/** | |
****************************************************************************** | |
* @file stm32f2xx.h | |
* @author MCD Application Team | |
* @brief CMSIS STM32F2xx Device Peripheral Access Layer Header File. | |
* | |
* The file is the unique include file that the application programmer | |
* is using in the C source code, usually in main.c. This file contains: | |
* - Configuration section that allows to select: | |
* - The STM32F2xx device used in the target application | |
* - To use or not the peripheralÂ’s drivers in application code(i.e. | |
* code will be based on direct access to peripheralÂ’s registers | |
* rather than drivers API), this option is controlled by | |
* "#define USE_HAL_DRIVER" | |
* | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/** @addtogroup CMSIS | |
* @{ | |
*/ | |
/** @addtogroup stm32f2xx | |
* @{ | |
*/ | |
#ifndef __STM32F2xx_H | |
#define __STM32F2xx_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif /* __cplusplus */ | |
/** @addtogroup Library_configuration_section | |
* @{ | |
*/ | |
/** | |
* @brief STM32 Family | |
*/ | |
#if !defined (STM32F2) | |
#define STM32F2 | |
#endif /* STM32F2 */ | |
/* Uncomment the line below according to the target STM32 device used in your | |
application | |
*/ | |
#if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx) | |
/* #define STM32F205xx */ /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF, | |
STM32F205RE, STM32F205VE, STM32F205ZE, STM32F205RC, STM32F205VC, STM32F205ZC, | |
STM32F205RB and STM32F205VB Devices */ | |
/* #define STM32F215xx */ /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */ | |
/* #define STM32F207xx */ /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF, | |
STM32F207VE, STM32F207ZE, STM32F207IE, STM32F207VC, STM32F207ZC and STM32F207IC Devices */ | |
/* #define STM32F217xx */ /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */ | |
#endif | |
/* Tip: To avoid modifying this file each time you need to switch between these | |
devices, you can define the device in your toolchain compiler preprocessor. | |
*/ | |
#if !defined (USE_HAL_DRIVER) | |
/** | |
* @brief Comment the line below if you will not use the peripherals drivers. | |
In this case, these drivers will not be included and the application code will | |
be based on direct access to peripherals registers | |
*/ | |
/*#define USE_HAL_DRIVER */ | |
#endif /* USE_HAL_DRIVER */ | |
/** | |
* @brief CMSIS Device version number V2.2.1 | |
*/ | |
#define __STM32F2xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */ | |
#define __STM32F2xx_CMSIS_VERSION_SUB1 (0x02U) /*!< [23:16] sub1 version */ | |
#define __STM32F2xx_CMSIS_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */ | |
#define __STM32F2xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */ | |
#define __STM32F2xx_CMSIS_VERSION ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\ | |
|(__STM32F2xx_CMSIS_VERSION_SUB1 << 16)\ | |
|(__STM32F2xx_CMSIS_VERSION_SUB2 << 8 )\ | |
|(__STM32F2xx_CMSIS_VERSION)) | |
/** | |
* @} | |
*/ | |
/** @addtogroup Device_Included | |
* @{ | |
*/ | |
#if defined(STM32F205xx) | |
#include "stm32f205xx.h" | |
#elif defined(STM32F215xx) | |
#include "stm32f215xx.h" | |
#elif defined(STM32F207xx) | |
#include "stm32f207xx.h" | |
#elif defined(STM32F217xx) | |
#include "stm32f217xx.h" | |
#else | |
#error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)" | |
#endif | |
/** | |
* @} | |
*/ | |
/** @addtogroup Exported_types | |
* @{ | |
*/ | |
typedef enum | |
{ | |
RESET = 0, | |
SET = !RESET | |
} FlagStatus, ITStatus; | |
typedef enum | |
{ | |
DISABLE = 0, | |
ENABLE = !DISABLE | |
} FunctionalState; | |
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) | |
typedef enum | |
{ | |
ERROR = 0, | |
SUCCESS = !ERROR | |
} ErrorStatus; | |
/** | |
* @} | |
*/ | |
/** @addtogroup Exported_macro | |
* @{ | |
*/ | |
#define SET_BIT(REG, BIT) ((REG) |= (BIT)) | |
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) | |
#define READ_BIT(REG, BIT) ((REG) & (BIT)) | |
#define CLEAR_REG(REG) ((REG) = (0x0)) | |
#define WRITE_REG(REG, VAL) ((REG) = (VAL)) | |
#define READ_REG(REG) ((REG)) | |
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) | |
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) | |
/** | |
* @} | |
*/ | |
#if defined (USE_HAL_DRIVER) | |
#include "stm32f2xx_hal.h" | |
#endif /* USE_HAL_DRIVER */ | |
#ifdef __cplusplus | |
} | |
#endif /* __cplusplus */ | |
#endif /* __STM32F2xx_H */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |