| /* |
| * Copyright (c) 2018, Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <drivers/spi.h> |
| #include <nrfx_spis.h> |
| |
| #define LOG_DOMAIN "spi_nrfx_spis" |
| #define LOG_LEVEL CONFIG_SPI_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(spi_nrfx_spis); |
| |
| #include "spi_context.h" |
| |
| struct spi_nrfx_data { |
| struct spi_context ctx; |
| }; |
| |
| struct spi_nrfx_config { |
| nrfx_spis_t spis; |
| size_t max_buf_len; |
| }; |
| |
| static inline nrf_spis_mode_t get_nrf_spis_mode(uint16_t operation) |
| { |
| if (SPI_MODE_GET(operation) & SPI_MODE_CPOL) { |
| if (SPI_MODE_GET(operation) & SPI_MODE_CPHA) { |
| return NRF_SPIS_MODE_3; |
| } else { |
| return NRF_SPIS_MODE_2; |
| } |
| } else { |
| if (SPI_MODE_GET(operation) & SPI_MODE_CPHA) { |
| return NRF_SPIS_MODE_1; |
| } else { |
| return NRF_SPIS_MODE_0; |
| } |
| } |
| } |
| |
| static inline nrf_spis_bit_order_t get_nrf_spis_bit_order(uint16_t operation) |
| { |
| if (operation & SPI_TRANSFER_LSB) { |
| return NRF_SPIS_BIT_ORDER_LSB_FIRST; |
| } else { |
| return NRF_SPIS_BIT_ORDER_MSB_FIRST; |
| } |
| } |
| |
| static int configure(const struct device *dev, |
| const struct spi_config *spi_cfg) |
| { |
| const struct spi_nrfx_config *config = dev->config; |
| struct spi_nrfx_data *data = dev->data; |
| struct spi_context *ctx = &data->ctx; |
| |
| if (spi_context_configured(ctx, spi_cfg)) { |
| /* Already configured. No need to do it again. */ |
| return 0; |
| } |
| |
| if (spi_cfg->operation & SPI_HALF_DUPLEX) { |
| LOG_ERR("Half-duplex not supported"); |
| return -ENOTSUP; |
| } |
| |
| if (SPI_OP_MODE_GET(spi_cfg->operation) == SPI_OP_MODE_MASTER) { |
| LOG_ERR("Master mode is not supported on %s", dev->name); |
| return -EINVAL; |
| } |
| |
| if (spi_cfg->operation & SPI_MODE_LOOP) { |
| LOG_ERR("Loopback mode is not supported"); |
| return -EINVAL; |
| } |
| |
| if (IS_ENABLED(CONFIG_SPI_EXTENDED_MODES) && |
| (spi_cfg->operation & SPI_LINES_MASK) != SPI_LINES_SINGLE) { |
| LOG_ERR("Only single line mode is supported"); |
| return -EINVAL; |
| } |
| |
| if (SPI_WORD_SIZE_GET(spi_cfg->operation) != 8) { |
| LOG_ERR("Word sizes other than 8 bits are not supported"); |
| return -EINVAL; |
| } |
| |
| if (spi_cfg->cs) { |
| LOG_ERR("CS control via GPIO is not supported"); |
| return -EINVAL; |
| } |
| |
| ctx->config = spi_cfg; |
| |
| nrf_spis_configure(config->spis.p_reg, |
| get_nrf_spis_mode(spi_cfg->operation), |
| get_nrf_spis_bit_order(spi_cfg->operation)); |
| |
| return 0; |
| } |
| |
| static void prepare_for_transfer(const struct device *dev, |
| const uint8_t *tx_buf, size_t tx_buf_len, |
| uint8_t *rx_buf, size_t rx_buf_len) |
| { |
| struct spi_nrfx_data *dev_data = dev->data; |
| const struct spi_nrfx_config *dev_config = dev->config; |
| int status; |
| |
| if (tx_buf_len > dev_config->max_buf_len || |
| rx_buf_len > dev_config->max_buf_len) { |
| LOG_ERR("Invalid buffer sizes: Tx %d/Rx %d", |
| tx_buf_len, rx_buf_len); |
| status = -EINVAL; |
| } else { |
| nrfx_err_t result; |
| |
| result = nrfx_spis_buffers_set(&dev_config->spis, |
| tx_buf, tx_buf_len, |
| rx_buf, rx_buf_len); |
| if (result == NRFX_SUCCESS) { |
| return; |
| } |
| |
| status = -EIO; |
| } |
| |
| spi_context_complete(&dev_data->ctx, status); |
| } |
| |
| |
| static int transceive(const struct device *dev, |
| const struct spi_config *spi_cfg, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| bool asynchronous, |
| struct k_poll_signal *signal) |
| { |
| struct spi_nrfx_data *dev_data = dev->data; |
| int error; |
| |
| spi_context_lock(&dev_data->ctx, asynchronous, signal, spi_cfg); |
| |
| error = configure(dev, spi_cfg); |
| if (error != 0) { |
| /* Invalid configuration. */ |
| } else if ((tx_bufs && tx_bufs->count > 1) || |
| (rx_bufs && rx_bufs->count > 1)) { |
| LOG_ERR("Scattered buffers are not supported"); |
| error = -ENOTSUP; |
| } else if (tx_bufs && tx_bufs->buffers[0].len && |
| !nrfx_is_in_ram(tx_bufs->buffers[0].buf)) { |
| LOG_ERR("Only buffers located in RAM are supported"); |
| error = -ENOTSUP; |
| } else { |
| prepare_for_transfer(dev, |
| tx_bufs ? tx_bufs->buffers[0].buf : NULL, |
| tx_bufs ? tx_bufs->buffers[0].len : 0, |
| rx_bufs ? rx_bufs->buffers[0].buf : NULL, |
| rx_bufs ? rx_bufs->buffers[0].len : 0); |
| |
| error = spi_context_wait_for_completion(&dev_data->ctx); |
| } |
| |
| spi_context_release(&dev_data->ctx, error); |
| |
| return error; |
| } |
| |
| static int spi_nrfx_transceive(const struct device *dev, |
| const struct spi_config *spi_cfg, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs) |
| { |
| return transceive(dev, spi_cfg, tx_bufs, rx_bufs, false, NULL); |
| } |
| |
| #ifdef CONFIG_SPI_ASYNC |
| static int spi_nrfx_transceive_async(const struct device *dev, |
| const struct spi_config *spi_cfg, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| struct k_poll_signal *async) |
| { |
| return transceive(dev, spi_cfg, tx_bufs, rx_bufs, true, async); |
| } |
| #endif /* CONFIG_SPI_ASYNC */ |
| |
| static int spi_nrfx_release(const struct device *dev, |
| const struct spi_config *spi_cfg) |
| { |
| struct spi_nrfx_data *dev_data = dev->data; |
| |
| if (!spi_context_configured(&dev_data->ctx, spi_cfg)) { |
| return -EINVAL; |
| } |
| |
| spi_context_unlock_unconditionally(&dev_data->ctx); |
| |
| return 0; |
| } |
| |
| static const struct spi_driver_api spi_nrfx_driver_api = { |
| .transceive = spi_nrfx_transceive, |
| #ifdef CONFIG_SPI_ASYNC |
| .transceive_async = spi_nrfx_transceive_async, |
| #endif |
| .release = spi_nrfx_release, |
| }; |
| |
| |
| static void event_handler(const nrfx_spis_evt_t *p_event, void *p_context) |
| { |
| struct spi_nrfx_data *dev_data = p_context; |
| |
| if (p_event->evt_type == NRFX_SPIS_XFER_DONE) { |
| spi_context_complete(&dev_data->ctx, p_event->rx_amount); |
| } |
| } |
| |
| static int init_spis(const struct device *dev, |
| const nrfx_spis_config_t *config) |
| { |
| const struct spi_nrfx_config *dev_config = dev->config; |
| struct spi_nrfx_data *dev_data = dev->data; |
| /* This sets only default values of mode and bit order. The ones to be |
| * actually used are set in configure() when a transfer is prepared. |
| */ |
| nrfx_err_t result = nrfx_spis_init(&dev_config->spis, |
| config, |
| event_handler, |
| dev_data); |
| if (result != NRFX_SUCCESS) { |
| LOG_ERR("Failed to initialize device: %s", dev->name); |
| return -EBUSY; |
| } |
| |
| spi_context_unlock_unconditionally(&dev_data->ctx); |
| |
| return 0; |
| } |
| |
| /* |
| * Current factors requiring use of DT_NODELABEL: |
| * |
| * - NRFX_SPIS_INSTANCE() requires an SoC instance number |
| * - soc-instance-numbered kconfig enables |
| * - ORC is a SoC-instance-numbered kconfig option instead of a DT property |
| */ |
| |
| #define SPIS(idx) DT_NODELABEL(spi##idx) |
| #define SPIS_PROP(idx, prop) DT_PROP(SPIS(idx), prop) |
| |
| #define SPI_NRFX_SPIS_DEVICE(idx) \ |
| static int spi_##idx##_init(const struct device *dev) \ |
| { \ |
| IRQ_CONNECT(DT_IRQN(SPIS(idx)), DT_IRQ(SPIS(idx), priority), \ |
| nrfx_isr, nrfx_spis_##idx##_irq_handler, 0); \ |
| const nrfx_spis_config_t config = { \ |
| .sck_pin = SPIS_PROP(idx, sck_pin), \ |
| .mosi_pin = SPIS_PROP(idx, mosi_pin), \ |
| .miso_pin = SPIS_PROP(idx, miso_pin), \ |
| .csn_pin = SPIS_PROP(idx, csn_pin), \ |
| .mode = NRF_SPIS_MODE_0, \ |
| .bit_order = NRF_SPIS_BIT_ORDER_MSB_FIRST, \ |
| .csn_pullup = NRF_GPIO_PIN_NOPULL, \ |
| .miso_drive = NRF_GPIO_PIN_S0S1, \ |
| .orc = CONFIG_SPI_##idx##_NRF_ORC, \ |
| .def = SPIS_PROP(idx, def_char), \ |
| }; \ |
| return init_spis(dev, &config); \ |
| } \ |
| static struct spi_nrfx_data spi_##idx##_data = { \ |
| SPI_CONTEXT_INIT_LOCK(spi_##idx##_data, ctx), \ |
| SPI_CONTEXT_INIT_SYNC(spi_##idx##_data, ctx), \ |
| }; \ |
| static const struct spi_nrfx_config spi_##idx##z_config = { \ |
| .spis = NRFX_SPIS_INSTANCE(idx), \ |
| .max_buf_len = BIT_MASK(SPIS##idx##_EASYDMA_MAXCNT_SIZE), \ |
| }; \ |
| DEVICE_DT_DEFINE(SPIS(idx), \ |
| spi_##idx##_init, \ |
| NULL, \ |
| &spi_##idx##_data, \ |
| &spi_##idx##z_config, \ |
| POST_KERNEL, \ |
| CONFIG_SPI_INIT_PRIORITY, \ |
| &spi_nrfx_driver_api) |
| |
| #ifdef CONFIG_SPI_0_NRF_SPIS |
| SPI_NRFX_SPIS_DEVICE(0); |
| #endif |
| |
| #ifdef CONFIG_SPI_1_NRF_SPIS |
| SPI_NRFX_SPIS_DEVICE(1); |
| #endif |
| |
| #ifdef CONFIG_SPI_2_NRF_SPIS |
| SPI_NRFX_SPIS_DEVICE(2); |
| #endif |
| |
| #ifdef CONFIG_SPI_3_NRF_SPIS |
| SPI_NRFX_SPIS_DEVICE(3); |
| #endif |