| # Sensor configuration options |
| |
| # Copyright (c) 2016 Intel Corporation |
| # Copyright (c) 2024 Croxel Inc |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig SENSOR |
| bool "Sensor drivers" |
| help |
| Include sensor drivers in system config |
| |
| if SENSOR |
| |
| module = SENSOR |
| module-str = sensor |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| config SENSOR_INIT_PRIORITY |
| int "Sensor init priority" |
| default 90 |
| help |
| Sensor initialization priority. |
| |
| config SENSOR_ASYNC_API |
| bool "Async Sensor API" |
| select RTIO |
| select RTIO_SYS_MEM_BLOCKS |
| select RTIO_CONSUME_SEM |
| select RTIO_WORKQ |
| help |
| Enables the asynchronous sensor API by leveraging the RTIO subsystem. |
| |
| config SENSOR_SHELL |
| bool "Sensor shell" |
| depends on SHELL |
| select CBPRINTF_FP_SUPPORT |
| select SENSOR_ASYNC_API |
| help |
| This shell provides access to basic sensor data. |
| |
| config SENSOR_SHELL_STREAM |
| bool "Sensor shell 'stream' command" |
| depends on SENSOR_SHELL |
| help |
| Add the 'stream' subcommand to the sensor shell. When run on drivers that |
| support streaming (usually hardware FIFO backed), the shell will continue |
| to print new values as they come until the stream is closed. |
| |
| config SENSOR_SHELL_THREAD_STACK_SIZE |
| int "Stack size for the sensor shell data processing thread" |
| depends on SENSOR_SHELL_STREAM |
| default 1024 |
| help |
| The sensor shell uses a dedicated thread to process data coming from the |
| sensors in either one-shot or streaming mode. Use this config to control |
| the size of that thread's stack. |
| |
| config SENSOR_SHELL_BATTERY |
| bool "Sensor shell 'battery' command" |
| depends on SHELL |
| help |
| This enables the 'battery' command which reports charging information |
| in a convenient format. It makes use of a fuel gauge to read its |
| information. |
| |
| config SENSOR_SHELL_TRIG_PRINT_TIMEOUT_MS |
| int "Timeout for printing the average sensor sample value" |
| default 5000 |
| depends on SENSOR_SHELL |
| help |
| Control the frequency of the sampling window over which the sensor |
| interrupt handler will collect data. |
| |
| config SENSOR_SHELL_MAX_TRIGGER_DEVICES |
| int "Maximum number of sensor devices that can have enabled triggers in shell" |
| default 1 |
| depends on SENSOR_SHELL |
| help |
| Maximum number of sensor devices that the shell cmd can have |
| enabled triggers for. |
| |
| config SENSOR_INFO |
| bool "Sensor Info iterable section" |
| |
| comment "Device Drivers" |
| |
| # zephyr-keep-sorted-start |
| source "drivers/sensor/adi/Kconfig" |
| source "drivers/sensor/ams/Kconfig" |
| source "drivers/sensor/aosong/Kconfig" |
| source "drivers/sensor/asahi_kasei/Kconfig" |
| source "drivers/sensor/bosch/Kconfig" |
| source "drivers/sensor/espressif/Kconfig" |
| source "drivers/sensor/honeywell/Kconfig" |
| source "drivers/sensor/infineon/Kconfig" |
| source "drivers/sensor/ite/Kconfig" |
| source "drivers/sensor/jedec/Kconfig" |
| source "drivers/sensor/maxim/Kconfig" |
| source "drivers/sensor/meas/Kconfig" |
| source "drivers/sensor/memsic/Kconfig" |
| source "drivers/sensor/microchip/Kconfig" |
| source "drivers/sensor/nordic/Kconfig" |
| source "drivers/sensor/nuvoton/Kconfig" |
| source "drivers/sensor/nxp/Kconfig" |
| source "drivers/sensor/renesas/Kconfig" |
| source "drivers/sensor/rohm/Kconfig" |
| source "drivers/sensor/seeed/Kconfig" |
| source "drivers/sensor/sensirion/Kconfig" |
| source "drivers/sensor/silabs/Kconfig" |
| source "drivers/sensor/st/Kconfig" |
| source "drivers/sensor/tdk/Kconfig" |
| source "drivers/sensor/ti/Kconfig" |
| source "drivers/sensor/vishay/Kconfig" |
| source "drivers/sensor/wsen/Kconfig" |
| # zephyr-keep-sorted-stop |
| |
| source "drivers/sensor/a01nyub/Kconfig" |
| source "drivers/sensor/amd_sb_tsi/Kconfig" |
| source "drivers/sensor/amg88xx/Kconfig" |
| source "drivers/sensor/apds9253/Kconfig" |
| source "drivers/sensor/apds9960/Kconfig" |
| source "drivers/sensor/apds9306/Kconfig" |
| source "drivers/sensor/current_amp/Kconfig" |
| source "drivers/sensor/ens160/Kconfig" |
| source "drivers/sensor/explorir_m/Kconfig" |
| source "drivers/sensor/f75303/Kconfig" |
| source "drivers/sensor/fcx_mldx5/Kconfig" |
| source "drivers/sensor/grow_r502a/Kconfig" |
| source "drivers/sensor/hc_sr04/Kconfig" |
| source "drivers/sensor/hp206c/Kconfig" |
| source "drivers/sensor/ist8310/Kconfig" |
| source "drivers/sensor/lm35/Kconfig" |
| source "drivers/sensor/lm75/Kconfig" |
| source "drivers/sensor/lm77/Kconfig" |
| source "drivers/sensor/ltrf216a/Kconfig" |
| source "drivers/sensor/mhz19b/Kconfig" |
| source "drivers/sensor/nct75/Kconfig" |
| source "drivers/sensor/ntc_thermistor/Kconfig" |
| source "drivers/sensor/pms7003/Kconfig" |
| source "drivers/sensor/qdec_sam/Kconfig" |
| source "drivers/sensor/rpi_pico_temp/Kconfig" |
| source "drivers/sensor/s11059/Kconfig" |
| source "drivers/sensor/sbs_gauge/Kconfig" |
| source "drivers/sensor/sx9500/Kconfig" |
| source "drivers/sensor/th02/Kconfig" |
| source "drivers/sensor/tsic_xx6/Kconfig" |
| source "drivers/sensor/veaa_x_3/Kconfig" |
| source "drivers/sensor/voltage_divider/Kconfig" |
| source "drivers/sensor/ene_tach_kb1200/Kconfig" |
| |
| endif # SENSOR |
