| /* |
| * Copyright (c) 2022 Libre Solar Technologies GmbH |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT espressif_esp32_usb_serial |
| |
| #include <hal/usb_serial_jtag_ll.h> |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/device.h> |
| #include <errno.h> |
| #include <soc.h> |
| #include <zephyr/drivers/uart.h> |
| #include <zephyr/drivers/interrupt_controller/intc_esp32c3.h> |
| #include <zephyr/drivers/clock_control.h> |
| #include <zephyr/sys/util.h> |
| #include <esp_attr.h> |
| |
| #define USBSERIAL_TIMEOUT_MAX_US 50000 |
| |
| static int s_usbserial_timeout; |
| |
| struct serial_esp32_usb_config { |
| const struct device *clock_dev; |
| const clock_control_subsys_t clock_subsys; |
| int irq_source; |
| }; |
| |
| struct serial_esp32_usb_data { |
| #ifdef CONFIG_UART_INTERRUPT_DRIVEN |
| uart_irq_callback_user_data_t irq_cb; |
| void *irq_cb_data; |
| #endif |
| int irq_line; |
| }; |
| |
| #ifdef CONFIG_UART_INTERRUPT_DRIVEN |
| static void serial_esp32_usb_isr(void *arg); |
| #endif |
| |
| static int serial_esp32_usb_poll_in(const struct device *dev, unsigned char *p_char) |
| { |
| struct serial_esp32_usb_data *data = dev->data; |
| |
| if (!usb_serial_jtag_ll_rxfifo_data_available()) { |
| return -1; |
| } |
| |
| usb_serial_jtag_ll_read_rxfifo(p_char, 1); |
| |
| return 0; |
| } |
| |
| static void serial_esp32_usb_poll_out(const struct device *dev, unsigned char c) |
| { |
| ARG_UNUSED(dev); |
| |
| /* Wait for space in FIFO */ |
| while (!usb_serial_jtag_ll_txfifo_writable() && |
| s_usbserial_timeout < (USBSERIAL_TIMEOUT_MAX_US / 100)) { |
| k_usleep(100); |
| s_usbserial_timeout++; |
| } |
| |
| if (usb_serial_jtag_ll_txfifo_writable()) { |
| usb_serial_jtag_ll_write_txfifo(&c, 1); |
| usb_serial_jtag_ll_txfifo_flush(); |
| s_usbserial_timeout = 0; |
| } |
| } |
| |
| static int serial_esp32_usb_err_check(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return 0; |
| } |
| |
| static int serial_esp32_usb_init(const struct device *dev) |
| { |
| const struct serial_esp32_usb_config *config = dev->config; |
| struct serial_esp32_usb_data *data = dev->data; |
| |
| if (!device_is_ready(config->clock_dev)) { |
| return -ENODEV; |
| } |
| |
| int ret = clock_control_on(config->clock_dev, config->clock_subsys); |
| |
| #ifdef CONFIG_UART_INTERRUPT_DRIVEN |
| data->irq_line = esp_intr_alloc(config->irq_source, 0, (isr_handler_t)serial_esp32_usb_isr, |
| (void *)dev, NULL); |
| #endif |
| return ret; |
| } |
| |
| #ifdef CONFIG_UART_INTERRUPT_DRIVEN |
| |
| static int serial_esp32_usb_fifo_fill(const struct device *dev, const uint8_t *tx_data, int len) |
| { |
| ARG_UNUSED(dev); |
| |
| int ret = usb_serial_jtag_ll_write_txfifo(tx_data, len); |
| |
| usb_serial_jtag_ll_txfifo_flush(); |
| |
| return ret; |
| } |
| |
| static int serial_esp32_usb_fifo_read(const struct device *dev, uint8_t *rx_data, const int len) |
| { |
| ARG_UNUSED(dev); |
| |
| return usb_serial_jtag_ll_read_rxfifo(rx_data, len); |
| } |
| |
| static void serial_esp32_usb_irq_tx_enable(const struct device *dev) |
| { |
| struct serial_esp32_usb_data *data = dev->data; |
| |
| usb_serial_jtag_ll_clr_intsts_mask(USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY); |
| usb_serial_jtag_ll_ena_intr_mask(USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY); |
| |
| if (data->irq_cb != NULL) { |
| data->irq_cb(dev, data->irq_cb_data); |
| } |
| } |
| |
| static void serial_esp32_usb_irq_tx_disable(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| usb_serial_jtag_ll_disable_intr_mask(USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY); |
| } |
| |
| static int serial_esp32_usb_irq_tx_ready(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return (usb_serial_jtag_ll_txfifo_writable() && |
| usb_serial_jtag_ll_get_intr_ena_status() & USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY); |
| } |
| |
| static void serial_esp32_usb_irq_rx_enable(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| usb_serial_jtag_ll_clr_intsts_mask(USB_SERIAL_JTAG_INTR_SERIAL_OUT_RECV_PKT); |
| usb_serial_jtag_ll_ena_intr_mask(USB_SERIAL_JTAG_INTR_SERIAL_OUT_RECV_PKT); |
| } |
| |
| static void serial_esp32_usb_irq_rx_disable(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| usb_serial_jtag_ll_disable_intr_mask(USB_SERIAL_JTAG_INTR_SERIAL_OUT_RECV_PKT); |
| } |
| |
| static int serial_esp32_usb_irq_tx_complete(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return usb_serial_jtag_ll_txfifo_writable(); |
| } |
| |
| static int serial_esp32_usb_irq_rx_ready(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return usb_serial_jtag_ll_rxfifo_data_available(); |
| } |
| |
| static void serial_esp32_usb_irq_err_enable(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| } |
| |
| static void serial_esp32_usb_irq_err_disable(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| } |
| |
| static int serial_esp32_usb_irq_is_pending(const struct device *dev) |
| { |
| return serial_esp32_usb_irq_rx_ready(dev) || serial_esp32_usb_irq_tx_ready(dev); |
| } |
| |
| static int serial_esp32_usb_irq_update(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| usb_serial_jtag_ll_clr_intsts_mask(USB_SERIAL_JTAG_INTR_SERIAL_OUT_RECV_PKT); |
| usb_serial_jtag_ll_clr_intsts_mask(USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY); |
| |
| return 1; |
| } |
| |
| static void serial_esp32_usb_irq_callback_set(const struct device *dev, |
| uart_irq_callback_user_data_t cb, void *cb_data) |
| { |
| struct serial_esp32_usb_data *data = dev->data; |
| |
| data->irq_cb = cb; |
| data->irq_cb_data = cb_data; |
| } |
| |
| static void serial_esp32_usb_isr(void *arg) |
| { |
| const struct device *dev = (const struct device *)arg; |
| struct serial_esp32_usb_data *data = dev->data; |
| uint32_t uart_intr_status = usb_serial_jtag_ll_get_intsts_mask(); |
| |
| if (uart_intr_status == 0) { |
| return; |
| } |
| usb_serial_jtag_ll_clr_intsts_mask(uart_intr_status); |
| |
| if (data->irq_cb != NULL) { |
| data->irq_cb(dev, data->irq_cb_data); |
| } |
| } |
| |
| #endif /* CONFIG_UART_INTERRUPT_DRIVEN */ |
| |
| static const DRAM_ATTR struct uart_driver_api serial_esp32_usb_api = { |
| .poll_in = serial_esp32_usb_poll_in, |
| .poll_out = serial_esp32_usb_poll_out, |
| .err_check = serial_esp32_usb_err_check, |
| #ifdef CONFIG_UART_INTERRUPT_DRIVEN |
| .fifo_fill = serial_esp32_usb_fifo_fill, |
| .fifo_read = serial_esp32_usb_fifo_read, |
| .irq_tx_enable = serial_esp32_usb_irq_tx_enable, |
| .irq_tx_disable = serial_esp32_usb_irq_tx_disable, |
| .irq_tx_ready = serial_esp32_usb_irq_tx_ready, |
| .irq_rx_enable = serial_esp32_usb_irq_rx_enable, |
| .irq_rx_disable = serial_esp32_usb_irq_rx_disable, |
| .irq_tx_complete = serial_esp32_usb_irq_tx_complete, |
| .irq_rx_ready = serial_esp32_usb_irq_rx_ready, |
| .irq_err_enable = serial_esp32_usb_irq_err_enable, |
| .irq_err_disable = serial_esp32_usb_irq_err_disable, |
| .irq_is_pending = serial_esp32_usb_irq_is_pending, |
| .irq_update = serial_esp32_usb_irq_update, |
| .irq_callback_set = serial_esp32_usb_irq_callback_set, |
| #endif /* CONFIG_UART_INTERRUPT_DRIVEN */ |
| }; |
| |
| static const DRAM_ATTR struct serial_esp32_usb_config serial_esp32_usb_cfg = { |
| .clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(0)), |
| .clock_subsys = (clock_control_subsys_t)DT_INST_CLOCKS_CELL(0, offset), |
| .irq_source = DT_INST_IRQN(0) |
| }; |
| |
| static struct serial_esp32_usb_data serial_esp32_usb_data_0; |
| |
| DEVICE_DT_INST_DEFINE(0, &serial_esp32_usb_init, NULL, &serial_esp32_usb_data_0, |
| &serial_esp32_usb_cfg, PRE_KERNEL_1, |
| CONFIG_SERIAL_INIT_PRIORITY, &serial_esp32_usb_api); |