blob: ded130e500648c8093e4efb686e7c4fe87b0476e [file] [log] [blame]
/******************************************************************************
* Filename: hw_aon_batmon_h
* Revised: 2018-05-14 12:24:52 +0200 (Mon, 14 May 2018)
* Revision: 51990
*
* Copyright (c) 2015 - 2017, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2) Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3) Neither the name of the ORGANIZATION nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef __HW_AON_BATMON_H__
#define __HW_AON_BATMON_H__
//*****************************************************************************
//
// This section defines the register offsets of
// AON_BATMON component
//
//*****************************************************************************
// Internal
#define AON_BATMON_O_CTL 0x00000000
// Internal
#define AON_BATMON_O_MEASCFG 0x00000004
// Internal
#define AON_BATMON_O_TEMPP0 0x0000000C
// Internal
#define AON_BATMON_O_TEMPP1 0x00000010
// Internal
#define AON_BATMON_O_TEMPP2 0x00000014
// Internal
#define AON_BATMON_O_BATMONP0 0x00000018
// Internal
#define AON_BATMON_O_BATMONP1 0x0000001C
// Internal
#define AON_BATMON_O_IOSTRP0 0x00000020
// Internal
#define AON_BATMON_O_FLASHPUMPP0 0x00000024
// Last Measured Battery Voltage
#define AON_BATMON_O_BAT 0x00000028
// Battery Update
#define AON_BATMON_O_BATUPD 0x0000002C
// Temperature
#define AON_BATMON_O_TEMP 0x00000030
// Temperature Update
#define AON_BATMON_O_TEMPUPD 0x00000034
// Event Mask
#define AON_BATMON_O_EVENTMASK 0x00000048
// Event
#define AON_BATMON_O_EVENT 0x0000004C
// Battery Upper Limit
#define AON_BATMON_O_BATTUL 0x00000050
// Battery Lower Limit
#define AON_BATMON_O_BATTLL 0x00000054
// Temperature Upper Limit
#define AON_BATMON_O_TEMPUL 0x00000058
// Temperature Lower Limit
#define AON_BATMON_O_TEMPLL 0x0000005C
//*****************************************************************************
//
// Register: AON_BATMON_O_CTL
//
//*****************************************************************************
// Field: [1] CALC_EN
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_CTL_CALC_EN 0x00000002
#define AON_BATMON_CTL_CALC_EN_BITN 1
#define AON_BATMON_CTL_CALC_EN_M 0x00000002
#define AON_BATMON_CTL_CALC_EN_S 1
// Field: [0] MEAS_EN
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_CTL_MEAS_EN 0x00000001
#define AON_BATMON_CTL_MEAS_EN_BITN 0
#define AON_BATMON_CTL_MEAS_EN_M 0x00000001
#define AON_BATMON_CTL_MEAS_EN_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_MEASCFG
//
//*****************************************************************************
// Field: [1:0] PER
//
// Internal. Only to be used through TI provided API.
// ENUMs:
// 32CYC Internal. Only to be used through TI provided API.
// 16CYC Internal. Only to be used through TI provided API.
// 8CYC Internal. Only to be used through TI provided API.
// CONT Internal. Only to be used through TI provided API.
#define AON_BATMON_MEASCFG_PER_W 2
#define AON_BATMON_MEASCFG_PER_M 0x00000003
#define AON_BATMON_MEASCFG_PER_S 0
#define AON_BATMON_MEASCFG_PER_32CYC 0x00000003
#define AON_BATMON_MEASCFG_PER_16CYC 0x00000002
#define AON_BATMON_MEASCFG_PER_8CYC 0x00000001
#define AON_BATMON_MEASCFG_PER_CONT 0x00000000
//*****************************************************************************
//
// Register: AON_BATMON_O_TEMPP0
//
//*****************************************************************************
// Field: [7:0] CFG
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_TEMPP0_CFG_W 8
#define AON_BATMON_TEMPP0_CFG_M 0x000000FF
#define AON_BATMON_TEMPP0_CFG_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_TEMPP1
//
//*****************************************************************************
// Field: [5:0] CFG
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_TEMPP1_CFG_W 6
#define AON_BATMON_TEMPP1_CFG_M 0x0000003F
#define AON_BATMON_TEMPP1_CFG_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_TEMPP2
//
//*****************************************************************************
// Field: [4:0] CFG
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_TEMPP2_CFG_W 5
#define AON_BATMON_TEMPP2_CFG_M 0x0000001F
#define AON_BATMON_TEMPP2_CFG_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_BATMONP0
//
//*****************************************************************************
// Field: [6:0] CFG
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_BATMONP0_CFG_W 7
#define AON_BATMON_BATMONP0_CFG_M 0x0000007F
#define AON_BATMON_BATMONP0_CFG_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_BATMONP1
//
//*****************************************************************************
// Field: [5:0] CFG
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_BATMONP1_CFG_W 6
#define AON_BATMON_BATMONP1_CFG_M 0x0000003F
#define AON_BATMON_BATMONP1_CFG_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_IOSTRP0
//
//*****************************************************************************
// Field: [5:4] CFG2
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_IOSTRP0_CFG2_W 2
#define AON_BATMON_IOSTRP0_CFG2_M 0x00000030
#define AON_BATMON_IOSTRP0_CFG2_S 4
// Field: [3:0] CFG1
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_IOSTRP0_CFG1_W 4
#define AON_BATMON_IOSTRP0_CFG1_M 0x0000000F
#define AON_BATMON_IOSTRP0_CFG1_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_FLASHPUMPP0
//
//*****************************************************************************
// Field: [9] DIS_NOISE_FILTER
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_FLASHPUMPP0_DIS_NOISE_FILTER 0x00000200
#define AON_BATMON_FLASHPUMPP0_DIS_NOISE_FILTER_BITN 9
#define AON_BATMON_FLASHPUMPP0_DIS_NOISE_FILTER_M 0x00000200
#define AON_BATMON_FLASHPUMPP0_DIS_NOISE_FILTER_S 9
// Field: [8] FALLB
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_FLASHPUMPP0_FALLB 0x00000100
#define AON_BATMON_FLASHPUMPP0_FALLB_BITN 8
#define AON_BATMON_FLASHPUMPP0_FALLB_M 0x00000100
#define AON_BATMON_FLASHPUMPP0_FALLB_S 8
// Field: [7:6] HIGHLIM
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_FLASHPUMPP0_HIGHLIM_W 2
#define AON_BATMON_FLASHPUMPP0_HIGHLIM_M 0x000000C0
#define AON_BATMON_FLASHPUMPP0_HIGHLIM_S 6
// Field: [5] LOWLIM
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_FLASHPUMPP0_LOWLIM 0x00000020
#define AON_BATMON_FLASHPUMPP0_LOWLIM_BITN 5
#define AON_BATMON_FLASHPUMPP0_LOWLIM_M 0x00000020
#define AON_BATMON_FLASHPUMPP0_LOWLIM_S 5
// Field: [4] OVR
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_FLASHPUMPP0_OVR 0x00000010
#define AON_BATMON_FLASHPUMPP0_OVR_BITN 4
#define AON_BATMON_FLASHPUMPP0_OVR_M 0x00000010
#define AON_BATMON_FLASHPUMPP0_OVR_S 4
// Field: [3:0] CFG
//
// Internal. Only to be used through TI provided API.
#define AON_BATMON_FLASHPUMPP0_CFG_W 4
#define AON_BATMON_FLASHPUMPP0_CFG_M 0x0000000F
#define AON_BATMON_FLASHPUMPP0_CFG_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_BAT
//
//*****************************************************************************
// Field: [10:8] INT
//
// Integer part:
//
// 0x0: 0V + fractional part
// ...
// 0x3: 3V + fractional part
// 0x4: 4V + fractional part
#define AON_BATMON_BAT_INT_W 3
#define AON_BATMON_BAT_INT_M 0x00000700
#define AON_BATMON_BAT_INT_S 8
// Field: [7:0] FRAC
//
// Fractional part, standard binary fractional encoding.
//
// 0x00: .0V
// ...
// 0x20: 1/8 = .125V
// 0x40: 1/4 = .25V
// 0x80: 1/2 = .5V
// ...
// 0xA0: 1/2 + 1/8 = .625V
// ...
// 0xFF: Max
#define AON_BATMON_BAT_FRAC_W 8
#define AON_BATMON_BAT_FRAC_M 0x000000FF
#define AON_BATMON_BAT_FRAC_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_BATUPD
//
//*****************************************************************************
// Field: [0] STAT
//
//
// 0: No update since last clear
// 1: New battery voltage is present.
//
// Write 1 to clear the status.
#define AON_BATMON_BATUPD_STAT 0x00000001
#define AON_BATMON_BATUPD_STAT_BITN 0
#define AON_BATMON_BATUPD_STAT_M 0x00000001
#define AON_BATMON_BATUPD_STAT_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_TEMP
//
//*****************************************************************************
// Field: [16:8] INT
//
// Integer part (signed) of temperature value.
// Total value = INTEGER + FRACTIONAL
// 2's complement encoding
//
// 0x100: Min value
// 0x1D8: -40C
// 0x1FF: -1C
// 0x00: 0C
// 0x1B: 27C
// 0x55: 85C
// 0xFF: Max value
#define AON_BATMON_TEMP_INT_W 9
#define AON_BATMON_TEMP_INT_M 0x0001FF00
#define AON_BATMON_TEMP_INT_S 8
//*****************************************************************************
//
// Register: AON_BATMON_O_TEMPUPD
//
//*****************************************************************************
// Field: [0] STAT
//
//
// 0: No update since last clear
// 1: New temperature is present.
//
// Write 1 to clear the status.
#define AON_BATMON_TEMPUPD_STAT 0x00000001
#define AON_BATMON_TEMPUPD_STAT_BITN 0
#define AON_BATMON_TEMPUPD_STAT_M 0x00000001
#define AON_BATMON_TEMPUPD_STAT_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_EVENTMASK
//
//*****************************************************************************
// Field: [5] TEMP_UPDATE_MASK
//
// 1: EVENT.TEMP_UPDATE contributes to combined event from BATMON
// 0: EVENT.TEMP_UPDATE does not contribute to combined event from BATMON
#define AON_BATMON_EVENTMASK_TEMP_UPDATE_MASK 0x00000020
#define AON_BATMON_EVENTMASK_TEMP_UPDATE_MASK_BITN 5
#define AON_BATMON_EVENTMASK_TEMP_UPDATE_MASK_M 0x00000020
#define AON_BATMON_EVENTMASK_TEMP_UPDATE_MASK_S 5
// Field: [4] BATT_UPDATE_MASK
//
// 1: EVENT.BATT_UPDATE contributes to combined event from BATMON
// 0: EVENT.BATT_UPDATE does not contribute to combined event from BATMON
#define AON_BATMON_EVENTMASK_BATT_UPDATE_MASK 0x00000010
#define AON_BATMON_EVENTMASK_BATT_UPDATE_MASK_BITN 4
#define AON_BATMON_EVENTMASK_BATT_UPDATE_MASK_M 0x00000010
#define AON_BATMON_EVENTMASK_BATT_UPDATE_MASK_S 4
// Field: [3] TEMP_BELOW_LL_MASK
//
// 1: EVENT.TEMP_BELOW_LL contributes to combined event from BATMON
// 0: EVENT.TEMP_BELOW_LL does not contribute to combined event from BATMON
#define AON_BATMON_EVENTMASK_TEMP_BELOW_LL_MASK 0x00000008
#define AON_BATMON_EVENTMASK_TEMP_BELOW_LL_MASK_BITN 3
#define AON_BATMON_EVENTMASK_TEMP_BELOW_LL_MASK_M 0x00000008
#define AON_BATMON_EVENTMASK_TEMP_BELOW_LL_MASK_S 3
// Field: [2] TEMP_OVER_UL_MASK
//
// 1: EVENT.TEMP_OVER_UL contributes to combined event from BATMON
// 0: EVENT.TEMP_OVER_UL does not contribute to combined event from BATMON
#define AON_BATMON_EVENTMASK_TEMP_OVER_UL_MASK 0x00000004
#define AON_BATMON_EVENTMASK_TEMP_OVER_UL_MASK_BITN 2
#define AON_BATMON_EVENTMASK_TEMP_OVER_UL_MASK_M 0x00000004
#define AON_BATMON_EVENTMASK_TEMP_OVER_UL_MASK_S 2
// Field: [1] BATT_BELOW_LL_MASK
//
// 1: EVENT.BATT_BELOW_LL contributes to combined event from BATMON
// 0: EVENT.BATT_BELOW_LL does not contribute to combined event from BATMON
#define AON_BATMON_EVENTMASK_BATT_BELOW_LL_MASK 0x00000002
#define AON_BATMON_EVENTMASK_BATT_BELOW_LL_MASK_BITN 1
#define AON_BATMON_EVENTMASK_BATT_BELOW_LL_MASK_M 0x00000002
#define AON_BATMON_EVENTMASK_BATT_BELOW_LL_MASK_S 1
// Field: [0] BATT_OVER_UL_MASK
//
// 1: EVENT.BATT_OVER_UL contributes to combined event from BATMON
// 0: EVENT.BATT_OVER_UL does not contribute to combined event from BATMON
#define AON_BATMON_EVENTMASK_BATT_OVER_UL_MASK 0x00000001
#define AON_BATMON_EVENTMASK_BATT_OVER_UL_MASK_BITN 0
#define AON_BATMON_EVENTMASK_BATT_OVER_UL_MASK_M 0x00000001
#define AON_BATMON_EVENTMASK_BATT_OVER_UL_MASK_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_EVENT
//
//*****************************************************************************
// Field: [5] TEMP_UPDATE
//
// Alias to TEMPUPD.STAT
#define AON_BATMON_EVENT_TEMP_UPDATE 0x00000020
#define AON_BATMON_EVENT_TEMP_UPDATE_BITN 5
#define AON_BATMON_EVENT_TEMP_UPDATE_M 0x00000020
#define AON_BATMON_EVENT_TEMP_UPDATE_S 5
// Field: [4] BATT_UPDATE
//
// Alias to BATUPD.STAT
#define AON_BATMON_EVENT_BATT_UPDATE 0x00000010
#define AON_BATMON_EVENT_BATT_UPDATE_BITN 4
#define AON_BATMON_EVENT_BATT_UPDATE_M 0x00000010
#define AON_BATMON_EVENT_BATT_UPDATE_S 4
// Field: [3] TEMP_BELOW_LL
//
// Read:
// 1: Temperature level is below the lower limit set by TEMPLL.
// 0: Temperature level is not below the lower limit set by TEMPLL.
// Write:
// 1: Clears the flag
// 0: No change in the flag
#define AON_BATMON_EVENT_TEMP_BELOW_LL 0x00000008
#define AON_BATMON_EVENT_TEMP_BELOW_LL_BITN 3
#define AON_BATMON_EVENT_TEMP_BELOW_LL_M 0x00000008
#define AON_BATMON_EVENT_TEMP_BELOW_LL_S 3
// Field: [2] TEMP_OVER_UL
//
// Read:
// 1: Temperature level is above the upper limit set by TEMPUL.
// 0: Temperature level is not above the upper limit set by TEMPUL.
// Write:
// 1: Clears the flag
// 0: No change in the flag
#define AON_BATMON_EVENT_TEMP_OVER_UL 0x00000004
#define AON_BATMON_EVENT_TEMP_OVER_UL_BITN 2
#define AON_BATMON_EVENT_TEMP_OVER_UL_M 0x00000004
#define AON_BATMON_EVENT_TEMP_OVER_UL_S 2
// Field: [1] BATT_BELOW_LL
//
// Read:
// 1: Battery level is below the lower limit set by BATTLL.
// 0: Battery level is not below the lower limit set by BATTLL.
// Write:
// 1: Clears the flag
// 0: No change in the flag
#define AON_BATMON_EVENT_BATT_BELOW_LL 0x00000002
#define AON_BATMON_EVENT_BATT_BELOW_LL_BITN 1
#define AON_BATMON_EVENT_BATT_BELOW_LL_M 0x00000002
#define AON_BATMON_EVENT_BATT_BELOW_LL_S 1
// Field: [0] BATT_OVER_UL
//
// Read:
// 1: Battery level is above the upper limit set by BATTUL.
// 0: Battery level is not above the upper limit set by BATTUL.
// Write:
// 1: Clears the flag
// 0: No change in the flag
#define AON_BATMON_EVENT_BATT_OVER_UL 0x00000001
#define AON_BATMON_EVENT_BATT_OVER_UL_BITN 0
#define AON_BATMON_EVENT_BATT_OVER_UL_M 0x00000001
#define AON_BATMON_EVENT_BATT_OVER_UL_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_BATTUL
//
//*****************************************************************************
// Field: [10:8] INT
//
// Integer part:
//
// 0x0: 0V + fractional part
// ...
// 0x3: 3V + fractional part
// 0x4: 4V + fractional part
#define AON_BATMON_BATTUL_INT_W 3
#define AON_BATMON_BATTUL_INT_M 0x00000700
#define AON_BATMON_BATTUL_INT_S 8
// Field: [7:0] FRAC
//
// Fractional part, standard binary fractional encoding.
//
// 0x00: .0V
// ...
// 0x20: 1/8 = .125V
// 0x40: 1/4 = .25V
// 0x80: 1/2 = .5V
// ...
// 0xA0: 1/2 + 1/8 = .625V
// ...
// 0xFF: Max
#define AON_BATMON_BATTUL_FRAC_W 8
#define AON_BATMON_BATTUL_FRAC_M 0x000000FF
#define AON_BATMON_BATTUL_FRAC_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_BATTLL
//
//*****************************************************************************
// Field: [10:8] INT
//
// Integer part:
//
// 0x0: 0V + fractional part
// ...
// 0x3: 3V + fractional part
// 0x4: 4V + fractional part
#define AON_BATMON_BATTLL_INT_W 3
#define AON_BATMON_BATTLL_INT_M 0x00000700
#define AON_BATMON_BATTLL_INT_S 8
// Field: [7:0] FRAC
//
// Fractional part, standard binary fractional encoding.
//
// 0x00: .0V
// ...
// 0x20: 1/8 = .125V
// 0x40: 1/4 = .25V
// 0x80: 1/2 = .5V
// ...
// 0xA0: 1/2 + 1/8 = .625V
// ...
// 0xFF: Max
#define AON_BATMON_BATTLL_FRAC_W 8
#define AON_BATMON_BATTLL_FRAC_M 0x000000FF
#define AON_BATMON_BATTLL_FRAC_S 0
//*****************************************************************************
//
// Register: AON_BATMON_O_TEMPUL
//
//*****************************************************************************
// Field: [16:8] INT
//
// Integer part (signed) of temperature upper limit.
// Total value = INTEGER + FRACTIONAL
// 2's complement encoding
//
// 0x100: Min value
// 0x1D8: -40C
// 0x1FF: -1C
// 0x00: 0C
// 0x1B: 27C
// 0x55: 85C
// 0xFF: Max value
#define AON_BATMON_TEMPUL_INT_W 9
#define AON_BATMON_TEMPUL_INT_M 0x0001FF00
#define AON_BATMON_TEMPUL_INT_S 8
// Field: [7:6] FRAC
//
// Fractional part of temperature upper limit.
// Total value = INTEGER + FRACTIONAL
// The encoding is an extension of the 2's complement encoding.
//
// 00: 0.0C
// 01: 0.25C
// 10: 0.5C
// 11: 0.75C
//
// For example:
// 000000001,00 = ( 1+0,00) = 1,00
// 000000000,11 = ( 0+0,75) = 0,75
// 000000000,10 = ( 0+0,50) = 0,50
// 000000000,01 = ( 0+0,25) = 0,25
// 000000000,00 = ( 0+0,00) = 0,00
// 111111111,11 = (-1+0,75) = -0,25
// 111111111,10 = (-1+0,50) = -0,50
// 111111111,01 = (-1+0,25) = -0,75
// 111111111,00 = (-1+0,00) = -1,00
// 111111110,11 = (-2+0,75) = -1,25
#define AON_BATMON_TEMPUL_FRAC_W 2
#define AON_BATMON_TEMPUL_FRAC_M 0x000000C0
#define AON_BATMON_TEMPUL_FRAC_S 6
//*****************************************************************************
//
// Register: AON_BATMON_O_TEMPLL
//
//*****************************************************************************
// Field: [16:8] INT
//
// Integer part (signed) of temperature lower limit.
// Total value = INTEGER + FRACTIONAL
// 2's complement encoding
//
// 0x100: Min value
// 0x1D8: -40C
// 0x1FF: -1C
// 0x00: 0C
// 0x1B: 27C
// 0x55: 85C
// 0xFF: Max value
#define AON_BATMON_TEMPLL_INT_W 9
#define AON_BATMON_TEMPLL_INT_M 0x0001FF00
#define AON_BATMON_TEMPLL_INT_S 8
// Field: [7:6] FRAC
//
// Fractional part of temperature lower limit.
// Total value = INTEGER + FRACTIONAL
// The encoding is an extension of the 2's complement encoding.
//
// 00: 0.0C
// 01: 0.25C
// 10: 0.5C
// 11: 0.75C
//
// For example:
// 000000001,00 = ( 1+0,00) = 1,00
// 000000000,11 = ( 0+0,75) = 0,75
// 000000000,10 = ( 0+0,50) = 0,50
// 000000000,01 = ( 0+0,25) = 0,25
// 000000000,00 = ( 0+0,00) = 0,00
// 111111111,11 = (-1+0,75) = -0,25
// 111111111,10 = (-1+0,50) = -0,50
// 111111111,01 = (-1+0,25) = -0,75
// 111111111,00 = (-1+0,00) = -1,00
// 111111110,11 = (-2+0,75) = -1,25
#define AON_BATMON_TEMPLL_FRAC_W 2
#define AON_BATMON_TEMPLL_FRAC_M 0x000000C0
#define AON_BATMON_TEMPLL_FRAC_S 6
#endif // __AON_BATMON__