| :orphan: |
| |
| .. _zephyr_3.1: |
| |
| Zephyr 3.1.0 |
| ############ |
| |
| The following sections provide detailed lists of changes by component. |
| |
| API Changes |
| *********** |
| |
| Changes in this release |
| ======================= |
| |
| * All Zephyr public headers have been moved to ``include/zephyr``, meaning they |
| need to be prefixed with ``<zephyr/...>`` when included. Because this change |
| can potentially break many applications or libraries, |
| :kconfig:option:`CONFIG_LEGACY_INCLUDE_PATH` is provided to allow using the |
| old include path. This option is now enabled by default to allow a smooth |
| transition. In order to facilitate the migration to the new include prefix, a |
| script to automate the process is also provided: |
| :zephyr_file:`scripts/utils/migrate_includes.py`. |
| |
| * LoRaWAN: The message type parameter in :c:func:`lorawan_send` was changed |
| from ``uint8_t`` to ``enum lorawan_message_type``. If ``0`` was passed for |
| unconfirmed message, this has to be changed to ``LORAWAN_MSG_UNCONFIRMED``. |
| |
| * Disk Subsystem: SPI mode SD cards now use the SD subsystem to communicate |
| with SD cards. See :ref:`the disk access api <disk_access_api>` for an |
| example of the new devicetree binding format required. |
| |
| * Kconfig preprocessor function ``dt_nodelabel_has_compat`` was redefined, for |
| consistency with the ``dt_nodelabel_has_prop`` function and devicetree macros |
| like :c:func:`DT_NODE_HAS_COMPAT`. Now the function does not take into account |
| the status of the checked node. Its former functionality is provided by the |
| newly introduced ``dt_nodelabel_enabled_with_compat`` function. |
| |
| * CAN |
| |
| * Added ``const struct device`` parameter to the following CAN callback function signatures: |
| |
| * ``can_tx_callback_t`` |
| * ``can_rx_callback_t`` |
| * ``can_state_change_callback_t`` |
| |
| * Allow calling the following CAN API functions from userspace: |
| |
| * :c:func:`can_set_mode()` |
| * :c:func:`can_calc_timing()` |
| * :c:func:`can_calc_timing_data()` |
| * :c:func:`can_set_bitrate()` |
| * :c:func:`can_get_max_filters()` |
| |
| * Changed :c:func:`can_set_bitrate()` to use a sample point of 75.0% for bitrates over 800 kbit/s, |
| 80.0% for bitrates over 500 kbit/s, and 87.5% for all other bitrates. |
| |
| * Split CAN classic and CAN-FD APIs: |
| |
| * :c:func:`can_set_timing()` split into :c:func:`can_set_timing()` and |
| :c:func:`can_set_timing_data()`. |
| * :c:func:`can_set_bitrate()` split into :c:func:`can_set_bitrate()` and |
| :c:func:`can_set_bitrate_data()`. |
| |
| * Converted the ``enum can_mode`` into a ``can_mode_t`` bitfield and renamed the CAN mode |
| definitions: |
| |
| * ``CAN_NORMAL_MODE`` renamed to :c:macro:`CAN_MODE_NORMAL`. |
| * ``CAN_SILENT_MODE`` renamed to :c:macro:`CAN_MODE_LISTENONLY`. |
| * ``CAN_LOOPBACK_MODE`` renamed to :c:macro:`CAN_MODE_LOOPBACK`. |
| * The previous ``CAN_SILENT_LOOPBACK_MODE`` can be set using the bitmask ``(CAN_MODE_LISTENONLY | |
| CAN_MODE_LOOPBACK)``. |
| |
| * STM32H7: :kconfig:option:`CONFIG_NOCACHE_MEMORY` is no longer responsible for disabling |
| data cache when defined. Use ``CONFIG_DCACHE=n`` instead. |
| |
| * Converted the STM32F1 pin nodes configuration names to include remap information (in |
| cases other than NO_REMAP/REMAP_0) |
| For instance: |
| |
| * ``i2c1_scl_pb8`` renamed to ``i2c1_scl_remap1_pb8`` |
| |
| Removed APIs in this release |
| ============================ |
| |
| * STM32F1 Serial wire JTAG configuration (SWJ CFG) configuration choice |
| was moved from Kconfig to :ref:`devicetree <dt-guide>`. |
| See the :dtcompatible:`st,stm32f1-pinctrl` devicetree binding for more information. |
| As a consequence, the following Kconfig symbols were removed: |
| |
| * ``CONFIG_GPIO_STM32_SWJ_ENABLE`` |
| * ``CONFIG_GPIO_STM32_SWJ_NONJTRST`` |
| * ``CONFIG_GPIO_STM32_SWJ_NOJTAG`` |
| * ``CONFIG_GPIO_STM32_SWJ_DISABLE`` |
| |
| * Removed experimental 6LoCAN protocol support. |
| |
| * Removed the following deprecated CAN APIs: |
| |
| * Custom CAN error codes |
| * ``can_configure()`` |
| * ``can_attach_workq()`` |
| * ``can_attach_isr()`` |
| * ``can_attach_msgq()`` |
| * ``can_detach()`` |
| * ``can_register_state_change_isr()`` |
| * ``can_write()`` |
| |
| Deprecated in this release |
| ========================== |
| |
| * :c:func:`nvs_init` is deprecated in favor of utilizing :c:func:`nvs_mount`. |
| * :c:func:`lwm2m_engine_set_res_data` is deprecated in favor of :c:func:`lwm2m_engine_set_res_buf` |
| * :c:func:`lwm2m_engine_get_res_data` is deprecated in favor of :c:func:`lwm2m_engine_get_res_buf` |
| * The TinyCBOR module has been deprecated in favor of the new zcbor CBOR |
| library, included with Zephyr in this release. |
| |
| * GPIO |
| |
| * Deprecated the ``GPIO_INT_DEBOUNCE`` flag and the ``GPIO_DS_*`` and |
| ``GPIO_VOLTAGE_*`` groups of flags. Controller/SoC specific flags |
| should now be used instead. |
| |
| * SPI |
| |
| * Deprecated the ``gpio_dev``, ``gpio_pin``, and ``gpio_dt_flags`` members in |
| struct :c:struct:`spi_cs_control` in favor of a new struct |
| :c:struct:`gpio_dt_spec` member named ``gpio``. |
| |
| * PWM |
| |
| * The ``pin`` prefix has been removed from all PWM API calls. So for example, |
| ``pwm_pin_set_cycles`` is now ``pwm_set_cycles``. The old API calls are |
| still provided, but are now deprecated. |
| * PWM periods are now always set in nanoseconds, so ``_nsec`` and ``_usec`` |
| set functions such as ``pwm_pin_set_nsec()`` and ``pwm_pin_set_usec()`` |
| have been deprecated. Other units can be specified using, e.g. |
| ``PWM_USEC()`` macros, which convert other units to nanoseconds. |
| |
| * Utilities |
| |
| * :c:macro:`UTIL_LISTIFY` has been deprecated. Use :c:macro:`LISTIFY` instead. |
| |
| * Mesh |
| |
| * The following functions related to the Bluetooth Mesh Health Client model: |
| |
| * :c:func:`bt_mesh_health_fault_get()` replace with :c:func:`bt_mesh_health_cli_fault_get()` |
| * :c:func:`bt_mesh_health_fault_clear()` replace with :c:func:`bt_mesh_health_cli_fault_clear()` |
| * :c:func:`bt_mesh_health_fault_clear_unack()` replace with :c:func:`bt_mesh_health_cli_fault_clear_unack()` |
| * :c:func:`bt_mesh_health_fault_test()` replace with :c:func:`bt_mesh_health_cli_fault_test()` |
| * :c:func:`bt_mesh_health_fault_test_unack()` replace with :c:func:`bt_mesh_health_cli_fault_test_unack()` |
| * :c:func:`bt_mesh_health_period_get()` replace with :c:func:`bt_mesh_health_cli_period_get()` |
| * :c:func:`bt_mesh_health_period_set()` replace with :c:func:`bt_mesh_health_cli_period_set()` |
| * :c:func:`bt_mesh_health_period_set_unack()` replace with :c:func:`bt_mesh_health_cli_period_set_unack()` |
| * :c:func:`bt_mesh_health_attention_get()` replace with :c:func:`bt_mesh_health_cli_attention_get()` |
| * :c:func:`bt_mesh_health_attention_set()` replace with :c:func:`bt_mesh_health_cli_attention_set()` |
| * :c:func:`bt_mesh_health_attention_set_unack()` replace with :c:func:`bt_mesh_health_cli_attention_set_unack()` |
| |
| * The following function related to the Bluetooth Mesh Health Server model: |
| |
| * :c:func:`bt_mesh_fault_update()` replace with :c:func:`bt_mesh_health_srv_fault_update()` |
| |
| Stable API changes in this release |
| ================================== |
| |
| New APIs in this release |
| ======================== |
| |
| * Util |
| |
| * Added :c:macro:`IN_RANGE` for checking if a value is in the range of two |
| other values. |
| |
| * SDHC API |
| |
| * Added the :ref:`SDHC api <sdhc_api>`, used to interact with SD host controllers. |
| |
| * MIPI-DSI |
| |
| * Added a :ref:`MIPI-DSI api <mipi_dsi_api>`. This is an experimental API, |
| some of the features/APIs will be implemented later. |
| |
| * CAN |
| |
| * Added support for getting the minimum/maximum supported CAN timing parameters: |
| |
| * :c:func:`can_get_timing_min()` |
| * :c:func:`can_get_timing_max()` |
| * :c:func:`can_get_timing_data_min()` |
| * :c:func:`can_get_timing_data_max()` |
| |
| * Added support for enabling/disabling CAN-FD mode at runtime using :c:macro:`CAN_MODE_FD`. |
| |
| Bluetooth |
| ********* |
| |
| * Extended and Periodic advertising are no longer experimental |
| * Direction Finding is no longer experimental |
| * Added support for disabling Bluetooth, including a new ``bt_disable()`` API |
| call |
| |
| * Audio |
| |
| * Changed the implementation of PACS to indicate instead of notifying |
| * Added support for the Broadcast Audio Scan Service (BASS) |
| * Added support for the Hearing Access Service (HAS) |
| * Added support for the Telephone Bearer Service (TBS) |
| |
| * Direction Finding |
| |
| * Added sampling and switching offset configuration |
| |
| * Mesh |
| |
| * Added support for Proxy Client |
| * Added support for Provisioners over PB-GATT |
| * Added a new heartbeat publication callback option |
| |
| * Controller |
| |
| * Added support for the full ISO TX data path, including ISOAL |
| * Added support for ISO Broadcast Channel Map Update |
| * Added support for ISO Synchronized Receiver Channel Map Update |
| * The new implementation of LL Control Procedures is now the default whenever |
| Direction Finding is enabled |
| * Added support for all missing v3 and v4 DTM commands |
| * Implemented ISO-AL TX unframed fragmentation |
| * Added support for back-to-back receiving of PDUs on nRF5x platforms |
| * Increased the maximum number of simultaneous connections to 250 |
| |
| * HCI Driver |
| |
| * Added support for a new optional :c:member:`bt_hci_driver.close` API which |
| closes HCI transport. |
| * Implemented :c:member:`bt_hci_driver.close` on stm32wb HCI driver. |
| |
| * Host |
| |
| * The :c:enum:`bt_l2cap_chan_state` values ``BT_L2CAP_CONNECT`` and |
| ``BT_L2CAP_DISCONNECT`` have been renamed to ``BT_L2CAP_CONNECTING`` and |
| ``BT_L2CAP_DISCONNECTING`` respectively. |
| |
| * The callbacks :c:func:`pairing_complete`, :c:func:`pairing_failed`, and |
| :c:func:`bond_delete` have been moved from struct :c:struct:`bt_auth_cb` to a |
| newly created informational-only callback struct :c:struct:`bt_conn_auth_info_cb`. |
| |
| * :c:func:`bt_conn_index` now takes a ``const struct bt_conn*`` argument. |
| |
| * The :c:struct:`bt_gatt_subscribe_params` structure's ``write`` callback |
| function has been deprecated. Use the new ``subscribe`` callback |
| instead. |
| |
| * :c:func:`bt_disable` was added to enable the caller to disable the Bluetooth stack. |
| |
| * Added new Kconfig options to select ISO Central and Peripheral role support |
| separately |
| |
| * Added a new :c:func:`bt_get_appearance()` API call |
| |
| * Implemented support for dynamic appearance, including a new |
| :c:func:`bt_set_appearance()` API call |
| |
| * Implemented support for L2CAP collision mitigation |
| |
| * Changed the scheduling of auto-initiated HCI commands so that they execute |
| synchronously |
| |
| * Added a new :c:func:`bt_is_ready()` API call to find out if Bluetooth is |
| currently enabled and initialized |
| |
| * Added support for automatic MTU exchange right after a connection is |
| established |
| |
| * Created a new :c:struct:`bt_conn_auth_info_cb` to group the |
| security-related callbacks under a single struct |
| |
| * Optimized the memory usage of the Object Transfer Service |
| |
| * Added a new :c:func:`bt_hci_le_rand()` API call to obtain a random number |
| from the LE Controller |
| |
| * Added a new public API to connect EATT channels, :c:func:`bt_eatt_connect()` |
| |
| * Optimized L2CAP channels resource usage when not using dynamic channels |
| |
| * Added the ability to run the Bluetooth RX context from a workqueue, in order |
| to optimize RAM usage. See :kconfig:option:`CONFIG_BT_RECV_CONTEXT`. |
| |
| * Added support for TX complete callback on EATT channels |
| |
| * Corrected the calling of the MTU callback to happen on any reconfiguration |
| |
| Kernel |
| ****** |
| |
| * Aborting an essential thread now causes a kernel panic, as the |
| documentation has always promised but the kernel has never |
| implemented. |
| |
| * The k_timer handler can now correct itself for lost time due to very |
| late-arriving interrupts. |
| |
| * SMP interprocessor interrupts are deferred so that they are sent only at |
| schedule points, and not synchronously when the scheduler state |
| changes. This prevents IPI "storms" with code that does many |
| scheduler operations at once (e.g. waking up a bunch of threads). |
| |
| * The timeslicing API now allows slice times to be controlled |
| independently for each thread, and provides a callback to the app |
| when a thread timeslice has expired. The intent is that this will |
| allow apps the tools to implement CPU resource control algorithms |
| (e.g. fairness or interactivity metrics, budget tracking) that are |
| out of scope for Zephyr's deterministic RTOS scheduler. |
| |
| Architectures |
| ************* |
| |
| * ARC |
| |
| * Added ARCv3 32 bit (HS5x) support - both GNU and MWDT toolchains, both UP and SMP |
| * Worked around debug_select interference with MDB debugger |
| * Switched to hs6x mcpu usage (GNU toolchain) for HS6x |
| |
| * ARM |
| |
| * AARCH32 |
| |
| * Added Cortex-R floating point support |
| |
| * AARCH64 |
| |
| * Added support for GICv3 for the ARMv8 Xen Virtual Machine |
| * Fixed SMP boot code to take into account multiple cores booting at the same time |
| * Added more memory mapping types for device memory |
| * Simplified and optimize switching and user mode transition code |
| * Added support for CONFIG_IRQ_OFFLOAD_NESTED |
| * Fixed booting issue with FVP V8R >= 11.16.16 |
| * Switched to the IRQ stack during ISR execution |
| |
| * Xtensa |
| |
| * Optimized context switches when KERNEL_COHERENCE is enabled to |
| avoid needless stack invalidations for threads that have not |
| migrated between CPUs. |
| |
| * Fixed a bug that could return directly into a thread context from a |
| nested interrupt instead of properly returning to the preempted |
| ISR. |
| |
| * x64_64 |
| |
| * UEFI devices can now use the firmware-initialized system console |
| API as a printk/logging backend, simplifying platform bringup on |
| devices without known-working serial port configurations. |
| |
| Boards & SoC Support |
| ******************** |
| |
| * Added support for these SoC series: |
| |
| * STM32H725/STM32H730/STM32H73B SoC variants |
| |
| * Made these changes in other SoC series: |
| |
| * Added Atmel SAM UPLL clock support |
| * Raspberry Pi Pico: Added HWINFO support |
| * Raspberry Pi Pico: Added I2C support |
| * Raspberry Pi Pico: Added reset controller support |
| * Raspberry Pi Pico: Added USB support |
| |
| * Changes for ARC boards: |
| |
| * Added nsim_hs5x and nsim_hs5x_smp boards with ARCv3 32bit HS5x CPU |
| * Added MWDT toolchain support for nsim_hs6x and nsim_hs6x_smp |
| * Overhauled memory layout for nSIM boards. Added a mechanism to switch between |
| ICCM/DCCM memory layout and flat memory layout (i.e DDR). |
| * Did required platform setup so nsim_hs5x, nsim_hs5x_smp, nsim_hs6x, nsim_hs6x_smp |
| can be run on real HW (HAPS FPGA) with minimum additional configuration |
| * Enabled MWDT toolchain support for hsdk_2cores board |
| * Adjusted test duration for SMP nSIM boards with timeout_multiplier |
| |
| * Added support for these ARM boards: |
| |
| * b_g474e_dpow1 |
| * stm32f401_mini |
| |
| * Added support for these ARM64 boards: |
| |
| * NXP i.MX8MP EVK (i.MX8M Plus LPDDR4 EVK board) |
| * NXP i.MX8MM EVK (i.MX8M Mini LPDDR4 EVK board) |
| |
| * Added support for these RISC-V boards: |
| |
| * GigaDevice GD32VF103C-EVAL |
| |
| * Made these changes in other boards: |
| |
| * sam4s_xplained: Added support for HWINFO |
| * sam_e70_xlained: Added support for HWINFO and CAN-FD |
| * sam_v71_xult: Added support for HWINFO and CAN-FD |
| * gd32e103v_eval: Added prescaler to timer |
| * longan_nano: Added support for TF-Card slot |
| |
| * Added support for these following shields: |
| |
| * Keyestudio CAN-BUS Shield (KS0411) |
| * MikroElektronika WIFI and BLE Shield |
| * X-NUCLEO-53L0A1 ranging and gesture detection sensor expansion board |
| |
| Drivers and Sensors |
| ******************* |
| |
| * ADC |
| |
| * Atmel SAM0: Fixed adc voltage reference |
| * STM32: Added support for :c:enumerator:`adc_reference.ADC_REF_INTERNAL`. |
| * Added the :c:struct:`adc_dt_spec` structure and associated helper macros, |
| e.g. :c:macro:`ADC_DT_SPEC_GET`, to facilitate getting configuration of |
| ADC channels from devicetree nodes. |
| |
| * CAN |
| |
| * Switched from transmitting CAN frames in FIFO/chronological order to transmitting according to |
| CAN-ID priority (NXP FlexCAN, ST STM32 bxCAN, Bosch M_CAN, Microchip MCP2515). |
| * Added support for ST STM32U5 to the ST STM32 FDCAN driver. |
| * Renamed the base Bosch M_CAN devicetree binding compatible from ``bosch,m-can-base`` to |
| :dtcompatible:`bosch,m_can-base`. |
| * Added CAN controller statistics support (NXP FlexCAN, Renesas R-Car, ST STM32 bxCAN). |
| * Added CAN transceiver support. |
| * Added generic SocketCAN network interface and removed driver-specific implementations. |
| |
| * Clock_control |
| |
| * STM32: Driver was cleaned up and overhauled for easier maintenance with a deeper integration |
| of device tree inputs. Driver now takes into account individual activation of clock sources |
| (High/Medium/Low Internal/external speed clocks, PLLs, ...) |
| * STM32: Additionally to above change it is now possible for clock consumers to select an alternate |
| source clock (Eg: LSE) by adding it to its 'clocks' property and then configure it using new |
| clock_control_configure() API. |
| See :dtcompatible:`st,stm32-rcc`, :dtcompatible:`st,stm32h7-rcc` and :dtcompatible:`st,stm32u5-rcc` |
| for more information. |
| |
| * Counter |
| |
| * Added driver for NXP QTMR. |
| |
| * DAC |
| |
| * Added support for STM32F1 SoCs to the STM32 DAC driver. |
| |
| * Disk |
| |
| * Added a generic SDMMC disk driver, that uses the SD subsystem to interact with |
| disk devices. This disk driver will be used with any disk device declared |
| with the ``zephyr,sdmmc-disk`` compatible string. |
| |
| * Display |
| |
| * STM32: Added basic support for LTDC driver. Currently supported on F4, F7, H7, L4+ |
| and MP1 series. |
| |
| * DMA |
| |
| * Added a scatter gather test for DMAs that support it |
| * Cleanly shared Synopsis DW-DMA driver and Intel cAVS GPDMA driver code. |
| * Added support for Synposis DW-DMA transfer lists. |
| * Added support for Intel HDA for audio device and host streams. |
| * Fixes for NXP eDMA to pass scatter gather tests |
| |
| * Entropy |
| |
| * STM32: Prevented the core from entering stop modes during entropy operations. |
| |
| * Ethernet |
| |
| * eth_native_posix: Added support for setting MAC address. |
| * eth_stm32_hal: Fixed a bug which caused a segfault in case of a failed RX |
| buffer allocation. |
| * eth_mcux: Added support for resetting PHY. |
| * eth_liteeth: Refactored driver to use LiteX HAL. |
| * eth_w5500: Fixed possible deadlock due to incorrect IRQ processing. |
| |
| * Flash |
| |
| * Added STM32 OCTOSPI driver. Initial support is provided for L5 and U5 |
| series. Interrupt driven mode. Supports 1 and 8 lines in Single or Dual |
| Transfer Modes. |
| * STM32L5: Added support for Single Bank. |
| * STM32 QSPI driver was extended with with QER (SFDP, DTS), custom quad write opcode |
| and 1-1-4 read mode. |
| * Added support for STM32U5 series. |
| |
| * GPIO |
| |
| * Refactored GPIO devicetree flags. The upper 8 bits of ``gpio_dt_flags_t`` |
| are now reserved for controller/SoC specific flags. Certain |
| hardware-specific flags previously defined as common configuration (IO |
| voltage level, drive strength, and debounce filter) were replaced with ones |
| defined in this controller/SoC specific space. |
| * Added Xilinx PS MIO/EMIO GPIO controller driver. |
| * Extended the NXP PCA95XX driver to support also PCAL95XX. |
| |
| * HWINFO |
| |
| * Atmel SAM: Added RSTC support |
| * Raspberry Pi Pico: Added Unique ID and reset cause driver |
| |
| * I2C |
| |
| * Added arbitrary I2C clock speed support with :c:macro:`I2C_SPEED_DT` |
| * NXP flexcomm now supports target (slave) mode |
| * Fixed Atmel SAM/SAM0 exclusive bus access |
| * Added ITE support |
| |
| * I2S |
| |
| * Ported I2S drivers to pinctrl. |
| * Fixed multiple bugs in the NXP I2S (SAI) driver, including problems with |
| DMA transmission and FIFO under/overruns. |
| |
| * MEMC |
| |
| * STM32: Extended FMC driver to support NOR/PSRAM. See :dtcompatible:`st,stm32-fmc-nor-psram.yaml`. |
| |
| * Pin control |
| |
| * Platform support was added for: |
| |
| * Atmel SAM/SAM0 |
| * Espressif ESP32 |
| * ITE IT8XXX2 |
| * Microchip XEC |
| * Nordic nRF (completed support) |
| * Nuvoton NPCX Embedded Controller (EC) |
| * NXP iMX |
| * NXP Kinetis |
| * NXP LPC |
| * RV32M1 |
| * SiFive Freedom |
| * Telink B91 |
| * TI CC13XX/CC26XX |
| |
| * STM32: It is now possible to configure plain GPIO pins using the pinctrl API. |
| See :dtcompatible:`st,stm32-pinctrl` and :dtcompatible:`st,stm32f1-pinctrl` for |
| more information. |
| |
| * PWM |
| |
| * Added :c:struct:`pwm_dt_spec` and associated helpers, e.g. |
| :c:macro:`PWM_DT_SPEC_GET` or :c:func:`pwm_set_dt`. This addition makes it |
| easier to use the PWM API when the PWM channel, period and flags are taken |
| from a devicetree PWM cell. |
| * STM32: Enabled complementary output for timer channel. A PWM consumer can now use |
| :c:macro:`PWM_STM32_COMPLEMENTARY` to specify that PWM output should happen on a |
| complementary channel pincfg (eg:``tim1_ch2n_pb14``). |
| * STM32: Added counter mode support. See :dtcompatible:`st,stm32-timers`. |
| * Aligned nRF PWM drivers (pwm_nrfx and pwm_nrf5_sw) with the updated PWM API. |
| In particular, this means that the :c:func:`pwm_set` and |
| :c:func:`pwm_set_cycles` functions need to be called with a PWM channel |
| as a parameter, not with a pin number like it was for the deprecated |
| ``pwm_pin_set_*`` functions. Also, the ``flags`` parameter is now supported |
| by the drivers, so either the :c:macro:`PWM_POLARITY_INVERTED` or |
| :c:macro:`PWM_POLARITY_NORMAL` flag must be provided in each call. |
| |
| * Reset |
| |
| * Added reset controller driver API. |
| * Raspberry Pi Pico: Added reset controller driver |
| |
| * Sensor |
| |
| * Added NCPX ADC comparator driver. |
| * Enhanced the BME680 driver to support SPI. |
| * Enhanced the LIS2DW12 driver to support additional filtering and interrupt |
| modes. |
| * Added ICM42670 6-axis accelerometer driver. |
| * Enhanced the VL53L0X driver to support reprogramming its I2C address. |
| * Enhanced the Microchip XEC TACH driver to support pin control and MEC172x. |
| * Added ITE IT8XXX2 voltage comparator driver. |
| * Fixed register definitions in the LSM6DSL driver. |
| * Fixed argument passing bug in the ICM42605 driver. |
| * Removed redundant DEV_NAME helpers in various drivers. |
| * Enhanced the LIS2DH driver to support device power management. |
| * Fixed overflow issue in sensor_value_from_double(). |
| * Added MAX31875 temperature sensor driver. |
| |
| * Serial |
| |
| * STM32: Added tx/rx pin swap and rx invert / tx invert capabilities. |
| |
| * SPI |
| |
| * Ported all SPI drivers to pinctrl |
| * Added support for SPI on the GD32 family |
| |
| * Timer |
| |
| * Ported timer drivers to use pinctrl |
| * LiteX: Ported the timer driver to use the HAL |
| |
| * USB |
| |
| * Added RP2040 (Raspberry Pi Pico) USB device controller driver |
| |
| Networking |
| ********** |
| |
| * CoAP: |
| |
| * Changed :c:struct:`coap_pending` allocation criteria. This now uses a data |
| pointer instead of a timestamp, which does not give a 100% guarantee that |
| structure is not in use already. |
| |
| * Ethernet: |
| |
| * Added a |
| :kconfig:option:`CONFIG_NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE` |
| option, which allows to forward frames with unrecognised EtherType to the |
| netowrk stack. |
| |
| * HTTP: |
| |
| * Removed a limitation where the maximum content length was limited up to |
| 100000 bytes. |
| * Fixed ``http_client_req()`` return value. The function now correctly |
| reports the number of bytes sent. |
| * Clarified the expected behavior in case of empty response from the server. |
| * Made use of ``shutdown`` to tear down HTTP connection instead of |
| closing the socket from a system work queue. |
| |
| * LwM2M: |
| |
| * Various improvements towards LwM2M 1.1 support: |
| |
| * Added LwM2M 1.1 Discovery support. |
| * Added attribute handling for Resource Instances. |
| * Added support for Send, Read-composite, Write-composite, Observe-composite |
| operations. |
| * Added new content formats: SenML JSON, CBOR, SenML CBOR. |
| * Added v1.1 implementation of core LwM2M objects. |
| |
| * Added support for dynamic Resource Instance allocation. |
| * Added support for LwM2M Portfolio object (Object ID 16). |
| * Added LwM2M shell module. |
| * Added option to utilize DTLS session cache in queue mode. |
| * Added :c:func:`lwm2m_engine_path_is_observed` API function. |
| * Fixed a bug with hostname verification setting, which prevented DTLS |
| connection in certain mbedTLS configurations. |
| * Fixed a bug which could cause a socket descriptor leak, in case |
| :c:func:`lwm2m_rd_client_start` was called immediately after |
| :c:func:`lwm2m_rd_client_stop`. |
| * Added error reporting from :c:func:`lwm2m_rd_client_start` and |
| :c:func:`lwm2m_rd_client_stop`. |
| |
| * Misc: |
| |
| * Added :c:func:`net_if_set_default` function which allows to set a default |
| network interface at runtime. |
| * Added :kconfig:option:`CONFIG_NET_DEFAULT_IF_UP` option which allows to make the |
| first interface which is up the default choice. |
| * Fixed packet leak in network shell TCP receive handler. |
| * Added :c:func:`net_pkt_rx_clone` which allows to allocated packet from |
| correct packet pool when cloning. This is used at the loopback interface. |
| * Added :kconfig:option:`CONFIG_NET_LOOPBACK_SIMULATE_PACKET_DROP` option which |
| allows to simulate packet drop at the loopback interface. This is used by |
| certain test cases. |
| |
| * MQTT: |
| |
| * Removed custom logging macros from MQTT implementation, in favour of the |
| common networking logging. |
| |
| * OpenThread: |
| |
| * Updated OpenThread revision up to commit ``130afd9bb6d02f2a07e86b824fb7a79e9fca5fe0``. |
| * Implemented ``otPlatCryptoRand`` platform API for OpenThread. |
| * Added support for PSA MAC keys. |
| * Multiple minor fixes/improvements to align with upstream OpenThread changes. |
| |
| * Sockets: |
| |
| * Added support for ``shutdown()`` function. |
| * Fixed ``sendmsg()`` operation when TCP reported full transmission window. |
| * Added support for ``getpeername()`` function. |
| * Fixed userspace ``accept()`` argument validation. |
| * Added support for :c:macro:`SO_SNDBUF` and :c:macro:`SO_RCVBUF` socket |
| options. |
| * Implemented ``POLLOUT`` reporting from ``poll()`` for STREAM |
| sockets. |
| * Implemented socket dispatcher for offloaded sockets. This module allows to |
| use multiple offloaded socket implementations at the same time. |
| * Introduced a common socket priority for offloaded sockets |
| (:kconfig:option:`CONFIG_NET_SOCKETS_OFFLOAD_PRIORITY`). |
| * Moved socket offloading out of experimental. |
| |
| * TCP: |
| |
| * Implemented receive window handling. |
| * Implemented zero-window probe processing and sending. |
| * Improved TCP stack throughput over loopback interface. |
| * Fixed possible transmission window overflow in case of TCP retransmissions. |
| This could led to TX buffer starvation when TCP entered retransmission mode. |
| * Updated ``FIN_TIMEOUT`` delay to correctly reflect time needed for |
| all FIN packet retransmissions. |
| * Added proper error reporting from TCP to upper layers. This solves the |
| problem of connection errors being reported to the application as graceful |
| connection shutdown. |
| * Added a mechanism which allows upper layers to monitor the TCP transmission |
| window availability. This allows to improve throughput greatly in low-buffer |
| scenarios. |
| |
| * TLS: |
| |
| * Added :c:macro:`TLS_SESSION_CACHE` and :c:macro:`TLS_SESSION_CACHE_PURGE` |
| socket options which allow to control session caching on a socket. |
| * Fixed :c:macro:`TLS_CIPHERSUITE_LIST` socket option, which did not set the |
| cipher list on a socket correctly. |
| |
| USB |
| *** |
| |
| * Moved USB device stack code to own directory in preparation for upcoming |
| rework of USB support. |
| |
| Build System |
| ************ |
| |
| * The build system's internals have been completely overhauled for increased |
| modularity. This makes it easier to reuse individual components through the |
| Zephyr CMake package mechanism. |
| |
| With the improved Zephyr CMake package, the following examples are now possible: |
| |
| * ``find_package(Zephyr)``: load a standard build system, as before |
| * ``find_package(Zephyr COMPONENTS unittest)``: load a specific unittest |
| build component |
| * ``find_package(Zephyr COMPONENTS dts)``: only load the dts module and its |
| direct dependencies |
| * ``find_package(Zephyr COMPONENTS extensions west zephyr_module)``: load |
| multiple specific modules and their dependencies |
| |
| Some use cases that this work intends to enable are: |
| |
| * The sysbuild proposal: `Zephyr sysbuild / multi image #40555 |
| <https://github.com/zephyrproject-rtos/zephyr/pull/40555>`_ |
| * Running Zephyr CMake configure stages individually. One example is only |
| processing the devicetree steps of the build system, while skipping the |
| rest. This is a required feature for extending twister to do test case |
| filtering based on the devicetree contents without invoking a complete |
| CMake configuration. |
| |
| For more details, see :zephyr_file:`cmake/package_helper.cmake`. |
| |
| * A new Zephyr SDK has been created which now supports macOS and Windows in |
| addition to Linux platforms. |
| |
| For more information, see: https://github.com/zephyrproject-rtos/sdk-ng |
| |
| Devicetree |
| ********** |
| |
| * API |
| |
| * New macros for creating tokens in C from strings in the devicetree: |
| :c:macro:`DT_STRING_UPPER_TOKEN_OR`, :c:macro:`DT_INST_STRING_TOKEN`, |
| :c:macro:`DT_INST_STRING_UPPER_TOKEN`, |
| :c:macro:`DT_INST_STRING_UPPER_TOKEN_OR` |
| |
| * :ref:`devicetree-can-api`: new |
| |
| * Bindings |
| |
| * Several new bindings were created to support :ref:`Pin Control |
| <pinctrl-guide>` driver API implementations. This also affected many |
| peripheral bindings, which now support ``pinctrl-0``, ``pinctrl-1``, ..., |
| and ``pinctrl-names`` properties used to configure peripheral pin |
| assignments in different system states, such as active and low-power |
| states. |
| |
| In some cases, this resulted in the removal of old bindings, or other |
| backwards incompatible changes affecting users of the old bindings. These |
| changes include: |
| |
| * :dtcompatible:`atmel,sam-pinctrl` and :dtcompatible:`atmel,sam0-pinctrl` |
| have been adapted to the new pinctrl bindings interface |
| * :dtcompatible:`espressif,esp32-pinctrl` has replaced ``espressif,esp32-pinmux`` |
| * :dtcompatible:`ite,it8xxx2-pinctrl` and |
| :dtcompatible:`ite,it8xxx2-pinctrl-func` have replaced |
| ``ite,it8xxx2-pinmux`` and ``ite,it8xxx2-pinctrl-conf`` |
| * :dtcompatible:`microchip,xec-pinctrl`: new |
| * :dtcompatible:`nuvoton,npcx-pinctrl`: new |
| * :dtcompatible:`nxp,kinetis-pinctrl` has replaced the ``nxp,kinetis-port-pins`` property found in the ``nxp,kinetis-pinmux`` binding. |
| * :dtcompatible:`nxp,mcux-rt-pinctrl`, |
| :dtcompatible:`nxp,mcux-rt11xx-pinctrl`, |
| :dtcompatible:`nxp,lpc-iocon-pinctrl`, :dtcompatible:`nxp,rt-iocon-pinctrl`, |
| :dtcompatible:`nxp,lpc11u6x-pinctrl`, :dtcompatible:`nxp,imx7d-pinctrl`, |
| :dtcompatible:`nxp,imx8m-pinctrl`, :dtcompatible:`nxp,imx8mp-pinctrl` and |
| :dtcompatible:`nxp,imx-iomuxc`: new |
| * :dtcompatible:`openisa,rv32m1-pinctrl`: new |
| * :dtcompatible:`sifive,pinctrl` has replaced ``sifive,iof`` |
| * :dtcompatible:`telink,b91-pinctrl` has replaced ``telink,b91-pinmux`` |
| * :dtcompatible:`ti,cc13xx-cc26xx-pinctrl` has replaced ``ti,cc13xx-cc26xx-pinmux`` |
| |
| * PWM bindings now generally have ``#pwm-cells`` set to 3, not 2 as it was in |
| previous releases. This was done to follow the Linux convention that each |
| PWM specifier should contain a channel, period, and flags cell, in that |
| order. See pull request `#44523 |
| <https://github.com/zephyrproject-rtos/zephyr/pull/44523>`_ for more |
| details on this change and its purpose. |
| |
| * Some bindings had their :ref:`compatible properties <dt-important-props>` |
| renamed: |
| |
| * :dtcompatible:`nxp,imx-elcdif` has replaced ``fsl,imx6sx-lcdif`` |
| * :dtcompatible:`nxp,imx-gpr` has replaced ``nxp,imx-pinmux`` |
| * :dtcompatible:`nordic,nrf-wdt` has replaced ``nordic,nrf-watchdog`` |
| * :dtcompatible:`bosch,m_can-base` has replaced ``bosch,m-can-base`` |
| * :dtcompatible:`nxp,imx-usdhc` has replaced ``nxp,imx-sdhc`` |
| |
| * Bindings with ``resets`` (and optionally ``reset-names``) properties were |
| added to support the :ref:`reset_api` API. See the list of new bindings |
| below for some examples. |
| |
| * The ``zephyr,memory-region-mpu`` property can be set to generate MPU |
| regions from devicetree nodes. See commit `b91d21d32c |
| <https://github.com/zephyrproject-rtos/zephyr/commit/b91d21d32ccc312558babe2cc363afbe44ea2de2>`_ |
| |
| * The generic :zephyr_file:`dts/bindings/can/can-controller.yaml` include |
| file used for defining CAN controller bindings no longer contains a ``bus: |
| yaml`` statement. This was unused in upstream Zephyr; out of tree bindings |
| relying on this will need updates. |
| |
| * Bindings for ADC controller nodes can now use a child binding to specify |
| the initial configuration of individual channels in devicetree. See pull |
| request `43030 <https://github.com/zephyrproject-rtos/zephyr/pull/43030>`_ |
| for details. |
| |
| * New bindings for the following compatible properties were added: |
| |
| * :dtcompatible:`arduino-nano-header-r3` |
| * :dtcompatible:`arm,cortex-r52` |
| * :dtcompatible:`atmel,sam-rstc` |
| * :dtcompatible:`can-transceiver-gpio` (see also :ref:`devicetree-can-api`) |
| * :dtcompatible:`gd,gd32-spi` |
| * :dtcompatible:`hynitron,cst816s` |
| * :dtcompatible:`intel,cavs-gpdma` |
| * :dtcompatible:`intel,cavs-hda-host-in` and :dtcompatible:`intel,cavs-hda-host-out` |
| * :dtcompatible:`intel,cavs-hda-link-in` and :dtcompatible:`intel,cavs-hda-link-out` |
| * :dtcompatible:`intel,ssp-dai` |
| * :dtcompatible:`intel,ssp-sspbase` |
| * :dtcompatible:`invensense,icm42670` |
| * :dtcompatible:`ite,enhance-i2c` |
| * :dtcompatible:`ite,it8xxx2-vcmp` |
| * :dtcompatible:`ite,it8xxx2-wuc` and :dtcompatible:`ite,it8xxx2-wuc-map` |
| * :dtcompatible:`ite,peci-it8xxx2` |
| * :dtcompatible:`maxim,max31875` |
| * :dtcompatible:`microchip,cap1203` |
| * :dtcompatible:`microchip,mcp4728` |
| * :dtcompatible:`microchip,mpfs-qspi` |
| * :dtcompatible:`microchip,xec-bbram` |
| * :dtcompatible:`motorola,mc146818` |
| * :dtcompatible:`nordic,nrf-acl` |
| * :dtcompatible:`nordic,nrf-bprot` |
| * :dtcompatible:`nordic,nrf-ccm` |
| * :dtcompatible:`nordic,nrf-comp` |
| * :dtcompatible:`nordic,nrf-ctrlapperi` |
| * :dtcompatible:`nordic,nrf-dcnf` |
| * :dtcompatible:`nordic,nrf-gpio-forwarder` |
| * :dtcompatible:`nordic,nrf-lpcomp` |
| * :dtcompatible:`nordic,nrf-mpu` |
| * :dtcompatible:`nordic,nrf-mutex` |
| * :dtcompatible:`nordic,nrf-mwu` |
| * :dtcompatible:`nordic,nrf-nfct` |
| * :dtcompatible:`nordic,nrf-oscillators` |
| * :dtcompatible:`nordic,nrf-ppi` |
| * :dtcompatible:`nordic,nrf-reset` |
| * :dtcompatible:`nordic,nrf-swi` |
| * :dtcompatible:`nordic,nrf-usbreg` |
| * :dtcompatible:`nuvoton,adc-cmp` |
| * :dtcompatible:`nxp,imx-mipi-dsi` |
| * :dtcompatible:`nxp,imx-qtmr` |
| * :dtcompatible:`nxp,imx-tmr` |
| * :dtcompatible:`raspberrypi,pico-reset` |
| * :dtcompatible:`raspberrypi,pico-usbd` |
| * :dtcompatible:`raydium,rm68200` |
| * :dtcompatible:`riscv,sifive-e31`, :dtcompatible:`riscv,sifive-e51`, |
| and :dtcompatible:`riscv,sifive-s7` CPU bindings |
| * :dtcompatible:`seeed,grove-lcd-rgb` |
| * :dtcompatible:`st,lsm6dso32` |
| * :dtcompatible:`st,stm32-clock-mux` |
| * :dtcompatible:`st,stm32-fmc-nor-psram` |
| * :dtcompatible:`st,stm32-lse-clock` |
| * :dtcompatible:`st,stm32-ltdc` |
| * :dtcompatible:`st,stm32-ospi` and :dtcompatible:`st,stm32-ospi-nor` |
| * :dtcompatible:`st,stm32h7-fmc` |
| * TI ADS ADCs: :dtcompatible:`ti,ads1013`, :dtcompatible:`ti,ads1015`, |
| :dtcompatible:`ti,ads1113`, :dtcompatible:`ti,ads1114`, |
| :dtcompatible:`ti,ads1115`, :dtcompatible:`ti,ads1014` |
| * :dtcompatible:`ti,tlc5971` |
| * :dtcompatible:`xlnx,fpga` |
| * :dtcompatible:`xlnx,ps-gpio` and :dtcompatible:`xlnx,ps-gpio-bank` |
| * :dtcompatible:`zephyr,bt-hci-entropy` |
| * :dtcompatible:`zephyr,ipc-icmsg` |
| * :dtcompatible:`zephyr,memory-region` |
| * :dtcompatible:`zephyr,sdhc-spi-slot` |
| |
| * Bindings for the following compatible properties were removed: |
| |
| * ``bosch,m-can`` |
| * ``nxp,imx-usdhc`` |
| * ``shared-multi-heap`` |
| * ``snps,creg-gpio-mux-hsdk`` |
| * ``snps,designware-pwm`` |
| * ``zephyr,mmc-spi-slot`` |
| |
| * Numerous other additional properties were added to bindings throughout the tree. |
| |
| Libraries / Subsystems |
| ********************** |
| |
| * C Library |
| |
| * Minimal libc |
| |
| * Added ``[U]INT_{FAST,LEAST}N_{MIN,MAX}`` minimum and maximum value |
| macros in ``stdint.h``. |
| * Added ``PRIx{FAST,LEAST}N`` and ``PRIxMAX`` format specifier macros in |
| ``inttypes.h``. |
| * Fixed ``gmtime()`` access fault when userspace is enabled and |
| ``gmtime()`` is called from a user mode thread. This function can be |
| safely called from both kernel and user mode threads. |
| |
| * Newlib |
| |
| * Fixed access fault when calling the newlib math functions from a user |
| mode thread. All ``libm.a`` globals are now placed into the |
| ``z_libc_partition`` when userspace is enabled. |
| |
| * C++ Subsystem |
| |
| * Renamed all C++ source and header files to use the ``cpp`` and ``hpp`` |
| extensions, respectively. All Zephyr upstream C++ source and header files |
| are now required to use these extensions. |
| |
| * Management |
| |
| * MCUMGR has been migrated from using TinyCBOR, for CBOR encoding, to zcbor. |
| * MCUMGR :kconfig:option:`CONFIG_FS_MGMT_UL_CHUNK_SIZE` and |
| :kconfig:option:`CONFIG_IMG_MGMT_UL_CHUNK_SIZE` have been deprecated as, |
| with the introduction of zcbor, it is no longer needed to use an intermediate |
| buffer to copy data out of CBOR encoded buffer. The file/image chunk size |
| is now limited by :kconfig:option:`CONFIG_MCUMGR_BUF_SIZE` minus all the |
| other command required variables. |
| * Added support for MCUMGR Parameters command, which can be used to obtain |
| MCUMGR parameters; :kconfig:option:`CONFIG_OS_MGMT_MCUMGR_PARAMS` enables |
| the command. |
| * Added mcumgr fs handler for getting file status which returns file size; |
| controlled with :kconfig:option:`CONFIG_FS_MGMT_FILE_STATUS` |
| * Added mcumgr fs handler for getting file hash/checksum, with support for |
| IEEE CRC32 and SHA256, the following Kconfig options have been added to |
| control the addition: |
| |
| * :kconfig:option:`CONFIG_FS_MGMT_CHECKSUM_HASH` to enable the command; |
| * :kconfig:option:`CONFIG_FS_MGMT_CHECKSUM_HASH_CHUNK_SIZE` that sets size |
| of buffer (stack memory) used for calculation: |
| |
| * :kconfig:option:`CONFIG_FS_MGMT_CHECKSUM_IEEE_CRC32` enables support for |
| IEEE CRC32. |
| * :kconfig:option:`CONFIG_FS_MGMT_HASH_SHA256` enables SHA256 hash support. |
| * When hash/checksum query to mcumgr does not specify a type, then the order |
| of preference (most priority) is CRC32 followed by SHA256. |
| |
| * Added mcumgr os hook to allow an application to accept or decline a reset |
| request; :kconfig:option:`CONFIG_OS_MGMT_RESET_HOOK` enables the callback. |
| * Added mcumgr fs hook to allow an application to accept or decline a file |
| read/write request; :kconfig:option:`CONFIG_FS_MGMT_FILE_ACCESS_HOOK` |
| enables the feature which then needs to be registered by the application. |
| * Added supplied image header to mcumgr img upload callback parameter list |
| which allows the application to inspect it to determine if it should be |
| allowed or declined. |
| * Made the ``img_mgmt_vercmp()`` function public to allow application- |
| level comparison of image versions. |
| * mcumgr will now only return ``MGMT_ERR_ENOMEM`` when it fails to allocate |
| a memory buffer for request processing, when previously it would wrongly |
| report this error when the SMP response failed to fit into a buffer; |
| now when encoding of response fails ``MGMT_ERR_EMSGSIZE`` will be |
| reported. This addresses issue :github:`44535`. |
| * Added :kconfig:option:`CONFIG_IMG_MGMT_USE_HEAP_FOR_FLASH_IMG_CONTEXT` that |
| allows user to select whether the heap will be used for flash image context, |
| when heap pool is configured. Previously usage of heap has been implicit, |
| with no control from a developer, causing issues reported by :github:`44214`. |
| The default, implicit, behaviour has not been kept and the above |
| Kconfig option needs to be selected to keep previous behaviour. |
| |
| |
| * SD Subsystem |
| |
| * Added the SD subsystem, which is used by the |
| :ref:`disk access api <disk_access_api>` to interact with connected SD cards. |
| This subsystem uses the :ref:`SDHC api <sdhc_api>` to interact with the SD |
| host controller the SD device is connected to. |
| |
| * Power management |
| |
| * Added :kconfig:option:`CONFIG_PM_DEVICE_POWER_DOMAIN_DYNAMIC`. |
| This option enables support for dynamically bind devices to a Power Domain. The |
| memory required to dynamically bind devices is pre-allocated at build time and |
| is based on the number of devices set in |
| :kconfig:option:`CONFIG_PM_DEVICE_POWER_DOMAIN_DYNAMIC_NUM`. The API introduced |
| to use this feature are: |
| |
| * :c:func:`pm_device_power_domain_add()` |
| * :c:func:`pm_device_power_domain_remove()` |
| |
| * The default policy was renamed from ``PM_POLICY_RESIDENCY`` to |
| ``PM_POLICY_DEFAULT``, and ``PM_POLICY_APP`` was renamed to |
| ``PM_POLICY_CUSTOM``. |
| |
| * The following functions were renamed: |
| |
| * :c:func:`pm_power_state_next_get()` is now :c:func:`pm_state_next_get()` |
| * :c:func:`pm_power_state_force()` is now :c:func:`pm_state_force()` |
| |
| * Removed the deprecated function :c:func:`pm_device_state_set()`. |
| |
| * The state constraint APIs were moved (and renamed) to the policy |
| API and accounts substates. |
| |
| * :c:func:`pm_constraint_get()` is now :c:func:`pm_policy_state_lock_is_active()` |
| * :c:func:`pm_constraint_set()` is now :c:func:`pm_policy_state_lock_get()` |
| * :c:func:`pm_constraint_release()` is now :c:func:`pm_policy_state_lock_put()` |
| |
| * Added a new API to set maximum latency requirements. The ``DEFAULT`` policy |
| will account for latency when computing the next state. |
| |
| * :c:func:`pm_policy_latency_request_add()` |
| * :c:func:`pm_policy_latency_request_update()` |
| * :c:func:`pm_policy_latency_request_remove()` |
| |
| * The API to set a device initial state was changed to be usable independently of |
| :kconfig:option:`CONFIG_PM_DEVICE_RUNTIME`. |
| |
| * :c:func:`pm_device_runtime_init_suspended()` is now :c:func:`pm_device_init_suspended()` |
| * :c:func:`pm_device_runtime_init_off()` is now :c:func:`pm_device_init_off()` |
| |
| * IPC |
| |
| * static_vrings: Fixed work queue (WQ) initialization |
| * static_vrings: Introduced atomic helpers when accessing atomic_t variables |
| * static_vrings: Moved to one WQ per instance |
| * static_vrings: Added "zephyr,priority" property in the DT to set the WQ priority of the instance |
| * static_vrings: Added configuration parameter to initialize shared memory to zero |
| * Extended API with NOCOPY functions |
| * static_vrings: Added support for NOCOPY operations |
| * Introduced inter core messaging backend (icmsg) that relies on simple inter core messaging buffer |
| |
| * Logging |
| |
| * Added UART frontend which supports binary dictionary logging. |
| * Added support for MIPI SyS-T catalog messages. |
| * Added cAVS HDA backend. |
| |
| * Shell |
| |
| * Added API for creating subcommands from multiple files using memory section approach: |
| |
| * :c:macro:`SHELL_SUBCMD_SET_CREATE` for creating a subcommand set. |
| * :c:macro:`SHELL_SUBCMD_COND_ADD` and :c:macro:`SHELL_SUBCMD_ADD` for adding subcommands |
| to the set. |
| |
| HALs |
| **** |
| |
| * Atmel |
| |
| * Added devicetree bindings, documentation, and scripts to support |
| state-based pin control (``pinctrl``) API. |
| * Imported new SoC header files for: |
| |
| * SAML21 |
| * SAMR34 |
| * SAMR35 |
| |
| * GigaDevice |
| |
| * Fixed GD32_REMAP_MSK macro |
| * Fixed gd32f403z pc3 missing pincodes |
| |
| * STM32: |
| |
| * Updated stm32f4 to new STM32cube version V1.27.0 |
| * Updated stm32f7 to new STM32cube version V1.16.2 |
| * Updated stm32g4 to new STM32cube version V1.5.0 |
| * Updated stm32h7 to new STM32cube version V1.10.0 |
| * Updated stm32l4 to new STM32cube version V1.17.1 |
| * Updated stm32u5 to new STM32cube version V1.1.0 |
| * Updated stm32wb to new STM32cube version V1.13.2 (including hci lib) |
| |
| MCUboot |
| ******* |
| |
| - Added initial support for devices with a write alignment larger than 8B. |
| - Added an option for entering serial recovery mode with a timeout. See ``CONFIG_BOOT_SERIAL_WAIT_FOR_DFU``. |
| - Used a smaller sha256 implementation. |
| - Added support for the echo command in serial recovery. See ``CONFIG_BOOT_MGMT_ECHO``. |
| - Fixed image decryption for SoC flash with page sizes larger than 1024 B in single loader mode. |
| - Fixed a possible output buffer overflow in serial recovery. |
| - Added a GitHub workflow for verifying integration with Zephyr. |
| - Removed deprecated ``DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL``. |
| - Fixed usage of ``CONFIG_LOG_IMMEDIATE``. |
| |
| Trusted Firmware-m |
| ****************** |
| |
| * Updated to TF-M 1.6.0 |
| |
| Documentation |
| ************* |
| |
| * Reorganised and consolidated documentation for improved readability and |
| user experience. |
| * Replaced the existing statically rendered Kconfig documentation with the new |
| Kconfig documentation engine that dynamically renders the Kconfig contents |
| for improved search performance. |
| * Added a 'Language Support' sub-category under the 'Developing with Zephyr' |
| category that provides details regarding C and C++ language and standard |
| library support status. |
| * Added a 'Toolchain' sub-category under the 'Developing with Zephyr' category |
| that lists all supported toolchains along with instructions for how to configure |
| and use them. |
| |
| Tests and Samples |
| ***************** |
| |
| * A dedicated framework was added to test the STM32 clock_control driver. |
| |
| Issue summary |
| ************* |
| |
| This section lists security vulnerabilities, other known bugs, and all issues |
| addressed during the v3.1.0 development period. |
| |
| Security Vulnerability Related |
| ============================== |
| |
| The following CVEs are addressed by this release: |
| |
| More detailed information can be found in: |
| https://docs.zephyrproject.org/latest/security/vulnerabilities.html |
| |
| * CVE-2022-1841: Under embargo until 2022-08-18 |
| * CVE-2022-1042: Under embargo until 2022-06-19 |
| * CVE-2022-1041: Under embargo until 2022-06-19 |
| |
| Known bugs |
| ========== |
| |
| - :github:`23302` - Poor TCP performance |
| - :github:`25917` - Bluetooth: Deadlock with TX of ACL data and HCI commands (command blocked by data) |
| - :github:`30348` - XIP can't be enabled with ARC MWDT toolchain |
| - :github:`31298` - tests/kernel/gen_isr_table failed on hsdk and nsim_hs_smp sometimes |
| - :github:`33747` - gptp does not work well on NXP rt series platform |
| - :github:`34226` - Compile error when building civetweb samples for posix_native |
| - :github:`34600` - Bluetooth: L2CAP: Deadlock when there are no free buffers while transmitting on multiple channels |
| - :github:`36358` - Potential issue with CMAKE_OBJECT_PATH_MAX |
| - :github:`37193` - mcumgr: Probably incorrect error handling with udp backend |
| - :github:`37704` - hello world doesn't work on qemu_arc_em when CONFIG_ISR_STACK_SIZE=1048510 |
| - :github:`37731` - Bluetooth: hci samples: Unable to allocate command buffer |
| - :github:`38041` - Logging-related tests fails on qemu_arc_hs6x |
| - :github:`38544` - drivers: wifi: esWIFI: Regression due to 35815 |
| - :github:`38654` - drivers: modem: bg9x: Has no means to update size of received packet. |
| - :github:`38880` - ARC: ARCv2: qemu_arc_em / qemu_arc_hs don't work with XIP disabled |
| - :github:`38947` - Issue with SMP commands sent over the UART |
| - :github:`39347` - Static object constructors do not execute on the NATIVE_POSIX_64 target |
| - :github:`39888` - STM32L4: usb-hid: regression in hal 1.17.0 |
| - :github:`40023` - Build fails for ``native_posix`` board when using C++ <atomic> header |
| - :github:`41281` - Style Requirements Seem to Be Inconsistent with Uncrustify Configuration |
| - :github:`41286` - Bluetooth SDP: When the SDP attribute length is greater than SDP_MTU, the attribute is discarded |
| - :github:`41606` - stm32u5: Re-implement VCO input and EPOD configuration |
| - :github:`41622` - Infinite mutual recursion when SMP and ATOMIC_OPERATIONS_C are set |
| - :github:`41822` - BLE IPSP sample cannot handle large ICMPv6 Echo Request |
| - :github:`42030` - can: "bosch,m-can-base": Warning "missing or empty reg/ranges property" |
| - :github:`42134` - TLS handshake error using DTLS on updatehub |
| - :github:`42574` - i2c: No support for bus recovery imx.rt and or timeout on bus busy |
| - :github:`42629` - stm32g0: Device hang/hard fault with AT45 + ``CONFIG_PM_DEVICE`` |
| - :github:`42842` - BBRAM API is missing a documentation reference page |
| - :github:`43115` - Data corruption in STM32 SPI driver in Slave Mode |
| - :github:`43246` - Bluetooth: Host: Deadlock with Mesh and Ext Adv on native_posix |
| - :github:`43249` - MBEDTLS_ECP_C not build when MBEDTLS_USE_PSA_CRYPTO |
| - :github:`43308` - driver: serial: stm32: uart will lost data when use dma mode[async mode] |
| - :github:`43390` - gPTP broken in Zephyr 3.0 |
| - :github:`43515` - reel_board: failed to run tests/kernel/workq/work randomly |
| - :github:`43555` - Variables not properly initialized when using data relocation with SDRAM |
| - :github:`43562` - Setting and/or documentation of Timer and counter use/requirements for Nordic Bluetooth driver |
| - :github:`43646` - mgmt/mcumgr/lib: OS taskstat may give shorter list than expected |
| - :github:`43655` - esp32c3: Connection fail loop |
| - :github:`43811` - ble: gatt: db_hash_work runs for too long and makes serial communication fail |
| - :github:`43828` - Intel CAVS: multiple tests under tests/boards/intel_adsp/smoke are failing |
| - :github:`43836` - stm32: g0b1: RTT doesn't work properly after stop mode |
| - :github:`43887` - SystemView tracing with STM32L0x fails to compile |
| - :github:`43910` - civetweb/http_server - DEBUG_OPTIMIZATIONS enabled |
| - :github:`43928` - pm: going to PM_STATE_SOFT_OFF in pm_policy_next_state causes assert in some cases |
| - :github:`43933` - llvm: twister: multiple errors with set but unused variables |
| - :github:`44062` - Need a way to deal with stack size needed when running coverage report. |
| - :github:`44214` - mgmt/mcumgr/lib: Parasitic use of CONFIG_HEAP_MEM_POOL_SIZE in image management |
| - :github:`44219` - mgmt/mcumgr/lib: Incorrect processing of img_mgmt_impl_write_image_data leaves mcumgr in broken state in case of error |
| - :github:`44228` - drivers: modem: bg9x: bug on cmd AT+QICSGP |
| - :github:`44324` - Compile error in byteorder.h |
| - :github:`44377` - ISO Broadcast/Receive sample not working with coded PHY |
| - :github:`44403` - MPU fault and ``CONFIG_CMAKE_LINKER_GENERATOR`` |
| - :github:`44410` - drivers: modem: shell: ``modem send`` doesn't honor line ending in modem cmd handler |
| - :github:`44579` - MCC: Discovery cannot complete with success |
| - :github:`44622` - Microbit v2 board dts file for lsm303agr int line |
| - :github:`44725` - drivers: can: stm32: can_add_rx_filter() does not respect CONFIG_CAN_MAX_FILTER |
| - :github:`44898` - mgmt/mcumgr: Fragmentation of responses may cause mcumgr to drop successfully processed response |
| - :github:`44925` - intel_adsp_cavs25: multiple tests failed after running tests/boards/intel_adsp |
| - :github:`44948` - cmsis_dsp: transofrm: error during building cf64.fpu and rf64.fpu for mps2_an521_remote |
| - :github:`44996` - logging: transient strings are no longer duplicated correctly |
| - :github:`44998` - SMP shell exec command causes BLE stack breakdown if buffer size is too small to hold response |
| - :github:`45105` - ACRN: failed to run testcase tests/kernel/fifo/fifo_timeout/ |
| - :github:`45117` - drivers: clock_control: clock_control_nrf |
| - :github:`45157` - cmake: Use of -ffreestanding disables many useful optimizations and compiler warnings |
| - :github:`45168` - rcar_h3ulcb: failed to run test case tests/drivers/can/timing |
| - :github:`45169` - rcar_h3ulcb: failed to run test case tests/drivers/can/api |
| - :github:`45218` - rddrone_fmuk66: I2C configuration incorrect |
| - :github:`45222` - drivers: peci: user space handlers not building correctly |
| - :github:`45241` - (Probably) unnecessary branches in several modules |
| - :github:`45270` - CMake - TEST_BIG_ENDIAN |
| - :github:`45304` - drivers: can: CAN interfaces are brought up with default bitrate at boot, causing error frames if bus bitrate differs |
| - :github:`45315` - drivers: timer: nrf_rtc_timer: NRF boards take a long time to boot application in CONFIG_TICKLESS_KERNEL=n mode after OTA update |
| - :github:`45349` - ESP32: fails to chain-load sample/board/esp32/wifi_station from MCUboot |
| - :github:`45374` - Creating the unicast group before both ISO connections have been configured might cause issue |
| - :github:`45441` - SPI NOR driver assume all SPI controller HW is implemnted in an identical way |
| - :github:`45509` - ipc: ipc_icmsg: Can silently drop buffer if message is too big |
| - :github:`45532` - uart_msp432p4xx_poll_in() seems to be a blocking function |
| - :github:`45564` - Zephyr does not boot with CONFIG_PM=y |
| - :github:`45581` - samples: usb: mass: Sample.usb.mass_flash_fatfs fails on non-secure nrf5340dk |
| - :github:`45596` - samples: Code relocation nocopy sample has some unusual failure on nrf5340dk |
| - :github:`45647` - test: drivers: counter: Test passes even when no instances are found |
| - :github:`45666` - Building samples about BLE audio with nrf5340dk does not work |
| - :github:`45675` - testing.ztest.customized_output: mismatch twister results in json/xml file |
| - :github:`45678` - Lorawan: Devnonce has already been used |
| - :github:`45760` - Running twister on new board files |
| - :github:`45774` - drivers: gpio: pca9555: Driver is writing to output port despite all pins having been configured as input |
| - :github:`45802` - Some tests reported as PASSED (device) but they were only build |
| - :github:`45807` - CivetWeb doesn't build for CC3232SF |
| - :github:`45814` - Armclang build fails due to missing source file |
| - :github:`45842` - drivers: modem: uart_mux errors after second call to gsm_ppp_start |
| - :github:`45844` - Not all bytes are downloaded with HTTP request |
| - :github:`45845` - tests: The failure test case number increase significantly in CMSIS DSP tests on ARM boards. |
| - :github:`45848` - tests: console harness: inaccuracy testcases report |
| - :github:`45866` - drivers/entropy: stm32: non-compliant RNG configuration on some MCUs |
| - :github:`45914` - test: tests/kernel/usage/thread_runtime_stats/ test fail |
| - :github:`45929` - up_squared：failed to run test case tests/posix/common |
| - :github:`45951` - modem: ublox-sara-r4: outgoing datagrams are truncated if they do not fit MTU |
| - :github:`45953` - modem: simcom-sim7080: sendmsg() should result in single outgoing datagram |
| - :github:`46008` - stm32h7: gptp sample does not work at all |
| - :github:`46049` - Usage faults on semaphore usage in driver (stm32l1) |
| - :github:`46066` - TF-M: Unable to trigger NMI interrupt from non-secure |
| - :github:`46072` - [ESP32] Debug log error in hawkbit example "CONFIG_LOG_STRDUP_MAX_STRING" |
| - :github:`46073` - IPSP (IPv6 over BLE) example stop working after a short time |
| - :github:`46121` - Bluetooth: Controller: hci: Wrong periodic advertising report data status |
| - :github:`46124` - stm32g071 ADC drivers apply errata during sampling config |
| - :github:`46126` - pm_device causes assertion error in sched.c with lis2dh |
| - :github:`46157` - ACRN: some cases still failed because of the log missing |
| - :github:`46158` - frdm_k64f：failed to run test case tests/subsys/modbus/modbus.rtu/server_setup_low_none |
| - :github:`46167` - esp32: Unable to select GPIO for PWM LED driver channel |
| - :github:`46170` - ipc_service: open-amp backend may never leave |
| - :github:`46173` - nRF UART callback is not passed correct index via evt->data.rx.offset sometimes |
| - :github:`46186` - ISO Broadcaster fails silently on unsupported RTN/SDU_Interval combination |
| - :github:`46199` - LIS2DW12 I2C driver uses invalid write command |
| - :github:`46206` - it8xxx2_evb: tests/kernel/fatal/exception/ assertion failed -- "thread was not aborted" |
| - :github:`46208` - it8xxx2_evb: tests/kernel/sleep failed, elapsed_ms = 2125 |
| - :github:`46234` - samples: lsm6dso: prints incorrect anglular velocity units |
| - :github:`46235` - subsystem: Bluetooth LLL: ASSERTION FAIL [!link->next] |
| - :github:`46255` - imxrt1010 wrong device tree addresses |
| - :github:`46263` - Regulator Control |
| |
| Addressed issues |
| ================ |
| |
| * :github:`46241` - Bluetooth: Controller: ISO: Setting CONFIG_BT_CTLR_ISO_TX_BUFFERS=4 breaks non-ISO data |
| * :github:`46140` - Custom driver offload socket creation failing |
| * :github:`46138` - Problem with building zephyr/samples/subsys/mgmt/mcumgr/smp_svr using atsame70 |
| * :github:`46137` - RFC: Integrate u8g2 monochrome graphcial library as module to Zephyr OS (https://github.com/olikraus/u8g2) |
| * :github:`46129` - net: lwm2m: Object Update Callbacks |
| * :github:`46102` - samples: net: W5500 implementation |
| * :github:`46097` - b_l072z_lrwan1 usart dma doesn't work |
| * :github:`46093` - get a run error "Fatal exception (28): LoadProhibited" while enable CONFIG_NEWLIB_LIBC=y |
| * :github:`46091` - samples: net: cloud: tagoio: Drop pinmux dependency |
| * :github:`46059` - LwM2M: Software management URI resource not updated properly |
| * :github:`46056` - ``unexpected eof`` with twister running ``tests/subsys/logging/log_api/logging.log2_api_immediate_printk_cpp`` on ``qemu_leon3`` |
| * :github:`46037` - ESP32 : fails to build the mcuboot, zephyr v3.1.0 rc2, sdk 0.14.2 |
| * :github:`46034` - subsys settings: should check the return value of function cs->cs_itf->csi_load(cs, &arg). |
| * :github:`46033` - twister: incorrect display of test results |
| * :github:`46027` - tests: rpi_pico tests fails on twister with: No rule to make target 'bootloader/boot_stage2.S |
| * :github:`46026` - Bluetooth: Controller: llcp: Wrong effective time calculation if PHY changed |
| * :github:`46023` - drivers: reset: Use of reserved identifier ``assert`` |
| * :github:`46020` - module/mcuboot: doesn't build with either RSA or ECISE-X25519 image encryption |
| * :github:`46017` - Apply for contributor |
| * :github:`46002` - NMP timeout when i am using any mcumgr command |
| * :github:`45996` - stm32F7: DCache configuration is not correctly implemented |
| * :github:`45948` - net: socket: dtls: sendmsg() should result in single outgoing datagram |
| * :github:`45946` - net: context: outgoing datagrams are truncated if not enough memory was allocated |
| * :github:`45942` - tests: twister: harness: Test harness report pass when there is no console output |
| * :github:`45933` - webusb sample code linking error for esp32 board |
| * :github:`45932` - tests: subsys/logging/log_syst : failed to build on rpi_pico |
| * :github:`45916` - USART on STM32: Using same name for different remapping configurations |
| * :github:`45911` - LVGL sample cannot be built with CONFIG_LEGACY_INCLUDE_PATH=n |
| * :github:`45904` - All tests require full timeout period to pass after twister overhaul when executed on HW platform |
| * :github:`45894` - up_squared：the test shows pass in the twister.log it but does not seem to finish |
| * :github:`45893` - MCUboot authentication failure with RSA-3072 key on i.MX RT 1160 EVK |
| * :github:`45886` - ESP32: PWM parameter renaming broke compilation |
| * :github:`45883` - Bluetooth: Controller: CCM reads data before Radio stores them when DF enabled on PHY 1M |
| * :github:`45882` - Zephyr minimal C library contains files licensed with BSD-4-Clause-UC |
| * :github:`45878` - doc: release: Update release notes with CVE |
| * :github:`45876` - boards: h747/h745: Update dual core flash and debug instructions |
| * :github:`45875` - bluetooth: hci_raw: avoid possible memory overflow in bt_buf_get_tx() |
| * :github:`45873` - soc: esp32: use PYTHON_EXECUTABLE from build system |
| * :github:`45872` - ci: make git credentials non-persistent |
| * :github:`45871` - ci: split Bluetooth workflow |
| * :github:`45870` - drivers: virt_ivshmem: Allow multiple instances of ivShMem devices |
| * :github:`45869` - doc: update requirements |
| * :github:`45865` - CODEOWNERS has errors |
| * :github:`45862` - USB ECM/RNDIS Can't receive broadcast messages |
| * :github:`45856` - blinky built with asserts on arduino nano |
| * :github:`45855` - Runtime fault when running with CONFIG_NO_OPTIMIZATIONS=y |
| * :github:`45854` - Bluetooth: Controller: llcp: Assert if LL_REJECT_IND PDU received while local and remote control procedure is pending |
| * :github:`45851` - For native_posix programs, k_yield doesn't yield to k_msleep threads |
| * :github:`45839` - Bluetooth: Controller: df: Possible memory overwrite if requested number of CTE is greater than allowed by configuration |
| * :github:`45836` - samples: Bluetooth: unicast_audio_server invalid check for ISO flags |
| * :github:`45834` - SMP Server Sample needs ``-DDTC_OVERLAY_FILE=usb.overlay`` for CDC_ACM |
| * :github:`45828` - mcumgr: img_mgmt_dfu_stopped is called on a successful erase |
| * :github:`45827` - bluetooth: bluetooth host: Adding the same device to resolving list |
| * :github:`45826` - Bluetooth: controller: Assert in lll.c when executing LL/CON/INI/BV-28-C |
| * :github:`45821` - STM32U5: clock_control: Issue to get rate of alt clock source |
| * :github:`45820` - bluetooth: host: Failed to set security right after reconnection with bonded Central |
| * :github:`45800` - Clock control settings for MCUX Audio Clock are Incorrect |
| * :github:`45799` - LED strip driver flips colors on stm32h7 |
| * :github:`45795` - driver: pinctrl: npcx: get build error when apply pinctrl mechanism to a DT node without reg prop. |
| * :github:`45791` - drivers/usb: stm32: Superfluous/misleading Kconfig option |
| * :github:`45790` - drivers: can: stm32h7: wrong minimum timing values |
| * :github:`45784` - nominate me as zephyr contributor |
| * :github:`45783` - drivers/serial: ns16550: message is garbled |
| * :github:`45779` - Implementing ARCH_EXCEPT on Xtensa unmasks nested interrupt handling bug |
| * :github:`45778` - Unable to use thread aware debugging with STM32H743ZI |
| * :github:`45761` - MCUBoot with multi-image support on Zephyr project for i.MX RT1165 EVK |
| * :github:`45755` - ESP32 --defsym:1: undefined symbol \`printf' referenced in expression - using CONFIG_NEWLIB_LIBC |
| * :github:`45750` - tests-ci : kernel: timer: tickless test_sleep_abs Failed |
| * :github:`45751` - tests-ci : drivers: counter: basic_api test_multiple_alarms Failed |
| * :github:`45739` - stm32h7: DCache configuration is not correctly implemented |
| * :github:`45735` - Ethernet W5500 Driver via SPI is deadlocking |
| * :github:`45725` - Bluetooth: Controller: df: CTE request not disabled if run in single shot mode |
| * :github:`45714` - Unable to get TCA9548A to work |
| * :github:`45713` - twister: map generation fails |
| * :github:`45708` - Bluetooth: Controller: llcp: CTE request control procedure has missing support for LL_UNKNOWN_RSP |
| * :github:`45706` - tests: error_hook: mismatch testcases in testplan.json |
| * :github:`45702` - Reboot instead of halting the system |
| * :github:`45697` - RING_BUF_DECLARE broken for C++ |
| * :github:`45691` - missing testcase tests/drivers/watchdog on nucleo stm32 boards |
| * :github:`45686` - missing testcase samples/drivers/led_pwm on nucleo stm32 boards |
| * :github:`45672` - Bluetooth: Controller: can't cancel periodic advertising sync create betwee ll_sync_create and reception of AUX__ADV_IND with SyncInfo |
| * :github:`45670` - Intel CAVS: log missing of tests/lib/p4workq/ |
| * :github:`45664` - mqtt_publisher does not work in atsame54_xpro board |
| * :github:`45648` - pm: device_runtime: API functions fault when PM not supported |
| * :github:`45632` - ESP32 get error "undefined reference to \`sprintf' " while CONFIG_NEWLIB_LIBC=y |
| * :github:`45630` - ipc_service: Align return codes for available backends. |
| * :github:`45611` - GD32 build failure: CAN_MODE_NORMAL is redefined |
| * :github:`45593` - tests: newlib: test_malloc_thread_safety fails on nrf9160dk_nrf9160_ns |
| * :github:`45583` - Typo in definition of lsm6ds0.h |
| * :github:`45580` - ESP32-C3: CONFIG_ESP32_PHY_MAX_TX_POWER undeclared error when building with CONFIG_BT=y |
| * :github:`45578` - cmake: gcc --print-multi-directory doesn't print full path and checks fails |
| * :github:`45577` - STM32L4: USB MSC doesn't work with SD card |
| * :github:`45568` - STM32H7xx: Driver for internal flash memory partially uses a fixed flash program word size, which doesn't fit for all STM32H7xx SOCs (e.g. STM32H7A3, STM32H7B0, STM32H7B3) leading to potential flash data corruption |
| * :github:`45557` - doc: Some generic yaml bindings don't show up in dts/api/bindings.html#dt-no-vendor |
| * :github:`45549` - bt_gatt_write_without_response_cb doesn't use callback |
| * :github:`45545` - K_ESSENTIAL option doesn't have any effect on k_create_thread |
| * :github:`45543` - Build samples/bluetooth/broadcast_audio_sink raises an error |
| * :github:`45542` - Implementing firmware image decompression in img_mgmt_upload() |
| * :github:`45533` - uart_imx_poll_in() seems to be a blocking function |
| * :github:`45529` - GdbStub get_mem_region bug |
| * :github:`45518` - LPCXpresso55S69 incorrect device name for JLink runner |
| * :github:`45514` - UDP Packet socket doesn't do L2 header processing |
| * :github:`45505` - NXP MIMXRT1050-EVKB: MCUBoot Serial Recover: mcumgr hangs when trying to upload image |
| * :github:`45488` - Build warnings when no GPIO ports enabled |
| * :github:`45486` - MCUBootloader can't building for imxrt1160_evk_cm7 core |
| * :github:`45482` - Adding, building and linking Lua in a project |
| * :github:`45468` - Is uart_poll_in() blocking or not? |
| * :github:`45463` - null function pointer called when using shell logger backend under heavy load |
| * :github:`45458` - it8xxx2_evb: tests/drivers/pwm/pwm_api assertion fail |
| * :github:`45443` - SAMD21: Wrong voltage reference set by enum adc_reference |
| * :github:`45440` - Intel CAVS: intel_adsp_hda testsuite is failing due to time out on intel_adsp_cavs15 |
| * :github:`45431` - Bluetooth: Controller: df: Wrong antenna identifier inserted after switch pattern exhausted |
| * :github:`45426` - Data buffer allocation: TCP stops working |
| * :github:`45421` - Zephyr build image(sample blinky application) not getting flash through NXP Secure Provisioning Tool V4.0 for i.MX RT 1166EVK |
| * :github:`45407` - Support for flashing the Zephyr based application on i.MX RT 1160 EVK through SDP Mode(USB-HID/ UART) & PyOCD runner |
| * :github:`45405` - up_squared: most of the test case timeout |
| * :github:`45404` - Bluetooth: Controller: Periodic advertising scheduling is broken, TIFS/TMAFS maintenance corrupted |
| * :github:`45401` - test-ci: adc: lpcxpresso55s28: adc pinctl init error |
| * :github:`45394` - Bug when sending a BLE proxy mesh msg of length exactly 2x the MTU size |
| * :github:`45390` - MinGW-w64: Cannot build Zephyr project |
| * :github:`45395` - Programming NXP i.MX RT OTP fuse with west |
| * :github:`45372` - PWM not working |
| * :github:`45371` - frdm_k64f: failed to run test case tests/net/socket/offload_dispatcher |
| * :github:`45367` - net: tcp: Scheduling dependent throughput |
| * :github:`45365` - Zephyr IP Stack Leaks in Promiscuous Mode |
| * :github:`45362` - sample/net/sockets/dumb_http_server not working with enc28j60 |
| * :github:`45361` - samples/bluetooth/hci_usb doesn't build for nucleo_wb55rg |
| * :github:`45359` - USB DFU sample does not work on RT series boards |
| * :github:`45355` - Twister fails when west is not present |
| * :github:`45345` - Make FCB work with sectors larger than 16K |
| * :github:`45337` - timing: missing extern "C" in timing.h |
| * :github:`45336` - newlib: PRIx8 inttype incorrectly resolves to ``hh`` with newlib-nano |
| * :github:`45324` - NET_TCP_BACKLOG_SIZE is unused, it has to be either implemented or deleted |
| * :github:`45322` - tests: drivers: pwm_api fails with stm32 devices |
| * :github:`45316` - drivers: timer: nrf_rtc_timer: SYS_CLOCK_TICKS_PER_SEC too high for when CONFIG_KERNEL_TICKLESS=n |
| * :github:`45314` - subsystem: Bluetooth LLL: ASSERTION FAIL [!link->next] @ ZEPHYR_BASE/subsys/bluetooth/controller/ll_sw/ull_conn.c:1952 |
| * :github:`45303` - drivers: can: CAN classic and CAN-FD APIs are mixed together and CAN-FD is a compile-time option |
| * :github:`45302` - Bus Fault with Xilinx UART Lite |
| * :github:`45280` - GPIO Configuration Issue |
| * :github:`45278` - twister: Run_id check feature breaks workflows with splitted building and testing. |
| * :github:`45276` - Add support for multiple zero-latency irq priorities |
| * :github:`45268` - Error newlibc ESP32 |
| * :github:`45267` - kernel: Recursive spinlock in k_msgq_get() in the context of a k_work_poll handler |
| * :github:`45266` - teensy41: pwm sample unable to build |
| * :github:`45261` - mcumgr: conversion of version to string fails (snprintf format issue) |
| * :github:`45248` - Avoid redefining 32-bit integer types like __UINT32_TYPE__ |
| * :github:`45237` - RFC: API Change: Bluetooth - replace callback in bt_gatt_subscribe_param |
| * :github:`45229` - sample: spi: bitbang: spi_bitbang sample has improper definition of its test |
| * :github:`45226` - samples/drivers/led_pwm: Build failure |
| * :github:`45219` - drivers: can: transceivers are initialized after controllers |
| * :github:`45209` - Minimal LIBC missing macros |
| * :github:`45189` - sam_e70b_xplained: failed to run test case tests/benchmarks/cmsis_dsp/basicmath |
| * :github:`45186` - Building Zephyr on Ubuntu fails when ZEPHYR_TOOLCHAIN_VARIANT is set to llvm |
| * :github:`45185` - Intel CAVS: tests under tests/ztest/register/ are failing |
| * :github:`45182` - MCUBoot Usage Fault on RT1060 EVK |
| * :github:`45172` - Bluetooth: attr->user_data is NULL when doing discovery with BT_GATT_DISCOVER_ATTRIBUTE |
| * :github:`45155` - STM32 serial port asynchronous initialization TX DMA channel error |
| * :github:`45152` - ``tests/subsys/logging/log_stack`` times out on ``qemu_arc_hs6x`` with twister |
| * :github:`45129` - mimxrt1050_evk: GPIO button pushed only once |
| * :github:`45123` - driver: can_stm32fd: STM32U5 series support |
| * :github:`45118` - Error claiming older doc is the latest |
| * :github:`45112` - Cannot install watchdog timeout on STM32WB |
| * :github:`45111` - fvp_base_revc_2xaemv8a: multiple test failures |
| * :github:`45110` - fvp_baser_aemv8r_smp: multiple test failures |
| * :github:`45108` - fvp_baser_aemv8r: multiple test failures |
| * :github:`45089` - stm32: usart: rx pin inversion missing |
| * :github:`45073` - nucleo_h743zi failing twister builds due to NOCACHE_MEMORY warning |
| * :github:`45072` - [Coverity CID: 248346] Copy into fixed size buffer in /subsys/bluetooth/shell/bt.c |
| * :github:`45045` - mec172xevb_assy6906: tests/arch/arm/arm_irq_vector_table failed to run |
| * :github:`45012` - sam_e70b_xplained: failed to run test case tests/drivers/can/timing/drivers.can.timing |
| * :github:`45009` - twister: many tests failed with "mismatch error" after met a SerialException. |
| * :github:`45008` - esp32: i2c_read() error was returned successfully at the bus nack |
| * :github:`45006` - Bluetooth HCI SPI fault |
| * :github:`44997` - zcbor build error when ZCBOR_VERBOSE is set |
| * :github:`44985` - tests: drivers: can: timing: failure to set bitrate of 800kbit/s on nucleo_g474re |
| * :github:`44977` - samples: modules: canopennode: failure to initialize settings subsystem on nucleo_g474re |
| * :github:`44966` - build fails for nucleo wb55 rg board. |
| * :github:`44956` - Deprecate the old spi_cs_control fields |
| * :github:`44947` - cmsis_dsp: matrix: error during building libraries.cmsis_dsp.matrix.unary_f64 for qemu_cortex_m3 |
| * :github:`44940` - rom_report creates two identical identifier but for different path in rom.json |
| * :github:`44938` - Pin assignments SPIS nrf52 |
| * :github:`44931` - Bluetooth: Samples: broadcast_audio_source stack overflow |
| * :github:`44927` - Problems in using STM32 Hal Library |
| * :github:`44926` - intel_adsp_cavs25: can not build multiple tests under tests/posix/ and tests/lib/newlib/ |
| * :github:`44921` - Can't run hello_world using mps_an521_remote |
| * :github:`44913` - Enabling BT_CENTRAL breaks MESH advertising |
| * :github:`44910` - Issue when installing Python additional dependencies |
| * :github:`44904` - PR#42879 causes a hang in the shell history |
| * :github:`44902` - x86: FPU registers are not initialised for userspace (eager FPU sharing) |
| * :github:`44887` - it8xxx2_evb: tests/kernel/sched/schedule_api/ assertion fail |
| * :github:`44886` - Unable to boot Zephyr on FVP_BaseR_AEMv8R |
| * :github:`44882` - doc: Section/chapter "Supported Boards" missing from pdf documentation |
| * :github:`44874` - error log for locking a mutex in an ISR |
| * :github:`44872` - k_timer callback timing incorrect with multiple lightly loaded cores |
| * :github:`44871` - mcumgr endless loop in mgmt_find_handler |
| * :github:`44864` - tcp server tls error：server has no certificate |
| * :github:`44856` - Various kernel timing-related tests fail on hifive1 board |
| * :github:`44837` - drivers: can: mcp2515: can_set_timing() performs a soft-reset of the MCP2515, discarding configured mode |
| * :github:`44834` - Add support for gpio expandeux NXP PCAL95xx |
| * :github:`44831` - west flash for nucleo_u575zi_q is failing |
| * :github:`44830` - Unable to set compiler warnings on app exclusively |
| * :github:`44822` - STM32F103 Custom Board Clock Config Error |
| * :github:`44811` - STRINGIFY does not work with mcumgr |
| * :github:`44798` - promote Michael to the Triage permission level |
| * :github:`44797` - x86: Interrupt handling not working for cores <> core0 - VMs not having core 0 assigned cannot handle IRQ events. |
| * :github:`44778` - stdint types not recognized in soc_common.h |
| * :github:`44777` - disco_l475_iot1 default CONFIG_BOOT_MAX_IMG_SECTORS should be 512 not 256 |
| * :github:`44758` - intel_adsp: kernel.common tests are failing |
| * :github:`44752` - Nominate @brgl as contributor |
| * :github:`44750` - Using STM32 internal ADC with interrupt: |
| * :github:`44737` - Configurable LSE driving capability on H735 |
| * :github:`44734` - regression in GATT/SR/GAS/BV-06-C qualification test case |
| * :github:`44731` - mec172xevb_assy6906: test/drivers/adc/adc_api test case build fail |
| * :github:`44730` - zcbor ARRAY_SIZE conflict with zephyr include |
| * :github:`44728` - Fresh Build and Flash of Bluetooth Peripheral Sample Produces Error on P-Nucleo-64 Board (STM32WBRG) |
| * :github:`44724` - can: drivers: mcux: flexcan: correctly handle errata 5461 and 5829 |
| * :github:`44722` - lib: posix: support for pthread_attr_setstacksize |
| * :github:`44721` - drivers: can: mcan: can_mcan_add_rx_filter() unconditionally adds offset for extended CAN-ID filters |
| * :github:`44706` - drivers: can: mcp2515: mcp2515_set_mode() silently ignores unsupported modes |
| * :github:`44705` - Windows getting started references wget usage without step for installing wget |
| * :github:`44704` - Bootloader linking error while building for RPI_PICO |
| * :github:`44701` - advertising with multiple advertising sets fails with BT_HCI_ERR_MEM_CAPACITY_EXCEEDED |
| * :github:`44691` - west sign fails to find header size or padding |
| * :github:`44690` - ST kit b_u585i_iot02a and OCTOSPI flash support |
| * :github:`44687` - drivers: can: missing syscall verifier for can_get_max_filters() |
| * :github:`44680` - drivers: can: mcux: flexcan: can_set_mode() resets IP, discarding installed RX filters |
| * :github:`44678` - mcumgr: lib: cmd: img_mgmt: Warning about struct visibility emitted with certain Kconfig options |
| * :github:`44676` - mimxrt1050_evk_qspi crash or freeze when accessing flash |
| * :github:`44670` - tests-ci : kernel: tickless: concept test Timeout |
| * :github:`44671` - tests-ci : kernel: scheduler: deadline test failed |
| * :github:`44672` - tests-ci : drivers: counter: basic_api test failed |
| * :github:`44659` - Enhancement to k_thread_state_str() |
| * :github:`44621` - ASCS: Sink ASE stuck in Releasing state |
| * :github:`44600` - NMI testcase fails on tests/arch/arm/arm_interrupt with twister |
| * :github:`44586` - nrf5340: Random crashes when a lot of interrupts is triggered |
| * :github:`44584` - SWO log output does not compile for STM32WB55 |
| * :github:`44573` - Do we have complete RNDIS stack available for STM32 controller in zephyr ? |
| * :github:`44558` - Possible problem with timers |
| * :github:`44557` - tests: canbus: isotp: implementation: fails on mimxrt1024_evk |
| * :github:`44553` - General Question: Compilation Time >15 Minutes? |
| * :github:`44546` - Bluetooth: ISO: Provide stream established information |
| * :github:`44544` - shell_module/sample.shell.shell_module.usb fails for thingy53_nrf5340_cpuapp_ns |
| * :github:`44539` - twister fails on several stm32 boards with tests/arch/arm testcases |
| * :github:`44535` - mgmt/mcumgr/lib: Incorrect use of MGMT_ERR_ENOMEM, in most cases where it is used |
| * :github:`44531` - bl654_usb without mcuboot maximum image size is not limited |
| * :github:`44530` - xtensa xcc build usb stack fail (newlib) |
| * :github:`44519` - Choosing CONFIG_CHIP Kconfig breaks LwM2M client client example build |
| * :github:`44507` - net: tcp: No retries of a TCP FIN message |
| * :github:`44504` - net: tcp: Context still open after timeout on connect |
| * :github:`44497` - Add guide for disabling MSD on JLink OB devices and link to from smp_svr page |
| * :github:`44495` - sys_slist_append_list and sys_slist_merge_slist corrupt target slist if appended or merged list is empty |
| * :github:`44489` - Docs: missing documentation related to MCUBOOT serial recovery feature |
| * :github:`44488` - Self sensor library from private git repository |
| * :github:`44486` - nucleo_f429zi: multiple networking tests failing |
| * :github:`44484` - drivers: can: mcp2515: The MCP2515 driver uses wrong timing limits |
| * :github:`44483` - drivers: can: mcan: data phase prescaler bounds checking uses wrong value |
| * :github:`44482` - drivers: can: mcan: CAN_SJW_NO_CHANGE not accepted with CONFIG_ASSERT=y |
| * :github:`44480` - bt_le_adv_stop null pointer exception |
| * :github:`44478` - Zephyr on Litex/Vexriscv not booting |
| * :github:`44473` - net: tcp: Connection does not properly terminate when connection is lost |
| * :github:`44453` - Linker warnings in watchdog samples and tests built for twr_ke18f |
| * :github:`44449` - qemu_riscv32 DHCP fault |
| * :github:`44439` - Bluetooth: Controller: Extended and Periodic Advertising HCI Component Conformance Test Coverage |
| * :github:`44427` - SYS_CLOCK_HW_CYCLES_PER_SEC not correct for hifive1_revb / FE310 |
| * :github:`44404` - Porting stm32h745 for zephyr |
| * :github:`44397` - twister: test case error number discrepancy in the result |
| * :github:`44391` - tests-ci : peripheral: gpio: 1pin test Timeout |
| * :github:`44438` - tests-ci : arch: interrupt: arm.nmi test Unknown |
| * :github:`44386` - Zephyr SDK 0.14.0 does not contain a sysroots directory |
| * :github:`44374` - Twister: Non-intact handler.log files when running tests and samples folders |
| * :github:`44361` - drivers: can: missing syscall verifier for can_set_mode() |
| * :github:`44349` - Nordic BLE fails assertion when logging is enabled |
| * :github:`44348` - drivers: can: z_vrfy_can_recover() does not compile |
| * :github:`44347` - ACRN: multiple tests failed due to incomplete log |
| * :github:`44345` - drivers: can: M_CAN bus recovery function has the wrong signature |
| * :github:`44344` - drivers: can: mcp2515 introduces a hard dependency on CONFIG_CAN_AUTO_BUS_OFF_RECOVERY |
| * :github:`44338` - intel_adsp_cavs18: multiple tests failed due to non-intact log |
| * :github:`44314` - rddrone_fmuk66: fatal error upon running basic samples |
| * :github:`44307` - LE Audio: unicast stream/ep or ACL disconnect reset should not terminate the CIG |
| * :github:`44296` - Bluetooth: Controller: DF: IQ sample of CTE signals are not valid if PHY is 1M |
| * :github:`44295` - Proposal for subsystem for media |
| * :github:`44284` - LE Audio: Missing recv_info for BAP recv |
| * :github:`44283` - Bluetooth: ISO: Add TS flag for ISO receive |
| * :github:`44274` - direction_finding_connectionless_rx/tx U-Blox Nora B106 EVK |
| * :github:`44271` - mgmt/mcumgr: BT transport: Possible buffer overflow (and crash) when reciving SMP when CONFIG_MCUMGR_BUF_SIZE < transport MTU |
| * :github:`44262` - mimxrt1050_evk: build time too long for this platform |
| * :github:`44261` - twister: some changes make test cases work abnormally. |
| * :github:`44259` - intel_adsp_cavs18: tests/lib/icmsg failed |
| * :github:`44255` - kernel: While thread is running [thread_state] is in _THREAD_QUEUED |
| * :github:`44251` - ``CONFIG_USB_DEVICE_REMOTE_WAKEUP`` gets default value `y` if not set |
| * :github:`44250` - Can't build WiFi support on esp32, esp32s2, esp32c3 |
| * :github:`44247` - west build -b nrf52dk_nrf52832 samples/boards/nrf/clock_skew failed |
| * :github:`44244` - Bluetooth: Controller: ISO BIS payload counter rollover |
| * :github:`44240` - tests: drivers: pwm_api: PWM driver test doesn't compile for mec172xevb_assy6906 |
| * :github:`44239` - boards: arm: mec152x/mec172x CONFIG_PWM=y doesn't compile PWM driver |
| * :github:`44231` - Problems trying to configure the environment |
| * :github:`44218` - libc: minimal: qsort_r not working as expected |
| * :github:`44216` - tests: drivers: counter_basic_api: Build failing on LPCxpresso55s69_cpu |
| * :github:`44215` - tests: subsys: cpp: over half of tests failing on macOS but do not fail on Linux |
| * :github:`44213` - xtensa arch_cpu_idle not correct on cavs18+ platforms |
| * :github:`44199` - (U)INT{32,64}_C macro constants do not match the Zephyr stdint types |
| * :github:`44192` - esp32 flash custom partition table |
| * :github:`44186` - Possible race condition in TCP connection establishment |
| * :github:`44145` - Zephyr Panic dump garbled on Intel cAVS platforms |
| * :github:`44134` - nRF52833 current consumption too high |
| * :github:`44128` - Deprecate DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL |
| * :github:`44125` - drivers/ethernet/eth_stm32_hal.c: eth_stm32_hal_set_config() always returns -ENOTSUP (-134) |
| * :github:`44110` - Bluetooth: synced callback may have wrong addr type |
| * :github:`44109` - Device tree error while porting zephyr for a custom board |
| * :github:`44108` - ``CONFIG_ZTEST_NEW_API=y`` broken with ``CONFIG_TEST_USERSPACE=y`` |
| * :github:`44107` - The SMP nsim boards are started incorrectly when launching on real HW |
| * :github:`44106` - test of dma drivers fails on dma_m2m_loop_test |
| * :github:`44101` - a build error when CONFIG_MULTITHREADING=n |
| * :github:`44092` - rand32_ctr_drbg fails to call the respective initialization routing |
| * :github:`44089` - logging: shell backend: null-deref when logs are dropped |
| * :github:`44072` - mcumgr smp source is checking variable without it being set and causing automated test failures |
| * :github:`44070` - west spdx TypeError: 'NoneType' object is not iterable |
| * :github:`44043` - Usage fault when running flash shell sample on RT1064 EVK |
| * :github:`44029` - Unexpected behavior of CONFIG_LOG_OVERRIDE_LEVEL |
| * :github:`44018` - net: tcp: Running out of buffers by packet loss |
| * :github:`44012` - net: tcp: Cooperative scheduling transfer size limited |
| * :github:`44010` - frdm_k64f: failed to run testcase samples/kernel/metairq_dispatch/ |
| * :github:`44006` - intel_adsp_cavs25: tests/drivers/dma/loop_transfer failed |
| * :github:`44004` - Bluetooth: ascs: Invalid ASE state transition: Releasing -> QoS Configured |
| * :github:`43993` - doc: Fix minor display issue for west spdx extension command |
| * :github:`43990` - How to make civetweb run on a specified network card |
| * :github:`43988` - Extracting the index of a child node referenced using alias |
| * :github:`43980` - No PWM signal on Nucleo F103RB using TIM1 CH2 PA9 |
| * :github:`43976` - [lwm2m_engine / sockets] Possibility to decrease timeout on connect() |
| * :github:`43975` - tests: kernel: scheduler: Test from kernel.scheduler.slice_perthread fails on some nrf platforms |
| * :github:`43972` - UART: uart_poll_in() not working in Shell application |
| * :github:`43964` - k_timer callback timing gets unreliable with more cores active |
| * :github:`43950` - code_relocation: Add NOCOPY feature breaks windows builds |
| * :github:`43949` - drivers: espi: mec172x: ESPI flash write and erase operations not working |
| * :github:`43948` - drivers: espi: xec: MEC172x: Driver enables all bus interrupts but doesn't handle them causing starvation |
| * :github:`43946` - Bluetooth: Automatic ATT MTU negotiation |
| * :github:`43940` - Support for CH32V307 devices |
| * :github:`43930` - nRF52833 High Power Consumption with 32.768kHz RC Oscillator |
| * :github:`43924` - ipc_service: Extend API with zero-copy send |
| * :github:`43899` - can: stm32: Build issue on g4 target |
| * :github:`43898` - Twister: test case number discrepancy in the result xml. |
| * :github:`43891` - networking: detect initialisation failures of backing drivers |
| * :github:`43888` - adc: stm32: compilation broken on G4 targets |
| * :github:`43874` - mec172xevb_assy6906: tests/drivers/spi/spi_loopback test case UART output wrong. |
| * :github:`43873` - tests:ci:lpcxpresso55s06: portability.posix.common.newlib meet hard fault |
| * :github:`43872` - tests:ci:lpcxpresso55s06:libraries.cmsis_dsp.matrix.unary_f32 test fails |
| * :github:`43870` - test:ci:lpcxpresso55s06: hwinfo test meet hardfault |
| * :github:`43867` - mec172xevb_assy6906: tests/drivers/pwm/pwm_api test case build fail. |
| * :github:`43865` - Add APDS-9250 I2C Driver |
| * :github:`43864` - mec172xevb_assy6906: tests/drivers/pwm/pwm_loopback test case failed to build |
| * :github:`43858` - mcumgr seems to lock up when it receives command for group that does not exist |
| * :github:`43856` - mec172xevb_assy6906: tests/drivers/i2c/i2c_api i2c_test failed |
| * :github:`43851` - LE Audio: Make PACS location optional |
| * :github:`43838` - mec172xevb_assy6906: tests/drivers/adc/adc_dma test case build fail |
| * :github:`43842` - tests-ci : libraries: encoding: jwt test Timeout |
| * :github:`43841` - tests-ci : net: socket: tls.preempt test Timeout |
| * :github:`43835` - ``zephyr_library_compile_options()`` fails to apply if the same setting is set for multiple libraries in a single project |
| * :github:`43834` - DHCP not work in ``Intel@PSE`` on ``Intel@EHL`` |
| * :github:`43830` - LPC55S69 Not flashing to second core. |
| * :github:`43829` - http_client: http_client_req() returns incorrect number of bytes sent |
| * :github:`43818` - lib: os: ring_buffer: recent changes cause UART shell to fail on qemu_cortex_a9 |
| * :github:`43816` - tests: cmsis_dsp: rf16 and cf16 tests are not executed on Native POSIX |
| * :github:`43807` - Test "cpp.libcxx.newlib.exception" failed on platforms which use zephyr.bin to run tests. |
| * :github:`43794` - BMI160 Driver: Waiting time between SPI activation and reading CHIP IP is too low |
| * :github:`43793` - Alllow callbacks to CDC_ACM events |
| * :github:`43792` - mimxrt1050_evk: failed to run tests/net/socket/tls and tests/subsys/jwt |
| * :github:`43786` - [Logging] log context redefined with XCC when use zephyr logging api with SOF |
| * :github:`43757` - it8xxx2_evb: k_busy_wait is not working accurately for ITE RISC-V |
| * :github:`43756` - drivers: gpio: pca95xx does not compile with CONFIG_GPIO_PCA95XX_INTERRUPT |
| * :github:`43750` - ADC Driver build is broken for STM32L412 |
| * :github:`43745` - Xtensa XCC Build spi_nor.c fail |
| * :github:`43742` - BT510 lis2dh sensor does not disconnect SAO pull-up resistor |
| * :github:`43739` - tests: dma: random failure on dma loopback suspend and resume case on twr_ke18f |
| * :github:`43732` - esp32: MQTT publisher sample stuck for both TLS and non-TLS sample. |
| * :github:`43728` - esp32 build error while applicaton in T2 topology |
| * :github:`43718` - Bluetooth: bt_conn: Unable to allocate buffer within timeout |
| * :github:`43715` - ESP32 UART devicetree binding design issue |
| * :github:`43713` - intel_adsp_cavs: tests are not running with twister |
| * :github:`43711` - samples: tfm: psa Some TFM/psa samples fail on nrf platforms |
| * :github:`43702` - samples/arch/smp/pktqueue not working on ESP32 |
| * :github:`43700` - mgmt/mcumgr: Strange Kconfig names for MCUMGR_GRP_ZEPHYR_BASIC log levels |
| * :github:`43699` - Bluetooth Mesh working with legacy and extended advertising simultaneously |
| * :github:`43693` - LE Audio: Rename enum bt_audio_pac_type |
| * :github:`43669` - LSM6DSL IMU driver - incorrect register definitions |
| * :github:`43663` - stm32f091 test tests/kernel/context/ test_kernel_cpu_idle fails |
| * :github:`43661` - Newlib math library not working with user mode threads |
| * :github:`43656` - samples:bluetoooth:direction_finding_connectionless_rx antenna switching not working with nRF5340 |
| * :github:`43654` - Nominate Mehmet Alperen Sener as Bluetooth Mesh Collaborator |
| * :github:`43649` - Best practice for "external libraries" and cmake |
| * :github:`43647` - Bluetooth: LE multirole: connection as central is not totally unreferenced on disconnection |
| * :github:`43640` - stm32f1: Convert ``choice GPIO_STM32_SWJ`` to dt |
| * :github:`43636` - Documentation incorrectly states that C++ new and delete operators are unsupported |
| * :github:`43630` - Zperf tcp download stalls with window size becoming 0 on Zephyr side |
| * :github:`43618` - Invalid thread indexes out of userspace generation |
| * :github:`43600` - tests: mec15xxevb_assy6853: most of the test cases failed |
| * :github:`43587` - arm: trustzone: Interrupts using FPU causes usage fault when ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS is disabled |
| * :github:`43580` - hl7800: tcp stack freezes on slow response from modem |
| * :github:`43573` - return const struct device \* for device_get_binding(const char \*name) |
| * :github:`43568` - ITE eSPI driver expecting OOB header also along with OOB data from app code - espi_it8xxx2_send_oob() & espi_it8xxx2_receive_oob |
| * :github:`43567` - Bluetooth: Controller: ISO data packet dropped on payload array wraparound |
| * :github:`43553` - Request to configure SPBTLE-1S of STEVAL-MKSBOX1V1 |
| * :github:`43552` - samples: bluetooth: direction_finding: Sample fails on nrf5340 |
| * :github:`43543` - RFC: API Change: Bluetooth: struct bt_auth_cb field removal |
| * :github:`43525` - Default network interface selection by up-state |
| * :github:`43518` - 'DT_N_S_soc_S_timers_40012c00_S_pwm' undeclared |
| * :github:`43513` - it8xxx2_evb: tests/kernel/sleep failed |
| * :github:`43512` - wifi: esp_at: sockets not cleaned up on close |
| * :github:`43511` - lvgl: upgrade to 8.2 build problem |
| * :github:`43505` - ``py`` command not found when using nanopb on windows |
| * :github:`43503` - Build Version detection not working when Zephyr Kernel is a Git Submodule |
| * :github:`43490` - net: sockets: userspace accept() crashes with NULL addr/addrlen pointer |
| * :github:`43487` - LE Audio: Broadcast audio sample |
| * :github:`43476` - tests: nrf: Output of nrf5340dk_nrf5340_cpuapp_ns not available |
| * :github:`43470` - wifi: esp_at: race condition on mutex's leading to deadlock |
| * :github:`43469` - USBD_CLASS_DESCR_DEFINE section name bug |
| * :github:`43465` - 'Malformed data' on bt_data_parse() for every ble adv packet on bbc_microbit |
| * :github:`43456` - winc1500 wifi driver fails to build |
| * :github:`43452` - Missing SPI SCK on STM32F103vctx |
| * :github:`43448` - Deadlock detection in ``bt_att_req_alloc`` ineffective when ``CONFIG_BT_RECV_IS_RX_THREAD=n`` |
| * :github:`43440` - Bluetooth: L2CAP send le data lack calling net_buf_unref() function |
| * :github:`43430` - Is there any plan to develop zephyr to mircrokenrel architecture? |
| * :github:`43425` - zephyr+Linux+hypervisor on Raspberry Pi 4 |
| * :github:`43419` - Pull request not updated after force push the original branch |
| * :github:`43411` - STM32 SPI DMA issue |
| * :github:`43409` - frdm_k64f: USB connection gets lost after continuous testing |
| * :github:`43400` - nrf board system_off sample application does not work on P1 buttons |
| * :github:`43392` - Bluetooth: ISO: unallocated memory written during mem_init |
| * :github:`43389` - LoRaWAN on Nordic and SX1276 & SX1262 Shield |
| * :github:`43382` - mgmt/mcumgr/lib: Echo OS command echoes back empty string witn no error when string is too long to handle |
| * :github:`43378` - TLS availability misdetection when ZEPHYR_TOOLCHAIN_VARIANT is not set |
| * :github:`43372` - pm: lptim: stm32h7: pending irq stops STANDBY |
| * :github:`43369` - Use Zephyr crc implementation for LittleFS |
| * :github:`43359` - Bluetooth: ASCS QoS config should not fail for preferred settings |
| * :github:`43348` - twister:skipped case num issue when use --only-failed. |
| * :github:`43345` - Bluetooth: Controller: Extended and Periodic Advertising Link Layer Component Test Coverage |
| * :github:`43344` - intel_adsp_cavs25: samples/subsys/logging/syst is failing with a timeout when the sample is enabled to run on intel_adsp_cavs25 |
| * :github:`43333` - RFC: Bring zcbor as CBOR decoder/encoder in replacement for TinyCBOR |
| * :github:`43326` - Unstable SD Card performance on Teensy 4.1 |
| * :github:`43319` - Hardware reset cause api sets reset pin bit everytime the api is called |
| * :github:`43316` - stm32wl55 cannot enable PLL source as MSI |
| * :github:`43314` - LE Audio: BAP ``sent`` callback missing |
| * :github:`43310` - disco_l475_iot1: BLE not working |
| * :github:`43306` - sam_e70b_xplained: the platform will be not normal after running test case tests/subsys/usb/desc_sections/ |
| * :github:`43305` - wifi: esp_at: shell command "wifi scan" not working well |
| * :github:`43295` - mimxrt685_evk_cm33: Hard fault with ``CONFIG_FLASH=y`` |
| * :github:`43292` - NXP RT11xx devicetree missing GPIO7, GPIO8, GPIO12 |
| * :github:`43285` - nRF5x System Off demo fails to put the nRF52840DK into system off |
| * :github:`43284` - samples: drivers: watchdog failed in mec15xxevb_assy6853 |
| * :github:`43277` - usb/dfu: upgrade request is not called while used from mcuboot, update doesn't happen |
| * :github:`43276` - tests: up_squared: testsuite tests/kernel/sched/deadline/ failed |
| * :github:`43271` - tests: acrn_ehl_crb: tests/arch/x86/info failed |
| * :github:`43268` - LE Audio: Add stream ops callbacks for unicast server |
| * :github:`43258` - HCI core data buffer overflow with ESP32-C3 in Peripheral HR sample |
| * :github:`43248` - Bluetooth: Mesh: Unable used with ext adv on native_posix |
| * :github:`43235` - STM32 platform does not handle large i2c_write() correctly |
| * :github:`43230` - Deprecate DT_CHOSEN_ZEPHYR_ENTROPY_LABEL |
| * :github:`43229` - nvs: change nvs_init to accept a device reference |
| * :github:`43218` - nucleo_wb55rg: Partition update required to use 0.13.0 BLE firmware |
| * :github:`43205` - UART console broken since 099850e916ad86e99b3af6821b8c9eb73ba91abf |
| * :github:`43203` - BLE: With BT_SETTINGS and BT_SMP, second connection blocks the system in connection event notification |
| * :github:`43192` - lvgl: upgrade LVGL to 8.1 build error |
| * :github:`43190` - Bluetooth: audio: HCI command timeout on LE Setup Isochronous Data Path |
| * :github:`43186` - Bluetooth: import nrf ble_db_discovery library to zephyr |
| * :github:`43172` - CONFIG_BT_MESH_ADV_EXT doesn't build without CONFIG_BT_MESH_RELAY |
| * :github:`43163` - Applications not pulling LVGL cannot be configured or compiled |
| * :github:`43159` - hal: stm32: ltdc pins should be very-high-speed |
| * :github:`43142` - Ethernet and PPP communication conflicts |
| * :github:`43136` - STM32 Uart log never take effect |
| * :github:`43132` - Thingy:52 i2c_nrfx_twim: Error 0x0BAE0001 occurred for message |
| * :github:`43131` - LPCXPresso55S69-evk dtsi file incorrect |
| * :github:`43130` - STM32WL ADC idles / doesn't work |
| * :github:`43117` - Not possible to create more than one shield. |
| * :github:`43109` - drivers:peci:xec: PECI Command 'Ping' does not work properly |
| * :github:`43099` - CMake: ARCH roots issue |
| * :github:`43095` - Inconsistent logging config result resulted from menuconfig. |
| * :github:`43094` - CMake stack overflow after changing the build/zephyr/.config, even just timestamp. |
| * :github:`43090` - mimxrt685_evk_cm33: USB examples not working on Zephyr v3.0.0 |
| * :github:`43087` - XCC build failures for all intel_adsp tests/platforms |
| * :github:`43081` - [Slack] Slack invite works only on very few mail addresses - this should be changed! |
| * :github:`43066` - stm32wl55 true RNG falls in seed error |
| * :github:`43058` - PACS: Fix PAC capabilities to be exposed in PAC Sink/Source characteristic |
| * :github:`43057` - twister: error while executing twister script on windows machine for sample example code |
| * :github:`43046` - Wifi sample not working with disco_l475_iot1 |
| * :github:`43034` - Documentation for ``console_putchar`` function is incorrect |
| * :github:`43024` - samples: tests task wdt fails on some stm32 nucleo target boards |
| * :github:`43020` - samples/subsys/fs/littlefs does not work with native_posix board on WSL2 |
| * :github:`43016` - Self inc/dec works incorrectly with logging API. |
| * :github:`42997` - Bluetooth: Controller: Receiving Periodic Advertising Reports with larger AD Data post v3.0.0-rc2 |
| * :github:`42988` - Specify and standardize undefined behavior on empty response from server for http_client |
| * :github:`42960` - Bluetooth: Audio: Codec config parsing and documentation |
| * :github:`42953` - it8xxx2_evb: Test in tests/kernel/timer/timer_api fail. |
| * :github:`42940` - Please add zsock_getpeername |
| * :github:`42928` - CSIS: Invalid usage of bt_conn_auth_cb callbacks |
| * :github:`42888` - Bluetooth: Controller: Extended Advertising - Advertising Privacy Support |
| * :github:`42881` - Arduino due missing 'arduino_i2c' alias. |
| * :github:`42877` - k_cycle_get_32 returns 0 on start-up on native_posix |
| * :github:`42874` - ehl_crb: samples/kernel/metairq_dispatch fails when it is run multiple times |
| * :github:`42870` - Build error due to minimal libc qsort callback cast |
| * :github:`42865` - openocd configurations missing for stm32mp157c_dk2 board |
| * :github:`42857` - sam_e70b_xplained: failed to run test cases tests/net/npf and tests/net/bridge |
| * :github:`42856` - Bluetooth: BAP: Unicast client sample cannot connect |
| * :github:`42854` - k_busy_wait() never returns when called - litex vexriscv soc and cpu on xilinx ac701 board |
| * :github:`42851` - it8xxx2_evb: Mutlitple tests in tests/kernel/contex fail. |
| * :github:`42850` - CONFIG items disappeared in zephyr-3.0-rc3 |
| * :github:`42848` - it8xxx2_evb: Test in /tests/subsys/cpp/libcxx fail. |
| * :github:`42847` - it8xxx2_evb: Multiple tests in tests/subsys/portability/cmsis_rtos_v2 fail. |
| * :github:`42831` - Do the atomic* functions require protection from optimization? |
| * :github:`42829` - GATT: bt_gatt_is_subscribed does not work as expected when called from bt_conn_cb->connected |
| * :github:`42825` - MQTT client disconnection (EAGAIN) on publish with big payload |
| * :github:`42817` - ADC on ST Nucleo H743ZI board with DMA |
| * :github:`42800` - gptp_mi neighbor_prop_delay is not included in sync_receipt_time calculation due cast from double to uint64_t |
| * :github:`42799` - gptp correction field in sync follow up message does not have correct endianness |
| * :github:`42774` - pinctrl-0 issue in device tree building |
| * :github:`42723` - tests: kernel.condvar: child thread is not running |
| * :github:`42702` - upsquared: drivers.counter.cmos.seconds_rate is failing with busted maximum bound when run multiple times |
| * :github:`42685` - Socket echo server sample code not working in Litex Vexriscv cpu (Xilinx AC701 board) |
| * :github:`42680` - Missing bt_conn_(un)ref for LE Audio and tests |
| * :github:`42599` - tests: kernel: mem_protect: mem_protect fails after reset on stm32wb55 nucleo |
| * :github:`42588` - lsm6dso |
| * :github:`42587` - LE Audio: BAP Unicast API use array of pointers instead of array of streams |
| * :github:`42559` - 6LoCAN samples fail due to null pointer dereference |
| * :github:`42548` - acrn_ehl_crb: twister failed to run tests/subsys/logging due to UnicodeEncodeError after switching to log v2 |
| * :github:`42544` - Bluetooth: controller: llcp: handling of remote procedures with and without instant |
| * :github:`42534` - BLE Testing functions do not work properly |
| * :github:`42530` - Possibility to define pinmux item for Pin Control as a plain input/output |
| * :github:`42524` - Wrong implementation of SPI driver |
| * :github:`42520` - bt_ots Doxygen documentation does not seem to be included in the Zephyr project documentation. |
| * :github:`42518` - Bluetooth Ext Adv:Sync: While simultaneous advertiser are working, and skip is non-zero, sync terminates repeatedly |
| * :github:`42508` - TWIHS hangs |
| * :github:`42496` - ARM M4 MPU backed userspace livelocks on stack overflow when FPU enabled |
| * :github:`42478` - Unable to build mcuboot for b_u585i_iot02a |
| * :github:`42453` - Unable to update Firmware using MCUBoot on STM32G0 series |
| * :github:`42436` - NXP eDMA overrun errors on SAI RX |
| * :github:`42434` - NXP I2S (SAI) driver bugs |
| * :github:`42432` - i2c: unable to configure SAMD51 i2c clock frequency for standard (100 KHz) speeds |
| * :github:`42425` - i2c: sam0 driver does not prevent simultaneous transactions |
| * :github:`42351` - stm32H743 nucleo board cannot flash after tests/drivers/flash |
| * :github:`42343` - LE Audio: PACS: Server change location |
| * :github:`42342` - LE Audio: PACS notify changes to locations |
| * :github:`42333` - Cannot write to qspi flash in adafruit feather nrf52840, device tree is wrong |
| * :github:`42310` - Support for TCA6408A gpio expander, which existing driver as a base? |
| * :github:`42306` - Bluetooth: Host: More than ``CONFIG_BT_EATT_MAX`` EATT channels may be created |
| * :github:`42290` - ESP32 - Heltec Wifi - Possibly invalid CONFIG_ESP32_XTAL_FREQ setting (40MHz). Detected 26 MHz |
| * :github:`42235` - SocketCAN not supported for NUCLEO H743ZI |
| * :github:`42227` - Teensy41 support SDHC - Storage init Error |
| * :github:`42189` - Sub 1GHz Support for CC1352 |
| * :github:`42181` - Ethernet PHY imxrt1060 Teensy not working, sample with DHCPv4_client fails |
| * :github:`42113` - Modbus RTU allow non-compliant client configuration |
| * :github:`42108` - upsquared: isr_dynamic & isr_regular test is failing |
| * :github:`42102` - doc: searches for sys_reboot() are inconsistent |
| * :github:`42096` - LE Audio: Media: Pass structs by reference and not value |
| * :github:`42090` - Bluetooth: Audio: MCS BSIM notification length warning |
| * :github:`42083` - Bluetooth: ISO: Packet Sequence Number should be incremented for each channel |
| * :github:`42081` - Direction finding code support for nrf52811? |
| * :github:`42072` - west: spdx: Blank FileChecksum field for missing build file |
| * :github:`42050` - printk bug: A function called from printk is invoked three times given certain configuration variables |
| * :github:`42015` - LED api can't be called from devicetree phandle |
| * :github:`42011` - Establish guidelines for TSC working groups |
| * :github:`42000` - BQ274xx driver not working correctly |
| * :github:`41995` - tracing: riscv: Missing invoking the sys_trace_isr_exit() |
| * :github:`41947` - lpcxpresso55s16 SPI hardware chip select not working |
| * :github:`41946` - Bluetooth: ISO: Sending on RX-only CIS doesn't report error |
| * :github:`41944` - Assertion triggered when system is going to PM_STATE_SOFT_OFF |
| * :github:`41931` - drivers: audio: tlv320dac310x: device config used as non-const |
| * :github:`41924` - drivers: dma/i2c: nios2: config used as non-const |
| * :github:`41921` - Fast USB DFU workflow |
| * :github:`41899` - ESP32 Wifi mDNS |
| * :github:`41874` - Recursive spinlock error on ARM in specific circumstances |
| * :github:`41864` - ESP32 Wifi AP Mode DHCP Service |
| * :github:`41823` - Bluetooth: Controller: llcp: Remote request are dropped due to lack of free proc_ctx |
| * :github:`41788` - Bluetooth: Controller: llcp: Refectored PHY Update procedure asserts while waiting for free buffers to send notifications |
| * :github:`41787` - Alignment issue on Cortex M7 |
| * :github:`41777` - periodic_adv periodic_sync lost data |
| * :github:`41773` - LoRaWAN: Unable to correctly join networks of any version on LTS |
| * :github:`41742` - stm32g0: stm32_temp: not working |
| * :github:`41710` - tests: ztest: ztress: Test randomly fails on qemu_cortex_a9 |
| * :github:`41677` - undefined reference to \`__device_dts_ord_xx' |
| * :github:`41667` - doc: arm: mec172x: MEC172x EVB documentation points to some inexistent jumpers |
| * :github:`41652` - Bluetooth: Controller: BIG: Channel map update BIG: Generation of BIG_CHANNEL_MAP_IND (sent 6 times) |
| * :github:`41651` - Bluetooth: Controller: BIG Sync: Channel map update of BIG |
| * :github:`41650` - STM32H7 SPI123 incorrect clock source used for prescaler calculation |
| * :github:`41642` - Deploy generated docs from PRs |
| * :github:`41628` - Move LVGL glue code to zephyr/modules/ |
| * :github:`41613` - Process: Review and update Milestone Definitions |
| * :github:`41597` - Unable to build mcuboot for BL654_DVK |
| * :github:`41596` - Split connected ISO client and server by Kconfig |
| * :github:`41594` - LE Audio: Upstream CCP/TBS |
| * :github:`41593` - LE Audio: Upstream BASS |
| * :github:`41592` - Object Transfer Service Client made "official" |
| * :github:`41590` - LE Audio: CAP API - Acceptor |
| * :github:`41517` - Hard fault if ``CONFIG_LOG2_MODE_DEFERRED`` is enabled |
| * :github:`41472` - Unable to mount fat file system on nucleo_f429zi |
| * :github:`41449` - PWM capture with STM32 |
| * :github:`41408` - Low power states for STM32 H7 |
| * :github:`41388` - tests: coverage: test code coverage report failed on mps2_an385 |
| * :github:`41382` - nordic nrf52/nrf53 and missing cpu-power-states (dts) for automatic device PM control |
| * :github:`41375` - hal_nordic: update 15.4 driver to newest version |
| * :github:`41297` - QSPI flash need read, write via 4 lines not 1 line |
| * :github:`41285` - pthread_once has incorrect behavior |
| * :github:`41230` - LE Audio: API Architecture and documentation for GAF |
| * :github:`41228` - LE Audio: Add a codec to Zephyr |
| * :github:`41220` - STM32H7: Check for VOSRDY instead of ACTVOSRDY |
| * :github:`41201` - LE Audio: Improved media_proxy internal data structure |
| * :github:`41200` - LE Audio: Other postponed MCS cleanups |
| * :github:`41196` - LE Audio: Reconfigure Unicast Group after creation |
| * :github:`41194` - LE Audio: Remove support for bidirectional audio streams |
| * :github:`41192` - LE Audio: Change PACS from indicate to notify |
| * :github:`41191` - LE Audio: Update pac_indicate to actually send data |
| * :github:`41188` - LE Audio: Remove stream (dis)connected callback from stream ops |
| * :github:`41186` - LE Audio: CAP API - Initiator |
| * :github:`41169` - twister: program get stuck when serial in hardware map is empty string |
| * :github:`41151` - RFC: Provide k_realloc() |
| * :github:`41093` - Kconfig.defconfig:11: error: couldn't parse 'default $(dt_node_int_prop_int,/cpus/cpu@0,clock-frequency)' |
| * :github:`40970` - Upgrade qemu to fix breakage in mps3-an547 |
| * :github:`40920` - Bluetooth audio: client/server naming scheme |
| * :github:`40901` - RFC: API Change: update LVGL from v7 to v8 |
| * :github:`40874` - mps2_an521_ns: fail to handle user_string_alloc_copy() with null parameter |
| * :github:`40856` - PPP: gsm_modem: LCP never gets past REQUEST_SENT phase |
| * :github:`40775` - stm32: multi-threading broken after #40173 |
| * :github:`40679` - libc/minimal: static variable of gmtime() does not located to z_libc_partition at usermode. |
| * :github:`40657` - Cannot enable secondary pwm out channels on stm32f3 |
| * :github:`40635` - gen_app_partitions.py may not include all object files produced by build system |
| * :github:`40620` - zephyr with cadence xtensa core dsp LX7 ，helloworld program cannot be entered after the program is executed |
| * :github:`40593` - tests: lib: cmsis_dsp: Overflows in libraries.cmsis_dsp.matrix |
| * :github:`40591` - RFC: Replace TinyCBOR with ZCBOR within Zephyr |
| * :github:`40588` - mgmg/mcumg/lib: Replace TinyCBOR with zcbor |
| * :github:`40559` - Move LittlefFS configuration header and CMakeLists.txt from module to zephyr/modules |
| * :github:`40371` - modem: uart interface does not disable TX interrupt in ISR |
| * :github:`40360` - Error messages with the sample: Asynchronous Socket Echo Server Using select() |
| * :github:`40306` - ESP32 BLE transmit error |
| * :github:`40298` - Bluetooth assertions in lll_conn.c |
| * :github:`40204` - Bluetooth: ll_sync_create_cancel fails with BT_HCI_ERR_CMD_DISALLOWED before BT_HCI_EVT_LE_PER_ADV_SYNC_ESTABLISHED is generated |
| * :github:`40195` - CONFIG_BOARD default value using cmake -DBOARD define value |
| * :github:`39948` - kernel.common.stack_sentinel fails on qemu_cortex_a9 |
| * :github:`39922` - Instruction fetch fault happens on RISC-V with XIP and userspace enabled |
| * :github:`39834` - [Coverity CID: 240669] Unrecoverable parse warning in subsys/jwt/jwt.c |
| * :github:`39738` - twister: tests: samples: Skips on integration_platforms in CI |
| * :github:`39520` - Add support for the BlueNRG-LP SoC |
| * :github:`39432` - Periodic adv. syncing takes longer and bt_le_per_adv_sync_delete returns error after commit ecf761b4e9 |
| * :github:`39314` - Invalid CONTROLLER_ID in usb_dc_mcux.c for LPC54114 |
| * :github:`39194` - Process: investigate GitHub code review replacements |
| * :github:`39184` - HawkBit hash mismatch |
| * :github:`39176` - overflow in sensor_value_from_double |
| * :github:`39132` - subsys/net/ip/tcp2: Missing feature to decrease Receive Window size sent in the ACK messge |
| * :github:`38978` - Esp32 compilation error after enabling CONFIG_NEWLIB_LIBC |
| * :github:`38966` - Please add STM32F412VX |
| * :github:`38747` - data/json: encoding issues with array in object_array |
| * :github:`38632` - Multiple potential dead-locks modem_socket_wait_data |
| * :github:`38570` - Process: binary blobs in Zephyr |
| * :github:`38567` - Process: legitimate signed-off-by lines |
| * :github:`38548` - stm32: QSPI flash driver concurrent access issue |
| * :github:`38305` - Update to LVGL v8 |
| * :github:`38279` - Bluetooth: Controller: assert LL_ASSERT(!radio_is_ready()) in lll_conn.c |
| * :github:`38268` - Multiple defects in "Multi Producer Single Consumer Packet Buffer" library |
| * :github:`38179` - twister: only report failures in merged junit output |
| * :github:`37798` - Change nRF5340DK board files to handle CPUNET pin configuration with DTS nodes |
| * :github:`37730` - http_client_req: Timeout likely not working as expected |
| * :github:`37710` - Bluetooth advert packet size is size of maximum packet not size of actual data |
| * :github:`37683` - STM32 Eth Tx DMA always uses first descriptor instead of going through circular buffer |
| * :github:`37324` - subsys/mgmt/hawkbit: Unable to finish download if CPU blocking function (i.e. ``flash_img_buffered_write``) is used |
| * :github:`37294` - RTT logs not found with default west debug invocation on jlink runner |
| * :github:`37191` - nrf5340: Support +3dBm TX power |
| * :github:`37186` - entropy: Bluetooth derived entropy device |
| * :github:`36905` - Improve (k\_)malloc and heap documentation |
| * :github:`36882` - MCUMGR: fs upload fail for first time file upload |
| * :github:`36645` - minimal libc: add strtoll and strtoull functions |
| * :github:`36571` - LoRa support for random DevNonce and NVS stack state storage |
| * :github:`36266` - kernel timeout_list NULL pointer access |
| * :github:`35316` - log_panic() hangs kernel |
| * :github:`34737` - Can't compile CIVETWEB with CONFIG_NO_OPTIMIZATIONS or CONFIG_DEBUG |
| * :github:`34590` - Functions getopt_long and getopt_long_only from the FreeBSD project |
| * :github:`34256` - Add support for FVP in CI / SDK |
| * :github:`34218` - Civetweb server crashing when trying to access invalid resource |
| * :github:`34204` - nvs_write: Bad documented return value. |
| * :github:`33876` - Lora sender sample build error for esp32 |
| * :github:`32885` - Zephyr C++ support documentation conflicts to the code |
| * :github:`31613` - Undefined reference errors when using External Library with k_msgq_* calls |
| * :github:`30724` - CAN J1939 Support |
| * :github:`30152` - Settings nvs subsystem uses a hardcoded flash area label |
| * :github:`29981` - Improve clock initialization on LPC & MXRT600 |
| * :github:`29941` - Unable to connect Leshan LwM2M server using x86 based LwM2M client |
| * :github:`29199` - github integration: ensure maintainers are added to PRs that affect them |
| * :github:`29107` - Bluetooth: hci-usb uses non-standard interfaces |
| * :github:`28009` - Add connection status to the connection info |
| * :github:`27841` - samples: disk: unable to access sd card |
| * :github:`27177` - Unable to build samples/bluetooth/st_ble_sensor for steval_fcu001v1 board |
| * :github:`26731` - Single channel selection - Bluetooth - Zephyr |
| * :github:`26038` - build zephyr with llvm fail |
| * :github:`25362` - better support for posix api read write in socketpair tests |
| * :github:`24733` - Misconfigured environment |
| * :github:`23347` - net: ieee802154_radio: API improvements |
| * :github:`22870` - Add Cortex-M4 testing platform |
| * :github:`22455` - How to assign USB endpoint address manually in stm32f4_disco for CDC ACM class driver |
| * :github:`22247` - Discussion: Supporting the Arduino ecosystem |
| * :github:`22161` - add shell command for the settings subsystem |
| * :github:`21994` - Bluetooth: controller: split: Fix procedure complete event generation |
| * :github:`21409` - sanitycheck: cmd.exe colorized output |
| * :github:`20269` - Add support for opamps in MCUs |
| * :github:`19979` - Implement Cortex-R floating-point support |
| * :github:`19244` - BLE throughput of DFU by Mcumgr is too slow |
| * :github:`17893` - dynamic threads don't work on x86 in some configurations |
| * :github:`17743` - cross compiling for RISCV32 fails as compiler flags are not supplied by board but must be in target.cmake |
| * :github:`17005` - Upstreamability of SiLabs RAIL support |
| * :github:`16406` - west: runners: Add --id and --chiperase options |
| * :github:`16205` - Add support to west to flash w/o a build, but given a binary |
| * :github:`15820` - mcumgr: taskstat show name & used size |
| * :github:`14649` - CI testing must be retry-free |
| * :github:`14591` - Infineon Tricore architecture support |
| * :github:`13318` - k_thread_foreach api breaks real time semantics |
| * :github:`9578` - Windows installation of SDK needs 'just works' installer |
| * :github:`8536` - imxrt1050: Replace systick with gpt or other system timer |
| * :github:`8481` - Remove the Kconfig helper options for nRF ICs once DT can replace them |
| * :github:`8139` - Driver for BMA400 accelerometer |
| * :github:`6654` - efm32wg_stk3800 bluetooth sample do not compile (add support) |
| * :github:`6162` - LwM2M: Support Queue Mode Operation |
| * :github:`1495` - esp32: newlibc errors |
| * :github:`1392` - No module named 'elftools' |
| * :github:`3192` - Shutting down BLE support |
| * :github:`3150` - Si1153 Ambient Light Sensor, Proximity, and Gesture detector support |
