blob: 525ea60537cb7b534f390ec05eda2e4183129601 [file] [log] [blame]
/*
* Copyright (c) 2021 Tokita, Hiroshi <tokita.hiroshi@gmail.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/timer/riscv-machine-timer.h>
#include <zephyr/dt-bindings/i2c/i2c.h>
#include <zephyr/dt-bindings/pwm/pwm.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu: cpu@0 {
clock-frequency = <108000000>;
mcause-exception-mask = <0x7ff>;
compatible = "nuclei,bumblebee", "riscv";
device_type = "cpu";
reg = <0>;
};
};
sram0: memory@20000000 {
compatible = "mmio-sram";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "gd,gd32vf103-soc", "simple-bus";
ranges;
mtimer: machine-timer@d1000000 {
compatible = "riscv,machine-timer";
reg = <0xd1000000 0x1
0xd1000008 0x1>;
clk-divider = <RISCV_MACHINE_TIMER_DIVIDER_4>;
};
eclic: interrupt-controller@d2000000 {
#interrupt-cells = <2>;
compatible = "nuclei,eclic";
interrupt-controller;
reg = <0xd2000000 0x0001
0xd2000004 0x0004
0xd200000b 0x0001
0xd2001000 0x1000>;
label = "NUCLEI_ECLIC";
};
fmc: flash-controller@40022000 {
compatible = "gd,gd32-flash-controller";
label = "FMC";
reg = <0x40022000 0x400>;
#address-cells = <1>;
#size-cells = <1>;
flash0: flash@8000000 {
compatible = "soc-nv-flash";
label = "FLASH0";
write-block-size = <2>;
};
};
usart0: serial@40013800 {
compatible = "gd,gd32-usart";
reg = <0x40013800 0x400>;
interrupts = <56 0>;
interrupt-parent = <&eclic>;
rcu-periph-clock = <0x60e>;
status = "disabled";
label = "UART_0";
};
usart1: serial@40004400 {
compatible = "gd,gd32-usart";
reg = <0x40004400 0x400>;
interrupts = <57 0>;
interrupt-parent = <&eclic>;
rcu-periph-clock = <0x711>;
status = "disabled";
label = "UART_1";
};
usart2: serial@40004800 {
compatible = "gd,gd32-usart";
reg = <0x40004800 0x400>;
interrupts = <58 0>;
interrupt-parent = <&eclic>;
rcu-periph-clock = <0x712>;
status = "disabled";
label = "UART_2";
};
dac: dac@40007400 {
compatible = "gd,gd32-dac";
reg = <0x40007400 0x400>;
rcu-periph-clock = <0x71d>;
num-channels = <2>;
label = "DAC";
status = "disabled";
#io-channel-cells = <1>;
};
i2c0: i2c@40005400 {
compatible = "gd,gd32-i2c";
reg = <0x40005400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <I2C_BITRATE_STANDARD>;
interrupts = <50 0>, <51 0>;
interrupt-names = "event", "error";
interrupt-parent = <&eclic>;
rcu-periph-clock = <0x715>;
status = "disabled";
label = "I2C_0";
};
spi0: spi@40013000 {
compatible = "gd,gd32-spi";
reg = <0x40013000 0x400>;
interrupts = <54 0>;
interrupt-parent = <&eclic>;
rcu-periph-clock = <0x60c>;
status = "disabled";
label = "SPI_0";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@40003800 {
compatible = "gd,gd32-spi";
reg = <0x40003800 0x400>;
interrupts = <55 0>;
interrupt-parent = <&eclic>;
rcu-periph-clock = <0x70e>;
status = "disabled";
label = "SPI_1";
#address-cells = <1>;
#size-cells = <0>;
};
afio: afio@40010000 {
compatible = "gd,gd32-afio";
reg = <0x40010000 0x400>;
rcu-periph-clock = <0x600>;
status = "okay";
label = "AFIO";
};
exti: interrupt-controller@40010400 {
compatible = "gd,gd32-exti";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x40010400 0x400>;
num-lines = <19>;
interrupt-parent = <&eclic>;
interrupts = <25 0>, <26 0>, <27 0>, <28 0>, <29 0>,
<42 0>, <59 0>;
interrupt-names = "line0", "line1", "line2", "line3",
"line4", "line5-9", "line10-15";
status = "okay";
label = "EXTI";
};
pinctrl: pin-controller@40010800 {
compatible = "gd,gd32-pinctrl-afio";
reg = <0x40010800 0x1c00>;
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
label = "PINCTRL";
gpioa: gpio@40010800 {
compatible = "gd,gd32-gpio";
reg = <0x40010800 0x400>;
gpio-controller;
#gpio-cells = <2>;
rcu-periph-clock = <0x602>;
status = "disabled";
label = "GPIOA";
};
gpiob: gpio@40010c00 {
compatible = "gd,gd32-gpio";
reg = <0x40010c00 0x400>;
gpio-controller;
#gpio-cells = <2>;
rcu-periph-clock = <0x603>;
status = "disabled";
label = "GPIOB";
};
gpioc: gpio@40011000 {
compatible = "gd,gd32-gpio";
reg = <0x40011000 0x400>;
gpio-controller;
#gpio-cells = <2>;
rcu-periph-clock = <0x604>;
status = "disabled";
label = "GPIOC";
};
gpiod: gpio@40011400 {
compatible = "gd,gd32-gpio";
reg = <0x40011400 0x400>;
gpio-controller;
#gpio-cells = <2>;
rcu-periph-clock = <0x605>;
status = "disabled";
label = "GPIOD";
};
gpioe: gpio@40011800 {
compatible = "gd,gd32-gpio";
reg = <0x40011800 0x400>;
gpio-controller;
#gpio-cells = <2>;
rcu-periph-clock = <0x606>;
status = "disabled";
label = "GPIOE";
};
};
timer0: timer@40012c00 {
compatible = "gd,gd32-timer";
reg = <0x40012c00 0x400>;
interrupt-parent = <&eclic>;
interrupts = <43 0>, <44 0>, <45 0>, <46 0>;
interrupt-names = "brk", "up", "trgcom", "cc";
rcu-periph-clock = <0x60b>;
rcu-periph-reset = <0x30b>;
is-advanced;
channels = <4>;
status = "disabled";
label = "TIMER_0";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_0";
#pwm-cells = <3>;
};
};
timer1: timer@40000000 {
compatible = "gd,gd32-timer";
reg = <0x40000000 0x400>;
interrupt-parent = <&eclic>;
interrupts = <47 0>;
interrupt-names = "global";
rcu-periph-clock = <0x700>;
rcu-periph-reset = <0x400>;
channels = <4>;
status = "disabled";
label = "TIMER_1";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_1";
#pwm-cells = <3>;
};
};
timer2: timer@40000400 {
compatible = "gd,gd32-timer";
reg = <0x40000400 0x400>;
interrupt-parent = <&eclic>;
interrupts = <48 0>;
interrupt-names = "global";
rcu-periph-clock = <0x701>;
rcu-periph-reset = <0x401>;
channels = <4>;
status = "disabled";
label = "TIMER_2";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_2";
#pwm-cells = <3>;
};
};
timer3: timer@40000800 {
compatible = "gd,gd32-timer";
reg = <0x40000800 0x400>;
interrupt-parent = <&eclic>;
interrupts = <49 0>;
interrupt-names = "global";
rcu-periph-clock = <0x702>;
rcu-periph-reset = <0x402>;
channels = <4>;
status = "disabled";
label = "TIMER_3";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_3";
#pwm-cells = <3>;
};
};
timer4: timer@40000c00 {
compatible = "gd,gd32-timer";
reg = <0x40000c00 0x400>;
interrupt-parent = <&eclic>;
interrupts = <69 0>;
interrupt-names = "global";
rcu-periph-clock = <0x703>;
rcu-periph-reset = <0x403>;
channels = <4>;
status = "disabled";
label = "TIMER_4";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_4";
#pwm-cells = <3>;
};
};
timer5: timer@40001000 {
compatible = "gd,gd32-timer";
reg = <0x40001000 0x400>;
interrupt-parent = <&eclic>;
interrupts = <73 0>;
interrupt-names = "global";
rcu-periph-clock = <0x704>;
rcu-periph-reset = <0x404>;
channels = <0>;
status = "disabled";
label = "TIMER_5";
};
timer6: timer@40001400 {
compatible = "gd,gd32-timer";
reg = <0x40001400 0x400>;
interrupt-parent = <&eclic>;
interrupts = <74 0>;
interrupt-names = "global";
rcu-periph-clock = <0x705>;
rcu-periph-reset = <0x405>;
channels = <0>;
status = "disabled";
label = "TIMER_6";
};
};
};