| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #ifndef _FSL_SAI_EDMA_H_ |
| #define _FSL_SAI_EDMA_H_ |
| |
| #include "fsl_sai.h" |
| #include "fsl_edma.h" |
| |
| /*! |
| * @addtogroup sai_edma |
| * @{ |
| */ |
| |
| /******************************************************************************* |
| * Definitions |
| ******************************************************************************/ |
| |
| typedef struct _sai_edma_handle sai_edma_handle_t; |
| |
| /*! @brief SAI eDMA transfer callback function for finish and error */ |
| typedef void (*sai_edma_callback_t)(I2S_Type *base, sai_edma_handle_t *handle, status_t status, void *userData); |
| |
| /*! @brief SAI DMA transfer handle, users should not touch the content of the handle.*/ |
| struct _sai_edma_handle |
| { |
| edma_handle_t *dmaHandle; /*!< DMA handler for SAI send */ |
| uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */ |
| uint8_t bytesPerFrame; /*!< Bytes in a frame */ |
| uint8_t channel; /*!< Which data channel */ |
| uint8_t count; /*!< The transfer data count in a DMA request */ |
| uint32_t state; /*!< Internal state for SAI eDMA transfer */ |
| sai_edma_callback_t callback; /*!< Callback for users while transfer finish or error occurs */ |
| void *userData; /*!< User callback parameter */ |
| edma_tcd_t tcd[SAI_XFER_QUEUE_SIZE + 1U]; /*!< TCD pool for eDMA transfer. */ |
| sai_transfer_t saiQueue[SAI_XFER_QUEUE_SIZE]; /*!< Transfer queue storing queued transfer. */ |
| size_t transferSize[SAI_XFER_QUEUE_SIZE]; /*!< Data bytes need to transfer */ |
| volatile uint8_t queueUser; /*!< Index for user to queue transfer. */ |
| volatile uint8_t queueDriver; /*!< Index for driver to get the transfer data and size */ |
| }; |
| |
| /******************************************************************************* |
| * APIs |
| ******************************************************************************/ |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| /*! |
| * @name eDMA Transactional |
| * @{ |
| */ |
| |
| /*! |
| * @brief Initializes the SAI eDMA handle. |
| * |
| * This function initializes the SAI master DMA handle, which can be used for other SAI master transactional APIs. |
| * Usually, for a specified SAI instance, call this API once to get the initialized handle. |
| * |
| * @param base SAI base pointer. |
| * @param handle SAI eDMA handle pointer. |
| * @param base SAI peripheral base address. |
| * @param callback Pointer to user callback function. |
| * @param userData User parameter passed to the callback function. |
| * @param dmaHandle eDMA handle pointer, this handle shall be static allocated by users. |
| */ |
| void SAI_TransferTxCreateHandleEDMA( |
| I2S_Type *base, sai_edma_handle_t *handle, sai_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle); |
| |
| /*! |
| * @brief Initializes the SAI Rx eDMA handle. |
| * |
| * This function initializes the SAI slave DMA handle, which can be used for other SAI master transactional APIs. |
| * Usually, for a specified SAI instance, call this API once to get the initialized handle. |
| * |
| * @param base SAI base pointer. |
| * @param handle SAI eDMA handle pointer. |
| * @param base SAI peripheral base address. |
| * @param callback Pointer to user callback function. |
| * @param userData User parameter passed to the callback function. |
| * @param dmaHandle eDMA handle pointer, this handle shall be static allocated by users. |
| */ |
| void SAI_TransferRxCreateHandleEDMA( |
| I2S_Type *base, sai_edma_handle_t *handle, sai_edma_callback_t callback, void *userData, edma_handle_t *dmaHandle); |
| |
| /*! |
| * @brief Configures the SAI Tx audio format. |
| * |
| * The audio format can be changed at run-time. This function configures the sample rate and audio data |
| * format to be transferred. This function also sets the eDMA parameter according to formatting requirements. |
| * |
| * @param base SAI base pointer. |
| * @param handle SAI eDMA handle pointer. |
| * @param format Pointer to SAI audio data format structure. |
| * @param mclkSourceClockHz SAI master clock source frequency in Hz. |
| * @param bclkSourceClockHz SAI bit clock source frequency in Hz. If bit clock source is master |
| * clock, this value should equals to masterClockHz in format. |
| * @retval kStatus_Success Audio format set successfully. |
| * @retval kStatus_InvalidArgument The input argument is invalid. |
| */ |
| void SAI_TransferTxSetFormatEDMA(I2S_Type *base, |
| sai_edma_handle_t *handle, |
| sai_transfer_format_t *format, |
| uint32_t mclkSourceClockHz, |
| uint32_t bclkSourceClockHz); |
| |
| /*! |
| * @brief Configures the SAI Rx audio format. |
| * |
| * The audio format can be changed at run-time. This function configures the sample rate and audio data |
| * format to be transferred. This function also sets the eDMA parameter according to formatting requirements. |
| * |
| * @param base SAI base pointer. |
| * @param handle SAI eDMA handle pointer. |
| * @param format Pointer to SAI audio data format structure. |
| * @param mclkSourceClockHz SAI master clock source frequency in Hz. |
| * @param bclkSourceClockHz SAI bit clock source frequency in Hz. If a bit clock source is the master |
| * clock, this value should equal to masterClockHz in format. |
| * @retval kStatus_Success Audio format set successfully. |
| * @retval kStatus_InvalidArgument The input argument is invalid. |
| */ |
| void SAI_TransferRxSetFormatEDMA(I2S_Type *base, |
| sai_edma_handle_t *handle, |
| sai_transfer_format_t *format, |
| uint32_t mclkSourceClockHz, |
| uint32_t bclkSourceClockHz); |
| |
| /*! |
| * @brief Performs a non-blocking SAI transfer using DMA. |
| * |
| * @note This interface returns immediately after the transfer initiates. Call |
| * SAI_GetTransferStatus to poll the transfer status and check whether the SAI transfer is finished. |
| * |
| * @param base SAI base pointer. |
| * @param handle SAI eDMA handle pointer. |
| * @param xfer Pointer to the DMA transfer structure. |
| * @retval kStatus_Success Start a SAI eDMA send successfully. |
| * @retval kStatus_InvalidArgument The input argument is invalid. |
| * @retval kStatus_TxBusy SAI is busy sending data. |
| */ |
| status_t SAI_TransferSendEDMA(I2S_Type *base, sai_edma_handle_t *handle, sai_transfer_t *xfer); |
| |
| /*! |
| * @brief Performs a non-blocking SAI receive using eDMA. |
| * |
| * @note This interface returns immediately after the transfer initiates. Call |
| * the SAI_GetReceiveRemainingBytes to poll the transfer status and check whether the SAI transfer is finished. |
| * |
| * @param base SAI base pointer |
| * @param handle SAI eDMA handle pointer. |
| * @param xfer Pointer to DMA transfer structure. |
| * @retval kStatus_Success Start a SAI eDMA receive successfully. |
| * @retval kStatus_InvalidArgument The input argument is invalid. |
| * @retval kStatus_RxBusy SAI is busy receiving data. |
| */ |
| status_t SAI_TransferReceiveEDMA(I2S_Type *base, sai_edma_handle_t *handle, sai_transfer_t *xfer); |
| |
| /*! |
| * @brief Aborts a SAI transfer using eDMA. |
| * |
| * @param base SAI base pointer. |
| * @param handle SAI eDMA handle pointer. |
| */ |
| void SAI_TransferAbortSendEDMA(I2S_Type *base, sai_edma_handle_t *handle); |
| |
| /*! |
| * @brief Aborts a SAI receive using eDMA. |
| * |
| * @param base SAI base pointer |
| * @param handle SAI eDMA handle pointer. |
| */ |
| void SAI_TransferAbortReceiveEDMA(I2S_Type *base, sai_edma_handle_t *handle); |
| |
| /*! |
| * @brief Gets byte count sent by SAI. |
| * |
| * @param base SAI base pointer. |
| * @param handle SAI eDMA handle pointer. |
| * @param count Bytes count sent by SAI. |
| * @retval kStatus_Success Succeed get the transfer count. |
| * @retval kStatus_NoTransferInProgress There is no non-blocking transaction in progress. |
| */ |
| status_t SAI_TransferGetSendCountEDMA(I2S_Type *base, sai_edma_handle_t *handle, size_t *count); |
| |
| /*! |
| * @brief Gets byte count received by SAI. |
| * |
| * @param base SAI base pointer |
| * @param handle SAI eDMA handle pointer. |
| * @param count Bytes count received by SAI. |
| * @retval kStatus_Success Succeed get the transfer count. |
| * @retval kStatus_NoTransferInProgress There is no non-blocking transaction in progress. |
| */ |
| status_t SAI_TransferGetReceiveCountEDMA(I2S_Type *base, sai_edma_handle_t *handle, size_t *count); |
| |
| /*! @} */ |
| |
| #if defined(__cplusplus) |
| } |
| #endif |
| |
| /*! |
| * @} |
| */ |
| #endif |