| /* |
| * Copyright (c) 2020 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <nordic/nrf5340_cpunet_qkaa.dtsi> |
| #include "nrf5340dk_nrf5340_cpunet-pinctrl.dtsi" |
| |
| / { |
| model = "Nordic NRF5340 DK NRF5340 Network"; |
| compatible = "nordic,nrf5340-dk-nrf5340-cpunet"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| zephyr,bt-mon-uart = &uart0; |
| zephyr,bt-c2h-uart = &uart0; |
| zephyr,bt-hci-rpmsg-ipc = &ipc0; |
| zephyr,sram = &sram1; |
| zephyr,flash = &flash1; |
| zephyr,code-partition = &slot0_partition; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led0: led_0 { |
| gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; |
| label = "Green LED 0"; |
| }; |
| led1: led_1 { |
| gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; |
| label = "Green LED 1"; |
| }; |
| led2: led_2 { |
| gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; |
| label = "Green LED 2"; |
| }; |
| led3: led_3 { |
| gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; |
| label = "Green LED 3"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| gpios = <&gpio0 23 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 1"; |
| }; |
| button1: button_1 { |
| gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 2"; |
| }; |
| button2: button_2 { |
| gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 3"; |
| }; |
| button3: button_3 { |
| gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button 4"; |
| }; |
| }; |
| |
| arduino_header: connector { |
| compatible = "arduino-header-r3"; |
| #gpio-cells = <2>; |
| gpio-map-mask = <0xffffffff 0xffffffc0>; |
| gpio-map-pass-thru = <0 0x3f>; |
| gpio-map = <0 0 &gpio0 4 0>, /* A0 */ |
| <1 0 &gpio0 5 0>, /* A1 */ |
| <2 0 &gpio0 6 0>, /* A2 */ |
| <3 0 &gpio0 7 0>, /* A3 */ |
| <4 0 &gpio0 25 0>, /* A4 */ |
| <5 0 &gpio0 26 0>, /* A5 */ |
| <6 0 &gpio1 0 0>, /* D0 */ |
| <7 0 &gpio1 1 0>, /* D1 */ |
| <8 0 &gpio1 4 0>, /* D2 */ |
| <9 0 &gpio1 5 0>, /* D3 */ |
| <10 0 &gpio1 6 0>, /* D4 */ |
| <11 0 &gpio1 7 0>, /* D5 */ |
| <12 0 &gpio1 8 0>, /* D6 */ |
| <13 0 &gpio1 9 0>, /* D7 */ |
| <14 0 &gpio1 10 0>, /* D8 */ |
| <15 0 &gpio1 11 0>, /* D9 */ |
| <16 0 &gpio1 12 0>, /* D10 */ |
| <17 0 &gpio1 13 0>, /* D11 */ |
| <18 0 &gpio1 14 0>, /* D12 */ |
| <19 0 &gpio1 15 0>, /* D13 */ |
| <20 0 &gpio1 2 0>, /* D14 */ |
| <21 0 &gpio1 3 0>; /* D15 */ |
| }; |
| |
| /* These aliases are provided for compatibility with samples */ |
| aliases { |
| led0 = &led0; |
| led1 = &led1; |
| led2 = &led2; |
| led3 = &led3; |
| sw0 = &button0; |
| sw1 = &button1; |
| sw2 = &button2; |
| sw3 = &button3; |
| bootloader-led0 = &led0; |
| mcuboot-button0 = &button0; |
| mcuboot-led0 = &led0; |
| watchdog0 = &wdt0; |
| }; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| current-speed = <115200>; |
| pinctrl-0 = <&uart0_default>; |
| pinctrl-1 = <&uart0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| arduino_serial: &uart0{}; |
| |
| arduino_i2c: &i2c0 { |
| compatible = "nordic,nrf-twim"; |
| /* Cannot be used together with uart0. */ |
| /* status = "okay"; */ |
| pinctrl-0 = <&i2c0_default>; |
| pinctrl-1 = <&i2c0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| arduino_spi: &spi0 { |
| compatible = "nordic,nrf-spim"; |
| /* Cannot be used together with uart0. */ |
| /* status = "okay"; */ |
| cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */ |
| pinctrl-0 = <&spi0_default>; |
| pinctrl-1 = <&spi0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| }; |
| |
| &timer0 { |
| status = "okay"; |
| }; |
| |
| &timer1 { |
| status = "okay"; |
| }; |
| |
| &timer2 { |
| status = "okay"; |
| }; |
| |
| &flash1 { |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0xc000>; |
| }; |
| slot0_partition: partition@c000 { |
| label = "image-0"; |
| reg = <0x0000C000 0x12000>; |
| }; |
| slot1_partition: partition@1e000 { |
| label = "image-1"; |
| reg = <0x0001E000 0x12000>; |
| }; |
| scratch_partition: partition@30000 { |
| label = "image-scratch"; |
| reg = <0x00030000 0xa000>; |
| }; |
| storage_partition: partition@3a000 { |
| label = "storage"; |
| reg = <0x0003a000 0x6000>; |
| }; |
| }; |
| }; |
| |
| /* Include shared RAM configuration file */ |
| #include "nrf5340_shared_sram_planning_conf.dts" |