| /* |
| * Copyright (c) 2017 Jan Van Winkel <jan.van_winkel@dxplore.eu> |
| * Copyright (c) 2019 Nordic Semiconductor ASA |
| * Copyright (c) 2019 Marc Reilly |
| * Copyright (c) 2019 PHYTEC Messtechnik GmbH |
| * Copyright (c) 2020 Endian Technologies AB |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT sitronix_st7789v |
| |
| #include "display_st7789v.h" |
| |
| #include <zephyr/device.h> |
| #include <zephyr/drivers/spi.h> |
| #include <zephyr/drivers/gpio.h> |
| #include <zephyr/pm/device.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <zephyr/drivers/display.h> |
| |
| #define LOG_LEVEL CONFIG_DISPLAY_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(display_st7789v); |
| |
| struct st7789v_config { |
| struct spi_dt_spec bus; |
| struct gpio_dt_spec cmd_data_gpio; |
| struct gpio_dt_spec reset_gpio; |
| uint8_t vcom; |
| uint8_t gctrl; |
| bool vdv_vrh_enable; |
| uint8_t vrh_value; |
| uint8_t vdv_value; |
| uint8_t mdac; |
| uint8_t gamma; |
| uint8_t colmod; |
| uint8_t lcm; |
| uint8_t porch_param[5]; |
| uint8_t cmd2en_param[4]; |
| uint8_t pwctrl1_param[2]; |
| uint8_t pvgam_param[14]; |
| uint8_t nvgam_param[14]; |
| uint8_t ram_param[2]; |
| uint8_t rgb_param[3]; |
| uint16_t height; |
| uint16_t width; |
| }; |
| |
| struct st7789v_data { |
| uint16_t x_offset; |
| uint16_t y_offset; |
| }; |
| |
| #ifdef CONFIG_ST7789V_RGB565 |
| #define ST7789V_PIXEL_SIZE 2u |
| #else |
| #define ST7789V_PIXEL_SIZE 3u |
| #endif |
| |
| static void st7789v_set_lcd_margins(const struct device *dev, |
| uint16_t x_offset, uint16_t y_offset) |
| { |
| struct st7789v_data *data = dev->data; |
| |
| data->x_offset = x_offset; |
| data->y_offset = y_offset; |
| } |
| |
| static void st7789v_set_cmd(const struct device *dev, int is_cmd) |
| { |
| const struct st7789v_config *config = dev->config; |
| |
| gpio_pin_set_dt(&config->cmd_data_gpio, is_cmd); |
| } |
| |
| static void st7789v_transmit(const struct device *dev, uint8_t cmd, |
| uint8_t *tx_data, size_t tx_count) |
| { |
| const struct st7789v_config *config = dev->config; |
| |
| struct spi_buf tx_buf = { .buf = &cmd, .len = 1 }; |
| struct spi_buf_set tx_bufs = { .buffers = &tx_buf, .count = 1 }; |
| |
| st7789v_set_cmd(dev, 1); |
| spi_write_dt(&config->bus, &tx_bufs); |
| |
| if (tx_data != NULL) { |
| tx_buf.buf = tx_data; |
| tx_buf.len = tx_count; |
| st7789v_set_cmd(dev, 0); |
| spi_write_dt(&config->bus, &tx_bufs); |
| } |
| } |
| |
| static void st7789v_exit_sleep(const struct device *dev) |
| { |
| st7789v_transmit(dev, ST7789V_CMD_SLEEP_OUT, NULL, 0); |
| k_sleep(K_MSEC(120)); |
| } |
| |
| static void st7789v_reset_display(const struct device *dev) |
| { |
| LOG_DBG("Resetting display"); |
| |
| const struct st7789v_config *config = dev->config; |
| if (config->reset_gpio.port != NULL) { |
| k_sleep(K_MSEC(1)); |
| gpio_pin_set_dt(&config->reset_gpio, 1); |
| k_sleep(K_MSEC(6)); |
| gpio_pin_set_dt(&config->reset_gpio, 0); |
| k_sleep(K_MSEC(20)); |
| } else { |
| st7789v_transmit(dev, ST7789V_CMD_SW_RESET, NULL, 0); |
| k_sleep(K_MSEC(5)); |
| } |
| } |
| |
| static int st7789v_blanking_on(const struct device *dev) |
| { |
| st7789v_transmit(dev, ST7789V_CMD_DISP_OFF, NULL, 0); |
| return 0; |
| } |
| |
| static int st7789v_blanking_off(const struct device *dev) |
| { |
| st7789v_transmit(dev, ST7789V_CMD_DISP_ON, NULL, 0); |
| return 0; |
| } |
| |
| static int st7789v_read(const struct device *dev, |
| const uint16_t x, |
| const uint16_t y, |
| const struct display_buffer_descriptor *desc, |
| void *buf) |
| { |
| return -ENOTSUP; |
| } |
| |
| static void st7789v_set_mem_area(const struct device *dev, const uint16_t x, |
| const uint16_t y, const uint16_t w, const uint16_t h) |
| { |
| struct st7789v_data *data = dev->data; |
| uint16_t spi_data[2]; |
| |
| uint16_t ram_x = x + data->x_offset; |
| uint16_t ram_y = y + data->y_offset; |
| |
| spi_data[0] = sys_cpu_to_be16(ram_x); |
| spi_data[1] = sys_cpu_to_be16(ram_x + w - 1); |
| st7789v_transmit(dev, ST7789V_CMD_CASET, (uint8_t *)&spi_data[0], 4); |
| |
| spi_data[0] = sys_cpu_to_be16(ram_y); |
| spi_data[1] = sys_cpu_to_be16(ram_y + h - 1); |
| st7789v_transmit(dev, ST7789V_CMD_RASET, (uint8_t *)&spi_data[0], 4); |
| } |
| |
| static int st7789v_write(const struct device *dev, |
| const uint16_t x, |
| const uint16_t y, |
| const struct display_buffer_descriptor *desc, |
| const void *buf) |
| { |
| const struct st7789v_config *config = dev->config; |
| const uint8_t *write_data_start = (uint8_t *) buf; |
| struct spi_buf tx_buf; |
| struct spi_buf_set tx_bufs; |
| uint16_t write_cnt; |
| uint16_t nbr_of_writes; |
| uint16_t write_h; |
| |
| __ASSERT(desc->width <= desc->pitch, "Pitch is smaller then width"); |
| __ASSERT((desc->pitch * ST7789V_PIXEL_SIZE * desc->height) <= desc->buf_size, |
| "Input buffer to small"); |
| |
| LOG_DBG("Writing %dx%d (w,h) @ %dx%d (x,y)", |
| desc->width, desc->height, x, y); |
| st7789v_set_mem_area(dev, x, y, desc->width, desc->height); |
| |
| if (desc->pitch > desc->width) { |
| write_h = 1U; |
| nbr_of_writes = desc->height; |
| } else { |
| write_h = desc->height; |
| nbr_of_writes = 1U; |
| } |
| |
| st7789v_transmit(dev, ST7789V_CMD_RAMWR, |
| (void *) write_data_start, |
| desc->width * ST7789V_PIXEL_SIZE * write_h); |
| |
| tx_bufs.buffers = &tx_buf; |
| tx_bufs.count = 1; |
| |
| write_data_start += (desc->pitch * ST7789V_PIXEL_SIZE); |
| for (write_cnt = 1U; write_cnt < nbr_of_writes; ++write_cnt) { |
| tx_buf.buf = (void *)write_data_start; |
| tx_buf.len = desc->width * ST7789V_PIXEL_SIZE * write_h; |
| spi_write_dt(&config->bus, &tx_bufs); |
| write_data_start += (desc->pitch * ST7789V_PIXEL_SIZE); |
| } |
| |
| return 0; |
| } |
| |
| static void *st7789v_get_framebuffer(const struct device *dev) |
| { |
| return NULL; |
| } |
| |
| static int st7789v_set_brightness(const struct device *dev, |
| const uint8_t brightness) |
| { |
| return -ENOTSUP; |
| } |
| |
| static int st7789v_set_contrast(const struct device *dev, |
| const uint8_t contrast) |
| { |
| return -ENOTSUP; |
| } |
| |
| static void st7789v_get_capabilities(const struct device *dev, |
| struct display_capabilities *capabilities) |
| { |
| const struct st7789v_config *config = dev->config; |
| |
| memset(capabilities, 0, sizeof(struct display_capabilities)); |
| capabilities->x_resolution = config->width; |
| capabilities->y_resolution = config->height; |
| |
| #ifdef CONFIG_ST7789V_RGB565 |
| capabilities->supported_pixel_formats = PIXEL_FORMAT_RGB_565; |
| capabilities->current_pixel_format = PIXEL_FORMAT_RGB_565; |
| #else |
| capabilities->supported_pixel_formats = PIXEL_FORMAT_RGB_888; |
| capabilities->current_pixel_format = PIXEL_FORMAT_RGB_888; |
| #endif |
| capabilities->current_orientation = DISPLAY_ORIENTATION_NORMAL; |
| } |
| |
| static int st7789v_set_pixel_format(const struct device *dev, |
| const enum display_pixel_format pixel_format) |
| { |
| #ifdef CONFIG_ST7789V_RGB565 |
| if (pixel_format == PIXEL_FORMAT_RGB_565) { |
| #else |
| if (pixel_format == PIXEL_FORMAT_RGB_888) { |
| #endif |
| return 0; |
| } |
| LOG_ERR("Pixel format change not implemented"); |
| return -ENOTSUP; |
| } |
| |
| static int st7789v_set_orientation(const struct device *dev, |
| const enum display_orientation orientation) |
| { |
| if (orientation == DISPLAY_ORIENTATION_NORMAL) { |
| return 0; |
| } |
| LOG_ERR("Changing display orientation not implemented"); |
| return -ENOTSUP; |
| } |
| |
| static void st7789v_lcd_init(const struct device *dev) |
| { |
| struct st7789v_data *data = dev->data; |
| const struct st7789v_config *config = dev->config; |
| uint8_t tmp; |
| |
| st7789v_set_lcd_margins(dev, data->x_offset, |
| data->y_offset); |
| |
| st7789v_transmit(dev, ST7789V_CMD_CMD2EN, |
| (uint8_t *)config->cmd2en_param, |
| sizeof(config->cmd2en_param)); |
| |
| st7789v_transmit(dev, ST7789V_CMD_PORCTRL, |
| (uint8_t *)config->porch_param, |
| sizeof(config->porch_param)); |
| |
| /* Digital Gamma Enable, default disabled */ |
| tmp = 0x00; |
| st7789v_transmit(dev, ST7789V_CMD_DGMEN, &tmp, 1); |
| |
| /* Frame Rate Control in Normal Mode, default value */ |
| tmp = 0x0f; |
| st7789v_transmit(dev, ST7789V_CMD_FRCTRL2, &tmp, 1); |
| |
| tmp = config->gctrl; |
| st7789v_transmit(dev, ST7789V_CMD_GCTRL, &tmp, 1); |
| |
| tmp = config->vcom; |
| st7789v_transmit(dev, ST7789V_CMD_VCOMS, &tmp, 1); |
| |
| if (config->vdv_vrh_enable) { |
| tmp = 0x01; |
| st7789v_transmit(dev, ST7789V_CMD_VDVVRHEN, &tmp, 1); |
| |
| tmp = config->vrh_value; |
| st7789v_transmit(dev, ST7789V_CMD_VRH, &tmp, 1); |
| |
| tmp = config->vdv_value; |
| st7789v_transmit(dev, ST7789V_CMD_VDS, &tmp, 1); |
| } |
| |
| st7789v_transmit(dev, ST7789V_CMD_PWCTRL1, |
| (uint8_t *)config->pwctrl1_param, |
| sizeof(config->pwctrl1_param)); |
| |
| /* Memory Data Access Control */ |
| tmp = config->mdac; |
| st7789v_transmit(dev, ST7789V_CMD_MADCTL, &tmp, 1); |
| |
| /* Interface Pixel Format */ |
| tmp = config->colmod; |
| st7789v_transmit(dev, ST7789V_CMD_COLMOD, &tmp, 1); |
| |
| tmp = config->lcm; |
| st7789v_transmit(dev, ST7789V_CMD_LCMCTRL, &tmp, 1); |
| |
| tmp = config->gamma; |
| st7789v_transmit(dev, ST7789V_CMD_GAMSET, &tmp, 1); |
| |
| st7789v_transmit(dev, ST7789V_CMD_INV_ON, NULL, 0); |
| |
| st7789v_transmit(dev, ST7789V_CMD_PVGAMCTRL, |
| (uint8_t *)config->pvgam_param, |
| sizeof(config->pvgam_param)); |
| |
| st7789v_transmit(dev, ST7789V_CMD_NVGAMCTRL, |
| (uint8_t *)config->nvgam_param, |
| sizeof(config->nvgam_param)); |
| |
| st7789v_transmit(dev, ST7789V_CMD_RAMCTRL, |
| (uint8_t *)config->ram_param, |
| sizeof(config->ram_param)); |
| |
| st7789v_transmit(dev, ST7789V_CMD_RGBCTRL, |
| (uint8_t *)config->rgb_param, |
| sizeof(config->rgb_param)); |
| } |
| |
| static int st7789v_init(const struct device *dev) |
| { |
| const struct st7789v_config *config = dev->config; |
| |
| if (!spi_is_ready(&config->bus)) { |
| LOG_ERR("SPI device not ready"); |
| return -ENODEV; |
| } |
| |
| if (config->reset_gpio.port != NULL) { |
| if (!device_is_ready(config->reset_gpio.port)) { |
| LOG_ERR("Reset GPIO device not ready"); |
| return -ENODEV; |
| } |
| |
| if (gpio_pin_configure_dt(&config->reset_gpio, GPIO_OUTPUT_INACTIVE)) { |
| LOG_ERR("Couldn't configure reset pin"); |
| return -EIO; |
| } |
| } |
| |
| if (!device_is_ready(config->cmd_data_gpio.port)) { |
| LOG_ERR("Reset GPIO device not ready"); |
| return -ENODEV; |
| } |
| |
| if (gpio_pin_configure_dt(&config->cmd_data_gpio, GPIO_OUTPUT)) { |
| LOG_ERR("Couldn't configure cmd/DATA pin"); |
| return -EIO; |
| } |
| |
| st7789v_reset_display(dev); |
| |
| st7789v_blanking_on(dev); |
| |
| st7789v_lcd_init(dev); |
| |
| st7789v_exit_sleep(dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_DEVICE |
| static int st7789v_pm_action(const struct device *dev, |
| enum pm_device_action action) |
| { |
| int ret = 0; |
| |
| switch (action) { |
| case PM_DEVICE_ACTION_RESUME: |
| st7789v_exit_sleep(dev); |
| break; |
| case PM_DEVICE_ACTION_SUSPEND: |
| st7789v_transmit(dev, ST7789V_CMD_SLEEP_IN, NULL, 0); |
| break; |
| default: |
| ret = -ENOTSUP; |
| break; |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_PM_DEVICE */ |
| |
| static const struct display_driver_api st7789v_api = { |
| .blanking_on = st7789v_blanking_on, |
| .blanking_off = st7789v_blanking_off, |
| .write = st7789v_write, |
| .read = st7789v_read, |
| .get_framebuffer = st7789v_get_framebuffer, |
| .set_brightness = st7789v_set_brightness, |
| .set_contrast = st7789v_set_contrast, |
| .get_capabilities = st7789v_get_capabilities, |
| .set_pixel_format = st7789v_set_pixel_format, |
| .set_orientation = st7789v_set_orientation, |
| }; |
| |
| #define ST7789V_INIT(inst) \ |
| static const struct st7789v_config st7789v_config_ ## inst = { \ |
| .bus = SPI_DT_SPEC_INST_GET(inst, SPI_OP_MODE_MASTER | \ |
| SPI_WORD_SET(8), 0), \ |
| .cmd_data_gpio = GPIO_DT_SPEC_INST_GET(inst, cmd_data_gpios), \ |
| .reset_gpio = GPIO_DT_SPEC_INST_GET_OR(inst, reset_gpios, {}), \ |
| .vcom = DT_INST_PROP(inst, vcom), \ |
| .gctrl = DT_INST_PROP(inst, gctrl), \ |
| .vdv_vrh_enable = (DT_INST_NODE_HAS_PROP(inst, vrhs) \ |
| && DT_INST_NODE_HAS_PROP(inst, vdvs)), \ |
| .vrh_value = DT_INST_PROP_OR(inst, vrhs, 0), \ |
| .vdv_value = DT_INST_PROP_OR(inst, vdvs, 0), \ |
| .mdac = DT_INST_PROP(inst, mdac), \ |
| .gamma = DT_INST_PROP(inst, gamma), \ |
| .colmod = DT_INST_PROP(inst, colmod), \ |
| .lcm = DT_INST_PROP(inst, lcm), \ |
| .porch_param = DT_INST_PROP(inst, porch_param), \ |
| .cmd2en_param = DT_INST_PROP(inst, cmd2en_param), \ |
| .pwctrl1_param = DT_INST_PROP(inst, pwctrl1_param), \ |
| .pvgam_param = DT_INST_PROP(inst, pvgam_param), \ |
| .nvgam_param = DT_INST_PROP(inst, nvgam_param), \ |
| .ram_param = DT_INST_PROP(inst, ram_param), \ |
| .rgb_param = DT_INST_PROP(inst, rgb_param), \ |
| .width = DT_INST_PROP(inst, width), \ |
| .height = DT_INST_PROP(inst, height), \ |
| }; \ |
| \ |
| static struct st7789v_data st7789v_data_ ## inst = { \ |
| .x_offset = DT_INST_PROP(inst, x_offset), \ |
| .y_offset = DT_INST_PROP(inst, y_offset), \ |
| }; \ |
| \ |
| PM_DEVICE_DT_INST_DEFINE(inst, st7789v_pm_action); \ |
| \ |
| DEVICE_DT_INST_DEFINE(inst, &st7789v_init, PM_DEVICE_DT_INST_GET(inst), \ |
| &st7789v_data_ ## inst, &st7789v_config_ ## inst, \ |
| POST_KERNEL, CONFIG_DISPLAY_INIT_PRIORITY, \ |
| &st7789v_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(ST7789V_INIT) |