doc: delete dead JIRA links
Zephyr JIRA instance is no longer available. Make JIRA links literals.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
diff --git a/boards/arc/em_starterkit/doc/index.rst b/boards/arc/em_starterkit/doc/index.rst
index 79e73a5..96ed049 100644
--- a/boards/arc/em_starterkit/doc/index.rst
+++ b/boards/arc/em_starterkit/doc/index.rst
@@ -310,8 +310,8 @@
The following is a list of TODO items:
-* :jira:`GH-2647`: Zephyr needs i-cache API (all targets)
-* :jira:`GH-2230`: Zephyr ARC port doesn't yet support nested regular interrupts.
+* ``GH-2647``: Zephyr needs i-cache API (all targets)
+* ``GH-2230``: Zephyr ARC port doesn't yet support nested regular interrupts.
* pinmux driver: Possibly it can be written to configure PMods too.
References
diff --git a/doc/conf.py b/doc/conf.py
index 7d50bd9..bdf931b 100644
--- a/doc/conf.py
+++ b/doc/conf.py
@@ -300,7 +300,6 @@
# -- Linkcheck options ----------------------------------------------------
extlinks = {
- "jira": ("https://jira.zephyrproject.org/browse/%s", "JIRA #%s"),
"github": ("https://github.com/zephyrproject-rtos/zephyr/issues/%s", "GitHub #%s"),
}
diff --git a/doc/releases/release-notes-1.5.rst b/doc/releases/release-notes-1.5.rst
index c508f8f..0cb59cf 100644
--- a/doc/releases/release-notes-1.5.rst
+++ b/doc/releases/release-notes-1.5.rst
@@ -122,166 +122,166 @@
Stories
========
-* :jira:`ZEP-49` - x86: unify separate SysV and IAMCU code
-* :jira:`ZEP-55` - enable nanokernel test_context on ARC
-* :jira:`ZEP-58` - investigate use of -fomit-frame-pointer
-* :jira:`ZEP-60` - irq priorities should be rebased to safe values
-* :jira:`ZEP-69` - Extend PWM API to use arbitrary unit of time
-* :jira:`ZEP-203` - clean up APIs for static exceptions
-* :jira:`ZEP-225` - Add kernel API to put SoC to Deep Sleep (DS) State
-* :jira:`ZEP-226` - Update sample PMA to support device suspend/resume
-* :jira:`ZEP-227` - Add kernel API to put SoC to Low Power State (LPS)
-* :jira:`ZEP-228` - File system interface designed after POSIX
-* :jira:`ZEP-232` - Support for USB communications device class ACM
-* :jira:`ZEP-234` - provide a direct memory access (DMA) interface
-* :jira:`ZEP-243` - Create Wiki Structure for Boards
-* :jira:`ZEP-249` - nios2: Enable altera_max10 board in sanitycheck runs for nanokernel
-* :jira:`ZEP-254` - nios2: define NANO_ESF struct and populate _default_esf
-* :jira:`ZEP-270` - nios2: determine optimal value for PERFOPT_ALIGN
-* :jira:`ZEP-271` - nios2: enable microkernel & test cases
-* :jira:`ZEP-272` - nios2: add global pointer support
-* :jira:`ZEP-273` - nios2: implement flashing scripts
-* :jira:`ZEP-274` - nios2: document GDB debugging procedure
-* :jira:`ZEP-275` - nios2: scope support for instruction/data caches
-* :jira:`ZEP-279` - nios2: demonstrate nanokernel hello world
-* :jira:`ZEP-285` - FAT filesystem support on top of SPI Flash
-* :jira:`ZEP-289` - nios2: implement kernel_event_logger
-* :jira:`ZEP-291` - Driver for the ENC28J60 ethernet device
-* :jira:`ZEP-304` - Investigate QEMU support for Nios II
-* :jira:`ZEP-327` - Encryption Libraries needed for Thread support
-* :jira:`ZEP-340` - TLS/SSL
-* :jira:`ZEP-354` - Provide a DMA driver for Quark SE core
-* :jira:`ZEP-356` - DMA device support
-* :jira:`ZEP-357` - Support for the MAX44009 sensor
-* :jira:`ZEP-358` - Add support for TMP112 sensor
-* :jira:`ZEP-412` - Add driver API reentrancy support to RTC driver for LMT
-* :jira:`ZEP-414` - Add driver API reentrancy support to flash driver
-* :jira:`ZEP-415` - aaU, I want to use the NATS messaging protocol to send sensor data to the cloud
-* :jira:`ZEP-416` - MQTT client capability: QoS1, QoS2
-* :jira:`ZEP-424` - AON counter driver needs to add driver API reentrancy support
-* :jira:`ZEP-430` - Add driver API reentrancy support to PWM shim driver
-* :jira:`ZEP-434` - Driver for HMC5883L magnetometer
-* :jira:`ZEP-440` - Add driver API reentrancy support to WDT shim driver
-* :jira:`ZEP-441` - Add driver API reentrancy support to GPIO shim drivers
-* :jira:`ZEP-489` - nios2: handle unimplemented multiply/divide instructions
-* :jira:`ZEP-500` - Domain Name System client library
-* :jira:`ZEP-506` - nios2: support bare metal boot and XIP on Altera MAX10
-* :jira:`ZEP-511` - Add Deep Sleep support in PMA
-* :jira:`ZEP-512` - Add suspend/resume support for some core devices to enable Deep Sleep support in PMA
-* :jira:`ZEP-541` - Integrate QMSI releases to Zephyr
-* :jira:`ZEP-567` - netz sample code
-* :jira:`ZEP-568` - MQTT QoS sample app
-* :jira:`ZEP-573` - IoT applications must use netz API
-* :jira:`ZEP-590` - Update Zephyr's TinyCrypt to version 2.0
-* :jira:`ZEP-643` - Add file system API documentation
-* :jira:`ZEP-650` - Quark SE: Implement PM reference application
-* :jira:`ZEP-652` - QMSI shim driver: RTC: Implement suspend and resume callbacks
-* :jira:`ZEP-655` - QMSI shim driver: PWM: Implement suspend and resume callbacks
-* :jira:`ZEP-658` - QMSI shim driver: GPIO: Implement suspend and resume callbacks
-* :jira:`ZEP-659` - QMSI shim driver: UART: Implement suspend and resume callbacks
-* :jira:`ZEP-662` - QMSI shim driver: Pinmux: Implement suspend and resume callbacks
+* ``ZEP-49`` - x86: unify separate SysV and IAMCU code
+* ``ZEP-55`` - enable nanokernel test_context on ARC
+* ``ZEP-58`` - investigate use of -fomit-frame-pointer
+* ``ZEP-60`` - irq priorities should be rebased to safe values
+* ``ZEP-69`` - Extend PWM API to use arbitrary unit of time
+* ``ZEP-203`` - clean up APIs for static exceptions
+* ``ZEP-225`` - Add kernel API to put SoC to Deep Sleep (DS) State
+* ``ZEP-226`` - Update sample PMA to support device suspend/resume
+* ``ZEP-227`` - Add kernel API to put SoC to Low Power State (LPS)
+* ``ZEP-228`` - File system interface designed after POSIX
+* ``ZEP-232`` - Support for USB communications device class ACM
+* ``ZEP-234`` - provide a direct memory access (DMA) interface
+* ``ZEP-243`` - Create Wiki Structure for Boards
+* ``ZEP-249`` - nios2: Enable altera_max10 board in sanitycheck runs for nanokernel
+* ``ZEP-254`` - nios2: define NANO_ESF struct and populate _default_esf
+* ``ZEP-270`` - nios2: determine optimal value for PERFOPT_ALIGN
+* ``ZEP-271`` - nios2: enable microkernel & test cases
+* ``ZEP-272`` - nios2: add global pointer support
+* ``ZEP-273`` - nios2: implement flashing scripts
+* ``ZEP-274`` - nios2: document GDB debugging procedure
+* ``ZEP-275`` - nios2: scope support for instruction/data caches
+* ``ZEP-279`` - nios2: demonstrate nanokernel hello world
+* ``ZEP-285`` - FAT filesystem support on top of SPI Flash
+* ``ZEP-289`` - nios2: implement kernel_event_logger
+* ``ZEP-291`` - Driver for the ENC28J60 ethernet device
+* ``ZEP-304`` - Investigate QEMU support for Nios II
+* ``ZEP-327`` - Encryption Libraries needed for Thread support
+* ``ZEP-340`` - TLS/SSL
+* ``ZEP-354`` - Provide a DMA driver for Quark SE core
+* ``ZEP-356`` - DMA device support
+* ``ZEP-357`` - Support for the MAX44009 sensor
+* ``ZEP-358`` - Add support for TMP112 sensor
+* ``ZEP-412`` - Add driver API reentrancy support to RTC driver for LMT
+* ``ZEP-414`` - Add driver API reentrancy support to flash driver
+* ``ZEP-415`` - aaU, I want to use the NATS messaging protocol to send sensor data to the cloud
+* ``ZEP-416`` - MQTT client capability: QoS1, QoS2
+* ``ZEP-424`` - AON counter driver needs to add driver API reentrancy support
+* ``ZEP-430`` - Add driver API reentrancy support to PWM shim driver
+* ``ZEP-434`` - Driver for HMC5883L magnetometer
+* ``ZEP-440`` - Add driver API reentrancy support to WDT shim driver
+* ``ZEP-441`` - Add driver API reentrancy support to GPIO shim drivers
+* ``ZEP-489`` - nios2: handle unimplemented multiply/divide instructions
+* ``ZEP-500`` - Domain Name System client library
+* ``ZEP-506`` - nios2: support bare metal boot and XIP on Altera MAX10
+* ``ZEP-511`` - Add Deep Sleep support in PMA
+* ``ZEP-512`` - Add suspend/resume support for some core devices to enable Deep Sleep support in PMA
+* ``ZEP-541`` - Integrate QMSI releases to Zephyr
+* ``ZEP-567`` - netz sample code
+* ``ZEP-568`` - MQTT QoS sample app
+* ``ZEP-573`` - IoT applications must use netz API
+* ``ZEP-590`` - Update Zephyr's TinyCrypt to version 2.0
+* ``ZEP-643`` - Add file system API documentation
+* ``ZEP-650`` - Quark SE: Implement PM reference application
+* ``ZEP-652`` - QMSI shim driver: RTC: Implement suspend and resume callbacks
+* ``ZEP-655`` - QMSI shim driver: PWM: Implement suspend and resume callbacks
+* ``ZEP-658`` - QMSI shim driver: GPIO: Implement suspend and resume callbacks
+* ``ZEP-659`` - QMSI shim driver: UART: Implement suspend and resume callbacks
+* ``ZEP-662`` - QMSI shim driver: Pinmux: Implement suspend and resume callbacks
Epic
====
-* :jira:`ZEP-278` - Enable Nios II CPU on Altera Max10
-* :jira:`ZEP-284` - Flash Filesystem Support
-* :jira:`ZEP-305` - Device Suspend / Resume infrastructure
-* :jira:`ZEP-306` - PWM Enabling
-* :jira:`ZEP-406` - Drivers shall be re-entrant
+* ``ZEP-278`` - Enable Nios II CPU on Altera Max10
+* ``ZEP-284`` - Flash Filesystem Support
+* ``ZEP-305`` - Device Suspend / Resume infrastructure
+* ``ZEP-306`` - PWM Enabling
+* ``ZEP-406`` - Drivers shall be re-entrant
Bug
===
-* :jira:`ZEP-68` - Final image contains duplicates of some routines
-* :jira:`ZEP-156` - PWM Set Value API behaves incorrectly
-* :jira:`ZEP-158` - PWM Set Duty Cycle API does not work
-* :jira:`ZEP-180` - make menuconfig user provided options are ignored at building time
-* :jira:`ZEP-187` - BLE APIs are not documented
-* :jira:`ZEP-218` - [drivers/nble][PTS_TEST] Fix responding with the wrong error codes to the Prepare Write Request
-* :jira:`ZEP-221` - [drivers/nble][PTS_TEST] Implement Execute Write Request handler
-* :jira:`ZEP-369` - When building out of the tree, application object files are not placed into outdir
-* :jira:`ZEP-379` - _k_command_stack may be improperly initialized when debugging
-* :jira:`ZEP-384` - D2000 hangs after I2C communication with BMC150 sensor
-* :jira:`ZEP-401` - PWM driver turns off pin if off time is 0 in set_values
-* :jira:`ZEP-423` - Quark D2000 CRB documentation should include instructions to flash bootloader
-* :jira:`ZEP-435` - Ethernet/IPv4/TCP: ip_buf_appdatalen returns wrong values
-* :jira:`ZEP-456` - doc: ``IDT security`` section disappeared
-* :jira:`ZEP-457` - doc: contribute/doxygen/typedefs.rst: examples files are broken
-* :jira:`ZEP-459` - doc: kconfig reference entries in HTML are lacking a title
-* :jira:`ZEP-460` - doc: document parameters of DEVICE* macros
-* :jira:`ZEP-461` - Release 1.4.0 has broken the BMI160 sample as well as an application based on it
-* :jira:`ZEP-463` - Getting started guide "next" link doesn't take you to "Checking Out the Source Code Anonymously" section
-* :jira:`ZEP-469` - Ethernet/IPv4/TCP: net_receive & net_reply in server mode
-* :jira:`ZEP-474` - ND: Neighbor cache is not getting cleared
-* :jira:`ZEP-475` - Issue with timer callback routine: Condition checked is incorrect
-* :jira:`ZEP-478` - Linux setup docs missing step to install curses development package for Fedora
-* :jira:`ZEP-497` - Ethernet/IPv4/TCP: failed to get free buffer
-* :jira:`ZEP-499` - TMP007 driver returns invalid values for negative temperature
-* :jira:`ZEP-514` - memory corruption in microkernel memory pool defrag()
-* :jira:`ZEP-516` - Ubuntu setup instructions missing 'upgrade' step
-* :jira:`ZEP-518` - SPI not working on Arduino101
-* :jira:`ZEP-522` - TCP/client-mode: disconnect
-* :jira:`ZEP-523` - FIFOs defined by DEFINE_FIFO macro use the same memory buffer
-* :jira:`ZEP-525` - srctree changes are breaking applications
-* :jira:`ZEP-526` - build "kernel event logger" sample app failed for BOARD=quark_d2000_crb
-* :jira:`ZEP-534` - Scan for consistent use of "platform/board/SoC" in documentation
-* :jira:`ZEP-537` - doc: create external wiki page "Maintainers"
-* :jira:`ZEP-545` - Wrong default value of CONFIG_ADC_QMSI_SAMPLE_WIDTH for x86 QMSI ADC
-* :jira:`ZEP-547` - [nble] Failed to start encryption after reconnection
-* :jira:`ZEP-554` - samples/drivers/aon_counter check README file
-* :jira:`ZEP-555` - correct libgcc not getting linked for CONFIG_FLOAT=y on ARM
-* :jira:`ZEP-556` - System hangs during I2C transfer
-* :jira:`ZEP-565` - Ethernet/IPv4/TCP: last commits are breaking network support
-* :jira:`ZEP-571` - ARC kernel BAT failed due to race in nested interrupts
-* :jira:`ZEP-572` - X86 kernel BAT failed: Kernel Allocation Failure!
-* :jira:`ZEP-575` - Ethernet/IPv4/UDP: ip_buf_appdatalen returns wrong values
-* :jira:`ZEP-595` - UART: usb simulated uart doesn't work in poll mode
-* :jira:`ZEP-598` - CoAP Link format filtering is not supported
-* :jira:`ZEP-611` - Links on downloads page are not named consistently
-* :jira:`ZEP-616` - OS X setup instructions not working on El Capitan
-* :jira:`ZEP-617` - MQTT samples build fail because netz.h file missing.
-* :jira:`ZEP-621` - samples/static_lib: fatal error: stdio.h: No such file or directory
-* :jira:`ZEP-623` - MQTT sample mqtt.h missing "mqtt_unsubscribe" function
-* :jira:`ZEP-632` - MQTT fail to re-connect to the broker.
-* :jira:`ZEP-633` - samples/usb/cdc_acm: undefined reference to 'uart_qmsi_pm_save_config'
-* :jira:`ZEP-642` - Inconsistent interpretation of pwm_pin_set_values arguments among drivers
-* :jira:`ZEP-645` - ARC QMSI ADC shim driver fails to read sample data
-* :jira:`ZEP-646` - I2C fail to read GY2561 sensor when GY2561 & GY271 sensor are attached to I2C bus.
-* :jira:`ZEP-647` - Power management state storage should use GPS1 instead of GPS0
-* :jira:`ZEP-669` - MQTT fail to pingreq if broker deliver topic to client but client doesn't read it.
-* :jira:`ZEP-673` - Sanity crashes and doesn't kill qemu upon timeout
-* :jira:`ZEP-679` - HMC5883L I2C Register Read Order
-* :jira:`ZEP-681` - MQTT client sample throws too many warnings when build.
-* :jira:`ZEP-687` - docs: Subsystems/Networking section is almost empty
-* :jira:`ZEP-689` - Builds on em_starterkit fail
-* :jira:`ZEP-695` - FatFs doesn't compile using Newlib
-* :jira:`ZEP-697` - samples/net/test_15_4 cannot be built by sanitycheck
-* :jira:`ZEP-703` - USB sample apps are broken after QMSI update
-* :jira:`ZEP-704` - test_atomic does not complete on ARC
-* :jira:`ZEP-708` - tests/kernel/test_ipm fails on Arduino 101
-* :jira:`ZEP-739` - warnings when building samples for quark_se devboard
+* ``ZEP-68`` - Final image contains duplicates of some routines
+* ``ZEP-156`` - PWM Set Value API behaves incorrectly
+* ``ZEP-158`` - PWM Set Duty Cycle API does not work
+* ``ZEP-180`` - make menuconfig user provided options are ignored at building time
+* ``ZEP-187`` - BLE APIs are not documented
+* ``ZEP-218`` - [drivers/nble][PTS_TEST] Fix responding with the wrong error codes to the Prepare Write Request
+* ``ZEP-221`` - [drivers/nble][PTS_TEST] Implement Execute Write Request handler
+* ``ZEP-369`` - When building out of the tree, application object files are not placed into outdir
+* ``ZEP-379`` - _k_command_stack may be improperly initialized when debugging
+* ``ZEP-384`` - D2000 hangs after I2C communication with BMC150 sensor
+* ``ZEP-401`` - PWM driver turns off pin if off time is 0 in set_values
+* ``ZEP-423`` - Quark D2000 CRB documentation should include instructions to flash bootloader
+* ``ZEP-435`` - Ethernet/IPv4/TCP: ip_buf_appdatalen returns wrong values
+* ``ZEP-456` - doc: ``IDT security``` section disappeared
+* ``ZEP-457`` - doc: contribute/doxygen/typedefs.rst: examples files are broken
+* ``ZEP-459`` - doc: kconfig reference entries in HTML are lacking a title
+* ``ZEP-460`` - doc: document parameters of DEVICE* macros
+* ``ZEP-461`` - Release 1.4.0 has broken the BMI160 sample as well as an application based on it
+* ``ZEP-463`` - Getting started guide "next" link doesn't take you to "Checking Out the Source Code Anonymously" section
+* ``ZEP-469`` - Ethernet/IPv4/TCP: net_receive & net_reply in server mode
+* ``ZEP-474`` - ND: Neighbor cache is not getting cleared
+* ``ZEP-475`` - Issue with timer callback routine: Condition checked is incorrect
+* ``ZEP-478`` - Linux setup docs missing step to install curses development package for Fedora
+* ``ZEP-497`` - Ethernet/IPv4/TCP: failed to get free buffer
+* ``ZEP-499`` - TMP007 driver returns invalid values for negative temperature
+* ``ZEP-514`` - memory corruption in microkernel memory pool defrag()
+* ``ZEP-516`` - Ubuntu setup instructions missing 'upgrade' step
+* ``ZEP-518`` - SPI not working on Arduino101
+* ``ZEP-522`` - TCP/client-mode: disconnect
+* ``ZEP-523`` - FIFOs defined by DEFINE_FIFO macro use the same memory buffer
+* ``ZEP-525`` - srctree changes are breaking applications
+* ``ZEP-526`` - build "kernel event logger" sample app failed for BOARD=quark_d2000_crb
+* ``ZEP-534`` - Scan for consistent use of "platform/board/SoC" in documentation
+* ``ZEP-537`` - doc: create external wiki page "Maintainers"
+* ``ZEP-545`` - Wrong default value of CONFIG_ADC_QMSI_SAMPLE_WIDTH for x86 QMSI ADC
+* ``ZEP-547`` - [nble] Failed to start encryption after reconnection
+* ``ZEP-554`` - samples/drivers/aon_counter check README file
+* ``ZEP-555`` - correct libgcc not getting linked for CONFIG_FLOAT=y on ARM
+* ``ZEP-556`` - System hangs during I2C transfer
+* ``ZEP-565`` - Ethernet/IPv4/TCP: last commits are breaking network support
+* ``ZEP-571`` - ARC kernel BAT failed due to race in nested interrupts
+* ``ZEP-572`` - X86 kernel BAT failed: Kernel Allocation Failure!
+* ``ZEP-575`` - Ethernet/IPv4/UDP: ip_buf_appdatalen returns wrong values
+* ``ZEP-595`` - UART: usb simulated uart doesn't work in poll mode
+* ``ZEP-598`` - CoAP Link format filtering is not supported
+* ``ZEP-611`` - Links on downloads page are not named consistently
+* ``ZEP-616`` - OS X setup instructions not working on El Capitan
+* ``ZEP-617`` - MQTT samples build fail because netz.h file missing.
+* ``ZEP-621`` - samples/static_lib: fatal error: stdio.h: No such file or directory
+* ``ZEP-623`` - MQTT sample mqtt.h missing "mqtt_unsubscribe" function
+* ``ZEP-632`` - MQTT fail to re-connect to the broker.
+* ``ZEP-633`` - samples/usb/cdc_acm: undefined reference to 'uart_qmsi_pm_save_config'
+* ``ZEP-642`` - Inconsistent interpretation of pwm_pin_set_values arguments among drivers
+* ``ZEP-645`` - ARC QMSI ADC shim driver fails to read sample data
+* ``ZEP-646`` - I2C fail to read GY2561 sensor when GY2561 & GY271 sensor are attached to I2C bus.
+* ``ZEP-647`` - Power management state storage should use GPS1 instead of GPS0
+* ``ZEP-669`` - MQTT fail to pingreq if broker deliver topic to client but client doesn't read it.
+* ``ZEP-673`` - Sanity crashes and doesn't kill qemu upon timeout
+* ``ZEP-679`` - HMC5883L I2C Register Read Order
+* ``ZEP-681`` - MQTT client sample throws too many warnings when build.
+* ``ZEP-687`` - docs: Subsystems/Networking section is almost empty
+* ``ZEP-689`` - Builds on em_starterkit fail
+* ``ZEP-695`` - FatFs doesn't compile using Newlib
+* ``ZEP-697`` - samples/net/test_15_4 cannot be built by sanitycheck
+* ``ZEP-703`` - USB sample apps are broken after QMSI update
+* ``ZEP-704`` - test_atomic does not complete on ARC
+* ``ZEP-708`` - tests/kernel/test_ipm fails on Arduino 101
+* ``ZEP-739`` - warnings when building samples for quark_se devboard
Known issues
============
-* :jira:`ZEP-517` - build on windows failed "zephyr/Makefile:869: \*\*\* multiple target patterns"
+* ``ZEP-517`` - build on windows failed "zephyr/Makefile:869: \*\*\* multiple target patterns"
- No workaround, will fix in future release.
-* :jira:`ZEP-711` - I2c: fails to write with mode fast plus
+* ``ZEP-711`` - I2c: fails to write with mode fast plus
- No workaround need it, there is no support for high speed mode.
-* :jira:`ZEP-724` - build on windows failed: 'make: execvp: uname: File or path name too long'
+* ``ZEP-724`` - build on windows failed: 'make: execvp: uname: File or path name too long'
- No workaround, will fix in future release.
-* :jira:`ZEP-467` - Hang using UART and console.
+* ``ZEP-467`` - Hang using UART and console.
- No workaround, will fix in future release.
-* :jira:`ZEP-599` - Periodic call-back function for periodic REST resources is not getting invoked
+* ``ZEP-599`` - Periodic call-back function for periodic REST resources is not getting invoked
- No workaround, will fix in future release.
-* :jira:`ZEP-471` - Ethernet packet with multicast address is not working
+* ``ZEP-471`` - Ethernet packet with multicast address is not working
- No workaround, will fix in future release.
-* :jira:`ZEP-473` - Destination multicast address is not correct
+* ``ZEP-473`` - Destination multicast address is not correct
- No workaround, will fix in future release.
diff --git a/doc/releases/release-notes-1.6.rst b/doc/releases/release-notes-1.6.rst
index 6f8a370..77be80c 100644
--- a/doc/releases/release-notes-1.6.rst
+++ b/doc/releases/release-notes-1.6.rst
@@ -172,201 +172,201 @@
JIRA Related Items
******************
-* :jira:`ZEP-308` - Build System cleanup and Kernel / Application build separation
-* :jira:`ZEP-334` - Unified Kernel
-* :jira:`ZEP-766` - USB Mass Storage access to internal filesystem
-* :jira:`ZEP-1090` - CPU x86 save/restore using new QMSI bootloader flow
-* :jira:`ZEP-1173` - Add support for bonding remove
-* :jira:`ZEP-48` - define API for interrupt controllers
-* :jira:`ZEP-181` - Persistent storage APIs
-* :jira:`ZEP-233` - Support USB mass storage device class
-* :jira:`ZEP-237` - Support pre-built host tools
-* :jira:`ZEP-240` - printk/printf usage in samples
-* :jira:`ZEP-248` - Add a BOARD/SOC porting guide
-* :jira:`ZEP-342` - USB DFU
-* :jira:`ZEP-451` - Quark SE output by default redirected to IPM
-* :jira:`ZEP-521` - ARM - add choice to floating point ABI selection
-* :jira:`ZEP-546` - UART interrupts not triggered on ARC
-* :jira:`ZEP-584` - warn user if SDK is out of date
-* :jira:`ZEP-592` - Sanitycheck support for multiple toolchains
-* :jira:`ZEP-605` - SMP over BR/EDR
-* :jira:`ZEP-614` - Port TinyCrypt 2.0 test cases to Zephyr
-* :jira:`ZEP-622` - Add FS API to truncate/shrink a file
-* :jira:`ZEP-627` - Port Trickle support from Contiki into current stack
-* :jira:`ZEP-635` - Add FS API to grow a file
-* :jira:`ZEP-636` - Add FS API to get volume total and free space
-* :jira:`ZEP-640` - Remove dynamic IRQs/exceptions from Zephyr
-* :jira:`ZEP-653` - QMSI shim driver: Watchdog: Implement suspend and resume callbacks
-* :jira:`ZEP-654` - QMSI shim driver: I2C: Implement suspend and resume callbacks
-* :jira:`ZEP-657` - QMSI shim driver: AONPT: Implement suspend and resume callbacks
-* :jira:`ZEP-661` - QMSI shim driver: SPI: Implement suspend and resume callbacks
-* :jira:`ZEP-688` - unify duplicated sections of arch linker scripts
-* :jira:`ZEP-715` - Add K64F clock configurations
-* :jira:`ZEP-716` - Add Hexiwear board support
-* :jira:`ZEP-717` - Add ksdk I2C shim driver
-* :jira:`ZEP-718` - Add ksdk ethernet shim driver
-* :jira:`ZEP-721` - Add FXOS8700 accelerometer/magnetometer sensor driver
-* :jira:`ZEP-737` - Update host tools from upstream: fixdep.c
-* :jira:`ZEP-740` - PWM API: Check if 'flags' argument is really required
-* :jira:`ZEP-745` - Revisit design of PWM Driver API
-* :jira:`ZEP-750` - Arduino 101 board should support one configuration using original bootloader
-* :jira:`ZEP-758` - Rename Quark SE Devboard to its official name: Quark SE C1000
-* :jira:`ZEP-767` - Add FS API to flush cache of an open file
-* :jira:`ZEP-775` - Enable USB CDC by default on Arduino 101 and redirect serial to USB
-* :jira:`ZEP-783` - ARM Cortex-M0/M0+ support
-* :jira:`ZEP-784` - Add support for Nordic Semiconductor nRF51822 SoC
-* :jira:`ZEP-850` - remove obsolete boards basic_minuteia and basic_cortex_m3
-* :jira:`ZEP-906` - [unified] Add scheduler time slicing support
-* :jira:`ZEP-907` - Test memory pool support (with mailboxes)
-* :jira:`ZEP-908` - Add task offload to fiber support
-* :jira:`ZEP-909` - Adapt tickless idle + power management for ARM
-* :jira:`ZEP-910` - Adapt tickless idle for x86
-* :jira:`ZEP-912` - Finish renaming kernel object types
-* :jira:`ZEP-916` - Eliminate kernel object API anomalies
-* :jira:`ZEP-920` - Investigate malloc/free support
-* :jira:`ZEP-921` - Miscellaneous documentation work
-* :jira:`ZEP-922` - Revise documentation for Kernel Event Logger
-* :jira:`ZEP-923` - Revise documentation for Timing
-* :jira:`ZEP-924` - Revise documentation for Interrupts
-* :jira:`ZEP-925` - API changes to message queues
-* :jira:`ZEP-926` - API changes to memory pools
-* :jira:`ZEP-927` - API changes to memory maps
-* :jira:`ZEP-928` - API changes to event handling
-* :jira:`ZEP-930` - Cut over to unified kernel
-* :jira:`ZEP-933` - Unified kernel ARC port
-* :jira:`ZEP-934` - NIOS_II port
-* :jira:`ZEP-935` - Kernel logger support (validation)
-* :jira:`ZEP-954` - Update device PM API to allow setting additional power states
-* :jira:`ZEP-957` - Create example sample for new unified kernel API usage
-* :jira:`ZEP-959` - sync checkpatch.pl with upstream Linux
-* :jira:`ZEP-966` - need support for EM7D SOC on em_starterkit
-* :jira:`ZEP-975` - DNS client port to new IP stack
-* :jira:`ZEP-981` - Add doxygen documentation to both include/kernel.h and include/legacy.h
-* :jira:`ZEP-989` - Cache next ready thread instead of finding out the long way
-* :jira:`ZEP-993` - Quark SE (x86): Refactor save/restore execution context feature
-* :jira:`ZEP-994` - Quark SE (ARC): Add PMA sample
-* :jira:`ZEP-996` - Refactor save/restore feature from i2c_qmsi driver
-* :jira:`ZEP-997` - Refactor save/restore feature from spi_qmsi driver
-* :jira:`ZEP-998` - Refactor save/restore feature from uart_qmsi driver
-* :jira:`ZEP-999` - Refactor save/restore feature from gpio_qmsi driver
-* :jira:`ZEP-1000` - Refactor save/restore feature from rtc_qmsi driver
-* :jira:`ZEP-1001` - Refactor save/restore feature from wdt_qmsi driver
-* :jira:`ZEP-1002` - Refactor save/restore feature from counter_qmsi_aonpt driver
-* :jira:`ZEP-1004` - Extend counter_qmsi_aon driver to support save/restore peripheral context
-* :jira:`ZEP-1005` - Extend dma_qmsi driver to support save/restore peripheral context
-* :jira:`ZEP-1006` - Extend soc_flash_qmsi driver to support save/restore peripheral context
-* :jira:`ZEP-1008` - Extend pwm_qmsi driver to support save/restore peripheral context
-* :jira:`ZEP-1023` - workq in Kernel primer for unified kernel
-* :jira:`ZEP-1030` - Enable QMSI shim drivers of SoC peripherals on the sensor subsystem
-* :jira:`ZEP-1043` - Update QMSI to 1.2
-* :jira:`ZEP-1045` - Add/Enhance shim layer to wrap SOC specific PM implementations
-* :jira:`ZEP-1046` - Implement RAM sharing between bootloader and Zephyr
-* :jira:`ZEP-1047` - Adapt to new PM related boot flow changes in QMSI boot loader
-* :jira:`ZEP-1106` - Fix all test failures from TCF
-* :jira:`ZEP-1107` - Update QMSI to 1.3
-* :jira:`ZEP-1109` - Texas Instruments CC3200 LaunchXL Support
-* :jira:`ZEP-1119` - move top level usb/ to sys/usb
-* :jira:`ZEP-1120` - move top level fs/ to sys/fs
-* :jira:`ZEP-1121` - Add config support for enabling SoCWatch in Zephyr
-* :jira:`ZEP-1140` - Add a unified kernel version of power_mgr sample app for testing PM code with the new kernel
-* :jira:`ZEP-1188` - Add an API to retrieve pending interrupts for wake events
-* :jira:`ZEP-1191` - Create wiki page for Hexiwear board
-* :jira:`ZEP-1235` - Basic shell support for file system browsing
-* :jira:`ZEP-1245` - ARM LTD V2M Beetle Support
-* :jira:`ZEP-1313` - porting and user guides must include a security section
-* :jira:`ZEP-1386` - Revise power management document to reflect latest changes
-* :jira:`ZEP-199` - Zephyr driver model is undocumented
-* :jira:`ZEP-436` - Test case tests/kernel/test_mem_safe fails on ARM hardware
-* :jira:`ZEP-471` - Ethernet packet with multicast address is not working
-* :jira:`ZEP-472` - Ethernet packets are getting missed if sent in quick succession.
-* :jira:`ZEP-517` - build on windows failed "zephyr/Makefile:869: \*\*\* multiple target patterns"
-* :jira:`ZEP-528` - ARC has 2 almost identical copies of the linker script
-* :jira:`ZEP-577` - Sample application source does not compile on Windows
-* :jira:`ZEP-601` - enable CONFIG_DEBUG_INFO
-* :jira:`ZEP-602` - unhandled CPU exceptions/interrupts report wrong faulting vector if triggered by CPU
-* :jira:`ZEP-615` - Un-supported flash erase size listed in SPI flash w25qxxdv driver header file
-* :jira:`ZEP-639` - device_pm_ops structure should be defined as static
-* :jira:`ZEP-686` - docs: Info in "Application Development Primer" and "Developing an Application and the Build System" is largely duplicated
-* :jira:`ZEP-698` - samples/task_profiler issues
-* :jira:`ZEP-707` - mem_safe test stomps on top of .data and bottom of .noinit
-* :jira:`ZEP-724` - build on windows failed: 'make: execvp: uname: File or path name too long'
-* :jira:`ZEP-733` - Minimal libc shouldn't be providing stddef.h
-* :jira:`ZEP-762` - unexpected "abspath" and "notdir" from mingw make system
-* :jira:`ZEP-777` - samples/driver/i2c_stts751: kconfig build warning from "select DMA_QMSI"
-* :jira:`ZEP-778` - Samples/drivers/i2c_lsm9ds0: kconfig build warning from "select DMA_QMSI"
-* :jira:`ZEP-779` - Using current MinGW gcc version 5.3.0 breaks Zephyr build on Windows
-* :jira:`ZEP-845` - UART for ARC on Arduino 101 behaves unexpectedly
-* :jira:`ZEP-905` - hello_world compilation for arduino_due target fails when using CROSS_COMPILE
-* :jira:`ZEP-940` - Fail to get ATT response
-* :jira:`ZEP-950` - USB: Device is not listed by USB20CV test suite
-* :jira:`ZEP-961` - samples: other cases cannot execute after run aon_counter case
-* :jira:`ZEP-967` - Sanity doesn't build 'samples/usb/dfu' with assertions (-R)
-* :jira:`ZEP-970` - Sanity doesn't build 'tests/kernel/test_build' with assertions (-R)
-* :jira:`ZEP-982` - Minimal libc has EWOULDBLOCK != EAGAIN
-* :jira:`ZEP-1014` - [TCF] tests/bluetooth/init build fail
-* :jira:`ZEP-1025` - Unified kernel build sometimes breaks on a missing .d dependency file.
-* :jira:`ZEP-1027` - Documentation for GCC ARM is not accurate
-* :jira:`ZEP-1031` - qmsi: dma: driver test fails with LLVM
-* :jira:`ZEP-1048` - grove_lcd sample: sample does not work if you disable serial
-* :jira:`ZEP-1051` - mpool allocation failed after defrag twice...
-* :jira:`ZEP-1062` - Unified kernel isn't compatible with CONFIG_NEWLIB_LIBC
-* :jira:`ZEP-1074` - ATT retrying misbehaves when ATT insufficient Authentication is received
-* :jira:`ZEP-1076` - "samples/philosophers/unified" build failed with dynamic stack
-* :jira:`ZEP-1077` - "samples/philosophers/unified" build warnings with NUM_PHIL<6
-* :jira:`ZEP-1079` - Licensing not clear for imported components
-* :jira:`ZEP-1097` - ENC28J60 driver fails on concurrent tx and rx
-* :jira:`ZEP-1098` - ENC28J60 fails to receive big data frames
-* :jira:`ZEP-1100` - Current master still identifies itself as 1.5.0
-* :jira:`ZEP-1101` - SYS_KERNEL_VER_PATCHLEVEL() and friends artificially limit version numbers to 4 bits
-* :jira:`ZEP-1124` - tests/kernel/test_sprintf/microkernel/testcase.ini#test failure on frdm_k64f
-* :jira:`ZEP-1130` - region 'RAM' overflowed occurs while building test_hmac_prng
-* :jira:`ZEP-1138` - Received packets not being passed to upper layer from IP stack when using ENC28J60 driver
-* :jira:`ZEP-1139` - Fix build error when power management is built with unified kernel
-* :jira:`ZEP-1141` - TinyCrypt SHA256 test fails with system crash using unified kernel type
-* :jira:`ZEP-1144` - TinyCrypt AES128 fixed-key with variable-text test fails using unified kernel type
-* :jira:`ZEP-1145` - system hang after TinyCrypt HMAC test
-* :jira:`ZEP-1146` - zephyrproject.org home page needs technical scrub for 1.6 release
-* :jira:`ZEP-1149` - port ztest framework to unified kernel
-* :jira:`ZEP-1154` - tests/samples failing with unified kernel
-* :jira:`ZEP-1155` - Fix filesystem API namespace
-* :jira:`ZEP-1163` - LIB_INCLUDE_DIR is clobbered in Makefile second pass
-* :jira:`ZEP-1164` - ztest skip waiting the test case to finish its execution
-* :jira:`ZEP-1179` - Build issues when compiling with LLVM from ISSM (icx)
-* :jira:`ZEP-1182` - kernel.h doxygen show unexpected "asm" blocks
-* :jira:`ZEP-1183` - btshell return "panic: errcode -1" when init bt
-* :jira:`ZEP-1195` - Wrong ATT error code passed to the application
-* :jira:`ZEP-1199` - [L2CAP] No credits to receive packet
-* :jira:`ZEP-1219` - [L2CAP] Data sent exceeds maximum PDU size
-* :jira:`ZEP-1221` - Connection Timeout during pairing
-* :jira:`ZEP-1226` - cortex M7 port assembler error
-* :jira:`ZEP-1227` - ztest native testing not working in unified kernel
-* :jira:`ZEP-1232` - Daily build is failing asserts
-* :jira:`ZEP-1234` - Removal of fiber* APIs due to unified migration breaks USB mass storage patchset
-* :jira:`ZEP-1247` - Test tests/legacy/benchmark/latency_measure is broken for daily sanitycheck
-* :jira:`ZEP-1252` - Test test_chan_blen_transfer does not build for quark_d2000_crb
-* :jira:`ZEP-1277` - Flash driver (w25qxxdv) erase function is not checking for offset alignment
-* :jira:`ZEP-1278` - Incorrect boundary check in flash driver (w25qxxdv) for erase offset
-* :jira:`ZEP-1287` - ARC SPI 1 Port is not working
-* :jira:`ZEP-1289` - Race condition with k_sem_take
-* :jira:`ZEP-1291` - libzephyr.a dependency on phony "gcc" target
-* :jira:`ZEP-1293` - ENC28J60 driver doesn't work on Arduino 101
-* :jira:`ZEP-1295` - incorrect doxygen comment in kernel.h:k_work_pending()
-* :jira:`ZEP-1297` - test/legacy/kernel/test_mail: failure on ARC platforms
-* :jira:`ZEP-1299` - System can't resume completely with DMA suspend and resume operation
-* :jira:`ZEP-1302` - ENC28J60 fails with rx/tx of long frames
-* :jira:`ZEP-1303` - Configuration talks about >32 thread prios, but the kernel does not support it
-* :jira:`ZEP-1309` - ARM uses the end of memory for its init stack
-* :jira:`ZEP-1310` - ARC uses the end of memory for its init stack
-* :jira:`ZEP-1312` - ARC: software crashed at k_mbox_get() with async sending a message
-* :jira:`ZEP-1319` - Zephyr is unable to compile when CONFIG_RUNTIME_NMI is enabled on ARM platforms
-* :jira:`ZEP-1341` - power_states test app passes wrong value as power state to post_ops functions
-* :jira:`ZEP-1343` - tests/drivers/pci_enum: failing on QEMU ARM and X86 due to missing commit
-* :jira:`ZEP-1345` - cpu context save and restore could corrupt stack
-* :jira:`ZEP-1349` - ARC sleep needs to pass interrupt priority threshold when interrupts are enabled
-* :jira:`ZEP-1353` - FDRM k64f Console output broken on normal flash mode
+* ``ZEP-308`` - Build System cleanup and Kernel / Application build separation
+* ``ZEP-334`` - Unified Kernel
+* ``ZEP-766`` - USB Mass Storage access to internal filesystem
+* ``ZEP-1090`` - CPU x86 save/restore using new QMSI bootloader flow
+* ``ZEP-1173`` - Add support for bonding remove
+* ``ZEP-48`` - define API for interrupt controllers
+* ``ZEP-181`` - Persistent storage APIs
+* ``ZEP-233`` - Support USB mass storage device class
+* ``ZEP-237`` - Support pre-built host tools
+* ``ZEP-240`` - printk/printf usage in samples
+* ``ZEP-248`` - Add a BOARD/SOC porting guide
+* ``ZEP-342`` - USB DFU
+* ``ZEP-451`` - Quark SE output by default redirected to IPM
+* ``ZEP-521`` - ARM - add choice to floating point ABI selection
+* ``ZEP-546`` - UART interrupts not triggered on ARC
+* ``ZEP-584`` - warn user if SDK is out of date
+* ``ZEP-592`` - Sanitycheck support for multiple toolchains
+* ``ZEP-605`` - SMP over BR/EDR
+* ``ZEP-614`` - Port TinyCrypt 2.0 test cases to Zephyr
+* ``ZEP-622`` - Add FS API to truncate/shrink a file
+* ``ZEP-627`` - Port Trickle support from Contiki into current stack
+* ``ZEP-635`` - Add FS API to grow a file
+* ``ZEP-636`` - Add FS API to get volume total and free space
+* ``ZEP-640`` - Remove dynamic IRQs/exceptions from Zephyr
+* ``ZEP-653`` - QMSI shim driver: Watchdog: Implement suspend and resume callbacks
+* ``ZEP-654`` - QMSI shim driver: I2C: Implement suspend and resume callbacks
+* ``ZEP-657`` - QMSI shim driver: AONPT: Implement suspend and resume callbacks
+* ``ZEP-661`` - QMSI shim driver: SPI: Implement suspend and resume callbacks
+* ``ZEP-688`` - unify duplicated sections of arch linker scripts
+* ``ZEP-715`` - Add K64F clock configurations
+* ``ZEP-716`` - Add Hexiwear board support
+* ``ZEP-717`` - Add ksdk I2C shim driver
+* ``ZEP-718`` - Add ksdk ethernet shim driver
+* ``ZEP-721`` - Add FXOS8700 accelerometer/magnetometer sensor driver
+* ``ZEP-737`` - Update host tools from upstream: fixdep.c
+* ``ZEP-740`` - PWM API: Check if 'flags' argument is really required
+* ``ZEP-745`` - Revisit design of PWM Driver API
+* ``ZEP-750`` - Arduino 101 board should support one configuration using original bootloader
+* ``ZEP-758`` - Rename Quark SE Devboard to its official name: Quark SE C1000
+* ``ZEP-767`` - Add FS API to flush cache of an open file
+* ``ZEP-775`` - Enable USB CDC by default on Arduino 101 and redirect serial to USB
+* ``ZEP-783`` - ARM Cortex-M0/M0+ support
+* ``ZEP-784`` - Add support for Nordic Semiconductor nRF51822 SoC
+* ``ZEP-850`` - remove obsolete boards basic_minuteia and basic_cortex_m3
+* ``ZEP-906`` - [unified] Add scheduler time slicing support
+* ``ZEP-907`` - Test memory pool support (with mailboxes)
+* ``ZEP-908`` - Add task offload to fiber support
+* ``ZEP-909`` - Adapt tickless idle + power management for ARM
+* ``ZEP-910`` - Adapt tickless idle for x86
+* ``ZEP-912`` - Finish renaming kernel object types
+* ``ZEP-916`` - Eliminate kernel object API anomalies
+* ``ZEP-920`` - Investigate malloc/free support
+* ``ZEP-921`` - Miscellaneous documentation work
+* ``ZEP-922`` - Revise documentation for Kernel Event Logger
+* ``ZEP-923`` - Revise documentation for Timing
+* ``ZEP-924`` - Revise documentation for Interrupts
+* ``ZEP-925`` - API changes to message queues
+* ``ZEP-926`` - API changes to memory pools
+* ``ZEP-927`` - API changes to memory maps
+* ``ZEP-928`` - API changes to event handling
+* ``ZEP-930`` - Cut over to unified kernel
+* ``ZEP-933`` - Unified kernel ARC port
+* ``ZEP-934`` - NIOS_II port
+* ``ZEP-935`` - Kernel logger support (validation)
+* ``ZEP-954`` - Update device PM API to allow setting additional power states
+* ``ZEP-957`` - Create example sample for new unified kernel API usage
+* ``ZEP-959`` - sync checkpatch.pl with upstream Linux
+* ``ZEP-966`` - need support for EM7D SOC on em_starterkit
+* ``ZEP-975`` - DNS client port to new IP stack
+* ``ZEP-981`` - Add doxygen documentation to both include/kernel.h and include/legacy.h
+* ``ZEP-989`` - Cache next ready thread instead of finding out the long way
+* ``ZEP-993`` - Quark SE (x86): Refactor save/restore execution context feature
+* ``ZEP-994`` - Quark SE (ARC): Add PMA sample
+* ``ZEP-996`` - Refactor save/restore feature from i2c_qmsi driver
+* ``ZEP-997`` - Refactor save/restore feature from spi_qmsi driver
+* ``ZEP-998`` - Refactor save/restore feature from uart_qmsi driver
+* ``ZEP-999`` - Refactor save/restore feature from gpio_qmsi driver
+* ``ZEP-1000`` - Refactor save/restore feature from rtc_qmsi driver
+* ``ZEP-1001`` - Refactor save/restore feature from wdt_qmsi driver
+* ``ZEP-1002`` - Refactor save/restore feature from counter_qmsi_aonpt driver
+* ``ZEP-1004`` - Extend counter_qmsi_aon driver to support save/restore peripheral context
+* ``ZEP-1005`` - Extend dma_qmsi driver to support save/restore peripheral context
+* ``ZEP-1006`` - Extend soc_flash_qmsi driver to support save/restore peripheral context
+* ``ZEP-1008`` - Extend pwm_qmsi driver to support save/restore peripheral context
+* ``ZEP-1023`` - workq in Kernel primer for unified kernel
+* ``ZEP-1030`` - Enable QMSI shim drivers of SoC peripherals on the sensor subsystem
+* ``ZEP-1043`` - Update QMSI to 1.2
+* ``ZEP-1045`` - Add/Enhance shim layer to wrap SOC specific PM implementations
+* ``ZEP-1046`` - Implement RAM sharing between bootloader and Zephyr
+* ``ZEP-1047`` - Adapt to new PM related boot flow changes in QMSI boot loader
+* ``ZEP-1106`` - Fix all test failures from TCF
+* ``ZEP-1107`` - Update QMSI to 1.3
+* ``ZEP-1109`` - Texas Instruments CC3200 LaunchXL Support
+* ``ZEP-1119`` - move top level usb/ to sys/usb
+* ``ZEP-1120`` - move top level fs/ to sys/fs
+* ``ZEP-1121`` - Add config support for enabling SoCWatch in Zephyr
+* ``ZEP-1140`` - Add a unified kernel version of power_mgr sample app for testing PM code with the new kernel
+* ``ZEP-1188`` - Add an API to retrieve pending interrupts for wake events
+* ``ZEP-1191`` - Create wiki page for Hexiwear board
+* ``ZEP-1235`` - Basic shell support for file system browsing
+* ``ZEP-1245`` - ARM LTD V2M Beetle Support
+* ``ZEP-1313`` - porting and user guides must include a security section
+* ``ZEP-1386`` - Revise power management document to reflect latest changes
+* ``ZEP-199`` - Zephyr driver model is undocumented
+* ``ZEP-436`` - Test case tests/kernel/test_mem_safe fails on ARM hardware
+* ``ZEP-471`` - Ethernet packet with multicast address is not working
+* ``ZEP-472`` - Ethernet packets are getting missed if sent in quick succession.
+* ``ZEP-517`` - build on windows failed "zephyr/Makefile:869: \*\*\* multiple target patterns"
+* ``ZEP-528`` - ARC has 2 almost identical copies of the linker script
+* ``ZEP-577`` - Sample application source does not compile on Windows
+* ``ZEP-601`` - enable CONFIG_DEBUG_INFO
+* ``ZEP-602`` - unhandled CPU exceptions/interrupts report wrong faulting vector if triggered by CPU
+* ``ZEP-615`` - Un-supported flash erase size listed in SPI flash w25qxxdv driver header file
+* ``ZEP-639`` - device_pm_ops structure should be defined as static
+* ``ZEP-686`` - docs: Info in "Application Development Primer" and "Developing an Application and the Build System" is largely duplicated
+* ``ZEP-698`` - samples/task_profiler issues
+* ``ZEP-707`` - mem_safe test stomps on top of .data and bottom of .noinit
+* ``ZEP-724`` - build on windows failed: 'make: execvp: uname: File or path name too long'
+* ``ZEP-733`` - Minimal libc shouldn't be providing stddef.h
+* ``ZEP-762`` - unexpected "abspath" and "notdir" from mingw make system
+* ``ZEP-777`` - samples/driver/i2c_stts751: kconfig build warning from "select DMA_QMSI"
+* ``ZEP-778`` - Samples/drivers/i2c_lsm9ds0: kconfig build warning from "select DMA_QMSI"
+* ``ZEP-779`` - Using current MinGW gcc version 5.3.0 breaks Zephyr build on Windows
+* ``ZEP-845`` - UART for ARC on Arduino 101 behaves unexpectedly
+* ``ZEP-905`` - hello_world compilation for arduino_due target fails when using CROSS_COMPILE
+* ``ZEP-940`` - Fail to get ATT response
+* ``ZEP-950`` - USB: Device is not listed by USB20CV test suite
+* ``ZEP-961`` - samples: other cases cannot execute after run aon_counter case
+* ``ZEP-967`` - Sanity doesn't build 'samples/usb/dfu' with assertions (-R)
+* ``ZEP-970`` - Sanity doesn't build 'tests/kernel/test_build' with assertions (-R)
+* ``ZEP-982`` - Minimal libc has EWOULDBLOCK != EAGAIN
+* ``ZEP-1014`` - [TCF] tests/bluetooth/init build fail
+* ``ZEP-1025`` - Unified kernel build sometimes breaks on a missing .d dependency file.
+* ``ZEP-1027`` - Documentation for GCC ARM is not accurate
+* ``ZEP-1031`` - qmsi: dma: driver test fails with LLVM
+* ``ZEP-1048`` - grove_lcd sample: sample does not work if you disable serial
+* ``ZEP-1051`` - mpool allocation failed after defrag twice...
+* ``ZEP-1062`` - Unified kernel isn't compatible with CONFIG_NEWLIB_LIBC
+* ``ZEP-1074`` - ATT retrying misbehaves when ATT insufficient Authentication is received
+* ``ZEP-1076`` - "samples/philosophers/unified" build failed with dynamic stack
+* ``ZEP-1077`` - "samples/philosophers/unified" build warnings with NUM_PHIL<6
+* ``ZEP-1079`` - Licensing not clear for imported components
+* ``ZEP-1097`` - ENC28J60 driver fails on concurrent tx and rx
+* ``ZEP-1098`` - ENC28J60 fails to receive big data frames
+* ``ZEP-1100`` - Current master still identifies itself as 1.5.0
+* ``ZEP-1101`` - SYS_KERNEL_VER_PATCHLEVEL() and friends artificially limit version numbers to 4 bits
+* ``ZEP-1124`` - tests/kernel/test_sprintf/microkernel/testcase.ini#test failure on frdm_k64f
+* ``ZEP-1130`` - region 'RAM' overflowed occurs while building test_hmac_prng
+* ``ZEP-1138`` - Received packets not being passed to upper layer from IP stack when using ENC28J60 driver
+* ``ZEP-1139`` - Fix build error when power management is built with unified kernel
+* ``ZEP-1141`` - TinyCrypt SHA256 test fails with system crash using unified kernel type
+* ``ZEP-1144`` - TinyCrypt AES128 fixed-key with variable-text test fails using unified kernel type
+* ``ZEP-1145`` - system hang after TinyCrypt HMAC test
+* ``ZEP-1146`` - zephyrproject.org home page needs technical scrub for 1.6 release
+* ``ZEP-1149`` - port ztest framework to unified kernel
+* ``ZEP-1154`` - tests/samples failing with unified kernel
+* ``ZEP-1155`` - Fix filesystem API namespace
+* ``ZEP-1163`` - LIB_INCLUDE_DIR is clobbered in Makefile second pass
+* ``ZEP-1164`` - ztest skip waiting the test case to finish its execution
+* ``ZEP-1179`` - Build issues when compiling with LLVM from ISSM (icx)
+* ``ZEP-1182`` - kernel.h doxygen show unexpected "asm" blocks
+* ``ZEP-1183`` - btshell return "panic: errcode -1" when init bt
+* ``ZEP-1195`` - Wrong ATT error code passed to the application
+* ``ZEP-1199`` - [L2CAP] No credits to receive packet
+* ``ZEP-1219`` - [L2CAP] Data sent exceeds maximum PDU size
+* ``ZEP-1221`` - Connection Timeout during pairing
+* ``ZEP-1226`` - cortex M7 port assembler error
+* ``ZEP-1227`` - ztest native testing not working in unified kernel
+* ``ZEP-1232`` - Daily build is failing asserts
+* ``ZEP-1234`` - Removal of fiber* APIs due to unified migration breaks USB mass storage patchset
+* ``ZEP-1247`` - Test tests/legacy/benchmark/latency_measure is broken for daily sanitycheck
+* ``ZEP-1252`` - Test test_chan_blen_transfer does not build for quark_d2000_crb
+* ``ZEP-1277`` - Flash driver (w25qxxdv) erase function is not checking for offset alignment
+* ``ZEP-1278`` - Incorrect boundary check in flash driver (w25qxxdv) for erase offset
+* ``ZEP-1287`` - ARC SPI 1 Port is not working
+* ``ZEP-1289`` - Race condition with k_sem_take
+* ``ZEP-1291`` - libzephyr.a dependency on phony "gcc" target
+* ``ZEP-1293`` - ENC28J60 driver doesn't work on Arduino 101
+* ``ZEP-1295`` - incorrect doxygen comment in kernel.h:k_work_pending()
+* ``ZEP-1297`` - test/legacy/kernel/test_mail: failure on ARC platforms
+* ``ZEP-1299`` - System can't resume completely with DMA suspend and resume operation
+* ``ZEP-1302`` - ENC28J60 fails with rx/tx of long frames
+* ``ZEP-1303`` - Configuration talks about >32 thread prios, but the kernel does not support it
+* ``ZEP-1309`` - ARM uses the end of memory for its init stack
+* ``ZEP-1310`` - ARC uses the end of memory for its init stack
+* ``ZEP-1312`` - ARC: software crashed at k_mbox_get() with async sending a message
+* ``ZEP-1319`` - Zephyr is unable to compile when CONFIG_RUNTIME_NMI is enabled on ARM platforms
+* ``ZEP-1341`` - power_states test app passes wrong value as power state to post_ops functions
+* ``ZEP-1343`` - tests/drivers/pci_enum: failing on QEMU ARM and X86 due to missing commit
+* ``ZEP-1345`` - cpu context save and restore could corrupt stack
+* ``ZEP-1349`` - ARC sleep needs to pass interrupt priority threshold when interrupts are enabled
+* ``ZEP-1353`` - FDRM k64f Console output broken on normal flash mode
Known Issues
************
-* :jira:`ZEP-1405` - function l2cap_br_conn_req in /subsys/bluetooth/host/l2cap_br.c
+* ``ZEP-1405`` - function l2cap_br_conn_req in /subsys/bluetooth/host/l2cap_br.c
references uninitialized pointer
diff --git a/doc/releases/release-notes-1.7.rst b/doc/releases/release-notes-1.7.rst
index e5c3021..8f4bce1 100644
--- a/doc/releases/release-notes-1.7.rst
+++ b/doc/releases/release-notes-1.7.rst
@@ -156,301 +156,301 @@
.. comment List derived from https://jira.zephyrproject.org/issues/?filter=10345
-* :jira:`ZEP-19` - IPSP node support
-* :jira:`ZEP-145` - no 'make flash' for Arduino Due
-* :jira:`ZEP-328` - HW Encryption Abstraction
-* :jira:`ZEP-359` - Move QEMU handling to a central location
-* :jira:`ZEP-365` - Zephyr's MQTT library
-* :jira:`ZEP-437` - TCP/IP API
-* :jira:`ZEP-513` - extern declarations of small microkernel objects in designated sections require __attribute__((section)) in gp-enabled systems
-* :jira:`ZEP-591` - MQTT Port to New IP Stack
-* :jira:`ZEP-604` - In coap_server sample app, CoAP resource separate is not able to send separate response
-* :jira:`ZEP-613` - TCP/UDP client and server mode functionality
-* :jira:`ZEP-641` - Bluetooth Eddystone sample does not correctly implement Eddystone beacon
-* :jira:`ZEP-648` - New CoAP Implementation
-* :jira:`ZEP-664` - Extend spi_qmsi_ss driver to support save/restore peripheral context
-* :jira:`ZEP-665` - Extend gpio_qmsi_ss driver to support save/restore peripheral context
-* :jira:`ZEP-666` - Extend i2c_qmsi_ss driver to support save/restore peripheral context
-* :jira:`ZEP-667` - Extend adc_qmsi_ss driver to support save/restore peripheral context
-* :jira:`ZEP-686` - docs: Info in Application Development Primer and Developing an Application and the Build System is largely duplicated
-* :jira:`ZEP-706` - cannot set debug breakpoints on ARC side of Arduino 101
-* :jira:`ZEP-719` - Add ksdk uart shim driver
-* :jira:`ZEP-734` - Port AES-CMAC-PRF-128 [RFC 4615] encryption library for Thread support
-* :jira:`ZEP-742` - nRF5x Series: System Clock driver using NRF_RTC
-* :jira:`ZEP-744` - USB WebUSB
-* :jira:`ZEP-748` - Enable mbedtls_sslclient sample to run on quark se board
-* :jira:`ZEP-759` - Add preliminary support for Atmel SAM E70 (Cortex-M7) chipset family and SAM E70 Xplained board
-* :jira:`ZEP-788` - UDP
-* :jira:`ZEP-789` - IPv4
-* :jira:`ZEP-790` - ICMPv4
-* :jira:`ZEP-791` - TCP
-* :jira:`ZEP-792` - ARP
-* :jira:`ZEP-793` - DNS Resolver
-* :jira:`ZEP-794` - Requirements for Internet Hosts - Communication Layers
-* :jira:`ZEP-796` - DHCPv4
-* :jira:`ZEP-798` - IPv6
-* :jira:`ZEP-799` - HTTP over TLS
-* :jira:`ZEP-801` - DNS Extensions to support IPv6
-* :jira:`ZEP-804` - IPv6 Addressing Architecture
-* :jira:`ZEP-805` - Internet Control Message Protocol (ICMP) v6
-* :jira:`ZEP-807` - Neighbor Discovery for IPv6
-* :jira:`ZEP-808` - IPv6 Stateless Autoconfiguration (SLAAC)
-* :jira:`ZEP-809` - IPv6 over 802.15.4
-* :jira:`ZEP-811` - The Trickle Algorithm
-* :jira:`ZEP-812` - Compression Format for IPv6 over 802.15.4
-* :jira:`ZEP-813` - RPL: IPv6 Routing Protocol
-* :jira:`ZEP-814` - Routing Metrics used in Path Selection
-* :jira:`ZEP-815` - Objective Function Zero for RPL
-* :jira:`ZEP-816` - Minimum Rank with Hysteresis (RPL)
-* :jira:`ZEP-818` - CoAP working over the new IP stack
-* :jira:`ZEP-820` - HTTP v1.1 Server Sample
-* :jira:`ZEP-823` - New IP Stack - Documentation
-* :jira:`ZEP-824` - Network Device Driver Porting Guide
-* :jira:`ZEP-825` - Porting guide for old-to-new IP Stack APIs
-* :jira:`ZEP-827` - HTTP Client sample application
-* :jira:`ZEP-830` - ICMPv6 Parameter Problem Support
-* :jira:`ZEP-832` - Hop-by-Hop option handling
-* :jira:`ZEP-847` - Network protocols must be moved to subsys/net/lib
-* :jira:`ZEP-854` - CoAP with DTLS sample
-* :jira:`ZEP-859` - Migrate ENC28J60 driver to YAIP IP stack
-* :jira:`ZEP-865` - convert filesystem sample to a runnable test
-* :jira:`ZEP-872` - Unable to flash Zephyr on Arduino 101 using Ubuntu and following wiki instructions
-* :jira:`ZEP-873` - DMA API Update
-* :jira:`ZEP-875` - 6LoWPAN - Context based compression support
-* :jira:`ZEP-876` - 6LoWPAN - Offset based Reassembly of 802.15.4 packets
-* :jira:`ZEP-879` - 6LoWPAN - Stateless Address Autoconfiguration
-* :jira:`ZEP-882` - 6LoWPAN - IPv6 Next Header Compression
-* :jira:`ZEP-883` - IP Stack L2 Interface Management API
-* :jira:`ZEP-884` - 802.15.4 - CSMA-CA Radio protocol support
-* :jira:`ZEP-885` - 802.15.4 - Beacon frame support
-* :jira:`ZEP-886` - 802.15.4 - MAC command frame support
-* :jira:`ZEP-887` - 802.15.4 - Management service: RFD level support
-* :jira:`ZEP-911` - Refine thread priorities & locking
-* :jira:`ZEP-919` - Purge obsolete microkernel & nanokernel code
-* :jira:`ZEP-929` - Verify the preempt-thread-only and coop-thread-only configurations
-* :jira:`ZEP-931` - Finalize kernel file naming & locations
-* :jira:`ZEP-936` - Adapt drivers to unified kernel
-* :jira:`ZEP-937` - Adapt networking to unified kernel
-* :jira:`ZEP-946` - Galileo Gen1 board support dropped?
-* :jira:`ZEP-951` - CONFIG_GDB_INFO build not working on ARM
-* :jira:`ZEP-953` - CONFIG_HPET_TIMER_DEBUG build warning
-* :jira:`ZEP-958` - simplify pinmux interface and merge the pinmux_dev into one single API
-* :jira:`ZEP-964` - Add a (hidden?) Kconfig option for disabling legacy API
-* :jira:`ZEP-975` - DNS client port to new IP stack
-* :jira:`ZEP-1012` - NATS client port to new IP stack
-* :jira:`ZEP-1038` - Hard real-time interrupt support
-* :jira:`ZEP-1060` - Contributor guide for documentation missing
-* :jira:`ZEP-1103` - Propose and implement synchronization flow for multicore power management
-* :jira:`ZEP-1165` - support enums as IRQ line argument in IRQ_CONNECT()
-* :jira:`ZEP-1172` - Update logger Api to allow using a hook for SYS_LOG_BACKEND_FN function
-* :jira:`ZEP-1177` - Reduce Zephyr's Dependency on Host Tools
-* :jira:`ZEP-1179` - Build issues when compiling with LLVM from ISSM (icx)
-* :jira:`ZEP-1189` - SoC I2C peripheral of the Quark SE cannot be used from the ARC core
-* :jira:`ZEP-1190` - SoC SPI peripheral of the Quark SE cannot be used from the ARC core
-* :jira:`ZEP-1222` - Add save/restore support to ARC core
-* :jira:`ZEP-1223` - Add save/restore support to arcv2_irq_unit
-* :jira:`ZEP-1224` - Add save/restore support to arcv2_timer_0/sys_clock
-* :jira:`ZEP-1230` - Optimize interrupt return code on ARC.
-* :jira:`ZEP-1233` - mbedDTLS DTLS client stability does not work on top of the tree for the net branch
-* :jira:`ZEP-1251` - Abstract driver re-entrancy code
-* :jira:`ZEP-1267` - Echo server crashes upon reception of router advertisement
-* :jira:`ZEP-1276` - Move disk_access_* out of file system subsystem
-* :jira:`ZEP-1283` - compile option to skip gpio toggle in samples/power/power_mgr
-* :jira:`ZEP-1284` - Remove arch/arm/core/gdb_stub.S and all the abstractions it introduced
-* :jira:`ZEP-1288` - Define _arc_v2_irq_unit device
-* :jira:`ZEP-1292` - Update external mbed TLS library to latest version (2.4.0)
-* :jira:`ZEP-1300` - ARM LTD V2M Beetle Support [Phase 2]
-* :jira:`ZEP-1304` - Define device tree bindings for NXP Kinetis K64F
-* :jira:`ZEP-1305` - Add DTS/DTB targets to build infrastructure
-* :jira:`ZEP-1306` - Create DTS/DTB parser
-* :jira:`ZEP-1307` - Plumbing the DTS configuration
-* :jira:`ZEP-1308` - zephyr thread function k_sleep doesn't work with nrf51822
-* :jira:`ZEP-1320` - Update Architecture Porting Guide
-* :jira:`ZEP-1321` - Glossary of Terms needs updating
-* :jira:`ZEP-1323` - Eliminate references to fiber, task, and nanokernel under ./include
-* :jira:`ZEP-1324` - Get rid of references to CONFIG_NANOKERNEL
-* :jira:`ZEP-1325` - Eliminate TICKLESS_IDLE_SUPPORTED option
-* :jira:`ZEP-1327` - Eliminate obsolete kernel directories
-* :jira:`ZEP-1329` - Rename kernel APIs that have nano\_ prefixes
-* :jira:`ZEP-1334` - Add make debug support for QEMU-based boards
-* :jira:`ZEP-1337` - Relocate event logger files
-* :jira:`ZEP-1338` - Update external fs with new FATFS revision 0.12b
-* :jira:`ZEP-1342` - legacy/kernel/test_early_sleep/ fails on EMSK
-* :jira:`ZEP-1347` - sys_bitfield_*() take unsigned long* vs memaddr_t
-* :jira:`ZEP-1351` - FDRM k64f SPI does not work
-* :jira:`ZEP-1355` - Connection Failed to be Established
-* :jira:`ZEP-1357` - iot/dns: Client is broken
-* :jira:`ZEP-1358` - BMI160 accelerometer gives 0 on all axes
-* :jira:`ZEP-1361` - IP stack is broken
-* :jira:`ZEP-1363` - Missing wiki board support page for arm/arduino_101_ble
-* :jira:`ZEP-1365` - Missing wiki board support page for arm/c3200_launchxl
-* :jira:`ZEP-1370` - There's a wiki page for arduino_due but no zephyr/boards support folder
-* :jira:`ZEP-1374` - Add ksdk spi shim driver
-* :jira:`ZEP-1387` - Add a driver for Atmel ataes132a HW Crypto module
-* :jira:`ZEP-1389` - Add support for KW41 SoC
-* :jira:`ZEP-1390` - Add support for FRDM-KW41Z
-* :jira:`ZEP-1393` - Add ksdk pinmux driver
-* :jira:`ZEP-1394` - Add ksdk gpio driver
-* :jira:`ZEP-1395` - Add data ready trigger to FXOS8700 driver
-* :jira:`ZEP-1401` - Enhance ready queue cache and interrupt exit code to reduce interrupt latency.
-* :jira:`ZEP-1403` - remove CONFIG_OMIT_FRAME_POINTER from ARC boards
-* :jira:`ZEP-1405` - function l2cap_br_conn_req in /subsys/bluetooth/host/l2cap_br.c references uninitialized pointer
-* :jira:`ZEP-1406` - Update sensor driver paths in wiki
-* :jira:`ZEP-1408` - quark_se_c1000_ss enter_arc_state() might need cc and memory clobber
-* :jira:`ZEP-1411` - Deprecate device_sync_call API and use semaphore directly
-* :jira:`ZEP-1413` - [ARC] test/legacy/kernel/test_tickless/microkernel fails to build
-* :jira:`ZEP-1415` - drivers/timer/* code comments still refer to micro/nano kernel
-* :jira:`ZEP-1418` - Add support for Nordic nRF52840 and its DK
-* :jira:`ZEP-1419` - SYS_LOG macros cause potentially bad behavior due to printk/printf selection
-* :jira:`ZEP-1420` - Make the time spent with interrupts disabled deterministic
-* :jira:`ZEP-1421` - BMI160 gyroscope driver stops reporting after 1-5 minutes
-* :jira:`ZEP-1422` - Arduino_101 doesn't response ipv6 ping request after enable echo_client ipv6
-* :jira:`ZEP-1427` - wpanusb dongle / 15.4 communication instability
-* :jira:`ZEP-1429` - NXP MCR20A Driver
-* :jira:`ZEP-1432` - ksdk pinmux driver should expose the public pinmux API
-* :jira:`ZEP-1434` - menuconfig screen shots show nanokernel options
-* :jira:`ZEP-1437` - AIO: Fail to retrieve pending interrupt in ISR
-* :jira:`ZEP-1440` - Kconfig choice for MINIMAL_LIBC vs NEWLIB_LIBC is not selectable
-* :jira:`ZEP-1442` - Samples/net/dhcpv4_client: Build fail as No rule to make target prj\_.conf
-* :jira:`ZEP-1443` - Samples/net/zperf: Build fail as net_private.h can not be found
-* :jira:`ZEP-1448` - Samples/net/mbedtls_sslclient:Build fail as net/ip_buf.h can not be found
-* :jira:`ZEP-1449` - samples: logger_hook
-* :jira:`ZEP-1456` - Asserts on nrf51 running Bluetooth hci_uart sample
-* :jira:`ZEP-1457` - Add SPDX Tags to Zephyr license boilerplate
-* :jira:`ZEP-1460` - Sanity check reports some qemu step failures as 'build_error'
-* :jira:`ZEP-1461` - Add zephyr support to openocd upstream
-* :jira:`ZEP-1467` - Cleanup misc/ and move features to subsystems in subsys/
-* :jira:`ZEP-1473` - ARP cache confused by use of gateway.
-* :jira:`ZEP-1474` - BLE Connection Parameter Request/Response Processing
-* :jira:`ZEP-1475` - k_free documentation should specify that NULL is valid
-* :jira:`ZEP-1476` - echo_client display port unreachable
-* :jira:`ZEP-1480` - Update supported distros in getting started guide
-* :jira:`ZEP-1481` - Bluetooth fails to init
-* :jira:`ZEP-1483` - H:4 HCI driver (h4.c) should rely on UART flow control to avoid dropping packets
-* :jira:`ZEP-1487` - I2C_SS: I2C doesn't set device busy before starting data transfer
-* :jira:`ZEP-1488` - SPI_SS: SPI doesn't set device busy before starting data transfer
-* :jira:`ZEP-1489` - [GATT] Nested Long Characteristic Value Reliable Writes
-* :jira:`ZEP-1490` - [PTS] TC_CONN_CPUP_BV_04_C test case is failing
-* :jira:`ZEP-1492` - Add Atmel SAM family GMAC Ethernet driver
-* :jira:`ZEP-1493` - Zephyr project documentation copyright
-* :jira:`ZEP-1495` - Networking API details documentation is missing
-* :jira:`ZEP-1496` - gpio_pin_enable_callback error
-* :jira:`ZEP-1497` - Cortex-M0 port exception and interrupt priority setting and getting is broken
-* :jira:`ZEP-1507` - fxos8700 broken gpio_callback implementation
-* :jira:`ZEP-1512` - doc-theme has its own conf.py
-* :jira:`ZEP-1514` - samples/bluetooth/ipsp build fail: net/ip_buf.h No such file or directory
-* :jira:`ZEP-1525` - driver: gpio: GPIO driver still uses nano_timer
-* :jira:`ZEP-1532` - Wrong accelerometer readings
-* :jira:`ZEP-1536` - Convert documentation of PWM samples to RST
-* :jira:`ZEP-1537` - Convert documentation of power management samples to RST
-* :jira:`ZEP-1538` - Convert documentation of zoap samples to RST
-* :jira:`ZEP-1539` - Create documentation in RST for all networking samples
-* :jira:`ZEP-1540` - Convert Bluetooth samples to RST
-* :jira:`ZEP-1542` - Multi Sessions HTTP Server sample
-* :jira:`ZEP-1543` - HTTP Server sample with basic authentication
-* :jira:`ZEP-1544` - Arduino_101 doesn't respond to ipv6 ping request after enable echo_server ipv6
-* :jira:`ZEP-1545` - AON Counter : ISR triggered twice on ARC
-* :jira:`ZEP-1546` - Bug in Zephyr OS high-precision timings sub-system (function sys_cycle_get_32())
-* :jira:`ZEP-1547` - Add support for H7 crypto function and CT2 SMP auth flag
-* :jira:`ZEP-1548` - Python script invocation is inconsistent
-* :jira:`ZEP-1549` - k_cpu_sleep_mode unaligned byte address
-* :jira:`ZEP-1554` - Xtensa integration
-* :jira:`ZEP-1557` - RISC V Port
-* :jira:`ZEP-1558` - Support of user private data pointer in Timer expiry function
-* :jira:`ZEP-1559` - Implement _tsc_read for ARC architecture
-* :jira:`ZEP-1562` - echo_server/echo_client examples hang randomly after some time of operation
-* :jira:`ZEP-1563` - move board documentation for NRF51/NRF52 back to git tree
-* :jira:`ZEP-1564` - 6lo uncompress_IPHC_header overwrites IPHC fields
-* :jira:`ZEP-1566` - WDT: Interrupt is triggered multiple times
-* :jira:`ZEP-1569` - net/tcp: TCP in server mode doesn't support multiple concurrent connections
-* :jira:`ZEP-1570` - net/tcp: TCP in server mode is unable to close client connections
-* :jira:`ZEP-1571` - Update "Changes from Version 1 Kernel" to include a "How-To Port Apps" section
-* :jira:`ZEP-1572` - Update QMSI to 1.4
-* :jira:`ZEP-1573` - net/tcp: User provided data in net_context_recv is not passed to callback
-* :jira:`ZEP-1574` - Samples/net/dhcpv4_client: Build fail as undefined reference to net_mgmt_add_event_callback
-* :jira:`ZEP-1579` - external links to zephyr technical docs are broken
-* :jira:`ZEP-1581` - [nRF52832] Blinky hangs after some minutes
-* :jira:`ZEP-1583` - ARC: warning: unmet direct dependencies (SOC_RISCV32_PULPINO || SOC_RISCV32_QEMU)
-* :jira:`ZEP-1585` - legacy.h should be disabled in kernel.h with CONFIG_LEGACY_KERNEL=n
-* :jira:`ZEP-1587` - sensor.h still uses legacy APIs and structs
-* :jira:`ZEP-1588` - I2C doesn't work on Arduino 101
-* :jira:`ZEP-1589` - Define yaml descriptions for UART devices
-* :jira:`ZEP-1590` - echo_server run on FRDM-K64F displays BUS FAULT
-* :jira:`ZEP-1591` - wiki: add Networking section and point https://wiki.zephyrproject.org/view/Network_Interfaces
-* :jira:`ZEP-1592` - echo-server does not build with newlib
-* :jira:`ZEP-1593` - /scripts/sysgen should create output using SPDX licensing tag
-* :jira:`ZEP-1598` - samples/philosophers build failed unexpectedly @quark_d2000 section noinit will not fit in region RAM
-* :jira:`ZEP-1601` - Console over Telnet
-* :jira:`ZEP-1602` - IPv6 ping fails using sample application echo_server on FRDM-K64F
-* :jira:`ZEP-1611` - Hardfault after a few echo requests (IPv6 over BLE)
-* :jira:`ZEP-1614` - Use correct i2c device driver name
-* :jira:`ZEP-1616` - Mix up between "network address" and "socket address" concepts in declaration of net_addr_pton()
-* :jira:`ZEP-1617` - mbedTLS server/client failing to run on qemu
-* :jira:`ZEP-1619` - Default value of NET_NBUF_RX_COUNT is too low, causes lock up on startup
-* :jira:`ZEP-1623` - (Parts) of Networking docs still refer to 1.5 world model (with fibers and tasks) and otherwise not up to date
-* :jira:`ZEP-1626` - SPI: spi cannot work in CPHA mode @ ARC
-* :jira:`ZEP-1632` - TCP ACK packet should not be forwarded to application recv cb.
-* :jira:`ZEP-1635` - MCR20A driver unstable
-* :jira:`ZEP-1638` - No (public) analog of inet_ntop()
-* :jira:`ZEP-1644` - Incoming connection handling for UDP is not exactly correct
-* :jira:`ZEP-1645` - API to wait on multiple kernel objects
-* :jira:`ZEP-1648` - Update links to wiki pages for board info back into the web docs
-* :jira:`ZEP-1650` - make clean (or pristine) is not removing all artifacts of document generation
-* :jira:`ZEP-1651` - i2c_dw malfunctioning due to various changes.
-* :jira:`ZEP-1653` - build issue when compiling with LLVM in ISSM (altmacro)
-* :jira:`ZEP-1654` - Build issues when compiling with LLVM(unknown attribute '_alloc_align_)
-* :jira:`ZEP-1655` - Build issues when compiling with LLVM(memory pool)
-* :jira:`ZEP-1656` - IPv6 over BLE no longer works after commit 2e9fd88
-* :jira:`ZEP-1657` - Zoap doxygen documentation needs to be perfected
-* :jira:`ZEP-1658` - IPv6 TCP low on buffers, stops responding after about 5 requests
-* :jira:`ZEP-1662` - zoap_packet_get_payload() should return the payload length
-* :jira:`ZEP-1663` - sanitycheck overrides user's environment for CCACHE
-* :jira:`ZEP-1665` - pinmux: missing default pinmux driver config for quark_se_ss
-* :jira:`ZEP-1669` - API documentation does not follow in-code documentation style
-* :jira:`ZEP-1672` - flash: Flash device binding failed on Arduino_101_sss
-* :jira:`ZEP-1674` - frdm_k64f: With Ethernet driver enabled, application can't start up without connected network cable
-* :jira:`ZEP-1677` - SDK: BLE cannot be initialized/advertised with CONFIG_ARC_INIT=y on Arduino 101
-* :jira:`ZEP-1681` - Save/restore debug registers during soc_sleep/soc_deep_sleep in c1000
-* :jira:`ZEP-1692` - [PTS] GATT/SR/GPA/BV-11-C fails
-* :jira:`ZEP-1701` - Provide an HTTP API
-* :jira:`ZEP-1704` - BMI160 samples fails to run
-* :jira:`ZEP-1706` - Barebone Panther board support
-* :jira:`ZEP-1707` - [PTS] 7 SM/MAS cases fail
-* :jira:`ZEP-1708` - [PTS] SM/MAS/PKE/BI-01-C fails
-* :jira:`ZEP-1709` - [PTS] SM/MAS/PKE/BI-02-C fails
-* :jira:`ZEP-1710` - Add TinyTILE board support
-* :jira:`ZEP-1713` - xtensa: correct all checkpatch issues
-* :jira:`ZEP-1716` - HTTP server sample that does not support up to 10 concurrent sessions.
-* :jira:`ZEP-1717` - GPIO: GPIO LEVEL interrupt cannot work well in deep sleep mode
-* :jira:`ZEP-1723` - Warnings in Network code/ MACROS, when built with ISSM's llvm/icx compiler
-* :jira:`ZEP-1732` - sample of zoap_server runs error.
-* :jira:`ZEP-1733` - Work on ZEP-686 led to regressions in docs on integration with 3rd-party code
-* :jira:`ZEP-1745` - Bluetooth samples build failure
-* :jira:`ZEP-1753` - sample of dhcpv4_client runs error on Arduino 101
-* :jira:`ZEP-1754` - sample of coaps_server was tested failed on qemu
-* :jira:`ZEP-1756` - net apps: [-Wpointer-sign] build warning raised when built with ISSM's llvm/icx compiler
-* :jira:`ZEP-1758` - PLL2 is not correctly enabled in STM32F10x connectivity line SoC
-* :jira:`ZEP-1763` - Nordic RTC timer driver not correct with tickless idle
-* :jira:`ZEP-1764` - samples: sample cases use hard code device name, such as "GPIOB" "I2C_0"
-* :jira:`ZEP-1768` - samples: cases miss testcase.ini
-* :jira:`ZEP-1774` - Malformed packet included with IPv6 over 802.15.4
-* :jira:`ZEP-1778` - tests/power: multicore case won't work as expected
-* :jira:`ZEP-1786` - TCP does not work on Arduino 101 board.
-* :jira:`ZEP-1787` - kernel event logger build failed with "CONFIG_LEGACY_KERNEL=n"
-* :jira:`ZEP-1789` - ARC: "samples/logger-hook" crashed __memory_error from sys_ring_buf_get
-* :jira:`ZEP-1799` - timeout_order_test _ASSERT_VALID_PRIO failed
-* :jira:`ZEP-1803` - Error occurs when exercising dma_transfer_stop
-* :jira:`ZEP-1806` - Build warnings with LLVM/icx (gdb_server)
-* :jira:`ZEP-1809` - Build error in net/ip with LLVM/icx
-* :jira:`ZEP-1810` - Build failure in net/lib/zoap with LLVM/icx
-* :jira:`ZEP-1811` - Build error in net/ip/net_mgmt.c with LLVM/icx
-* :jira:`ZEP-1839` - LL_ASSERT in event_common_prepareA
-* :jira:`ZEP-1851` - Build warnings with obj_tracing
-* :jira:`ZEP-1852` - LL_ASSERT in isr_radio_state_close()
-* :jira:`ZEP-1855` - IP stack buffer allocation fails over time
-* :jira:`ZEP-1858` - Zephyr NATS client fails to respond to server MSG
-* :jira:`ZEP-1864` - llvm icx build warning in tests/drivers/uart/*
-* :jira:`ZEP-1872` - samples/net: the HTTP client sample app must run on QEMU x86
-* :jira:`ZEP-1877` - samples/net: the coaps_server sample app runs failed on Arduino 101
-* :jira:`ZEP-1883` - Enabling Console on ARC Genuino 101
-* :jira:`ZEP-1890` - Bluetooth IPSP sample: Too small user data size
+* ``ZEP-19`` - IPSP node support
+* ``ZEP-145`` - no 'make flash' for Arduino Due
+* ``ZEP-328`` - HW Encryption Abstraction
+* ``ZEP-359`` - Move QEMU handling to a central location
+* ``ZEP-365`` - Zephyr's MQTT library
+* ``ZEP-437`` - TCP/IP API
+* ``ZEP-513`` - extern declarations of small microkernel objects in designated sections require __attribute__((section)) in gp-enabled systems
+* ``ZEP-591`` - MQTT Port to New IP Stack
+* ``ZEP-604`` - In coap_server sample app, CoAP resource separate is not able to send separate response
+* ``ZEP-613`` - TCP/UDP client and server mode functionality
+* ``ZEP-641`` - Bluetooth Eddystone sample does not correctly implement Eddystone beacon
+* ``ZEP-648`` - New CoAP Implementation
+* ``ZEP-664`` - Extend spi_qmsi_ss driver to support save/restore peripheral context
+* ``ZEP-665`` - Extend gpio_qmsi_ss driver to support save/restore peripheral context
+* ``ZEP-666`` - Extend i2c_qmsi_ss driver to support save/restore peripheral context
+* ``ZEP-667`` - Extend adc_qmsi_ss driver to support save/restore peripheral context
+* ``ZEP-686`` - docs: Info in Application Development Primer and Developing an Application and the Build System is largely duplicated
+* ``ZEP-706`` - cannot set debug breakpoints on ARC side of Arduino 101
+* ``ZEP-719`` - Add ksdk uart shim driver
+* ``ZEP-734`` - Port AES-CMAC-PRF-128 [RFC 4615] encryption library for Thread support
+* ``ZEP-742`` - nRF5x Series: System Clock driver using NRF_RTC
+* ``ZEP-744`` - USB WebUSB
+* ``ZEP-748`` - Enable mbedtls_sslclient sample to run on quark se board
+* ``ZEP-759`` - Add preliminary support for Atmel SAM E70 (Cortex-M7) chipset family and SAM E70 Xplained board
+* ``ZEP-788`` - UDP
+* ``ZEP-789`` - IPv4
+* ``ZEP-790`` - ICMPv4
+* ``ZEP-791`` - TCP
+* ``ZEP-792`` - ARP
+* ``ZEP-793`` - DNS Resolver
+* ``ZEP-794`` - Requirements for Internet Hosts - Communication Layers
+* ``ZEP-796`` - DHCPv4
+* ``ZEP-798`` - IPv6
+* ``ZEP-799`` - HTTP over TLS
+* ``ZEP-801`` - DNS Extensions to support IPv6
+* ``ZEP-804`` - IPv6 Addressing Architecture
+* ``ZEP-805`` - Internet Control Message Protocol (ICMP) v6
+* ``ZEP-807`` - Neighbor Discovery for IPv6
+* ``ZEP-808`` - IPv6 Stateless Autoconfiguration (SLAAC)
+* ``ZEP-809`` - IPv6 over 802.15.4
+* ``ZEP-811`` - The Trickle Algorithm
+* ``ZEP-812`` - Compression Format for IPv6 over 802.15.4
+* ``ZEP-813`` - RPL: IPv6 Routing Protocol
+* ``ZEP-814`` - Routing Metrics used in Path Selection
+* ``ZEP-815`` - Objective Function Zero for RPL
+* ``ZEP-816`` - Minimum Rank with Hysteresis (RPL)
+* ``ZEP-818`` - CoAP working over the new IP stack
+* ``ZEP-820`` - HTTP v1.1 Server Sample
+* ``ZEP-823`` - New IP Stack - Documentation
+* ``ZEP-824`` - Network Device Driver Porting Guide
+* ``ZEP-825`` - Porting guide for old-to-new IP Stack APIs
+* ``ZEP-827`` - HTTP Client sample application
+* ``ZEP-830`` - ICMPv6 Parameter Problem Support
+* ``ZEP-832`` - Hop-by-Hop option handling
+* ``ZEP-847`` - Network protocols must be moved to subsys/net/lib
+* ``ZEP-854`` - CoAP with DTLS sample
+* ``ZEP-859`` - Migrate ENC28J60 driver to YAIP IP stack
+* ``ZEP-865`` - convert filesystem sample to a runnable test
+* ``ZEP-872`` - Unable to flash Zephyr on Arduino 101 using Ubuntu and following wiki instructions
+* ``ZEP-873`` - DMA API Update
+* ``ZEP-875`` - 6LoWPAN - Context based compression support
+* ``ZEP-876`` - 6LoWPAN - Offset based Reassembly of 802.15.4 packets
+* ``ZEP-879`` - 6LoWPAN - Stateless Address Autoconfiguration
+* ``ZEP-882`` - 6LoWPAN - IPv6 Next Header Compression
+* ``ZEP-883`` - IP Stack L2 Interface Management API
+* ``ZEP-884`` - 802.15.4 - CSMA-CA Radio protocol support
+* ``ZEP-885`` - 802.15.4 - Beacon frame support
+* ``ZEP-886`` - 802.15.4 - MAC command frame support
+* ``ZEP-887`` - 802.15.4 - Management service: RFD level support
+* ``ZEP-911`` - Refine thread priorities & locking
+* ``ZEP-919`` - Purge obsolete microkernel & nanokernel code
+* ``ZEP-929`` - Verify the preempt-thread-only and coop-thread-only configurations
+* ``ZEP-931`` - Finalize kernel file naming & locations
+* ``ZEP-936`` - Adapt drivers to unified kernel
+* ``ZEP-937`` - Adapt networking to unified kernel
+* ``ZEP-946`` - Galileo Gen1 board support dropped?
+* ``ZEP-951`` - CONFIG_GDB_INFO build not working on ARM
+* ``ZEP-953`` - CONFIG_HPET_TIMER_DEBUG build warning
+* ``ZEP-958`` - simplify pinmux interface and merge the pinmux_dev into one single API
+* ``ZEP-964`` - Add a (hidden?) Kconfig option for disabling legacy API
+* ``ZEP-975`` - DNS client port to new IP stack
+* ``ZEP-1012`` - NATS client port to new IP stack
+* ``ZEP-1038`` - Hard real-time interrupt support
+* ``ZEP-1060`` - Contributor guide for documentation missing
+* ``ZEP-1103`` - Propose and implement synchronization flow for multicore power management
+* ``ZEP-1165`` - support enums as IRQ line argument in IRQ_CONNECT()
+* ``ZEP-1172`` - Update logger Api to allow using a hook for SYS_LOG_BACKEND_FN function
+* ``ZEP-1177`` - Reduce Zephyr's Dependency on Host Tools
+* ``ZEP-1179`` - Build issues when compiling with LLVM from ISSM (icx)
+* ``ZEP-1189`` - SoC I2C peripheral of the Quark SE cannot be used from the ARC core
+* ``ZEP-1190`` - SoC SPI peripheral of the Quark SE cannot be used from the ARC core
+* ``ZEP-1222`` - Add save/restore support to ARC core
+* ``ZEP-1223`` - Add save/restore support to arcv2_irq_unit
+* ``ZEP-1224`` - Add save/restore support to arcv2_timer_0/sys_clock
+* ``ZEP-1230`` - Optimize interrupt return code on ARC.
+* ``ZEP-1233`` - mbedDTLS DTLS client stability does not work on top of the tree for the net branch
+* ``ZEP-1251`` - Abstract driver re-entrancy code
+* ``ZEP-1267`` - Echo server crashes upon reception of router advertisement
+* ``ZEP-1276`` - Move disk_access_* out of file system subsystem
+* ``ZEP-1283`` - compile option to skip gpio toggle in samples/power/power_mgr
+* ``ZEP-1284`` - Remove arch/arm/core/gdb_stub.S and all the abstractions it introduced
+* ``ZEP-1288`` - Define _arc_v2_irq_unit device
+* ``ZEP-1292`` - Update external mbed TLS library to latest version (2.4.0)
+* ``ZEP-1300`` - ARM LTD V2M Beetle Support [Phase 2]
+* ``ZEP-1304`` - Define device tree bindings for NXP Kinetis K64F
+* ``ZEP-1305`` - Add DTS/DTB targets to build infrastructure
+* ``ZEP-1306`` - Create DTS/DTB parser
+* ``ZEP-1307`` - Plumbing the DTS configuration
+* ``ZEP-1308`` - zephyr thread function k_sleep doesn't work with nrf51822
+* ``ZEP-1320`` - Update Architecture Porting Guide
+* ``ZEP-1321`` - Glossary of Terms needs updating
+* ``ZEP-1323`` - Eliminate references to fiber, task, and nanokernel under ./include
+* ``ZEP-1324`` - Get rid of references to CONFIG_NANOKERNEL
+* ``ZEP-1325`` - Eliminate TICKLESS_IDLE_SUPPORTED option
+* ``ZEP-1327`` - Eliminate obsolete kernel directories
+* ``ZEP-1329`` - Rename kernel APIs that have nano\_ prefixes
+* ``ZEP-1334`` - Add make debug support for QEMU-based boards
+* ``ZEP-1337`` - Relocate event logger files
+* ``ZEP-1338`` - Update external fs with new FATFS revision 0.12b
+* ``ZEP-1342`` - legacy/kernel/test_early_sleep/ fails on EMSK
+* ``ZEP-1347`` - sys_bitfield_*() take unsigned long* vs memaddr_t
+* ``ZEP-1351`` - FDRM k64f SPI does not work
+* ``ZEP-1355`` - Connection Failed to be Established
+* ``ZEP-1357`` - iot/dns: Client is broken
+* ``ZEP-1358`` - BMI160 accelerometer gives 0 on all axes
+* ``ZEP-1361`` - IP stack is broken
+* ``ZEP-1363`` - Missing wiki board support page for arm/arduino_101_ble
+* ``ZEP-1365`` - Missing wiki board support page for arm/c3200_launchxl
+* ``ZEP-1370`` - There's a wiki page for arduino_due but no zephyr/boards support folder
+* ``ZEP-1374`` - Add ksdk spi shim driver
+* ``ZEP-1387`` - Add a driver for Atmel ataes132a HW Crypto module
+* ``ZEP-1389`` - Add support for KW41 SoC
+* ``ZEP-1390`` - Add support for FRDM-KW41Z
+* ``ZEP-1393`` - Add ksdk pinmux driver
+* ``ZEP-1394`` - Add ksdk gpio driver
+* ``ZEP-1395`` - Add data ready trigger to FXOS8700 driver
+* ``ZEP-1401`` - Enhance ready queue cache and interrupt exit code to reduce interrupt latency.
+* ``ZEP-1403`` - remove CONFIG_OMIT_FRAME_POINTER from ARC boards
+* ``ZEP-1405`` - function l2cap_br_conn_req in /subsys/bluetooth/host/l2cap_br.c references uninitialized pointer
+* ``ZEP-1406`` - Update sensor driver paths in wiki
+* ``ZEP-1408`` - quark_se_c1000_ss enter_arc_state() might need cc and memory clobber
+* ``ZEP-1411`` - Deprecate device_sync_call API and use semaphore directly
+* ``ZEP-1413`` - [ARC] test/legacy/kernel/test_tickless/microkernel fails to build
+* ``ZEP-1415`` - drivers/timer/* code comments still refer to micro/nano kernel
+* ``ZEP-1418`` - Add support for Nordic nRF52840 and its DK
+* ``ZEP-1419`` - SYS_LOG macros cause potentially bad behavior due to printk/printf selection
+* ``ZEP-1420`` - Make the time spent with interrupts disabled deterministic
+* ``ZEP-1421`` - BMI160 gyroscope driver stops reporting after 1-5 minutes
+* ``ZEP-1422`` - Arduino_101 doesn't response ipv6 ping request after enable echo_client ipv6
+* ``ZEP-1427`` - wpanusb dongle / 15.4 communication instability
+* ``ZEP-1429`` - NXP MCR20A Driver
+* ``ZEP-1432`` - ksdk pinmux driver should expose the public pinmux API
+* ``ZEP-1434`` - menuconfig screen shots show nanokernel options
+* ``ZEP-1437`` - AIO: Fail to retrieve pending interrupt in ISR
+* ``ZEP-1440`` - Kconfig choice for MINIMAL_LIBC vs NEWLIB_LIBC is not selectable
+* ``ZEP-1442`` - Samples/net/dhcpv4_client: Build fail as No rule to make target prj\_.conf
+* ``ZEP-1443`` - Samples/net/zperf: Build fail as net_private.h can not be found
+* ``ZEP-1448`` - Samples/net/mbedtls_sslclient:Build fail as net/ip_buf.h can not be found
+* ``ZEP-1449`` - samples: logger_hook
+* ``ZEP-1456`` - Asserts on nrf51 running Bluetooth hci_uart sample
+* ``ZEP-1457`` - Add SPDX Tags to Zephyr license boilerplate
+* ``ZEP-1460`` - Sanity check reports some qemu step failures as 'build_error'
+* ``ZEP-1461`` - Add zephyr support to openocd upstream
+* ``ZEP-1467`` - Cleanup misc/ and move features to subsystems in subsys/
+* ``ZEP-1473`` - ARP cache confused by use of gateway.
+* ``ZEP-1474`` - BLE Connection Parameter Request/Response Processing
+* ``ZEP-1475`` - k_free documentation should specify that NULL is valid
+* ``ZEP-1476`` - echo_client display port unreachable
+* ``ZEP-1480`` - Update supported distros in getting started guide
+* ``ZEP-1481`` - Bluetooth fails to init
+* ``ZEP-1483`` - H:4 HCI driver (h4.c) should rely on UART flow control to avoid dropping packets
+* ``ZEP-1487`` - I2C_SS: I2C doesn't set device busy before starting data transfer
+* ``ZEP-1488`` - SPI_SS: SPI doesn't set device busy before starting data transfer
+* ``ZEP-1489`` - [GATT] Nested Long Characteristic Value Reliable Writes
+* ``ZEP-1490`` - [PTS] TC_CONN_CPUP_BV_04_C test case is failing
+* ``ZEP-1492`` - Add Atmel SAM family GMAC Ethernet driver
+* ``ZEP-1493`` - Zephyr project documentation copyright
+* ``ZEP-1495`` - Networking API details documentation is missing
+* ``ZEP-1496`` - gpio_pin_enable_callback error
+* ``ZEP-1497`` - Cortex-M0 port exception and interrupt priority setting and getting is broken
+* ``ZEP-1507`` - fxos8700 broken gpio_callback implementation
+* ``ZEP-1512`` - doc-theme has its own conf.py
+* ``ZEP-1514`` - samples/bluetooth/ipsp build fail: net/ip_buf.h No such file or directory
+* ``ZEP-1525`` - driver: gpio: GPIO driver still uses nano_timer
+* ``ZEP-1532`` - Wrong accelerometer readings
+* ``ZEP-1536`` - Convert documentation of PWM samples to RST
+* ``ZEP-1537`` - Convert documentation of power management samples to RST
+* ``ZEP-1538`` - Convert documentation of zoap samples to RST
+* ``ZEP-1539`` - Create documentation in RST for all networking samples
+* ``ZEP-1540`` - Convert Bluetooth samples to RST
+* ``ZEP-1542`` - Multi Sessions HTTP Server sample
+* ``ZEP-1543`` - HTTP Server sample with basic authentication
+* ``ZEP-1544`` - Arduino_101 doesn't respond to ipv6 ping request after enable echo_server ipv6
+* ``ZEP-1545`` - AON Counter : ISR triggered twice on ARC
+* ``ZEP-1546`` - Bug in Zephyr OS high-precision timings sub-system (function sys_cycle_get_32())
+* ``ZEP-1547`` - Add support for H7 crypto function and CT2 SMP auth flag
+* ``ZEP-1548`` - Python script invocation is inconsistent
+* ``ZEP-1549`` - k_cpu_sleep_mode unaligned byte address
+* ``ZEP-1554`` - Xtensa integration
+* ``ZEP-1557`` - RISC V Port
+* ``ZEP-1558`` - Support of user private data pointer in Timer expiry function
+* ``ZEP-1559`` - Implement _tsc_read for ARC architecture
+* ``ZEP-1562`` - echo_server/echo_client examples hang randomly after some time of operation
+* ``ZEP-1563`` - move board documentation for NRF51/NRF52 back to git tree
+* ``ZEP-1564`` - 6lo uncompress_IPHC_header overwrites IPHC fields
+* ``ZEP-1566`` - WDT: Interrupt is triggered multiple times
+* ``ZEP-1569`` - net/tcp: TCP in server mode doesn't support multiple concurrent connections
+* ``ZEP-1570`` - net/tcp: TCP in server mode is unable to close client connections
+* ``ZEP-1571`` - Update "Changes from Version 1 Kernel" to include a "How-To Port Apps" section
+* ``ZEP-1572`` - Update QMSI to 1.4
+* ``ZEP-1573`` - net/tcp: User provided data in net_context_recv is not passed to callback
+* ``ZEP-1574`` - Samples/net/dhcpv4_client: Build fail as undefined reference to net_mgmt_add_event_callback
+* ``ZEP-1579`` - external links to zephyr technical docs are broken
+* ``ZEP-1581`` - [nRF52832] Blinky hangs after some minutes
+* ``ZEP-1583`` - ARC: warning: unmet direct dependencies (SOC_RISCV32_PULPINO || SOC_RISCV32_QEMU)
+* ``ZEP-1585`` - legacy.h should be disabled in kernel.h with CONFIG_LEGACY_KERNEL=n
+* ``ZEP-1587`` - sensor.h still uses legacy APIs and structs
+* ``ZEP-1588`` - I2C doesn't work on Arduino 101
+* ``ZEP-1589`` - Define yaml descriptions for UART devices
+* ``ZEP-1590`` - echo_server run on FRDM-K64F displays BUS FAULT
+* ``ZEP-1591`` - wiki: add Networking section and point https://wiki.zephyrproject.org/view/Network_Interfaces
+* ``ZEP-1592`` - echo-server does not build with newlib
+* ``ZEP-1593`` - /scripts/sysgen should create output using SPDX licensing tag
+* ``ZEP-1598`` - samples/philosophers build failed unexpectedly @quark_d2000 section noinit will not fit in region RAM
+* ``ZEP-1601`` - Console over Telnet
+* ``ZEP-1602`` - IPv6 ping fails using sample application echo_server on FRDM-K64F
+* ``ZEP-1611`` - Hardfault after a few echo requests (IPv6 over BLE)
+* ``ZEP-1614`` - Use correct i2c device driver name
+* ``ZEP-1616`` - Mix up between "network address" and "socket address" concepts in declaration of net_addr_pton()
+* ``ZEP-1617`` - mbedTLS server/client failing to run on qemu
+* ``ZEP-1619`` - Default value of NET_NBUF_RX_COUNT is too low, causes lock up on startup
+* ``ZEP-1623`` - (Parts) of Networking docs still refer to 1.5 world model (with fibers and tasks) and otherwise not up to date
+* ``ZEP-1626`` - SPI: spi cannot work in CPHA mode @ ARC
+* ``ZEP-1632`` - TCP ACK packet should not be forwarded to application recv cb.
+* ``ZEP-1635`` - MCR20A driver unstable
+* ``ZEP-1638`` - No (public) analog of inet_ntop()
+* ``ZEP-1644`` - Incoming connection handling for UDP is not exactly correct
+* ``ZEP-1645`` - API to wait on multiple kernel objects
+* ``ZEP-1648`` - Update links to wiki pages for board info back into the web docs
+* ``ZEP-1650`` - make clean (or pristine) is not removing all artifacts of document generation
+* ``ZEP-1651`` - i2c_dw malfunctioning due to various changes.
+* ``ZEP-1653`` - build issue when compiling with LLVM in ISSM (altmacro)
+* ``ZEP-1654`` - Build issues when compiling with LLVM(unknown attribute '_alloc_align_)
+* ``ZEP-1655`` - Build issues when compiling with LLVM(memory pool)
+* ``ZEP-1656`` - IPv6 over BLE no longer works after commit 2e9fd88
+* ``ZEP-1657`` - Zoap doxygen documentation needs to be perfected
+* ``ZEP-1658`` - IPv6 TCP low on buffers, stops responding after about 5 requests
+* ``ZEP-1662`` - zoap_packet_get_payload() should return the payload length
+* ``ZEP-1663`` - sanitycheck overrides user's environment for CCACHE
+* ``ZEP-1665`` - pinmux: missing default pinmux driver config for quark_se_ss
+* ``ZEP-1669`` - API documentation does not follow in-code documentation style
+* ``ZEP-1672`` - flash: Flash device binding failed on Arduino_101_sss
+* ``ZEP-1674`` - frdm_k64f: With Ethernet driver enabled, application can't start up without connected network cable
+* ``ZEP-1677`` - SDK: BLE cannot be initialized/advertised with CONFIG_ARC_INIT=y on Arduino 101
+* ``ZEP-1681`` - Save/restore debug registers during soc_sleep/soc_deep_sleep in c1000
+* ``ZEP-1692`` - [PTS] GATT/SR/GPA/BV-11-C fails
+* ``ZEP-1701`` - Provide an HTTP API
+* ``ZEP-1704`` - BMI160 samples fails to run
+* ``ZEP-1706`` - Barebone Panther board support
+* ``ZEP-1707`` - [PTS] 7 SM/MAS cases fail
+* ``ZEP-1708`` - [PTS] SM/MAS/PKE/BI-01-C fails
+* ``ZEP-1709`` - [PTS] SM/MAS/PKE/BI-02-C fails
+* ``ZEP-1710`` - Add TinyTILE board support
+* ``ZEP-1713`` - xtensa: correct all checkpatch issues
+* ``ZEP-1716`` - HTTP server sample that does not support up to 10 concurrent sessions.
+* ``ZEP-1717`` - GPIO: GPIO LEVEL interrupt cannot work well in deep sleep mode
+* ``ZEP-1723`` - Warnings in Network code/ MACROS, when built with ISSM's llvm/icx compiler
+* ``ZEP-1732`` - sample of zoap_server runs error.
+* ``ZEP-1733`` - Work on ZEP-686 led to regressions in docs on integration with 3rd-party code
+* ``ZEP-1745`` - Bluetooth samples build failure
+* ``ZEP-1753`` - sample of dhcpv4_client runs error on Arduino 101
+* ``ZEP-1754`` - sample of coaps_server was tested failed on qemu
+* ``ZEP-1756`` - net apps: [-Wpointer-sign] build warning raised when built with ISSM's llvm/icx compiler
+* ``ZEP-1758`` - PLL2 is not correctly enabled in STM32F10x connectivity line SoC
+* ``ZEP-1763`` - Nordic RTC timer driver not correct with tickless idle
+* ``ZEP-1764`` - samples: sample cases use hard code device name, such as "GPIOB" "I2C_0"
+* ``ZEP-1768`` - samples: cases miss testcase.ini
+* ``ZEP-1774`` - Malformed packet included with IPv6 over 802.15.4
+* ``ZEP-1778`` - tests/power: multicore case won't work as expected
+* ``ZEP-1786`` - TCP does not work on Arduino 101 board.
+* ``ZEP-1787`` - kernel event logger build failed with "CONFIG_LEGACY_KERNEL=n"
+* ``ZEP-1789`` - ARC: "samples/logger-hook" crashed __memory_error from sys_ring_buf_get
+* ``ZEP-1799`` - timeout_order_test _ASSERT_VALID_PRIO failed
+* ``ZEP-1803`` - Error occurs when exercising dma_transfer_stop
+* ``ZEP-1806`` - Build warnings with LLVM/icx (gdb_server)
+* ``ZEP-1809`` - Build error in net/ip with LLVM/icx
+* ``ZEP-1810`` - Build failure in net/lib/zoap with LLVM/icx
+* ``ZEP-1811`` - Build error in net/ip/net_mgmt.c with LLVM/icx
+* ``ZEP-1839`` - LL_ASSERT in event_common_prepareA
+* ``ZEP-1851`` - Build warnings with obj_tracing
+* ``ZEP-1852`` - LL_ASSERT in isr_radio_state_close()
+* ``ZEP-1855`` - IP stack buffer allocation fails over time
+* ``ZEP-1858`` - Zephyr NATS client fails to respond to server MSG
+* ``ZEP-1864`` - llvm icx build warning in tests/drivers/uart/*
+* ``ZEP-1872`` - samples/net: the HTTP client sample app must run on QEMU x86
+* ``ZEP-1877`` - samples/net: the coaps_server sample app runs failed on Arduino 101
+* ``ZEP-1883`` - Enabling Console on ARC Genuino 101
+* ``ZEP-1890`` - Bluetooth IPSP sample: Too small user data size
diff --git a/doc/releases/release-notes-1.8.rst b/doc/releases/release-notes-1.8.rst
index 7e03ff4..2f0cdb7 100644
--- a/doc/releases/release-notes-1.8.rst
+++ b/doc/releases/release-notes-1.8.rst
@@ -202,123 +202,123 @@
.. comment List derived from Jira query: ...
-* :jira:`ZEP-248` - Add a BOARD/SOC porting guide
-* :jira:`ZEP-339` - Tickless Kernel
-* :jira:`ZEP-540` - add APIs for asynchronous transfer callbacks
-* :jira:`ZEP-628` - Validate RPL Routing node support
-* :jira:`ZEP-638` - feature to consider: flag missing functionality at build time when possible
-* :jira:`ZEP-720` - Add MAX30101 heart rate sensor driver
-* :jira:`ZEP-828` - IPv6 - Multicast Join/Leave Support
-* :jira:`ZEP-843` - Unified assert/unrecoverable error infrastructure
-* :jira:`ZEP-888` - 802.15.4 - Security support
-* :jira:`ZEP-932` - Adapt kernel sample & test projects
-* :jira:`ZEP-948` - Revisit the timeslicing algorithm
-* :jira:`ZEP-973` - Remove deprecated API related to device PM functions and DEVICE\_ and SYS\_* macros
-* :jira:`ZEP-1028` - shrink k_block struct size
-* :jira:`ZEP-1032` - IPSP router role support
-* :jira:`ZEP-1169` - Sample mbedDTLS DTLS client stability on ethernet driver
-* :jira:`ZEP-1171` - Event group kernel APIs
-* :jira:`ZEP-1280` - Provide Event Queues Object
-* :jira:`ZEP-1313` - porting and user guides must include a security section
-* :jira:`ZEP-1326` - Clean up _THREAD_xxx APIs
-* :jira:`ZEP-1388` - Add support for KW40 SoC
-* :jira:`ZEP-1391` - Add support for Hexiwear KW40
-* :jira:`ZEP-1392` - Add FXAS21002 gyroscope sensor driver
-* :jira:`ZEP-1435` - Improve Quark SE C1000 ARC Floating Point Performance
-* :jira:`ZEP-1438` - AIO: AIO Comparator is not stable on D2000 and Arduino101
-* :jira:`ZEP-1463` - Add Zephyr Support in segger SystemView
-* :jira:`ZEP-1500` - net/mqtt: Test case for the MQTT high-level API
-* :jira:`ZEP-1528` - Provide template for multi-core applications
-* :jira:`ZEP-1529` - Unable to exit menuconfig
-* :jira:`ZEP-1530` - Hotkeys for the menu at the bottom of menuconfig sometimes doesn't work
-* :jira:`ZEP-1568` - Replace arm cortex_m scs and scb functionality with direct CMSIS-core calls
-* :jira:`ZEP-1586` - menuconfig: Backspace is broken
-* :jira:`ZEP-1599` - printk() support for the '-' indicator in format string (left justifier)
-* :jira:`ZEP-1607` - JSON encoding/decoding library
-* :jira:`ZEP-1621` - Stack Monitoring
-* :jira:`ZEP-1631` - Ability to use k_mem_pool_alloc (or similar API) from ISR
-* :jira:`ZEP-1684` - Add Atmel SAM family watchdog (WDT) driver
-* :jira:`ZEP-1695` - Support ADXL362 sensor
-* :jira:`ZEP-1698` - BME280 support for SPI communication
-* :jira:`ZEP-1711` - xtensa build defines Kconfigs with lowercase names
-* :jira:`ZEP-1718` - support for IPv6 fragmentation
-* :jira:`ZEP-1719` - TCP does not work with 6lo
-* :jira:`ZEP-1721` - many TinyCrypt test cases only run on ARM and x86
-* :jira:`ZEP-1722` - xtensa: TinyCrypt does not build
-* :jira:`ZEP-1735` - Controller to Host flow control
-* :jira:`ZEP-1759` - All python scripts needed for build should be moved to python 3 to minimize dependencies
-* :jira:`ZEP-1761` - K_MEM_POOL_DEFINE build error "invalid register name" when built with llvm/icx from ISSM toolchain
-* :jira:`ZEP-1769` - Implement Set Event Mask and LE Set Event Mask commands
-* :jira:`ZEP-1772` - re-introduce controller to host flow control
-* :jira:`ZEP-1776` - sending LE COC data from RX thread can lead to deadlock
-* :jira:`ZEP-1785` - Tinytile: Flashing not supported with this board
-* :jira:`ZEP-1788` - [REG] bt_enable: No HCI driver registered
-* :jira:`ZEP-1800` - Update external mbed TLS library to latest version (2.4.2)
-* :jira:`ZEP-1812` - Add tickless kernel support in HPET timer
-* :jira:`ZEP-1816` - Add tickless kernel support in LOAPIC timer
-* :jira:`ZEP-1817` - Add tickless kernel support in ARCV2 timer
-* :jira:`ZEP-1818` - Add tickless kernel support in cortex_m_systick timer
-* :jira:`ZEP-1821` - Update PM apps to use mili/micro seconds instead of ticks
-* :jira:`ZEP-1823` - Improved Benchmarks
-* :jira:`ZEP-1825` - Context Switching KPI
-* :jira:`ZEP-1836` - Expose current ecb_encrypt() as bt_encrypt() so host can directly access it
-* :jira:`ZEP-1856` - remove legacy micro/nano kernel APIs
-* :jira:`ZEP-1857` - Build warnings [-Wpointer-sign] with LLVM/icx (bluetooth_handsfree)
-* :jira:`ZEP-1866` - Add Atmel SAM family I2C (TWIHS) driver
-* :jira:`ZEP-1880` - "samples/grove/temperature": warning raised when generating configure file
-* :jira:`ZEP-1886` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/nbuf)
-* :jira:`ZEP-1887` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/drivers/spi/spi_basic_api)
-* :jira:`ZEP-1893` - openocd: 'make flash' works with Zephyr SDK only and fails for all other toolchains
-* :jira:`ZEP-1896` - [PTS] L2CAP/LE/CFC/BV-06-C
-* :jira:`ZEP-1899` - Missing board documentation for xtensa/xt-sim
-* :jira:`ZEP-1908` - Missing board documentation for arm/nucleo_96b_nitrogen
-* :jira:`ZEP-1910` - Missing board documentation for arm/96b_carbon
-* :jira:`ZEP-1927` - AIO: AIO_CMP_POL_FALL is triggered immediately after aio_cmp_configure
-* :jira:`ZEP-1935` - Packet loss make RPL mesh more vulnerable
-* :jira:`ZEP-1936` - tests/drivers/spi/spi_basic_api/testcase.ini#test_spi - Assertion Fail
-* :jira:`ZEP-1946` - Time to Next Event
-* :jira:`ZEP-1955` - Nested interrupts crash on Xtensa architecture
-* :jira:`ZEP-1959` - Add Atmel SAM family serial (UART) driver
-* :jira:`ZEP-1965` - net-tools HEAD is broken for QEMU/TAP
-* :jira:`ZEP-1966` - Doesn't seem to be able to both send and receive locally via local address
-* :jira:`ZEP-1968` - "make mrproper" removes top-level dts/ dir, makes ARM builds fail afterwards
-* :jira:`ZEP-1980` - Move app_kernel benchmark to unified kernel
-* :jira:`ZEP-1984` - net_nbuf_append(), net_nbuf_append_bytes() have data integrity problems
-* :jira:`ZEP-1990` - Basic support for the BBC micro:bit LED display
-* :jira:`ZEP-1993` - Flowcontrol Required for CDC_ACM
-* :jira:`ZEP-1995` - samples/subsys/console breaks xtensa build
-* :jira:`ZEP-1997` - Crash during startup if co-processors are present
-* :jira:`ZEP-2008` - Port tickless idle test to unified kernel and cleanup
-* :jira:`ZEP-2009` - Port test_sleep test to unified kernel and cleanup
-* :jira:`ZEP-2011` - Retrieve RPL node information through CoAP requests
-* :jira:`ZEP-2012` - Fault in networking stack for cores that can't access unaligned memory
-* :jira:`ZEP-2013` - dead object monitor code
-* :jira:`ZEP-2014` - Default samples/subsys/shell/shell fails to build on QEMU RISCv32 / NIOS2
-* :jira:`ZEP-2019` - Xtensa port does not compile if CONFIG_TICKLESS_IDLE is enabled
-* :jira:`ZEP-2027` - Bluetooth Peripheral Sample won't pair with certain Android devices
-* :jira:`ZEP-2029` - xtensa: irq_offload() doesn't work on XRC_D2PM
-* :jira:`ZEP-2033` - Channel Selection Algorithm #2
-* :jira:`ZEP-2034` - High Duty Cycle Non-Connectable Advertising
-* :jira:`ZEP-2037` - Malformed echo response
-* :jira:`ZEP-2048` - Change UART "baud-rate" property to "current-speed"
-* :jira:`ZEP-2051` - Move away from C99 types to zephyr defined types
-* :jira:`ZEP-2052` - arm: unhandled exceptions in thread take down entire system
-* :jira:`ZEP-2055` - Add README.rst in the root of the project for github
-* :jira:`ZEP-2057` - crash in tests/net/rpl on qemu_x86 causing intermittent sanitycheck failure
-* :jira:`ZEP-2061` - samples/net/dns_resolve networking setup/README is confusing
-* :jira:`ZEP-2064` - RFC: Making net_shell command handlers reusable
-* :jira:`ZEP-2065` - struct dns_addrinfo has unused fields
-* :jira:`ZEP-2066` - nitpick: SOCK_STREAM/SOCK_DGRAM values swapped compared to most OSes
-* :jira:`ZEP-2069` - samples: net: dhcpv4_client: runs failed on frdm k64f board
-* :jira:`ZEP-2070` - net pkt doesn't full unref after send a data form bluetooth's ipsp
-* :jira:`ZEP-2076` - samples: net: coaps_server: build failed
-* :jira:`ZEP-2077` - Fix IID when using CONFIG_NET_L2_BLUETOOTH_ZEP1656
-* :jira:`ZEP-2080` - No reply from RPL node after 20-30 minutes.
-* :jira:`ZEP-2092` - [NRF][BT] Makefile:946: recipe for target 'include/generated/generated_dts_board.h' failed
-* :jira:`ZEP-2114` - tests/kernel/fatal : Fail for QC1000/arc
-* :jira:`ZEP-2125` - Compilation error when UART1 port is enabled via menuconfig
-* :jira:`ZEP-2132` - Build samples/bluetooth/hci_uart fail
-* :jira:`ZEP-2138` - Static code scan (coverity) issues seen
-* :jira:`ZEP-2143` - Compilation Error on Windows 10 with MSYS2
-* :jira:`ZEP-2152` - Xtensa crashes on startup for cores with coprocessors
-* :jira:`ZEP-2178` - Static code scan (coverity) issues seen
+* ``ZEP-248`` - Add a BOARD/SOC porting guide
+* ``ZEP-339`` - Tickless Kernel
+* ``ZEP-540`` - add APIs for asynchronous transfer callbacks
+* ``ZEP-628`` - Validate RPL Routing node support
+* ``ZEP-638`` - feature to consider: flag missing functionality at build time when possible
+* ``ZEP-720`` - Add MAX30101 heart rate sensor driver
+* ``ZEP-828`` - IPv6 - Multicast Join/Leave Support
+* ``ZEP-843`` - Unified assert/unrecoverable error infrastructure
+* ``ZEP-888`` - 802.15.4 - Security support
+* ``ZEP-932`` - Adapt kernel sample & test projects
+* ``ZEP-948`` - Revisit the timeslicing algorithm
+* ``ZEP-973`` - Remove deprecated API related to device PM functions and DEVICE\_ and SYS\_* macros
+* ``ZEP-1028`` - shrink k_block struct size
+* ``ZEP-1032`` - IPSP router role support
+* ``ZEP-1169`` - Sample mbedDTLS DTLS client stability on ethernet driver
+* ``ZEP-1171`` - Event group kernel APIs
+* ``ZEP-1280`` - Provide Event Queues Object
+* ``ZEP-1313`` - porting and user guides must include a security section
+* ``ZEP-1326`` - Clean up _THREAD_xxx APIs
+* ``ZEP-1388`` - Add support for KW40 SoC
+* ``ZEP-1391`` - Add support for Hexiwear KW40
+* ``ZEP-1392`` - Add FXAS21002 gyroscope sensor driver
+* ``ZEP-1435`` - Improve Quark SE C1000 ARC Floating Point Performance
+* ``ZEP-1438`` - AIO: AIO Comparator is not stable on D2000 and Arduino101
+* ``ZEP-1463`` - Add Zephyr Support in segger SystemView
+* ``ZEP-1500`` - net/mqtt: Test case for the MQTT high-level API
+* ``ZEP-1528`` - Provide template for multi-core applications
+* ``ZEP-1529`` - Unable to exit menuconfig
+* ``ZEP-1530`` - Hotkeys for the menu at the bottom of menuconfig sometimes doesn't work
+* ``ZEP-1568`` - Replace arm cortex_m scs and scb functionality with direct CMSIS-core calls
+* ``ZEP-1586`` - menuconfig: Backspace is broken
+* ``ZEP-1599`` - printk() support for the '-' indicator in format string (left justifier)
+* ``ZEP-1607`` - JSON encoding/decoding library
+* ``ZEP-1621`` - Stack Monitoring
+* ``ZEP-1631`` - Ability to use k_mem_pool_alloc (or similar API) from ISR
+* ``ZEP-1684`` - Add Atmel SAM family watchdog (WDT) driver
+* ``ZEP-1695`` - Support ADXL362 sensor
+* ``ZEP-1698`` - BME280 support for SPI communication
+* ``ZEP-1711`` - xtensa build defines Kconfigs with lowercase names
+* ``ZEP-1718`` - support for IPv6 fragmentation
+* ``ZEP-1719`` - TCP does not work with 6lo
+* ``ZEP-1721`` - many TinyCrypt test cases only run on ARM and x86
+* ``ZEP-1722`` - xtensa: TinyCrypt does not build
+* ``ZEP-1735`` - Controller to Host flow control
+* ``ZEP-1759`` - All python scripts needed for build should be moved to python 3 to minimize dependencies
+* ``ZEP-1761`` - K_MEM_POOL_DEFINE build error "invalid register name" when built with llvm/icx from ISSM toolchain
+* ``ZEP-1769`` - Implement Set Event Mask and LE Set Event Mask commands
+* ``ZEP-1772`` - re-introduce controller to host flow control
+* ``ZEP-1776`` - sending LE COC data from RX thread can lead to deadlock
+* ``ZEP-1785`` - Tinytile: Flashing not supported with this board
+* ``ZEP-1788`` - [REG] bt_enable: No HCI driver registered
+* ``ZEP-1800`` - Update external mbed TLS library to latest version (2.4.2)
+* ``ZEP-1812`` - Add tickless kernel support in HPET timer
+* ``ZEP-1816`` - Add tickless kernel support in LOAPIC timer
+* ``ZEP-1817`` - Add tickless kernel support in ARCV2 timer
+* ``ZEP-1818`` - Add tickless kernel support in cortex_m_systick timer
+* ``ZEP-1821`` - Update PM apps to use mili/micro seconds instead of ticks
+* ``ZEP-1823`` - Improved Benchmarks
+* ``ZEP-1825`` - Context Switching KPI
+* ``ZEP-1836`` - Expose current ecb_encrypt() as bt_encrypt() so host can directly access it
+* ``ZEP-1856`` - remove legacy micro/nano kernel APIs
+* ``ZEP-1857`` - Build warnings [-Wpointer-sign] with LLVM/icx (bluetooth_handsfree)
+* ``ZEP-1866`` - Add Atmel SAM family I2C (TWIHS) driver
+* ``ZEP-1880`` - "samples/grove/temperature": warning raised when generating configure file
+* ``ZEP-1886`` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/nbuf)
+* ``ZEP-1887`` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/drivers/spi/spi_basic_api)
+* ``ZEP-1893`` - openocd: 'make flash' works with Zephyr SDK only and fails for all other toolchains
+* ``ZEP-1896`` - [PTS] L2CAP/LE/CFC/BV-06-C
+* ``ZEP-1899`` - Missing board documentation for xtensa/xt-sim
+* ``ZEP-1908`` - Missing board documentation for arm/nucleo_96b_nitrogen
+* ``ZEP-1910`` - Missing board documentation for arm/96b_carbon
+* ``ZEP-1927`` - AIO: AIO_CMP_POL_FALL is triggered immediately after aio_cmp_configure
+* ``ZEP-1935`` - Packet loss make RPL mesh more vulnerable
+* ``ZEP-1936`` - tests/drivers/spi/spi_basic_api/testcase.ini#test_spi - Assertion Fail
+* ``ZEP-1946`` - Time to Next Event
+* ``ZEP-1955`` - Nested interrupts crash on Xtensa architecture
+* ``ZEP-1959`` - Add Atmel SAM family serial (UART) driver
+* ``ZEP-1965`` - net-tools HEAD is broken for QEMU/TAP
+* ``ZEP-1966`` - Doesn't seem to be able to both send and receive locally via local address
+* ``ZEP-1968`` - "make mrproper" removes top-level dts/ dir, makes ARM builds fail afterwards
+* ``ZEP-1980`` - Move app_kernel benchmark to unified kernel
+* ``ZEP-1984`` - net_nbuf_append(), net_nbuf_append_bytes() have data integrity problems
+* ``ZEP-1990`` - Basic support for the BBC micro:bit LED display
+* ``ZEP-1993`` - Flowcontrol Required for CDC_ACM
+* ``ZEP-1995`` - samples/subsys/console breaks xtensa build
+* ``ZEP-1997`` - Crash during startup if co-processors are present
+* ``ZEP-2008`` - Port tickless idle test to unified kernel and cleanup
+* ``ZEP-2009`` - Port test_sleep test to unified kernel and cleanup
+* ``ZEP-2011`` - Retrieve RPL node information through CoAP requests
+* ``ZEP-2012`` - Fault in networking stack for cores that can't access unaligned memory
+* ``ZEP-2013`` - dead object monitor code
+* ``ZEP-2014`` - Default samples/subsys/shell/shell fails to build on QEMU RISCv32 / NIOS2
+* ``ZEP-2019`` - Xtensa port does not compile if CONFIG_TICKLESS_IDLE is enabled
+* ``ZEP-2027`` - Bluetooth Peripheral Sample won't pair with certain Android devices
+* ``ZEP-2029`` - xtensa: irq_offload() doesn't work on XRC_D2PM
+* ``ZEP-2033`` - Channel Selection Algorithm #2
+* ``ZEP-2034`` - High Duty Cycle Non-Connectable Advertising
+* ``ZEP-2037`` - Malformed echo response
+* ``ZEP-2048`` - Change UART "baud-rate" property to "current-speed"
+* ``ZEP-2051`` - Move away from C99 types to zephyr defined types
+* ``ZEP-2052`` - arm: unhandled exceptions in thread take down entire system
+* ``ZEP-2055`` - Add README.rst in the root of the project for github
+* ``ZEP-2057`` - crash in tests/net/rpl on qemu_x86 causing intermittent sanitycheck failure
+* ``ZEP-2061`` - samples/net/dns_resolve networking setup/README is confusing
+* ``ZEP-2064`` - RFC: Making net_shell command handlers reusable
+* ``ZEP-2065`` - struct dns_addrinfo has unused fields
+* ``ZEP-2066`` - nitpick: SOCK_STREAM/SOCK_DGRAM values swapped compared to most OSes
+* ``ZEP-2069`` - samples: net: dhcpv4_client: runs failed on frdm k64f board
+* ``ZEP-2070`` - net pkt doesn't full unref after send a data form bluetooth's ipsp
+* ``ZEP-2076`` - samples: net: coaps_server: build failed
+* ``ZEP-2077`` - Fix IID when using CONFIG_NET_L2_BLUETOOTH_ZEP1656
+* ``ZEP-2080`` - No reply from RPL node after 20-30 minutes.
+* ``ZEP-2092`` - [NRF][BT] Makefile:946: recipe for target 'include/generated/generated_dts_board.h' failed
+* ``ZEP-2114`` - tests/kernel/fatal : Fail for QC1000/arc
+* ``ZEP-2125`` - Compilation error when UART1 port is enabled via menuconfig
+* ``ZEP-2132`` - Build samples/bluetooth/hci_uart fail
+* ``ZEP-2138`` - Static code scan (coverity) issues seen
+* ``ZEP-2143`` - Compilation Error on Windows 10 with MSYS2
+* ``ZEP-2152`` - Xtensa crashes on startup for cores with coprocessors
+* ``ZEP-2178`` - Static code scan (coverity) issues seen
diff --git a/doc/releases/release-notes-1.9.rst b/doc/releases/release-notes-1.9.rst
index 7d82a9d..0debefe 100644
--- a/doc/releases/release-notes-1.9.rst
+++ b/doc/releases/release-notes-1.9.rst
@@ -207,176 +207,176 @@
JIRA Related Items
******************
-* :jira:`ZEP-230` - Define I2S driver APIs
-* :jira:`ZEP-601` - enable CONFIG_DEBUG_INFO
-* :jira:`ZEP-702` - Integrate Nordic's Phoenix Link Layer into Zephyr
-* :jira:`ZEP-749` - TinyCrypt uses an old, unoptimized version of micro-ecc
-* :jira:`ZEP-896` - nRF5x Series: Add support for power and clock peripheral
-* :jira:`ZEP-1067` - Driver for BMM150
-* :jira:`ZEP-1396` - Add ksdk adc shim driver
-* :jira:`ZEP-1426` - CONFIG_BOOT_TIME_MEASUREMENT on all targets?
-* :jira:`ZEP-1552` - Provide apds9960 sensor driver
-* :jira:`ZEP-1647` - Figure out new combo for breathe/doxygen/sphinx versions that are supported
-* :jira:`ZEP-1744` - UPF 56 BLE Controller Issues
-* :jira:`ZEP-1751` - Add template YAML file
-* :jira:`ZEP-1819` - Add tickless kernel support in nrf_rtc_timer timer
-* :jira:`ZEP-1843` - provide mechanism to filter test cases based on available hardware
-* :jira:`ZEP-1892` - Fix issues with Fix Release
-* :jira:`ZEP-1902` - Missing board documentation for arm/nucleo_f334r8
-* :jira:`ZEP-1911` - Missing board documentation for arm/stm3210c_eval
-* :jira:`ZEP-1917` - Missing board documentation for arm/stm32373c_eval
-* :jira:`ZEP-1918` - Fix connection parameter request procedure
-* :jira:`ZEP-2018` - Remove deprecated PWM APIs
-* :jira:`ZEP-2020` - tests/crypto/test_ecc_dsa intermittently fails on riscv32
-* :jira:`ZEP-2025` - Add mcux pwm shim driver for k64
-* :jira:`ZEP-2031` - ESP32 Architecture Configuration
-* :jira:`ZEP-2032` - Espressif Open-source Toolchain Support
-* :jira:`ZEP-2039` - Implement stm32cube LL based clock control driver
-* :jira:`ZEP-2054` - Convert all helper script to use python3
-* :jira:`ZEP-2062` - Convert gen_offset_header to a python script
-* :jira:`ZEP-2063` - Convert gen_idt to python
-* :jira:`ZEP-2068` - Need Tasks to Be Tracked in QRC too
-* :jira:`ZEP-2071` - samples: warning: (SPI_CS_GPIO && SPI_SS_CS_GPIO && I2C_NRF5) selects GPIO which has unmet direct dependencies
-* :jira:`ZEP-2085` - Add CONTRIBUTING.rst to root folder w/contributing guidelines
-* :jira:`ZEP-2089` - UART support for ESP32
-* :jira:`ZEP-2115` - Common API for networked applications for setting up network
-* :jira:`ZEP-2116` - Common API for networked apps to create client/server applications
-* :jira:`ZEP-2141` - Coverity CID 169303 in tests/net/ipv6/src/main.c
-* :jira:`ZEP-2150` - Move Arduino 101 to Device Tree
-* :jira:`ZEP-2151` - Move Quark D2000 to device tree
-* :jira:`ZEP-2156` - Build warnings [-Wformat] with LLVM/icx (tests/kernel/sprintf)
-* :jira:`ZEP-2168` - Timers seem to be broken with TICKLESS_KERNEL on nRF51 (Cortex M0)
-* :jira:`ZEP-2171` - Move all board pinmux code from drivers/pinmux/stm32 to the corresponding board/soc locations
-* :jira:`ZEP-2184` - Split data, bss, noinit sections into application and kernel areas
-* :jira:`ZEP-2188` - x86: Implement simple stack memory protection
-* :jira:`ZEP-2217` - schedule_api test fails on ARM with tickless kernel enabled
-* :jira:`ZEP-2218` - unexpected short timeslice when running schedule_api with tickless kernel enabled
-* :jira:`ZEP-2220` - Extend MPU to stm32 family
-* :jira:`ZEP-2225` - Ability to unregister GATT services
-* :jira:`ZEP-2226` - BSD Sockets API: Basic blocking API
-* :jira:`ZEP-2227` - BSD Sockets API: Non-blocking API
-* :jira:`ZEP-2229` - test_time_slicing_preemptible fails on bbc_microbit and other NRF boards
-* :jira:`ZEP-2250` - sanitycheck not filtering defconfigs properly
-* :jira:`ZEP-2258` - Coverity static scan issues seen
-* :jira:`ZEP-2265` - stack declaration macros for ARM MPU
-* :jira:`ZEP-2267` - Create Release Notes
-* :jira:`ZEP-2270` - Convert mpu_stack_guard_test from using k_thread_spawn to k_thread_create
-* :jira:`ZEP-2274` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/ipv6_fragment)
-* :jira:`ZEP-2278` - KW41-Z 802.15.4 driver hangs if full debug is disabled
-* :jira:`ZEP-2279` - echo_server TCP handler corrupt by SYN flood
-* :jira:`ZEP-2280` - add test case for KBUILD_ZEPHYR_APP
-* :jira:`ZEP-2285` - non-boards shows up in board list for docs
-* :jira:`ZEP-2286` - Write a GPIO driver for ESP32
-* :jira:`ZEP-2289` - [DoS] Memory leak from large TCP packets
-* :jira:`ZEP-2296` - ESP32: watchdog driver
-* :jira:`ZEP-2297` - ESP32: Pin mux driver
-* :jira:`ZEP-2303` - Concurrent incoming TCP connections
-* :jira:`ZEP-2305` - linker: implement MMU alignment constraints
-* :jira:`ZEP-2306` - echo server hangs from IPv6 hop-by-hop option anomaly
-* :jira:`ZEP-2308` - (New) Networking API details documentation is missing
-* :jira:`ZEP-2310` - Improve configuration documentation index organization
-* :jira:`ZEP-2314` - Testcase failure :tests/benchmarks/timing_info/testcase.ini#test
-* :jira:`ZEP-2316` - Testcase failure :tests/bluetooth/shell/testcase.ini#test_br
-* :jira:`ZEP-2318` - some kernel objects sections are misaligned
-* :jira:`ZEP-2319` - tests/net/ieee802154/l2 uses semaphore before initialization
-* :jira:`ZEP-2321` - [PTS] All TC's of SM/GATT/GAP failed due to BTP_TIMEOUT error.
-* :jira:`ZEP-2326` - x86: API to validate user buffer
-* :jira:`ZEP-2328` - gen_mmu.py appears to generate incorrect tables in some situations
-* :jira:`ZEP-2329` - bad memory access tests/net/route
-* :jira:`ZEP-2330` - bad memory access tests/net/rpl
-* :jira:`ZEP-2331` - bad memory access tests/net/ieee802154/l2
-* :jira:`ZEP-2332` - bad memory access tests/net/ip-addr
-* :jira:`ZEP-2334` - bluetooth shell build warning when CONFIG_DEBUG=y
-* :jira:`ZEP-2335` - Ensure the Licensing page is up-to-date for the release
-* :jira:`ZEP-2340` - Disabling advertising gets stuck
-* :jira:`ZEP-2341` - Build warnings:override: reassigning to symbol MAIN_STACK_SIZE with LLVM/icx (/tests/net/6lo)
-* :jira:`ZEP-2343` - Coverity static scan issues seen
-* :jira:`ZEP-2344` - Coverity static scan issues seen
-* :jira:`ZEP-2345` - Coverity static scan issues seen
-* :jira:`ZEP-2352` - network API docs don't mention when callbacks are called from a different thread
-* :jira:`ZEP-2354` - ESP32: Random number generator
-* :jira:`ZEP-2355` - Coverity static scan issues seen
-* :jira:`ZEP-2358` - samples:net:echo_server: Failed to send UDP packets
-* :jira:`ZEP-2359` - samples:net:coaps_server: unable to bind with IPv6
-* :jira:`ZEP-2360` - Initial implementation of Bluetooth Mesh
-* :jira:`ZEP-2361` - Provide a POSIX compatibility Layer on top of native APIs
-* :jira:`ZEP-2365` - samples/net/wpanusb/test_15_4 fail on nrf52840_pca10056 and frdm_kw41z
-* :jira:`ZEP-2366` - implement \__kernel attribute
-* :jira:`ZEP-2367` - NULL pointer read in udp, tcp, context net tests
-* :jira:`ZEP-2368` - x86: QEMU: enable MMU at boot by default
-* :jira:`ZEP-2370` - [test] Create a stress test to test preemptive scheduling on zephyr
-* :jira:`ZEP-2371` - [test] Create a stress test to test round robin scheduling with equal priority tasks on zephyr
-* :jira:`ZEP-2374` - Build warnings:override: reassigning to symbol NET_IPV4 with LLVM/icx (/tests/net/dhcpv4)
-* :jira:`ZEP-2375` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/udp)
-* :jira:`ZEP-2378` - sample/bluetooth/ipsp: When build the app 'ROM' overflowed
-* :jira:`ZEP-2379` - samples/bluetooth: Bluetooth init failed (err -19)
-* :jira:`ZEP-2380` - TCP is broken by Zephyr commit 3604c391e
-* :jira:`ZEP-2382` - Convert test to use ztest framework
-* :jira:`ZEP-2383` - Net-app API needs to support DTLS
-* :jira:`ZEP-2384` - "Common" bluetooth sample code does not build out of tree
-* :jira:`ZEP-2385` - Update TinyCrypt to 0.2.7
-* :jira:`ZEP-2395` - Assert in http_server example when run over bluetooth on nrf52840
-* :jira:`ZEP-2397` - net_if_ipv6_addr_rm calls k_delayed_work_cancel() on uninitialized k_delayed_work object
-* :jira:`ZEP-2398` - network stack test cases are only tested on x86
-* :jira:`ZEP-2403` - Enabling MMU for qemu_x86 broke active connect support
-* :jira:`ZEP-2407` - [Cortex m series ] Getting a crash on Cortex m3 series when more than 8 preemptive threads with equal priority are scheduled
-* :jira:`ZEP-2408` - design mechanism for kernel object sharing policy
-* :jira:`ZEP-2412` - Bluetooth tester app not working from commit c1e5cb
-* :jira:`ZEP-2423` - samples/bluetooth/ipsp's builtin TCP echo crashes on TCP closure
-* :jira:`ZEP-2432` - ieee802154_shell.c, net_mgmt call leads to a BUS FAULT
-* :jira:`ZEP-2433` - x86: do forensic analysis to determine stack overflow context in supervisor mode
-* :jira:`ZEP-2436` - Unable to see console output in Quark_D200_CRB
-* :jira:`ZEP-2437` - warnings when building applications for quark d2000
-* :jira:`ZEP-2444` - [nrf] Scheduling test API is getting failed in case of nrf51/nrf52 platforms
-* :jira:`ZEP-2445` - nrf52: CPU lock-up when using Bluetooth + Flash driver + CONFIG_ASSERT
-* :jira:`ZEP-2447` - 'make debugserver' fails for qemu_x86_iamcu
-* :jira:`ZEP-2451` - Move Bluetooth IPSP support functions from samples/bluetooth to a separate library
-* :jira:`ZEP-2452` - https server does not build for olimex_stm32_e407
-* :jira:`ZEP-2457` - generated/offsets.h is being regenerated unnecessarily
-* :jira:`ZEP-2459` - Sample application not working with Quark SE C1000
-* :jira:`ZEP-2460` - tests/crypto/ecc_dh fails on qemu_nios2
-* :jira:`ZEP-2464` - "allow IPv6 interface init to work with late IP assignment" patch broke non-late IPv6 assignment
-* :jira:`ZEP-2465` - Static code scan (coverity) issues seen
-* :jira:`ZEP-2467` - Static code scan (coverity) issues seen
-* :jira:`ZEP-2468` - Static code scan (coverity) issues seen
-* :jira:`ZEP-2469` - Static code scan (coverity) issues seen
-* :jira:`ZEP-2474` - Static code scan (coverity) issues seen
-* :jira:`ZEP-2480` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/coaps_server)
-* :jira:`ZEP-2482` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/telnet)
-* :jira:`ZEP-2483` - samples:net:http_client: Failed to get http requests in IPv6
-* :jira:`ZEP-2484` - samples:net:http_server: Failed to work in IPv6
-* :jira:`ZEP-2485` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/coaps_client)
-* :jira:`ZEP-2486` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/mbedtls_dtlsserver)
-* :jira:`ZEP-2488` - Build warnings [-Wpointer-sign] and [-Warray-bounds] with LLVM/icx (samples/net/irc_bot)
-* :jira:`ZEP-2489` - bug in _x86_mmu_buffer_validate API
-* :jira:`ZEP-2496` - Build failure on tests/benchmarks/object_footprint
-* :jira:`ZEP-2497` - [TIMER] k_timer_start should take 0 value for duration parameter
-* :jira:`ZEP-2498` - [Display] Minimum Duration argument to k_timer_start should be non Zero positive value
-* :jira:`ZEP-2508` - esp32 linkage doesn't unify ELF sections correctly
-* :jira:`ZEP-2510` - BT: CONFIG_BT_HCI_TX_STACK_SIZE appears to be too low for BT_SPI
-* :jira:`ZEP-2514` - XCC sanitycheck build compile wrong targets
-* :jira:`ZEP-2523` - Static code scan (Coverity) issue seen in file: /samples/net/zoap_server/src/zoap-server.c
-* :jira:`ZEP-2525` - Static code scan (Coverity) issue seen in file: /samples/net/zoap_server/src/zoap-server.c
-* :jira:`ZEP-2531` - Static code scan (Coverity) issue seen in file: /tests/net/lib/dns_resolve/src/main.c
-* :jira:`ZEP-2528` - Static code scan (Coverity) issue seen in file: /samples/net/nats/src/nats.c
-* :jira:`ZEP-2534` - Static code scan (Coverity) issue seen in file: /tests/kernel/irq_offload/src/irq_offload.c
-* :jira:`ZEP-2535` - Static code scan (Coverity) issue seen in file: /tests/net/lib/zoap/src/main.c
-* :jira:`ZEP-2537` - Static code scan (Coverity) issue seen in file: /tests/crypto/ecc_dh/src/ecc_dh.c
-* :jira:`ZEP-2538` - Static code scan (Coverity) issue seen in file: /arch/arm/soc/st_stm32/stm32f1/soc_gpio.c
-* :jira:`ZEP-2539` - Static code scan (Coverity) issue seen in file: /tests/net/ieee802154/l2/src/ieee802154_test.c
-* :jira:`ZEP-2540` - Static code scan (Coverity) issue seen in file: /ext/lib/crypto/tinycrypt/source/ecc_dh.c
-* :jira:`ZEP-2541` - Static code scan (Coverity) issue seen in file: /subsys/bluetooth/host/mesh/cfg.c
-* :jira:`ZEP-2549` - Static code scan (Coverity) issue seen in file: /samples/net/leds_demo/src/leds-demo.c
-* :jira:`ZEP-2552` - ESP32 uart poll_out always return 0
-* :jira:`ZEP-2553` - k_queue_poll not handling -EADDRINUSE (another thread already polling) properly
-* :jira:`ZEP-2556` - ESP32 watchdog WDT_MODE_INTERRUPT_RESET mode fails
-* :jira:`ZEP-2557` - ESP32 : Some GPIO tests are getting failed (tests/drivers/gpio/gpio_basic_api)
-* :jira:`ZEP-2558` - CONFIG_BLUETOOTH_* Kconfig options silently ignored
-* :jira:`ZEP-2560` - samples/net: the sample of zoap_server fails to add multicast address
-* :jira:`ZEP-2561` - samples/net: The HTTP client failed to send the POST request
-* :jira:`ZEP-2568` - [PTS] All TC's of L2CAP/SM/GATT/GAP failed due to BTP_ERROR.
-* :jira:`ZEP-2575` - error:[ '-O: command not found'] with LLVM/icx (samples/hello_world)
-* :jira:`ZEP-2576` - samples/net/sockets/echo, echo_async : fails to send the TCP packets
-* :jira:`ZEP-2581` - CC3220 executable binary format support
-* :jira:`ZEP-2584` - Update mbedTLS to 2.6.0
-* :jira:`ZEP-713` - Implement preemptible regular IRQs on ARC
+* ``ZEP-230`` - Define I2S driver APIs
+* ``ZEP-601`` - enable CONFIG_DEBUG_INFO
+* ``ZEP-702`` - Integrate Nordic's Phoenix Link Layer into Zephyr
+* ``ZEP-749`` - TinyCrypt uses an old, unoptimized version of micro-ecc
+* ``ZEP-896`` - nRF5x Series: Add support for power and clock peripheral
+* ``ZEP-1067`` - Driver for BMM150
+* ``ZEP-1396`` - Add ksdk adc shim driver
+* ``ZEP-1426`` - CONFIG_BOOT_TIME_MEASUREMENT on all targets?
+* ``ZEP-1552`` - Provide apds9960 sensor driver
+* ``ZEP-1647`` - Figure out new combo for breathe/doxygen/sphinx versions that are supported
+* ``ZEP-1744`` - UPF 56 BLE Controller Issues
+* ``ZEP-1751`` - Add template YAML file
+* ``ZEP-1819`` - Add tickless kernel support in nrf_rtc_timer timer
+* ``ZEP-1843`` - provide mechanism to filter test cases based on available hardware
+* ``ZEP-1892`` - Fix issues with Fix Release
+* ``ZEP-1902`` - Missing board documentation for arm/nucleo_f334r8
+* ``ZEP-1911`` - Missing board documentation for arm/stm3210c_eval
+* ``ZEP-1917`` - Missing board documentation for arm/stm32373c_eval
+* ``ZEP-1918`` - Fix connection parameter request procedure
+* ``ZEP-2018`` - Remove deprecated PWM APIs
+* ``ZEP-2020`` - tests/crypto/test_ecc_dsa intermittently fails on riscv32
+* ``ZEP-2025`` - Add mcux pwm shim driver for k64
+* ``ZEP-2031`` - ESP32 Architecture Configuration
+* ``ZEP-2032`` - Espressif Open-source Toolchain Support
+* ``ZEP-2039`` - Implement stm32cube LL based clock control driver
+* ``ZEP-2054`` - Convert all helper script to use python3
+* ``ZEP-2062`` - Convert gen_offset_header to a python script
+* ``ZEP-2063`` - Convert gen_idt to python
+* ``ZEP-2068`` - Need Tasks to Be Tracked in QRC too
+* ``ZEP-2071`` - samples: warning: (SPI_CS_GPIO && SPI_SS_CS_GPIO && I2C_NRF5) selects GPIO which has unmet direct dependencies
+* ``ZEP-2085`` - Add CONTRIBUTING.rst to root folder w/contributing guidelines
+* ``ZEP-2089`` - UART support for ESP32
+* ``ZEP-2115`` - Common API for networked applications for setting up network
+* ``ZEP-2116`` - Common API for networked apps to create client/server applications
+* ``ZEP-2141`` - Coverity CID 169303 in tests/net/ipv6/src/main.c
+* ``ZEP-2150`` - Move Arduino 101 to Device Tree
+* ``ZEP-2151`` - Move Quark D2000 to device tree
+* ``ZEP-2156`` - Build warnings [-Wformat] with LLVM/icx (tests/kernel/sprintf)
+* ``ZEP-2168`` - Timers seem to be broken with TICKLESS_KERNEL on nRF51 (Cortex M0)
+* ``ZEP-2171`` - Move all board pinmux code from drivers/pinmux/stm32 to the corresponding board/soc locations
+* ``ZEP-2184`` - Split data, bss, noinit sections into application and kernel areas
+* ``ZEP-2188`` - x86: Implement simple stack memory protection
+* ``ZEP-2217`` - schedule_api test fails on ARM with tickless kernel enabled
+* ``ZEP-2218`` - unexpected short timeslice when running schedule_api with tickless kernel enabled
+* ``ZEP-2220`` - Extend MPU to stm32 family
+* ``ZEP-2225`` - Ability to unregister GATT services
+* ``ZEP-2226`` - BSD Sockets API: Basic blocking API
+* ``ZEP-2227`` - BSD Sockets API: Non-blocking API
+* ``ZEP-2229`` - test_time_slicing_preemptible fails on bbc_microbit and other NRF boards
+* ``ZEP-2250`` - sanitycheck not filtering defconfigs properly
+* ``ZEP-2258`` - Coverity static scan issues seen
+* ``ZEP-2265`` - stack declaration macros for ARM MPU
+* ``ZEP-2267`` - Create Release Notes
+* ``ZEP-2270`` - Convert mpu_stack_guard_test from using k_thread_spawn to k_thread_create
+* ``ZEP-2274`` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/ipv6_fragment)
+* ``ZEP-2278`` - KW41-Z 802.15.4 driver hangs if full debug is disabled
+* ``ZEP-2279`` - echo_server TCP handler corrupt by SYN flood
+* ``ZEP-2280`` - add test case for KBUILD_ZEPHYR_APP
+* ``ZEP-2285`` - non-boards shows up in board list for docs
+* ``ZEP-2286`` - Write a GPIO driver for ESP32
+* ``ZEP-2289`` - [DoS] Memory leak from large TCP packets
+* ``ZEP-2296`` - ESP32: watchdog driver
+* ``ZEP-2297`` - ESP32: Pin mux driver
+* ``ZEP-2303`` - Concurrent incoming TCP connections
+* ``ZEP-2305`` - linker: implement MMU alignment constraints
+* ``ZEP-2306`` - echo server hangs from IPv6 hop-by-hop option anomaly
+* ``ZEP-2308`` - (New) Networking API details documentation is missing
+* ``ZEP-2310`` - Improve configuration documentation index organization
+* ``ZEP-2314`` - Testcase failure :tests/benchmarks/timing_info/testcase.ini#test
+* ``ZEP-2316`` - Testcase failure :tests/bluetooth/shell/testcase.ini#test_br
+* ``ZEP-2318`` - some kernel objects sections are misaligned
+* ``ZEP-2319`` - tests/net/ieee802154/l2 uses semaphore before initialization
+* ``ZEP-2321`` - [PTS] All TC's of SM/GATT/GAP failed due to BTP_TIMEOUT error.
+* ``ZEP-2326`` - x86: API to validate user buffer
+* ``ZEP-2328`` - gen_mmu.py appears to generate incorrect tables in some situations
+* ``ZEP-2329`` - bad memory access tests/net/route
+* ``ZEP-2330`` - bad memory access tests/net/rpl
+* ``ZEP-2331`` - bad memory access tests/net/ieee802154/l2
+* ``ZEP-2332`` - bad memory access tests/net/ip-addr
+* ``ZEP-2334`` - bluetooth shell build warning when CONFIG_DEBUG=y
+* ``ZEP-2335`` - Ensure the Licensing page is up-to-date for the release
+* ``ZEP-2340`` - Disabling advertising gets stuck
+* ``ZEP-2341`` - Build warnings:override: reassigning to symbol MAIN_STACK_SIZE with LLVM/icx (/tests/net/6lo)
+* ``ZEP-2343`` - Coverity static scan issues seen
+* ``ZEP-2344`` - Coverity static scan issues seen
+* ``ZEP-2345`` - Coverity static scan issues seen
+* ``ZEP-2352`` - network API docs don't mention when callbacks are called from a different thread
+* ``ZEP-2354`` - ESP32: Random number generator
+* ``ZEP-2355`` - Coverity static scan issues seen
+* ``ZEP-2358`` - samples:net:echo_server: Failed to send UDP packets
+* ``ZEP-2359`` - samples:net:coaps_server: unable to bind with IPv6
+* ``ZEP-2360`` - Initial implementation of Bluetooth Mesh
+* ``ZEP-2361`` - Provide a POSIX compatibility Layer on top of native APIs
+* ``ZEP-2365`` - samples/net/wpanusb/test_15_4 fail on nrf52840_pca10056 and frdm_kw41z
+* ``ZEP-2366`` - implement \__kernel attribute
+* ``ZEP-2367`` - NULL pointer read in udp, tcp, context net tests
+* ``ZEP-2368`` - x86: QEMU: enable MMU at boot by default
+* ``ZEP-2370`` - [test] Create a stress test to test preemptive scheduling on zephyr
+* ``ZEP-2371`` - [test] Create a stress test to test round robin scheduling with equal priority tasks on zephyr
+* ``ZEP-2374`` - Build warnings:override: reassigning to symbol NET_IPV4 with LLVM/icx (/tests/net/dhcpv4)
+* ``ZEP-2375`` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/udp)
+* ``ZEP-2378`` - sample/bluetooth/ipsp: When build the app 'ROM' overflowed
+* ``ZEP-2379`` - samples/bluetooth: Bluetooth init failed (err -19)
+* ``ZEP-2380`` - TCP is broken by Zephyr commit 3604c391e
+* ``ZEP-2382`` - Convert test to use ztest framework
+* ``ZEP-2383`` - Net-app API needs to support DTLS
+* ``ZEP-2384`` - "Common" bluetooth sample code does not build out of tree
+* ``ZEP-2385`` - Update TinyCrypt to 0.2.7
+* ``ZEP-2395`` - Assert in http_server example when run over bluetooth on nrf52840
+* ``ZEP-2397`` - net_if_ipv6_addr_rm calls k_delayed_work_cancel() on uninitialized k_delayed_work object
+* ``ZEP-2398`` - network stack test cases are only tested on x86
+* ``ZEP-2403`` - Enabling MMU for qemu_x86 broke active connect support
+* ``ZEP-2407`` - [Cortex m series ] Getting a crash on Cortex m3 series when more than 8 preemptive threads with equal priority are scheduled
+* ``ZEP-2408`` - design mechanism for kernel object sharing policy
+* ``ZEP-2412`` - Bluetooth tester app not working from commit c1e5cb
+* ``ZEP-2423`` - samples/bluetooth/ipsp's builtin TCP echo crashes on TCP closure
+* ``ZEP-2432`` - ieee802154_shell.c, net_mgmt call leads to a BUS FAULT
+* ``ZEP-2433`` - x86: do forensic analysis to determine stack overflow context in supervisor mode
+* ``ZEP-2436`` - Unable to see console output in Quark_D200_CRB
+* ``ZEP-2437`` - warnings when building applications for quark d2000
+* ``ZEP-2444`` - [nrf] Scheduling test API is getting failed in case of nrf51/nrf52 platforms
+* ``ZEP-2445`` - nrf52: CPU lock-up when using Bluetooth + Flash driver + CONFIG_ASSERT
+* ``ZEP-2447`` - 'make debugserver' fails for qemu_x86_iamcu
+* ``ZEP-2451`` - Move Bluetooth IPSP support functions from samples/bluetooth to a separate library
+* ``ZEP-2452`` - https server does not build for olimex_stm32_e407
+* ``ZEP-2457`` - generated/offsets.h is being regenerated unnecessarily
+* ``ZEP-2459`` - Sample application not working with Quark SE C1000
+* ``ZEP-2460`` - tests/crypto/ecc_dh fails on qemu_nios2
+* ``ZEP-2464`` - "allow IPv6 interface init to work with late IP assignment" patch broke non-late IPv6 assignment
+* ``ZEP-2465`` - Static code scan (coverity) issues seen
+* ``ZEP-2467`` - Static code scan (coverity) issues seen
+* ``ZEP-2468`` - Static code scan (coverity) issues seen
+* ``ZEP-2469`` - Static code scan (coverity) issues seen
+* ``ZEP-2474`` - Static code scan (coverity) issues seen
+* ``ZEP-2480`` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/coaps_server)
+* ``ZEP-2482`` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/telnet)
+* ``ZEP-2483`` - samples:net:http_client: Failed to get http requests in IPv6
+* ``ZEP-2484`` - samples:net:http_server: Failed to work in IPv6
+* ``ZEP-2485`` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/coaps_client)
+* ``ZEP-2486`` - Build warnings [-Wpointer-sign] with LLVM/icx (samples/net/mbedtls_dtlsserver)
+* ``ZEP-2488`` - Build warnings [-Wpointer-sign] and [-Warray-bounds] with LLVM/icx (samples/net/irc_bot)
+* ``ZEP-2489`` - bug in _x86_mmu_buffer_validate API
+* ``ZEP-2496`` - Build failure on tests/benchmarks/object_footprint
+* ``ZEP-2497`` - [TIMER] k_timer_start should take 0 value for duration parameter
+* ``ZEP-2498`` - [Display] Minimum Duration argument to k_timer_start should be non Zero positive value
+* ``ZEP-2508`` - esp32 linkage doesn't unify ELF sections correctly
+* ``ZEP-2510`` - BT: CONFIG_BT_HCI_TX_STACK_SIZE appears to be too low for BT_SPI
+* ``ZEP-2514`` - XCC sanitycheck build compile wrong targets
+* ``ZEP-2523`` - Static code scan (Coverity) issue seen in file: /samples/net/zoap_server/src/zoap-server.c
+* ``ZEP-2525`` - Static code scan (Coverity) issue seen in file: /samples/net/zoap_server/src/zoap-server.c
+* ``ZEP-2531`` - Static code scan (Coverity) issue seen in file: /tests/net/lib/dns_resolve/src/main.c
+* ``ZEP-2528`` - Static code scan (Coverity) issue seen in file: /samples/net/nats/src/nats.c
+* ``ZEP-2534`` - Static code scan (Coverity) issue seen in file: /tests/kernel/irq_offload/src/irq_offload.c
+* ``ZEP-2535`` - Static code scan (Coverity) issue seen in file: /tests/net/lib/zoap/src/main.c
+* ``ZEP-2537`` - Static code scan (Coverity) issue seen in file: /tests/crypto/ecc_dh/src/ecc_dh.c
+* ``ZEP-2538`` - Static code scan (Coverity) issue seen in file: /arch/arm/soc/st_stm32/stm32f1/soc_gpio.c
+* ``ZEP-2539`` - Static code scan (Coverity) issue seen in file: /tests/net/ieee802154/l2/src/ieee802154_test.c
+* ``ZEP-2540`` - Static code scan (Coverity) issue seen in file: /ext/lib/crypto/tinycrypt/source/ecc_dh.c
+* ``ZEP-2541`` - Static code scan (Coverity) issue seen in file: /subsys/bluetooth/host/mesh/cfg.c
+* ``ZEP-2549`` - Static code scan (Coverity) issue seen in file: /samples/net/leds_demo/src/leds-demo.c
+* ``ZEP-2552`` - ESP32 uart poll_out always return 0
+* ``ZEP-2553`` - k_queue_poll not handling -EADDRINUSE (another thread already polling) properly
+* ``ZEP-2556`` - ESP32 watchdog WDT_MODE_INTERRUPT_RESET mode fails
+* ``ZEP-2557`` - ESP32 : Some GPIO tests are getting failed (tests/drivers/gpio/gpio_basic_api)
+* ``ZEP-2558`` - CONFIG_BLUETOOTH_* Kconfig options silently ignored
+* ``ZEP-2560`` - samples/net: the sample of zoap_server fails to add multicast address
+* ``ZEP-2561`` - samples/net: The HTTP client failed to send the POST request
+* ``ZEP-2568`` - [PTS] All TC's of L2CAP/SM/GATT/GAP failed due to BTP_ERROR.
+* ``ZEP-2575`` - error:[ '-O: command not found'] with LLVM/icx (samples/hello_world)
+* ``ZEP-2576`` - samples/net/sockets/echo, echo_async : fails to send the TCP packets
+* ``ZEP-2581`` - CC3220 executable binary format support
+* ``ZEP-2584`` - Update mbedTLS to 2.6.0
+* ``ZEP-713`` - Implement preemptible regular IRQs on ARC
