| # STM32CUBE HAL config |
| |
| # Copyright (c) 2016 Linaro Limited. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config HAS_STM32LIB |
| bool |
| |
| config HAS_STM32CUBE |
| bool |
| select HAS_CMSIS_CORE |
| depends on SOC_FAMILY_STM32 |
| |
| if HAS_STM32CUBE |
| |
| config USE_STM32_HAL_ADC |
| bool |
| help |
| Enable STM32Cube Analog-to-Digital Converter (ADC) HAL module driver |
| |
| config USE_STM32_HAL_ADC_EX |
| bool |
| help |
| Enable STM32Cube Extended Analog-to-Digital Converter (ADC) HAL |
| module driver |
| |
| config USE_STM32_HAL_CAN |
| bool |
| help |
| Enable STM32Cube Controller Area Network (CAN) HAL module driver |
| |
| config USE_STM32_HAL_CEC |
| bool |
| help |
| Enable STM32Cube HDMI-CEC controller (CEC) HAL module driver |
| |
| config USE_STM32_HAL_COMP |
| bool |
| help |
| Enable STM32Cube Ultra Low Power Comparator channels (COMP) HAL module |
| driver |
| |
| config USE_STM32_HAL_CORTEX |
| bool |
| help |
| Enable STM32Cube CORTEX HAL module driver |
| |
| config USE_STM32_HAL_CRC |
| bool |
| help |
| Enable STM32Cube Cyclic redundancy check calculation unit (CRC) HAL |
| module driver |
| |
| config USE_STM32_HAL_CRC_EX |
| bool |
| help |
| Enable STM32Cube Extended Cyclic redundancy check calculation unit |
| (CRC) HAL module driver |
| |
| config USE_STM32_HAL_CRYP |
| bool |
| help |
| Enable STM32Cube Cryptographic processor (CRYP) HAL module driver |
| |
| config USE_STM32_HAL_CRYP_EX |
| bool |
| help |
| Enable STM32Cube Extended Cryptographic processor (CRYP) HAL module |
| driver |
| |
| config USE_STM32_HAL_DAC |
| bool |
| help |
| Enable STM32Cube Digital-to-analog converter (DAC) HAL module driver |
| |
| config USE_STM32_HAL_DAC_EX |
| bool |
| help |
| Enable STM32Cube Extended Digital-to-analog converter (DAC) HAL module |
| driver |
| |
| config USE_STM32_HAL_DCMI |
| bool |
| help |
| Enable STM32Cube Digital camera interface (DCM) HAL module driver |
| |
| config USE_STM32_HAL_DCMI_EX |
| bool |
| help |
| Enable STM32Cube Extended Digital camera interface (DCM) HAL module |
| driver |
| |
| config USE_STM32_HAL_DFSDM |
| bool |
| help |
| Enable STM32Cube Digital filter for sigma delta modulators (DFSDM) HAL |
| module driver |
| |
| config USE_STM32_HAL_DFSDM_EX |
| bool |
| help |
| Enable STM32Cube Extended Digital filter for sigma delta modulators |
| (DFSDM) HAL module driver |
| |
| config USE_STM32_HAL_DMA |
| bool |
| help |
| Enable STM32Cube Direct Memory Access controller (DMA) HAL module |
| driver |
| |
| config USE_STM32_HAL_DMA2D |
| bool |
| help |
| Enable STM32Cube Chrom-Art Accelerator™ controller (DMA2D) HAL module |
| driver |
| |
| config USE_STM32_HAL_DMA_EX |
| bool |
| help |
| Enable STM32Cube Extended Direct Memory Access controller (DMA) HAL |
| module driver |
| |
| config USE_STM32_HAL_DSI |
| bool |
| help |
| Enable STM32Cube Display Serial Interface Host (DSI) HAL module driver |
| |
| config USE_STM32_HAL_ETH |
| bool |
| help |
| Enable STM32Cube Ethernet (ETH) HAL module driver |
| |
| config USE_STM32_HAL_ETH_EX |
| bool |
| help |
| Enable STM32Cube Extended Ethernet (ETH) HAL module driver |
| |
| config USE_STM32_HAL_EXTI |
| bool |
| help |
| Enable STM32Cube Extended interrupt and event controller (EXTI) HAL |
| module driver |
| |
| config USE_STM32_HAL_FDCAN |
| bool |
| help |
| Enable STM32Cube Controller area network with flexible data rate |
| (FDCAN) HAL module driver |
| |
| config USE_STM32_HAL_FIREWALL |
| bool |
| help |
| Enable STM32Cube Firewall HAL module driver |
| |
| config USE_STM32_HAL_FLASH |
| bool |
| help |
| Enable STM32Cube Embedded Flash Memory (FLASH) HAL module driver |
| |
| config USE_STM32_HAL_FLASH_EX |
| bool |
| help |
| Enable STM32Cube Extended Embedded Flash Memory (FLASH) HAL module |
| driver |
| |
| config USE_STM32_HAL_FLASH_RAMFUNC |
| bool |
| help |
| Enable STM32Cube Embedded Flash Memory RAM functions (FLASH_RAMFUNC) |
| HAL module driver |
| |
| config USE_STM32_HAL_FMAC |
| bool |
| help |
| Enable STM32Cube Filter Math Accelerator (FMAC) HAL module driver |
| |
| config USE_STM32_HAL_FMPI2C |
| bool |
| help |
| Enable STM32Cube Fast-mode Plus Inter-integrated circuit (FMPI2C) |
| HAL module driver |
| |
| config USE_STM32_HAL_FMPI2C_EX |
| bool |
| help |
| Enable STM32Cube Extended Fast-mode Plus Inter-integrated circuit |
| (FMPI2C) HAL module driver |
| |
| config USE_STM32_HAL_GFXMMU |
| bool |
| help |
| Enable STM32Cube Chrom-GRCTM (GFXMMU) HAL module driver |
| |
| config USE_STM32_HAL_GPIO |
| bool |
| help |
| Enable STM32Cube General-purpose I/Os (GPIO) HAL module driver |
| |
| config USE_STM32_HAL_GPIO_EX |
| bool |
| help |
| Enable STM32Cube Extended General-purpose I/Os (GPIO) HAL module |
| driver |
| |
| config USE_STM32_HAL_HASH |
| bool |
| help |
| Enable STM32Cube Hash processor (HASH) HAL module driver |
| |
| config USE_STM32_HAL_HASH_EX |
| bool |
| help |
| Enable STM32Cube Extended Hash processor (HASH) HAL module driver |
| |
| config USE_STM32_HAL_HCD |
| bool |
| help |
| Enable STM32Cube Host Controller device (HCD) HAL module driver |
| |
| config USE_STM32_HAL_HRTIM |
| bool |
| help |
| Enable STM32Cube High-Resolution Timer (HRTIM) HAL module driver |
| |
| config USE_STM32_HAL_HSEM |
| bool |
| help |
| Enable STM32Cube Hardware Semaphore (HSEM) HAL module driver |
| |
| config USE_STM32_HAL_I2C |
| bool |
| help |
| Enable STM32Cube Inter-integrated circuit (I2C) interface HAL module |
| driver |
| |
| config USE_STM32_HAL_I2C_EX |
| bool |
| help |
| Enable STM32Cube Extended Inter-integrated circuit (I2C) interface HAL |
| module driver |
| |
| config USE_STM32_HAL_I2S |
| bool |
| help |
| Enable STM32Cube Inter-IC sound (I2S) HAL module driver |
| |
| config USE_STM32_HAL_I2S_EX |
| bool |
| help |
| Enable STM32Cube Etxended Inter-IC sound (I2S) HAL module driver |
| |
| config USE_STM32_HAL_IPCC |
| bool |
| help |
| Enable STM32Cube Inter-Processor communication controller (IPCC) HAL |
| module driver |
| |
| config USE_STM32_HAL_IRDA |
| bool |
| help |
| Enable STM32Cube Infrared Data Association (IRDA) HAL module driver |
| |
| config USE_STM32_HAL_IWDG |
| bool |
| help |
| Enable STM32Cube Independent watchdog (IWDG) HAL module driver |
| |
| config USE_STM32_HAL_JPEG |
| bool |
| help |
| Enable STM32Cube Jpeg codec (JPEG) HAL module driver |
| |
| config USE_STM32_HAL_LCD |
| bool |
| help |
| Enable STM32Cube LCD controller (LCD) HAL module driver |
| |
| config USE_STM32_HAL_LPTIM |
| bool |
| help |
| Enable STM32Cube Low Power Timer (LPTIM) HAL module driver |
| |
| config USE_STM32_HAL_LTDC |
| bool |
| help |
| Enable STM32Cube LCD-TFT controller (LTDC) HAL module driver |
| |
| config USE_STM32_HAL_LTDC_EX |
| bool |
| help |
| Enable STM32Cube Extended LCD-TFT controller (LTDC) HAL module driver |
| |
| config USE_STM32_HAL_MDIOS |
| bool |
| help |
| Enable STM32Cube Management data input/output (MDIOS) HAL module |
| driver |
| |
| config USE_STM32_HAL_MDMA |
| bool |
| help |
| Enable STM32Cube Master Direct Memory Access controller (MDMA) HAL |
| module driver |
| |
| config USE_STM32_HAL_MMC |
| bool |
| help |
| Enable STM32Cube MultiMediaCard interface (SDMMC) HAL module driver |
| |
| config USE_STM32_HAL_MMC_EX |
| bool |
| help |
| Enable STM32Cube Extended MultiMediaCard interface (SDMMC) HAL module |
| driver |
| |
| config USE_STM32_HAL_NAND |
| bool |
| help |
| Enable STM32Cube NAND Controller (NAND) HAL module driver |
| |
| config USE_STM32_HAL_NOR |
| bool |
| help |
| Enable STM32Cube NOR Controller (NOR) HAL module driver |
| |
| config USE_STM32_HAL_OPAMP |
| bool |
| help |
| Enable STM32Cube Operational amplifiers (OPAMP) HAL module driver |
| |
| config USE_STM32_HAL_OPAMP_EX |
| bool |
| help |
| Enable STM32Cube Extended Operational amplifiers (OPAMP) HAL module |
| driver |
| |
| config USE_STM32_HAL_OSPI |
| bool |
| help |
| Enable STM32Cube Octo-SPI interface (OSPI) HAL module driver |
| |
| config USE_STM32_HAL_PCCARD |
| bool |
| help |
| Enable STM32Cube PCCard memories (PCCARD) HAL module driver |
| |
| config USE_STM32_HAL_PCD |
| bool |
| help |
| Enable STM32Cube USB Peripheral Controller (PCD) HAL module driver |
| |
| config USE_STM32_HAL_PCD_EX |
| bool |
| help |
| Enable STM32Cube Extended USB Peripheral Controller (PCD) HAL module |
| driver |
| |
| config USE_STM32_HAL_PSSI |
| bool |
| help |
| Enable STM32Cube Parallel Synchronous Slave Interface (PSSI) |
| HAL module driver |
| |
| config USE_STM32_HAL_PWR |
| bool |
| help |
| Enable STM32Cube Power control (PWR) HAL module driver |
| |
| config USE_STM32_HAL_PWR_EX |
| bool |
| help |
| Enable STM32Cube Extended Power control (PWR) HAL module driver |
| |
| config USE_STM32_HAL_QSPI |
| bool |
| help |
| Enable STM32Cube Quad-SPI interface (QSPI) HAL module driver |
| |
| config USE_STM32_HAL_RAMECC |
| bool |
| help |
| Enable STM32Cube RAM ECC monitoring (RAMECC) HAL module driver |
| |
| config USE_STM32_HAL_RNG |
| bool |
| help |
| Enable STM32Cube True random number generator (RNG) HAL module driver |
| |
| config USE_STM32_HAL_RTC |
| bool |
| help |
| Enable STM32Cube Real-time clock (RTC) HAL module driver |
| |
| config USE_STM32_HAL_RTC_EX |
| bool |
| help |
| Enable STM32Cube Extended Real-time clock (RTC) HAL module driver |
| |
| config USE_STM32_HAL_SAI |
| bool |
| help |
| Enable STM32Cube Serial audio interface (SAI) HAL module driver |
| |
| config USE_STM32_HAL_SAI_EX |
| bool |
| help |
| Enable STM32Cube Extended Serial audio interface (SAI) HAL module |
| driver |
| |
| config USE_STM32_HAL_SD |
| bool |
| help |
| Enable STM32Cube Secure digital input/output MultiMediaCard interface |
| (SDMMC) HAL module driver |
| |
| config USE_STM32_HAL_SD_EX |
| bool |
| help |
| Enable STM32Cube Extended Secure digital input/output MultiMediaCard |
| interface (SDMMC) HAL module driver |
| |
| config USE_STM32_HAL_SDADC |
| bool |
| help |
| Enable STM32Cube SDADC HAL module driver |
| |
| config USE_STM32_HAL_SDRAM |
| bool |
| help |
| Enable STM32Cube SDRAM controller (SDRAM) HAL module driver |
| |
| config USE_STM32_HAL_SMARTCARD |
| bool |
| help |
| Enable STM32Cube Smartcard controller (SMARTCARD) HAL module driver |
| |
| config USE_STM32_HAL_SMARTCARD_EX |
| bool |
| help |
| Enable STM32Cube Extended Smartcard controller (SMARTCARD) HAL module |
| driver |
| |
| config USE_STM32_HAL_SMBUS |
| bool |
| help |
| Enable STM32Cube System Management Bus (SMBus) HAL module driver |
| |
| config USE_STM32_HAL_SPDIFRX |
| bool |
| help |
| Enable STM32Cube SPDIF receiver interface (SPDIFRX) HAL module driver |
| |
| config USE_STM32_HAL_SPI |
| bool |
| help |
| Enable STM32Cube Serial peripheral interface (SPI) HAL module driver |
| |
| config USE_STM32_HAL_SPI_EX |
| bool |
| help |
| Enable STM32Cube Extended Serial peripheral interface (SPI) HAL module |
| driver |
| |
| config USE_STM32_HAL_SRAM |
| bool |
| help |
| Enable STM32Cube SRAM controller (SRAM) HAL module driver |
| |
| config USE_STM32_HAL_SWPMI |
| bool |
| help |
| Enable STM32Cube Single Wire Protocol Master Interface (SWPMI) HAL |
| module |
| |
| config USE_STM32_HAL_TIM |
| bool |
| help |
| Enable STM32Cube Timer (TIM) HAL module driver |
| |
| config USE_STM32_HAL_TIM_EX |
| bool |
| help |
| Enable STM32Cube Extended Timer (TIM) HAL module driver |
| |
| config USE_STM32_HAL_TSC |
| bool |
| help |
| Enable STM32Cube Touch sensing controller (TSC) HAL module driver |
| |
| config USE_STM32_HAL_UART |
| bool |
| help |
| Enable STM32Cube Universal asynchronous receiver transmitter (USART) |
| HAL module driver |
| |
| config USE_STM32_HAL_UART_EX |
| bool |
| help |
| Enable STM32Cube Extended Universal asynchronous receiver transmitter |
| (USART) HAL module driver |
| |
| config USE_STM32_HAL_USART |
| bool |
| help |
| Enable STM32Cube Universal synchronous asynchronous receiver |
| transmitter (USART) HAL module driver |
| |
| config USE_STM32_HAL_USART_EX |
| bool |
| help |
| Enable STM32Cube Extended Universal synchronous asynchronous receiver |
| transmitter (USART) HAL module driver |
| |
| config USE_STM32_HAL_WWDG |
| bool |
| help |
| Enable STM32Cube System window watchdog (WWDG) HAL module driver |
| |
| config USE_STM32_LL_ADC |
| bool |
| help |
| Enable STM32Cube Analog-to-Digital Converter (ADC) LL module driver |
| |
| config USE_STM32_LL_BDMA |
| bool |
| help |
| Enable STM32Cube Basic direct memory access controller (BDMA) LL |
| module driver |
| |
| config USE_STM32_LL_COMP |
| bool |
| help |
| Enable STM32Cube Ultra Low Power Comparator channels (COMP) LL module |
| driver |
| |
| config USE_STM32_LL_CRC |
| bool |
| help |
| Enable STM32Cube Cyclic redundancy check calculation unit (CRC) LL |
| module driver |
| |
| config USE_STM32_LL_CRS |
| bool |
| help |
| Enable STM32Cube Clock recovery system (CRS) LL module driver |
| |
| config USE_STM32_LL_DAC |
| bool |
| help |
| Enable STM32Cube Digital-to-analog converter (DAC) LL module driver |
| |
| config USE_STM32_LL_DELAYBLOCK |
| bool |
| help |
| Enable STM32Cube DelayBlock (DELAYBLOCK) LL module driver |
| |
| config USE_STM32_LL_DMA |
| bool |
| help |
| Enable STM32Cube Direct Memory Access controller (DMA) LL module |
| driver |
| |
| config USE_STM32_LL_DMA2D |
| bool |
| help |
| Enable STM32Cube Chrom-Art Accelerator™ controller (DMA2D) LL module |
| driver |
| |
| config USE_STM32_LL_EXTI |
| bool |
| help |
| Enable STM32Cube Extended interrupt and event controller (EXTI) LL |
| module driver |
| |
| config USE_STM32_LL_FMAC |
| bool |
| help |
| Enable STM32Cube Filter Math Accelerator (FMAC) LL module driver |
| |
| config USE_STM32_LL_FMC |
| bool |
| help |
| Enable STM32Cube Flexible memory controller (FMC) LL module driver |
| |
| config USE_STM32_LL_FSMC |
| bool |
| help |
| Enable STM32Cube Flexible static memory controller (FSMC) LL module |
| driver |
| |
| config USE_STM32_LL_GPIO |
| bool |
| help |
| Enable STM32Cube Extended General-purpose I/Os (GPIO) LL module driver |
| |
| config USE_STM32_LL_HRTIM |
| bool |
| help |
| Enable STM32Cube High-Resolution Timer (HRTIM) LL module driver |
| |
| config USE_STM32_LL_I2C |
| bool |
| help |
| Enable STM32Cube Inter-integrated circuit (I2C) interface LL module |
| driver |
| |
| config USE_STM32_LL_IPCC |
| bool |
| help |
| Enable STM32Cube Inter-Processor communication controller (IPCC) LL |
| module driver |
| |
| config USE_STM32_LL_LPTIM |
| bool |
| help |
| Enable STM32Cube Low Power Timer (LPTIM) LL module driver |
| |
| config USE_STM32_LL_LPUART |
| bool |
| help |
| Enable STM32Cube Low-power universal asynchronous receiver |
| transmitter (LPUART) LL module driver |
| |
| config USE_STM32_LL_MDMA |
| bool |
| help |
| Enable STM32Cube Master Direct Memory Access controller (MDMA) LL |
| module driver |
| |
| config USE_STM32_LL_OPAMP |
| bool |
| help |
| Enable STM32Cube Operational amplifiers (OPAMP) LL module driver |
| |
| config USE_STM32_LL_PWR |
| bool |
| help |
| Enable STM32Cube Power control (PWR) LL module driver |
| |
| config USE_STM32_LL_RCC |
| bool |
| help |
| Enable STM32Cube Reset and Clock Control (RCC) LL module driver |
| |
| config USE_STM32_LL_RNG |
| bool |
| help |
| Enable STM32Cube True random number generator (RNG) LL module driver |
| |
| config USE_STM32_LL_RTC |
| bool |
| help |
| Enable STM32Cube Real-time clock (RTC) LL module driver |
| |
| config USE_STM32_LL_SDMMC |
| bool |
| help |
| Enable STM32Cube SD/SDIO/MMC card host interface (SDMMC) LL module |
| driver |
| |
| config USE_STM32_LL_SPI |
| bool |
| help |
| Enable STM32Cube Serial peripheral interface (SPI) LL module driver |
| |
| config USE_STM32_LL_SWPMI |
| bool |
| help |
| Enable STM32Cube Single Wire Protocol Master Interface (SWPMI) LL |
| module driver |
| |
| config USE_STM32_LL_TIM |
| bool |
| help |
| Enable STM32Cube Timer (TIM) LL module driver |
| |
| config USE_STM32_LL_UCPD |
| bool |
| help |
| Enable STM32Cube USB Power Delivery device interface |
| (UCPD) LL module driver |
| |
| config USE_STM32_LL_USART |
| bool |
| help |
| Enable STM32Cube Universal synchronous asynchronous receiver |
| transmitter (USART) LL module driver |
| |
| config USE_STM32_LL_USB |
| bool |
| help |
| Enable STM32Cube Universal serial bus full-speed device interface |
| (USB) LL module driver |
| |
| config USE_STM32_LL_UTILS |
| bool |
| help |
| Enable STM32Cube Utility functions (UTILS) LL module driver |
| |
| endif # HAS_STM32CUBE |
