudo_descriptor _gdt;
#endif
/**
* Properly set the segment descriptor segment and offset
*
* Used for call/interrupt/trap gates
*
* @param sd Segment descriptor
* @param offset Offset within segment
* @param segment_selector Segment selector
*/
static inline void _sd_set_seg_offset(struct segment_descriptor *sd,
u16_t segment_selector,
u32_t offset)
{
sd->offset_low = offset & 0xFFFF;
sd->offset_hi = offset >> 16;
sd->segment_selector = segment_selector;
sd->always_0_0 = 0;
}
/**
* Initialize an segment descriptor to be a 32-bit IRQ gate
*
* @param sd Segment descriptor memory
* @param seg_selector Segment selector of handler
* @param offset offset of handler
* @param dpl descriptor privilege level
*/
static inline void _init_irq_gate(struct segment_descriptor *sd,
u16_t seg_selector, u32_t offset,
u32_t dpl)
{
_sd_set_seg_offset(sd, seg_selector, offset);
sd->dpl = dpl;
sd->descriptor_type = DT_TYPE_SYSTEM;
sd->present = 1;
sd->type = SEG_TYPE_IRQ_GATE;
}
/**
* Set current IA task TSS
*
* @param sel Segment selector in GDT for desired TSS
*/
static inline void _set_tss(u16_t sel)
{
__asm__ __volatile__ ("ltr %0" :: "r" (sel));
}
/**
* Get the TSS segment selector in the GDT for the current IA task
*
* @return Segment selector for current IA task
*/
static inline u16_t _get_tss(void)
{
u16_t sel;
__asm__ __volatile__ ("str %0" : "=r" (sel));
return sel;
}
/**
* Get the current global descriptor table
*
* @param gdt Pointer to memory to receive GDT pseudo descriptor information
*/
static inline void _get_gdt(struct pseudo_descriptor *gdt)
{
__asm__ __volatile__ ("sgdt %0" : "=m" (*gdt));
}
/**
* Get the current interrupt descriptor table
*
* @param idt Pointer to memory to receive IDT pseudo descriptor information
*/
static inline void _get_idt(struct pseudo_descriptor *idt)
{
__asm__ __volatile__ ("sidt %0" : "=m" (*idt));
}
/**
* Get the current local descriptor table (LDT)
*
* @return Segment selector in the GDT for the current LDT
*/
static inline u16_t _get_ldt(void)
{
u16_t ret;
__asm__ __volatile__ ("sldt %0" : "=m" (ret));
return ret;
}
/**
* Set the local descriptor table for the current IA Task
*
* @param ldt Segment selector in the GDT for an LDT
*/
static inline void _set_ldt(u16_t ldt)
{
__asm__ __volatile__ ("lldt %0" :: "m" (ldt));
}
/**
* Set the global descriptor table
*
* You will most likely need to update all the data segment registers
* and do a far call to the code segment.
*
* @param gdt Pointer to GDT pseudo descriptor.
*/
static inline void _set_gdt(const struct pseudo_descriptor *gdt)
{
__asm__ __volatile__ ("lgdt %0" :: "m" (*gdt));
}
/**
* Set the interrupt descriptor table
*
* @param idt Pointer to IDT pseudo descriptor.
*/
static inline void _set_idt(const struct pseudo_descriptor *idt)
{
__asm__ __volatile__ ("lidt %0" :: "m" (*idt));
}
/**
* Get the segment selector for the current code segment
*
* @return Segment selector
*/
static inline u16_t _get_cs(void)
{
u16_t cs = 0;
__asm__ __volatile__ ("mov %%cs, %0" : "=r" (cs));
return cs;
}
/**
* Get the segment selector for the current data segment
*
* @return Segment selector
*/
static inline u16_t _get_ds(void)
{
u16_t ds = 0;
__asm__ __volatile__ ("mov %%ds, %0" : "=r" (ds));
return ds;
}
#endif /* _ASMLANGUAGE */
#ifdef __cplusplus
}
#endif
#endif /* _SEGMENTATION_H */